Incoming idocs giving error for Serialization
Hi Friends
Am getting inbound idocs with this error : Serialization errror for object 01,S, 34343434,Expected counter 000001<
and error in details says,
The expected serialization counter has the value 000001. However, the serialization counter in the IDoc has the value 000002 and is therefore too big. There are therefore older IDocs with this HR object with the serialization counter values in between. These IDocs have either not yet been posted, or have been posted incorrectly.
what shd i do for this few exper said i need to do some thing for Serialization so automatically system shd take care for this,
Pls help me on this.
Regards
Meeta
Hello,
Refer to the SAP Note [65954|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=65954]. It might be of use for you.
Thanks and Regards,
Venkat Phani Prasad Konduri
Similar Messages
-
Item Open Interface giving error for Org Assignment
We ran the MTL_SYSTEMS_ITEMS_INTERFACE & loaded all the items at master level.
We are having issues in setting at Org level. Cant figure out what the issue as only few records gets assigned & then garbage sets in for remaining records. An SR has been raised & the tech support representative was saying that UOM's are different at master & org levels. Never heard of this issue earlier. I have worked with UOM's different at Master/Org levels.
The UOM's are different at Master & Org Level and in some cases the UOM are different for different Orgs. Attribute Control for Primary/Sec UOM is at Org level. The UOM's belong to the same UOM Class. There are standard conversions defined for all these UOMs.
Any pointers for quick resolution ?Pl do not post duplicates - Item Open Interface giving error for Org Assignment
-
IW32- order-print is giving error for particular User.
Dear Friends,
IW32- order-print is giving error for particular User and output type. Debugging authorization restricted on the system, hence I canu2019t trace out the problem. If anybody comes across such issues, please reply to the post.
Thanks In Advance for your reply.
Anil Dasari
Thanks In Advance.Hi,
Information about dump:
1. User and Transaction:
Runtime Errors MESSAGE_TYPE_X
Date and Time 06.05.2011 10:47:40
MM Used. 13116304
MM Free. 3639760
User and Transaction
Client.............. 700
User................ "BLADEF01"
Language key........ "N"
Transaction......... "IW32 "
Transactions ID..... "4DC387ECA12B684DE10000001A5B1803"
Program............. "/MRSS/SAPLRSG_PM_ORDER"
Screen.............. "SAPLCOIH 3000"
Screen line......... 33
Information on where terminated
Termination occurred in the ABAP program "/MRSS/SAPLRSG_PM_ORDER" - in
"/MRSS/RSG_MAINTAIN_MRS".
The main program was "SAPLCOIH ".
In the source code you have the termination point in line 441
of the (Include) program "/MRSS/LRSG_PM_ORDERU04".
2. Info. Where it got terminated.
Information on where terminated
Termination occurred in the ABAP program "/MRSS/SAPLRSG_PM_ORDER" - in
"/MRSS/RSG_MAINTAIN_MRS".
The main program was "SAPLCOIH ".
In the source code you have the termination point in line 441
of the (Include) program "/MRSS/LRSG_PM_ORDERU04".
3. How to correct the error.
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"/MRSS/SAPLRSG_PM_ORDER" or "/MRSS/LRSG_PM_ORDERU04"
"/MRSS/RSG_MAINTAIN_MRS"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1.1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2.2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3.3. If the problem occurs in a problem of your own or a modified SAP.
I have been searching for notes recently implemented for IW32.
Thanks and Regards,
ANIL DASARI -
MySite – My Content Page is not working and giving error for existing customers
We are using SharePoint 2010 and recently moved to SharePoint 2013. Central Admin run under SP 2013 and Content Db Front End run under SP 2010.
After migration the MySite – My Content Page is not working and giving error for existing customers (http://mysite.ss.com/_layouts/MySite.aspx?Error=4705).
New users (after migration) are able access the My Content and adding documents but old users can’t.
