Incoming Email Subject Field length increase

Hi,
In CRM 7.0,I need to increase the incoming email Subject Field length ,When i try to modify UI configuration,Subject fields are not enabled for configuration (Other fields in the same screen are enabled for modifications)..
Please give your inputs whether incoming email Subject Field length can be increased? if so,this should be done at UI level or mail form?
Regards
Shan

Hi Prasenjit,
Thanks for your interaction and response.
Actually I can to find out views and class details in CRM 7.0 by using F2 key..
The UI component is CRMCMP_CCS_EML and view is CRMCMP_CCS_EML/MailBody. The implementation class is ZL_CRMCMP_C_MAILBODY_IMPL. Since all the page attributes are string, There is a context class ZCL_CRMCMP_C_MAILBODY_CTXT, But no context node (Like you mentioned type CN as in *CN00, *CN01) within page attribute.
The main issue am facing here is that couldnu2019t figure out where to start the debugging for inbound mails where the subject field is truncated. I usually process inbound mails from SOIN transaction.
Moreover subject field can have more than 40 characters in outgoing mail, but the inbound mail subject field limited to 40 character and rest of them truncated.
Hope you understand my area of concern and provide me your input.
Regards,
Shan

Similar Messages

I have an email account on qou but all the incoming emails subject and body appear as question marks, why???

I have an email account on QOU (al-quds Open University) but all the incoming emails subject and body appear as question marks, why???

Try to set the Boolean pref gfx.font_rendering.directwrite.use_gdi_table_loading to false on the about:config page.
*http://kb.mozillazine.org/about:config
Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
Try to disable hardware acceleration.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"

Strange characters in email Subject field

I don't quite know where to post this one, but since I'm always programming only .jsps and servlets I hope someone will answer this here.
Accented characters in subject field of our emails produced by our programmes are being replaced by nonsense like the following:
=?ANSI_X3.4-1968?Q?
In the body of the email I can just replace accented characters with html equivalents, no problem, but not in the subject field.
Is there a way round this, like setting the character encoding somewhere or whatever? I use the javamail API to produce these emails - is there anything in the API for this?
Any help would be much appreciated.

I think e-mail only allows only ASCII characters in certain fields? I think you'd have to read the email RFC to find out the details of that.
http://www.faqs.org/rfcs/rfc2822.html
That's a start, but there are certain extensions to that, I think, that might atler things... Otherwise, you'd have to check thru the JavaMail API docs and see if there's an encoding setting somewhere.

Email subject field - How to insert

Mac OS 10.4.0.11 - GLive CS1 (7.0.2)
Creating an email link in GoLive is easy enough, the email program jumps into life as you click the link with the correct address shown, but I cannot find how to automatically inset some text in the subject field on the email. See attachment.

1. Nov 27, 2006 5:13 PM in response to: srelberger
Re: E-mail Link with Subject Field
mailto:[email protected]?subject=You owe me a beer for Googling this for you.
Just saw this which seems to answer my question

ANSI X12 EDI 850 V4010 - REF Field length Increase

Hi,
The standarad EDI V4010 definiation contains Segment:REF, Field:127, MaxLength:30 (ISA.GS.ST.REF:127), partner sending a EDI data with more than 30 characters for this field. As per their EDI guide lines the MaxLength allows upto 50 chars for this field.
Have changed the field length from 30 to 50 chars in ANSI X12 850 V4010 message structure and re-generated EDI To XML mapping.When test the mapping in BIC tool, the EDI file is getting converted to EDI XML when the field value is more than 30 chars i.e upto 50 chars. Also Tested by giving more than 50 chars value for this field and it's failed to convert in BIC mapping tool saying 'The length of the field value is too big'.
As the change working in BIC tool, generated sda file and deployed on PI QA system. While test the change after .sda file deployment the change of Field Length is not reflecting and it's only allowing upto 30 chars only., and more than 30 chars data for this field EDI files are failing.
As the change working alone in BIC tool fine and not reflecting thefield length after sds file deployment. Any ideas about this issue and how to handle this requirement.
Thanks
Veera

Hi John,
If you see the documentation what you have given :
Parameters:
on: delimiters at the end do not appear
off: delimiters at the end appear
it clearly says the parameter is used for the delimiters, but not for truncating length of the fields in Seeburger.
I'm not sure if you've ever used the BIC Mapping tool and what I'm really looking for is someone with experience in this area to give a solution that works for this question:
By the way I have used the seeburger and this requirement we have done within XI because we have done all the rules within XI not in seeburger. But I will give a try with this requirement and will try to update you. Until unless I work with any of the issue I will not suggest. Even If I didnt I will try and then will suggest. Dont get me wrong.
Cheers,
John.

