Incoming Email settings is not visible for SharePoint SkyDrive.
Incoming Email settings is not visible for SharePoint SkyDrive. Is this the expected behaviour or is there any workaround to resolve this?
Hi,
I have tested the issue in my environment, there is no incoming email setting in my OneDrive library setting. It seems like it is by design.
Thanks for the understanding.
Regards,
Rebecca Tu
TechNet Community Support
Similar Messages
-
Incoming email Settings is not working
I have configured Incoming Email Settings by using msdn link
http://technet.microsoft.com/en-us/library/cc262947(v=office.15).aspx#ConfigureDropFolderPerms .I cannot recieve emails in my document library ,mailroot/drop folder is empty.I am not able to trace issue.Please suggestHi Refer thhe links
http://social.technet.microsoft.com/Forums/sharepoint/en-US/3d27cfd7-d4cd-4fb8-9899-d30bc7764a27/incoming-email-settings-not-working
http://social.technet.microsoft.com/Forums/sharepoint/en-US/3d27cfd7-d4cd-4fb8-9899-d30bc7764a27/incoming-email-settings-not-working?forum=sharepointadminprevious
http://social.technet.microsoft.com/Forums/sharepoint/en-US/c0e39e97-9113-4de8-9b72-137c594a4dfe/incoming-email-settings?forum=sharepointgeneralprevious
http://social.technet.microsoft.com/Forums/sharepoint/en-US/c3beaade-056b-48d2-8063-f4dabe60ff70/cant-get-incoming-email-settings-to-work?forum=sharepointadminlegacy
Please remember to click 'Mark as Answer' on the answer if it helps you -
Incoming Email Settings for the libraries in My Sites and Personal Sites
Hello Friends,
I'm currently working on SharePoint 2013 implementation where My Sites have been configured in a separate web application and personal sites are being stored under same web application.
Ex: My Site Host : http://mysite.abc.com
All Personal sites: http://mysite.abc.com/Personal/firstname_lastname
These are the challenges I'm facing...
1. I enabled Incoming Emails for one of the document library in My Site host but not receiving emails. (All settings are properly configured, document libraries in other sites (team sites) are getting emails.). I doubt the problem is only with my site template.
2. Incoming Email Settings are not appearing in "one Drive" document library in my personal site( which is "Documents" library in personal site). So I added Email event as stated here and here
and settings are started appearing, but I can enter only email address as other settings are not appearing. Here also I'm facing the same problem.
Kindly share ideas if any.
Thanks!!
Manjunath
-ManjunathHi,
It is encourage that you to use another library in another site template:
http://davecoleman146.com/2010/10/27/how-to-setup-mail-enabled-document-libraries-in-sharepoint-2010-part-4/
http://sharepointgeorge.com/2010/configuring-incoming-email-sharepoint-2010/
Please be notice: The e-mail drop folder setting is not available in automatic mode, because that mode automatically sets the e-mail drop folder to the folder that is specified by the SMTP service. (https://technet.microsoft.com/en-us/library/cc263260.aspx#section3)
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Incoming email settings for a dropoff library & content organizer rules in SharePoint 2013
I have configured an incoming email setting for a drop off library,I need to save original email also.Following are the issues:
1)Two attachments are getting uploaded for an email , Email(.eml file) as well as the attached file .I just want to save the email part as it is already containing the attachment
2)In Mozilla i can see the popup for for opening the .eml file while in IE it is directly opening in browser ,is it possible to show popup in IE?
3)I want to write content organizer rules depending upon the email subject,but i m not able to find that column1)Two attachments are getting uploaded for an email , Email as well as the attachment.I just want to save the email part as it is already containing attachment
Inder: When you set the incoming email, you get option to save only email and not attachment. check the incoming email settings on that library.
2)In Mozilla I can see the following popup when i click on the email,I want to have this functionality on internet explorer.
Inder : You can do that
http://office.microsoft.com/en-in/sharepoint-server-help/change-how-to-open-a-document-in-a-library-with-one-click-HA101729873.aspx
Also enable below feature
lick the gear icon to open Settings, and then click Site settings.
Click Site collection features.