Can anyone help me on the above?I think you might be using non claims web app in 2010, if that is the case, you 'd need to convert your existing users to claims users for which you can refer to http://technet.microsoft.com/en-us/library/gg251985(v=office.15).aspx
to check if your exisiting users are claims or classic users , try
get-spuser -web http://mysite.ss.com -limit all
check in the output if you see the claims GUID in form of user names like i:0#.w|domain\username, if yes, they claims users if you just see Domain\username, you want those users to be converted to calims.
i'd need more details to be specific about my answer but aforementioned scenario is most common of all, hope this helps,
Thanks, Noddy -
INVOIC01 IDOC giveing error.
Hi
I am trying to process INVOIC01 IDOC using standard SAP function module IDOC_INPUT_INVOIC_MRM. Always its giving error at a particular poing as given below.
IF f_subrc = 0 AND NOT i_rbkpv-zterm IS INITIAL
AND i_fix_payment_terms IS INITIAL
AND ( NOT i_rbkpv-zbd1t IS INITIAL
OR NOT i_rbkpv-zbd1p IS INITIAL
OR NOT i_rbkpv-zbd2t IS INITIAL
OR NOT i_rbkpv-zbd2p IS INITIAL
OR NOT i_rbkpv-zbd3t IS INITIAL ).
f_subrc = 4.
f_fieldname = 'RBKPV-ZBD1T'.
ENDIF.
The values are i_rbkpv-zterm = A500 , i_rbkpv-zbd1t = 30 and all other variables in the condition are initial. This 'IF' condition always fails.
Anybody have any idea why this happens ? Any solutions/ work arounds / suggestions ? Please.
Can anybody tell me what is this i_fix_payment_terms ?
ofcource..points will be rewarded for helping answers...
Regards,
KrishnakumarCheck the sy-subrc value before the IF statement in debug.
It should always 0 and i_fix_payment_terms (Internal table ) will not contain any value.
Hope it will fill after that.... -
OdiSqlUnload giving error for network location specified
Hi,
I have been trying to use OdiSqlUnload tool to create text files on Network machine.
But it is giving following error
oracle.odi.oditools.OdiToolInvalidParameterException: Error while setting parameters on tool
at com.sunopsis.dwg.function.SnpsFunctionBase.getCoreOdiTool(SnpsFunctionBase.java:607)
So as per error it is saying parameters specified are incorrect.
Let me also paste for you Code i have used.
OdiSqlUnload -FILE= \\10.161.102.182\Interfaces\OMP\BUR\snd\RBSIT_#SAP_Filename.txt -DRIVER=<%=odiRef.getInfo("SRC_JAVA_DRIVER")%> "-URL=<%=odiRef.getInfo("SRC_JAVA_URL")%>" "-USER=<%=odiRef.getInfo("SRC_USER_NAME")%>" "-PASS=<%=odiRef.getInfo("SRC_ENCODED_PASS")%>" "-FILE_FORMAT=FIXED" "-ROW_SEP=\r\n" "-DATE_FORMAT=yyyy/MM/dd HH:mm:ss" "-CHARSET_ENCODING=ISO8859_1" "-XML_CHARSET_ENCODING=ISO-8859-1"
SELECT * FROM ompodi.start_record
As here i have specified network location, does it mean i cannot create files on ntwork machine directly?
If so then is there any way to move files to network machine location from host computer?
Also i would like to know any tool for deleting files , preferably network location.
Thanks and Regards,
MaheshIT WAS GIVING ERROR BECAUSE IN SOURCE COMMAND I HAVENT SPECIFIED SOURCE TECNHOLOGY AND LOGICAL SCHEMA.
ALSO IN ABOVE COMMAND THERE IS NO NEED TO WRITE QUERY WORD EXPLICITELY.