Quarantine Sender/Subject field length

We just switched from Postini to Ironport and this came from one of my users. I've looked but couldn't find a configuration for this.
"Is it possible to adjust the display settings so that more of the sender & subject info appears in the fields. There are only 16 characters of the blocked email address (plus ...) and 23 characters of the subject (plus ... ). "
-Thanks

To clarify, you're asking about the gui when logged into the spam quarantine, correct?
I don't know of any config for that... but a beta cycle is coming... I'll poke development about it, because its dumb that you can't resize the columns, at the very least...

I can not open my email even though I get a list of incoming email subject list.

I signed up for thunderbird. Now I get email for "[email protected]" but I can not open the email
I have email that I have opened but can not connect to the highlighted link.

Re configure the account settings and try again

Last opened email subject is shown when opening email with many destination addresses

Platform IPAD2 64Gb, OS version 4.3.5 (8L1), English default language.
Issue: email subject field contents not showing correctly.
Today I received on my gmail account an email that was targeted explicitely to a group of over 60 addresses, all of them together in the "to:" field.
on the left part of the screen I can properly see a part of the right subject of the email.
If I access another email, then open that one, the wrong subject of the last opened email is shown in the right part of the screen, just under the long recipient list, and before the correctly shown date time and content.
This happens consistently, and whatever other email I decide to open, its subject is shown in place of the right one.
While having that email opened, if I kill the email application (doubleclicking home and then killing the mail icon), and then relaunch email, the email opens immediately, and the subject is correctly shown.
I also had cases in which an attachment was not shown in the email, despite being there, and being visible as a clip icon on the left part of the screen (but this is a different issue).
Marco Guardigli ( @mgua )

Unfortunately there isn't official commercial support for Mozilla Thunderbird from Mozilla Corp.. I believe some contributors here ([http://mozilla.magicfab.ca myself included]) do offer such support, though.
''Before doing anything else, please do exit Thunderbird completely and [https://support.mozilla.org/en-US/kb/profiles-tb#w_backing-up-a-profile backup the profile folder] - it contains all your email, settings, filters, etc.''
Regarding your issue, it looks like the mail folder information may be corrupt. In the left pane, in the folder list, right-click on the Sent folder and select '''Properties'''. Choose "'''Rebuild Index'''" or "'''Repair Folder'''" - do you even have that option? Once done, exit TB completely and restart it.
Updating to a newer version will help anyone help you, if only because some of the documentation for older Thunderbird versions is a bit harder to find and testing to try & reproduce your problem will be harder. Don't do this just yet, though :)
After this issue has been addressed I would suggest considering using IMAP if your provider allows you to, and of course archiving your email to Local Folders and doing regular backups of your profile.
If you want to arrange commercial support, contact me via the link I provided above and we can discuss rapidly. Otherwise I am fine continuing here, however I can only reply as time permits. I am in Montreal (so, EST time zone).

Sieve Vacation replies default email subject

I got Avelsieve up and running on my 10.5.6 server. I set a vacation message and the subject of the email people emailing me get is "Auto: incoming email subject". I would like to be able to change the "Auto:" to "Out of Office AutoReply:".
Can anyone tell me where I do that?
Thanks in advance
Joe

As far as I know avelsieve does not support this. You will either have to modify avelsieve itself or edit the generated sieve scripts manually.
If you look at the generated rules, you should see something like:
vacation :days 1 text: your reply text
Change it to:
vacation :days 1 subject: your subject of choice text: your reply text
When done, you need to compile the script with sievec:
/usr/bin/cyrus/bin/sievec yourscriptfile defaultbc
Note: If you start creating scripts manually, it is best to create new ones rather then modifying the scripts generated by avelsieve. avelsieve could get out of sync
HTH,
Alex

EmailCC field in sharepoint incoming email settings

Hi,
I have a emailcc field captured in incoming email settings, which is of format :
[email protected] <[email protected]>
Any advise on how do I convert it to [email protected] ?
Please help
Thanks...
sk.Rakhishma