Note If the Site collection features option isn't present, you must first click
Go to top level site settings.
Locate the Open Documents in Client Applications by Default feature in the list, and then click
Activate.
3)I want to write content organizer rules depending upon the email subject,but i m not able to find that column
I assume, Email subject should by default become title of that document. Try title
If this helped you resolve your issue, please mark it Answered -
sharepoint document library incoming email without attachment not firing event and not getting email
If email contains attachment it works. Is there any setting in document library that will allow emails and eventhandler to fire with out attachment?
MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint LeadWhat is the purpose of email sent to document library if no attachment. What document library will do what that email if it cant find attachment to save and create a spdoc object. If you want to store email/communication body then opt for site mailbox
app.
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply. -
Apple is great!
Why is iMessage taking my incoming emails and then not making them available for my PC to get? Why can I not send a text msg with photos when iMessage is turned off (but MMS is still on).
I compose an iMessage with the destination as my email address and I attach 2 photos I want on my PC. I send them several times from my iPhone 5C but they never arrive. I look at my ipad later and realize that it's iMessage app is getting ( and swallowing) these emails. I then turn the ipad off. Still can't get the photos through because iphone is now getting them on it's iMessage. I turn off the iMessage feature and try to send photos from text msging. Phone tells me it can't send photos unless iMessage it turned on. What happened to regular MMS text messaging? I go and try to send photos as an email attachment and see that there is no option to attach from the stupid email program. I look up online to learn about the brave new world of apple attachments and send them.
Why is iMessage taking my incoming emails and then not making them available for my PC to get?
The email program on my iphone is not configured to remove messages from the server.
If iMessage is turned off I don't have the issue.
Why can I not send a text msg with photos when iMessage is turned off (but MMS is still on).Did not work. I've selected iMessage to ON and left it. After a few hours I recieved a message "activation unsuccessful. Turn on iMessage to try again". This has been going on for the past 3 days.
-
EmailCC field in sharepoint incoming email settings
Hi,
I have a emailcc field captured in incoming email settings, which is of format :
[email protected] <[email protected]>
Any advise on how do I convert it to [email protected] ?
Please help
Thanks...
sk.RakhishmaOk, I found the answer here :http://www.c-sharpcorner.com/blogs/3973/how-to-extract-a-string-lies-between-two-strings-in-c-sharp-net.aspx
public string Between(string Text, string FirstString, string LastString)
string STR = Text;
string STRFirst = FirstString;
string STRLast = LastString;
string FinalString;
string TempString;
int Pos1 = STR.IndexOf(FirstString) + FirstString.Length;
int Pos2 = STR.IndexOf(LastString);
FinalString = STR.Substring(Pos1, Pos2 - Pos1);
return FinalString;}
sk.Rakhishma -
Issue in incoming email settings in discussion forum
hi,
I have enbaled incoming email settings in my discussion forum list.
i have sent a email with a subject, sent to the targeted-emailid to the discussion forum and its sent successfully.
But the users whom i want to share this discussion thread were not able to receive the email in return when someone posted a reply on this forum.
Pls let me know how to resolve this if its possible OOB. any settings / config changes i need to make it on the exchaneg server or SP Central Admin ?
also how to attach a file / [ attachments ] as a reply to this discussion forum thread.If users want alerts email for some users, you need to set alerts or ask someone to set alerts
You can set alerts in behalf of other users as the administrator for list and inidividual items. Just set up an alert like you are setting it up for yourself...Use the drop-down menu to select "Alert Me", delete your name and enter in someone else's. If
the username textbox is greyed out, you don't have the proper permissions. I think you need to have the "Manage Permission" rights of the site which is included in the Manage Hierachy and Full Control permission levels.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/0dba8b5f-11ec-4717-96df-8bb317db43ff/discussion-board-alert-me-need-only-about-new-threadsnot-messages
you can also try IAlertNotificationHandler interface to customize alert. If you don’t want to write code, you may consider using 3<sup>rd</sup> party tool about SharePoint
alert which you can find on the internet.