SO IT SHOULD BE AS
OdiSqlUnload -FILE=D:\Patrol\kaname2alert.txt -DRIVER=<%=odiRef.getInfo("SRC_JAVA_DRIVER")%> "-URL=<%=odiRef.getInfo("SRC_JAVA_URL")%>" "-USER=<%=odiRef.getInfo("SRC_USER_NAME")%>" "-PASS=<%=odiRef.getInfo("SRC_ENCODED_PASS")%>" "-FILE_FORMAT=FIXED" "-ROW_SEP=\r\n" "-DATE_FORMAT=yyyy/MM/dd HH:mm:ss" "-CHARSET_ENCODING=ISO8859_1" "-XML_CHARSET_ENCODING=ISO-8859-1"
select 'FAILURE ',trim(nvl(substr(substr( PACKAGE_NAME||',', 1, instr(PACKAGE_NAME,',')-1 ),7),'Error Due to missing scenario or Any other unlogged error')) Package_Name,to_char(FAILURE_TIMESTAMP,'DD-mm-yyyy HH24:MI:SS') Execution_Time from <%=odiRef.getSchemaName("OMP","W")%>.ERROR_MESSAGES order by failure_timestamp desc
HOPE IT WOULD HELP SOMEONE.
SO POSTING IT. -
Top N query giving error for oracle 8.0.6
Dear All,
We are executing this query SELECT XBLNR, WERKS, MATNR, MDV01, BACKFLQUANT, STATUS, SAPTIMESTAMP, PITSTIMESTAMP, PMTIMESTAMP, BATCH FROM (SELECT XBLNR, WERKS, MATNR, MDV01, BACKFLQUANT, STATUS, SAPTIMESTAMP, PITSTIMESTAMP, PMTIMESTAMP, BATCH FROM PMBPITS.PITS_UNITY WHERE STATUS = '01' ORDER BY PMTIMESTAMP) WHERE ROWNUM < 20
on oracle 8.0.6 but this is giving the following error
ora - 00907 missing right parenthesis error
1. Is it that in the inner select we cannot use order by and where clause together.
2. We also found that if we remove order by from inner select then the query is not giving error
pls help . points will be awardedHi,
what ever the Aman said is correct. You check this is supported in 8.1.5, SQL allows you to embed the ORDER BY clause in a subquery and place the ROWNUM condition in the top-level query;
'Top-N query' is a ORACLE 8i feature which is supported in SQL. However,
Bug:855720 states the following:
"PL/SQL does not support top-N queries (ORDER BY in SUBSELECT/SUBQUERY
or VIEW. Since this feature is available in SQL, but not in PL/SQL,
it has been logged as a Bug that will be fixed in 8.1.6."
- Pavan Kumar N -
XdbConfiguration.sql giving errors for package XDB_CONFIGURATION
Hi,
I am getting following errors(at the bottom) while running xdbConfiguration.sql before installing the demo.
I am logged in as sys user(sysdba) and using running
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
on Windows2000.
Is the wrong version of Oracle. Do I have have 9.2.4.0.
Thanks in advance for help.
Om Soni
Errors for PACKAGE BODY XDB_CONFIGURATION:
LINE/COL ERROR
51/6 PL/SQL: Statement ignored
51/54 PLS-00302: component 'DELETE_FORCE' must be declared
56/4 PL/SQL: SQL Statement ignored
56/20 PL/SQL: ORA-22970: name does not correspond to an object viewHi ,
I upgraded to 9.2.0.4.0. The error still shows up while running the xdbConfiguration.sql.
The following errors show up:
Errors for PACKAGE BODY XDB_CONFIGURATION:
LINE/COL ERROR
51/6 PL/SQL: Statement ignored
51/54 PLS-00302: component 'DELETE_FORCE' must be declared
56/4 PL/SQL: SQL Statement ignored
58/9 PL/SQL: ORA-00942: table or view does not exist
I got rid of first two error by removing dbms_xdb.DELETE_FORCE from line
dbms_xdb.deleteResource(targetResource,dbms_xdb.DELETE_FORCE);
Last two error are at line :
select make_ref(DATABASE_SUMMARY,'DATABASE_SUMMARY')
into xmlref
from DATABASE_SUMMARY;
Looking at the script DATABASE_SUMMARY is not a object.
May be the script has a bug in it.
-Om -
IDOMServices Parse giving error for non-alpha numeric characters in content
Hi All,
Using Adobe InDesign CS4 SDK 557, I want to create IIDXMLDOMDocument * from a xml stored in a PMString variable.