Ok, I found the answer here :http://www.c-sharpcorner.com/blogs/3973/how-to-extract-a-string-lies-between-two-strings-in-c-sharp-net.aspx
public string Between(string Text, string FirstString, string LastString)
 string STR = Text;
 string STRFirst = FirstString;
 string STRLast = LastString;
 string FinalString;
 string TempString;
 int Pos1 = STR.IndexOf(FirstString) + FirstString.Length;
 int Pos2 = STR.IndexOf(LastString);
 FinalString = STR.Substring(Pos1, Pos2 - Pos1);
 return FinalString;}
sk.Rakhishma

IMAP Email Portlet Error accessing email with blank subject field

I have sucessfully deployed imap portlet and added it to a page. I am able to read and compose emails. However while testing the portlet I ran into few problems:
1. Cannot read an email from inbox if the subject field of email is blank. Only way to read this email is to first select an email that has a subject and then navigate through "next" or "previous" button to read this email.
2. Some of the emails does not show the attachments. Some of them dooes show it. I am unable to figure why is it doing so.
3. It takes too long to load and sometimes ends up in "portlet time out".
Has anyone else also ran into such problems. Is there a solution to these problems.
Thanks
Abhishek Periwal

Thanks for early reply.
I analayzed my emails and figured out that email that are forwarded to me with some attachments have problems. These emails do not include the actual attachments , they only include the text part written by the sender. It will be great if this bug gets fixed.
Secondly I increased the time out and it helped. Thanks for your suggestion.
Thanks
Abhishek

How to increase the DFF fields length

Hi Gurus,
its very urgent requirement ,how to increase the dff field length in standard page i.e self-service appraisal page,please help me
Regards,
Sreeni

Hi Ayaz/Sreese,
As per my requirement user enable the DFF Fields in perticuler pages in sshr module like PMS So ...i create the attribute columns and viewinstance through personlization create the column and i give the hight and lenght in column cration time i create the id like "XXApr" same id name i gave in DFF Field Names.....so i did like ....this is my approch.....
---u have any doubts fell free to post the mail..i fwd through screen shots then only u undershood ,([email protected])
Regards,
Srinivas

How to set a form field that automatically saves as email subject title

I am creating a form in acrobat 9 and want the submit to email button to automatically use the information from one of the text fields as the subject title of the email. So when the client submits the form at the end the PO number they have used will automatically be the email subject. Is there any way to do this? I have found an example created using javascript but I am very much a novice with this so I don't know where to start with this? Any help would be greatly appreciated

Read this tutorial:
http://acrobatusers.com/tutorials/dynamically-setting-submit-e-mail-address

How do I change the subject line on incoming email

On my old PC I could easily start typing in the subject line of a received email. This would allow me to search for a name later on when looking for an invoice. I dont know how to change the subject line of an incoming email to my imac?

This site tells you how to edit the subject of a message. I just tested using OS X 10.8.5 and it worked, without altering the time & date stamp, or the original sender info.
http://email.about.com/od/macosxmailtips/qt/et_edit_receive.htm
Steps copied below:
Drag and drop the desired message out of Mac OS X Mail onto the Desktop.
Ctrl-click on the message copy on the Desktop.
Select Open With | TextEdit from the menu.
Make the desired changes to the message source.To change a message's subject, look for "Subject:" at the beginning of a line starting from the top. (hint, you can use 'Command-F' to bring up a search window to help you find the "Subject").
Close TextEdit saving the document.
Ctrl-click on the message on the Desktop again.
Select Open With | Mail from the menu this time.
Now select Message | Copy To followed by the message's original folder from the menu in Mac OS X Mail.
Close the message window.
Delete the message copy from your Desktop.
Optionally, delete the original message in Mac OS X Mail. (when I tested this, the original message was no longer there. Not sure what happened to it, but the changes worked without editing the time, date, or original sender information.)

PDF forms - Change email subject to field content

Hi,
I created a fillable form with a sumbition via email button. When submitting, I need to replace the default email subject "Form Returned: fileName" with the content of a particular field.
I have no idea where to start. Can you help? THanks, Jp

wow! that was quick!I'll give it a try, thank you!

Incoming Email Subject Field length increase

Similar Messages

Maybe you are looking for