For more information, please refer to:
http://support.microsoft.com/kb/948321/en-us
http://blogs.msdn.com/sharepointdeveloperdocs/archive/2007/12/14/how-to-customizing-alert-emails-using-ialertnotificationhandler.aspx
If this helped you resolve your issue, please mark it Answered -
Programmatically set email address column in incoming email settings in discussion fourm
hi,
I have to set up incoming email settings in my discussion forum in my subsite.
but the issue is that i am creating hundreds of sub sites based on a savedsite template.
can anyone help, how to set the incoming email settings' email address columns programmatically, ie, when the sub site is getting created i wanna set this property of my discussion forum list[ my discussion forum is also part of the saved site template].Use Event Handler when a new site is created and set incoming email. Refer to the following post for more information
http://msdn.microsoft.com/en-us/library/microsoft.sharepoint.spwebeventreceiver.webadding(v=office.14).aspx
http://msdn.microsoft.com/en-us/library/microsoft.sharepoint.spwebeventreceiver.webprovisioned(v=office.14).aspx
http://www.novolocus.com/2009/04/15/programmatically-create-and-configure-mail-enabled-lists/
--Cheers -
Unable to set up incoming email settings in Discussion Board
I was not able to set up the incoming email settings in my test discussion board list.
even though my Exchange Server team has done the setup the Exchange related things in my SP 2013 server, I was not able to see any emails flowing into discussion board.
Due to soem reason, Emails not sending to discussion boards.
Am i missing any steps?
I have attched the below screen shot, which shows what i have done in the list settings:
Is anyone has faced this issue before?Hi ,
According to your description, my understanding is that the discussion board cannot receive emails after you set up the incoming email settings in the discussion board list.
Could you find the email in the drop folder?
If not , please make sure you have configured the incoming email settings correctly:
http://blogs.technet.com/b/harmeetw/archive/2012/12/29/sharepoint-2013-configure-incoming-emails-with-exchange-server-2013.aspx
http://daniecsp.blogspot.com/2013/02/sp20132010-how-to-configure-incoming.html
If you can, what is the x-sender’s address in the email which is captured into the drop folder ?
You can refer to the thread:
http://social.technet.microsoft.com/Forums/en-US/152203d4-45ff-4388-9dda-03e4786f63fe/email-enabled-document-library-doesnt-work-when-accept-email-messages-based-on-document-library?forum=sharepointadminprevious
Best Regards,
Eric
Eric Tao
TechNet Community Support -
Incoming email settings on library
Hi!
I have a SharePoint 2013 foundation environment. on this environment i have enabled the incoming email settings and succesfully tested this on a library on the root of my site collection.
When i create a subsite and add a new Document library, i wish to also enable incoming email settings on this library.
the only problem is that, when i go the the incoming email settings from the library, i only have 2 options:
Enable incoming email settings
provide the emailaddress
Where are the other settings gone to ? i really need these settings.
Kind regards.Hi,
According to your description, my understanding is that only two options appeared in the Incoming E-mail settings of a library after applying an event receiver to the library.
Did this issue occur with all the libraries?
I recommend to verify the things below for troubleshooting:
Create a new library and apply the event receiver to it to see if the issue still occurs.
Apply the event receiver to an existing library without issue in the Incoming E-mail settings to narrow the issue scope.
You can also set the Incoming E-mail Settings using PowerShell:
http://thesharepointfarm.com/2013/07/using-powershell-to-manage-sharepoint-email-settings/
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
This email address is not available for use as an Apple ID
hi
i had two apple accounts
and just wanted to change the primary email address for the both with each other
when i changed the first one my old email cant be used with other account then i tried replacing my old email it doesnt replace it says
This email address is not available for use as an Apple ID. You may already have an Apple ID associated with this address. Please try again or sign in using your existing Apple ID.
please help meYes, I am having the same problem. When I called apple they said that things were "tied up somehow" with another account that has a do different birthday than me. Uuuuuhh? So that means someone else can log in?... I have a feeling there is a big vulnerability with the three login options, just like with the current and past password retrieval. Apple had only suggested that I delete my current set up on my serviced and make a new ID and email.