I used the following code to parse the xml:-
InterfacePtr<IK2ServiceRegistry> servReg(GetExecutionContextSession(), UseDefaultIID());
InterfacePtr<IK2ServiceProvider> provider(servReg->QueryServiceProviderByClassID (kDOMParserService, kDOMParserServiceBoss ));
InterfacePtr<IDOMServices> domService( provider, UseDefaultIID() );
if(!domService)
break;
std::string stdString = myXMLString.GetPlatformString();
const char * buff = stdString.c_str();
InterfacePtr<IPMStream> pmStream(StreamUtil:: CreatePointerStreamRead( (char *)buff, stdString.size()));
IIDXMLDOMDocument * parsedDom = domService->Parse( pmStream );
- Now the problem is when myXMLString have some special character like “0x27” , “0x14” etc. then IDOMServices::Parse fails.
- I tried replacing these characters with “'”, “” but still IDOMServices::Parse fails.
I also tried to used ISAXServices::ParseStream, but it also gives error for the same character.
Also tried setting ISAXParserOptions::SetAbortAfterWarning(kFalse), but not changed in result.
Please let me know if I am missing something.
Thanks,
Jitendra Kumar SinghHi Nitika Saini,
Please let me know what's your patch level of BI 7 system.
I am also facing problem with transformations, I didn't see any transper routines in my system for 0IC_C03 - 2LIS_03_BX, LIS_03_BF, 2LIS_03_UM.
Here, my BI 7 patch level BI content 8 and BW pathc 16.
Thanks,
Chandra -
Giving error for NearCache Configuration-java.lang.IllegalArgumentException
Hi,
I tried to use near cache topology but it is giving the below error(I am unable to masp the near cache)
java.lang.IllegalArgumentException: Unresolved reference to scheme:
example-local
at com.tangosol.net.DefaultConfigurableCacheFactory.resolveScheme(DefaultConfigurableCacheFactory.java:840)
at com.tangosol.net.DefaultConfigurableCacheFactory.resolveScheme(DefaultConfigurableCacheFactory.java:893)
at com.tangosol.net.DefaultConfigurableCacheFactory.configureCache(DefaultConfigurableCacheFactory.java:130
6)
at com.tangosol.net.DefaultConfigurableCacheFactory.ensureCache(DefaultConfigurableCacheFactory.java:294)
at com.tangosol.net.CacheFactory.getCache(CacheFactory.java:204)
at com.tangosol.coherence.component.application.console.Coherence.doCache(Coherence.CDB:18)
at com.tangosol.coherence.component.application.console.Coherence.processCommand(Coherence.CDB:209)
at com.tangosol.coherence.component.application.console.Coherence.run(Coherence.CDB:37)
at com.tangosol.coherence.component.application.console.Coherence.main(Coherence.CDB:3)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.tangosol.net.CacheFactory.main(CacheFactory.java:827)
I given the below configuration in the cache server side....
<caching-scheme-mapping>
<cache-mapping>
<cache-name>NearCache</cache-name>
<scheme-name>example-near</scheme-name>
</cache-mapping>
</caching-scheme-mapping>
<caching-schemes>
<near-scheme>
<scheme-name>example-near</scheme-name>
<front-scheme>
<local-scheme>
<scheme-ref>example-local</scheme-ref>
</local-scheme>
</front-scheme>
<back-scheme>
<remote-cache-scheme>
<scheme-ref>example-remote</scheme-ref>
</remote-cache-scheme>
</back-scheme>
</near-scheme>
<remote-cache-scheme>
<scheme-name>example-remote</scheme-name>
<service-name>ExtendTcpCacheService</service-name>
<initiator-config>
<tcp-initiator>
<remote-addresses>
<socket-address>
<address>localhost</address>
<port>9099</port>
</socket-address>
</remote-addresses>
</tcp-initiator>
<outgoing-message-handler>
<request-timeout>30s</request-timeout>
</outgoing-message-handler>
</initiator-config>
</remote-cache-scheme>
</caching-schemes>
PLease provide the configurastion for the nearcache topology....
Thank you.You are missing the example-local
<local-scheme>
<scheme-ref>example-local</scheme-ref>
</local-scheme>
for example,
<local-scheme>
<scheme-name>example-local</scheme-name>
<eviction-policy>HYBRID</eviction-policy>
<high-units>{back-size-limit 0}</high-units>
<unit-calculator>BINARY</unit-calculator>
<expiry-delay>{back-expiry 1h}</expiry-delay>
</local-scheme>Examples can be found in the coherence.jar that contains coherence-cache-config.xml -
BD87 idoc inbound error for message type HRMD_A
Hello there,
I am getting below error while fetching Inbound idoc in tcode BD87, see log below from ST22
Short text
An SQL error occurred when executing Native SQL.
What happened?
The error "-10328" occurred in the current database connection "LCA".
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
How to correct the error
Database error text........: "Mismatch of number of stream members for
parameter (3) (application 6, database 9)."
Database error code........: "-10328"
Triggering SQL statement...: "EXECUTE PROCEDURE "SIM_SIMSESSION_CONTROL""
Internal call code.........: "[DBDS/NEW DSQL]"
Please check the entries in the system log (Transaction SM21).
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_DSQL2_SQL_ERROR" "CX_SY_NATIVE_SQL_ERROR"
"/SAPAPO/SAPLOM_CORE" or "/SAPAPO/LOM_COREU07"
"SIMSCTRL_EXEC_COM"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"SIMSCTRL_EXEC_COM" "(FORM)", or its possible occurrence must be declared in
the
Do we need SAP_APO in order to install LiveCache?
We have below landsacpe
- SAP ECC 6 EHP4 with SQL server 2005 S BACKEND
-LCAPPS Component release 2005_700 with SP
SAPKIBHD05.
- We dont have SAP_APO component
-SAP LiveCache system have MAXDB 7.7.04.29 as backend.
- Live cache client is installed on same SAP ECC system where we have SAP ECC EHP4 system.
any suggestion how to resolve it?
Mani>
Mani wrote:
> I installed a standalone server and i need it only for SAP HR (specifically Idoc processing in SAP HR Human capital management module). But i am getting error while running ibound idoc process.
> So Do i still need SAP_APO component?
I never heard of this specific scenario for liveCache usage in the past 7 years working in SAP support on the liveCache component.
Might be useful if you provide some more details (documentation, notes, links) that describe this usage scenario.
In any case you will need to have a liveCache version that is compatible to your application ABAP coding.
The error message you posted indicates that your liveCache version does not fit your application version (or vice versa).
> I installed SAP MAxDB and LiveCache buid using Installation master DVD for SAP ERP. So i think i followed the right method as specified in installation guide.
Be precise, please. Which installation guide? There are hundreds of them - not THE installation guide.
> Secondly can you help me something specific to my problem in coding form?
Already did.
> i tried in LC10, using LCA monitoring i am not able to run SQLDBC trace under
> LCA >> LiveCache Monitoring >> Tools
> but i am not able to execute the same, is it a error or we need to configure something?
Well, the liveCache needs to be integrated into the LC10. You'd do this in transaction SM59 - but as you've followed an installation guide, this would have been covered in it...
> Operational status is active green light, below is file status.