I Just got a new email and made a new Apple ID account For now. I was hoping the email would work itself out. I assumed If I could make sure everything was verified, not associated with another account, and try to get rid of the alternate id and second email option also used to sign in (seen in Apple ID management) that could possibly be construed or mixed up with something else that it would eventually free up and become "available" again. Unfortunately im still waiting In hopes in just needs to recognize the email isn't associated with anything.
I have had a few major concerns with apple products lately especially with security. My iPhone 4s was hacked too. Some ******* was listening/recording and when I hooked to Internet he sent out the recorded portion that was available. Talk about ****** up. -
How to delete old account, I can't log in due to error - This email address is not available for use as an Apple ID. You may already have an Apple ID associated with this address. Please try again or sign in using your existing Apple ID.
All good, I loved with AppStore and now everything seems to be back to normal.
-
I want to change my apple id but get the message "This email address is not available for use as an Apple ID. You may already have an Apple ID associated with this address. Please try again or sign in using your existing Apple ID.". I try to log a call with apple support and I get a message like "cannot schedule a call". That leaves me out of options. Any ideas?
Hi billfromwandering,
I'm sorry to hear you are having these issues changing your Apple ID. It is correct that if an email address has been used previously for an Apple ID, it can not be used for a different Apple ID, as noted in this article:
In most cases, your Apple ID is also the primary email address of your Apple ID account. You can change your Apple ID to any other email address you control, as long as it's not already in use as an Apple ID. If your email address ends with @icloud.com, @me.com, or @mac.com, it's already an Apple ID.
Change your Apple ID - Apple Support
If you are certain that the email in question has never been used for an Apple ID and you are having issues contacting Apple Support regarding this issue, you may want to make sure you are going through the Apple ID support channel on the following page:
Apple ID - Contact - Apple Support
Regards,
- Brenden -
Hi Friends,
We are on EREC standalone model. Initial data transfer between HR to EREC master data using PFAL is done.
All employees have got NA, CP, US, BP in HRP 1001 in EREC system.
Change pointers are also activated in HCM system, now current master data changes are also in reflecting in EREC system thro IDOC posting.
But when recruiter logs into portal and does a candidate search, no internal candidates are appearing ?
1) What needs to be done for internal candidates to visible during candidate search ?
2) Also while logged as internal candidate, released requisitions are not visible for internal candidates while they try to search for internal job postings ?
Kindly provide your inputs.
Regards,
ER.Hi,
In SLG1, getting the below error messages for multiple times.
"Error while calling content extraction class CL_HRRCF_CEC_QUALI_WITH_PROFCY
The error occurred in program CL_HRRCF_SES_BUSOBJ_FROM_SPTYPCM001 line 96
Qualification 52000001 does not exist
The incorrect HR object has the key 01NA60000029 "
"The error occurred in program CL_HRRCF_ALE_EE_INBOUND"
Also please state how to differentiate internal and external candidate search pages.
Regards,
ER.
Maybe you are looking for
-
I am unable to get Lightroom Mobile to work on my home network. The Ipad says "There are no collections to sync, enable lightroom mobile on your computer", but it is enabled. I got it to work one time on another network but not at home where I use L
-
Intel Mini DVD+RW re-burns fail: 4/03/00 Hardware Error, Peripheral device
I can't re-write DVD+RW discs on my Intel Mini. The log says: Backup: Burn sense: 4/03/00 Hardware Error, Peripheral device write fault Backup: Burn error: 0x80020022 The device failed to respond properly, unable to recover or retry. It happends with
-
Hi, Account Last Locked By Date Account Last Unlocked Account Last Unlocked By Reason for Last Account Unlock How to get these values of a user account using UME API. Regards, Surya
-
Hi , I've tried the following block with varrays and working fine DECLARE TYPE tp_test IS VARRAY(100) OF VARCHAR2(50); v_tp_test TP_TEST:=TP_TEST(); BEGIN SELECT ENAME BULK COLLECT INTO v_tp_test FROM EMP WHERE job='CLERK' ; FOR i in
-
SOS:How to solve "internal fatal error:load.cpp line6345"?
hello,everybody. now i meet with a sharp problem in labview. when i try to save a .vi file in labview, sometimes an error information will happen which is "internal fatal error:"load.cpp", line6345". i have tried almost every way to solve this pro