>
>
KNLMSG KnlMsg 1.098.697 28.01.2011 06:59:55 Database Messages ASCII
> KNLMSGARC KnlMsgArchive 8.192 28.01.2011 06:59:50 Database Errors ASCII
> KNLMSGOLD KnlMsg.old 342.663 28.01.2011 06:59:50 Database Messages (OLD) ASCII
> KNLTRC knltrace 6.209.536 28.01.2011 06:59:56 Database Trace (Raw/Binary) BINARY
> BACKHIST dbm.knl 570 10.01.2011 06:18:41 Backup History ASCII
> DBMPRT dbm.prt 133.843 29.01.2011 11:41:27 Database Manager Log File ASCII
> DBMPAHI L00.pah 214.225 10.01.2011 06:18:16 Database Parameter History ASCII
> LCINIT lcinit.log 15.299 28.01.2011 07:00:00 LiveCache Initialisation ASCII
> LCINITCMD lcinit.bat 3.047 28.10.2008 14:45:51 LiveCache Initialisation Script ASCII
> LCINITHIS lcinit.his 46.742 28.01.2011 07:00:00 LiveCache Initialisation History ASCII
> INSTPRT dbm.ins 863.981 10.01.2011 06:18:47 Installation Log File ASCII
> DIAGDIR File 0 10.01.2011 06:18:18 Diagnose History DIRECTORY
> ANALYZER analyzer 0 29.01.2011 00:00:36 DB Analyzer File DIRECTORY
> LCTRC#init.his lcinit.his 46.742 28.01.2011 07:00:00 LiveCache Trace (ASCII) ASCII
> LCTRC#init.log lcinit.log 15.299 28.01.2011 07:00:00 LiveCache Trace (ASCII) ASCII
> LCTRC#_apo_version.txt lc_apo_version.txt 164 28.01.2011 07:00:00 LiveCache Trace (ASCII) ASCII
>
> any clue whats wrong?
> Mani
The only thing this tells us is: the liveCache instance itself apparently comes up and writes out the standard log files.
That's it.
As I already tried to explain, the problem seems to be the dependence between your application and the liveCache version.
Usually I'd recommend to open a support message for this, but the colleagues would (hopefully) ask the same questions as I did.
regards,
Lars -
ALE/IDOC TRANSPORT ERROR FOR Z TABLE
Dear Experts,
I am new to ALE/IDOC,I am trying a simple scenario by transporting a ztable data between two clients with in a same server.
steps i have done are :
1, created logical system at both sender and receiver.
2, assigned logical system to clients at both side.
3, created segments for fields at Z table and created new message type.
4, created RFC destination and port at both ends.
5, created distribution model at sender.
6, When i generated partner profile at sender i got the below error
"Port could not be created
RFC destination LOGSTM_210 not specified for system LOGSTM_210
Enter the RFC destination and restart the generation"
can any one please help me to solve this error?
Thanks In Advance,
Sujay.Hello Sujay,
Have you added the message type SYNCH to the sender Partner Profile(WE20)?
If not, then you have to manually add this message type to the Partner Profile & give the relevant port details. SYNCH is reqd. for RFC (read port) determination. This is reqd. before the generation of partner profile !!
Hope i am clear.
BR,
Suhas -
Listner is giving error for Oracle9i on windows Media centre Edition
I have Installed Oracle9i Server on Windows XP-Media Centre Edition.
Listner is not coming up.It is giving following error,Please help me
TNSLSNR for 32-bit Windows: Version 9.2.0.1.0 - Production on 01-JUL-2006 07:33:56
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
System parameter file is C:\oracle\ora92\network\admin\listener.ora
Log messages written to C:\oracle\ora92\network\log\listener.log
Trace information written to C:\oracle\ora92\network\trace\listener.trc
Trace level is currently 0
Started with pid=2400
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC0ipc)))
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=127.0.0.1)(PORT=1521)))
TNS-12532: TNS:invalid argument
TNS-12560: TNS:protocol adapter error
TNS-00502: Invalid argument
32-bit Windows Error: 22: Invalid argument
Thanks
udayHi,
Is there any reason you have pipenames in your listener.ora? Make a backup of your original file, then try to remove extra entries by making it simpler. After each change, attempt to start the listener. Also, it may prove helpful to post your listener.ora.
Regards,
catalin. -
Exe giving error for report generation and LV 8.6.1
I have created and installed a labview application in a PC(windows XP) where labview is not installed. (already included NI_Excel.lvclass)
I have used a report(excel) generation to display the results.
I am getting following error:
Error Code: -2147352573
Member not found in NI_Excel.lvclass:
I am using MS office Excel 2007 SP1
NI LabVIEW Run-Time Engine:8.6.1.
Report generation toolkit version:1.1.3
phani srikanth
Solved!
Go to Solution.
Attachments:
Error.JPG 10 KBsearch the ni website and a 30 day eval copy can be found. For use beyond this period you would have to buy a license (unless you have one of course)
compatibility can be found on the following link
http://digital.ni.com/public.nsf/allkb/C9408B9F08D711E786256F3300701D01
hope it helps
TD
Please remember to accept any solutions and give kudos, Thanks
LV 8.6.1, LV2010,LV2011SP1, FPGA, Win7 -
Weblogic deployment APIs giving error for deployment on weblogic 10.3.2
I am using weblogic deployment APIs to distribute my war file on weblogic 10.3.2 but it gives the following error on distribute
weblogic.management.ManagementException: [Deployer:149003]Unable to access application source information in '<!DOCTYPE HTML PUBLIC "-/W3C/DTD HTML 4.0 Draft/EN">/app/jamagent.war' for application 'jamagent.war'. The specific error is: No application files exist.
My sample code is below.
DeploymentOptions options = null;
Target[] targets = myConnectedManager.getTargets();
Class wlsFactoryClass = Class.forName("weblogic.deploy.api.tools.SessionHelper");
Method m = wlsFactoryClass.getDeclaredMethod("getDeploymentManager",new Class[]{String.class,String.class,String.class,String.class});
m.setAccessible(true);
WebLogicDeploymentManager myConnectedManager = (WebLogicDeploymentManager)m.invoke(wlsFactoryClass, new Object[]{hostname,port,weblogicUsername,weblogicPasswd});
myConnectedManager.enableFileUploads();
options = new DeploymentOptions();
options.setName(destWarName);
ProgressObject po = myConnectedManager.distribute(targets, new File("/tmp/jamagent_orig.war), null,options);
The header of web.xml is
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">
Can someone help why this is happening? I am not including weblogic-application.xml in the war file as i think this is not required for a war file. Is that the reason?
Edited by: user790199 on Dec 28, 2009 7:37 AMHi,
The DTD used in "web.xml" should not cause any issue ...though it's the OLD "web.xml"...Please try to run the Following command to Generate the New Deployment Descriptors from the Existing Application:
Step1). Open a Command Window and Run "setWLSEnv.sh" or "setWLSEnv.cmd".
Step2). In the Command Prompt move to the Current Directory where you have placed your Application and then Run the Following Command
java weblogic.DDConverter -d NewDDs jamagent.war
Here Above Command Will read the "jamagent.war" War archive and then It will generate the New DDs in "NewDDs" directory...Which we need to replace with the OLD DDs present in our WebApplication..
Thanks
Jay SenSharma
http://jaysensharma.wordpress.com (WebLogic Wonders Are Here)
Maybe you are looking for
-
Spry menu bar not working in IE
Hi there, This is the first time I'm using Spry. Everything was fine until I tested the site in IE. My top menu moves position upon rollover and the submenu doesn't show at all. I looked at the forums and thought I would add the IE hack into the cod
-
Using af:clientListener after page load
Hi, I need to run a js function after* the page finishes loading. I tried to use <af:clientListener type="load" method="fillProjectList"/>, but the script starts running before the table on the page finished loading. The table has: clientComponent="t
-
3850's using WLC 2504 as a guest anchor
Hi, Does anyone know if it's possible to use a WLC2504 as a guest anchor when we have deployed 3850's for regular corporate WLAN? The corporate stuff is all up and running OK using 3850's but i've now to come to look at the guest provisioning and i'd
-
[SOLVED] What's the significance of 14871 (in /etc/shadow)?
In the /etc/shadow shipped with the filesystem package, we have lines like this: systemd-resolve:x:14871:::::: where the third field is always set to 14871, which is " the date of last password change, expressed as the number of days since Jan 1, 197
-
Flashback after rman reccovery???
Hi all, I have a scenario, I have taken a rman backup yesterday at 7:30PM. but one of my developer have deleted data from a table by 5:30 PM. We dont have the backup of the table before it was deleted. Now we recovered the database with the backup ta