Incoming International calls receiving problem.

Hi Team,
I have ISDN PRI E1 connection and i am able to recieve all international calls except two DID number. But I am able to receive national calls
without having any problem. Also noticed that We are able to recieve international calls from certain countries in these DID number.
Also noticed that call is hitting in the gateway and getting debug isdn q931 output with proper digit and Isdn Type:International.
For testing we replaced the phone with another,but issue has same.
Let me know either is there any problem with PBX system or problem with Service Provider.
Thanks in advance for your help!!!!
Best Regards,
Febin S

Hi
Provide the debug outputs " debug isdn q931" and "debug voip ccapi inout" when the incoming call is been made.
This will help you to identify the Release Cause for the Call, based on that you can decide the call failure reason while hitting
the Gateway.

Similar Messages

Roaming charges for incoming international calls?

That's pretty much my question. I read somewhere on here that I would NOT be charged for long distance or roaming if my IPhone 5 receives incoming calls from Germany. Before I tell my family that they can call me, I want to be absolutely sure of that.
Thanks for your help!

Just like a landline, an incoming international call will not have any add'l charges. But it will use minutes from your allotment, unless it is after 9pm (Or 7pm if you have an Alltel plan)
UPDATE: From VZW Website:
If someone calls me internationally from outside the U.S. will I be charged extra?
No, you won't be charged long distance or roaming fees if you're in the U.S and someone calls you from outside the U.S.

How can I block all incoming international calls?

How can I block all incoming international calls?

Verizon does not value me as a customer because they would not assist me with getting the blocks done. The services Verizon offered, "Family Base" does not block what I and many, many, many, more verizon customers need. The APP is working GREAT! In the 1st two days it blocked over 25 unwanted solicitations from India. It blocked "unknown", Private, 1234, 123456789566, 000-000-0000, and other 10 digit numbers! NOKIA has done a fabulous job with the developement of their APP. Verizon could block these calls but is not willing to do so and in the process try to sell me a product that wouldn't work.

Block incoming international calls?

I am getting incoming phone calls from 2348173632154 -- spam from a Nigerian caller! I cannot block it, because it is a 13-digit number and not a 10-digit number. Does anyone know how I can block it through other means?

Hi Gcambp8424!
I realize unexpected calls can be frustrating! Unfortunately, international numbers with more than 10 digits can not be blocked. Keep in mind, you will not be billed for receiving an international call while you a located in the United States. To view our Call & Messaging block feature visit:http://vz.to/1nMgSTH .
Thanks,
AyaniB_VZW
Follow us on Twitter @VZWSupport

How to add 900 to the CLI of incoming international calls where suppliers sends in "+"

Hello,
I am trying to modify the displayed CLI on my phones for international calls from the SIP provider we are using, they are sending international calls CLI in the format sip:[email protected], I'd like to replace the "+" with "900" to allow callback from the missed call directory. I don't believe I can match on the "+" using translation patterns on the router.
I am running a 2900ISR as the gateway and a CM 9.5 platform.
Thanks

Hi,
This is what I normally do on ISDN :-
voice translation-rule 100
rule 1 /^/ /900/ type international international
rule 2 /^/ /9/ type national national
rule 3 /^/ /9/ type unknown unknown
But this being a SIP I am trying :-
voice translation-rule 100
rule 1 /^/ /9/ for in country CLI's
and some rule that swaps "+" for 900, but I was under the impression + is a special character that does not match on a translation pattern ?

Incoming forwarded calls / ringtone problems....

Hi guys,
Hopefully someone can help!! I have a Blackberry Curve 8310, which I use as my direct number for work, but work also have another number forwarded to my phone for short periods of time over the course of a month.
When someone rings my phone normally, their number displays on my screen, and the phone rings.
When someone calls the number which has been forwarded to me, a message pops up saying something along the lines of "Unconditional forwarded call", then the number of the person who is calling displays, and the phone rings.
What I want to do is have a different ringtone for the second type of calls, so that if i miss the message that is displayed on screen, i know its a call which has been forwarded to me!
I've searched the internet and it seems a few people have asked the same question but have yet to read any helpful replys.
Can anyone help?
ps: Just to make it clear, the number that displays on my phone for these forwarded calls is that of the original caller, not the number of the phone that the call has been forwarded from.
Thanks in advance!!

There is no indicator for forwarded calls.

Stopping International calls

I would like to stop all incoming international calls can anyone explain how I can achieve this with BT. Neither I nor my wife have any international connections so do not want to phone other countries or receive international calls.

You can only do that with either one of the new phones from BT, see
BT Launch new phone to block unwanted calls
Or with an external device like TrueCall.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Looking for a International Calling Plan + Data?

Hello,
Let me first start by saying I am deploying to South Korea (Osan AFB) .
I am looking for a plan with unlimited data usage and at least 450 minutes. I was reading about your global phones and south Korea is CDMA so that is good. It looks like I would have to get a new Droid but that's alright.
I have a few questions though:
1. How does the data work for that plan? I don't quite understand how it works.
2. It says its $1.99 per minute, do you really charge by the minute? $1.99 is steep for a minute,
If I used 200 minutes at that rate my bill would cost $398 plus the taxes and other expenses.
3. What can the party I am calling expect? Would it have to be a world phone to?
I am just really trying to figure out how much this would cost.
Thanks,
Freddy

I would strongly reccomend AGAINST trying to use your Verizon service overseas. As you've discovered, the per minute rates are quite high, and your unlimited data plan will not work there, you would need to pay roaming rates for data as well, and they are no more palatable than the voice rates for international service.
Once you get to South Korea, you should research local carriers and get service from one that is affordable and has the services you need, probably a prepaid carrier.
To your last question, Verizon customers are not charged international rates for INCOMING international calls, so you could call back to the States from your local cellphone, landline, or VoIP provider, and they would be charged the same as if they were getting a call from another phone in the US.

Incoming & Outgoing calls number must view during making call & receive call

Under one contact name I have 4 to 5 Numbers (Local & International).
During the incoming & outgoing calls I would like to know that which no I receive and vice versa under that contact name.

Called ATT...they verified the problem and said it was an intermittent signal problem....
only issue is I have to keep the phone off to make sure I received voicemails....
Definitely NOT an iPhone problem, but an ATT problem.

I am facing call drop problem (incoming

I am facing call drop problem in my I phone 5 since morning today, Outgoing & incoming both.
However i switched off the handset & also pull out SIM from the Handset, again insert & reset the functions but it's stilll not working.
Please help.

Hi there Kuldeep Mishra,
You may find the troubleshooting steps in the article below helpful.
iPhone: Troubleshooting issues making or receiving calls
https://support.apple.com/kb/TS3406
-Griff W.

Skype international call problem

Hey all,
I have charged around 10$ for skype to go calls. everything was working perfectly fine for the past 2 days until today.
Problem:
Dialing the number and then it says "connecting, then dialing" however there is no sound at all starting from the connecting phase!, my friend picks up then it automatically declines/ cancels the call after 5 seconds of the call. i do a test call, works fine. skype to skype, works fine. where is the problem? why when it comes to international calls i dont hear anything?
i have been charged over 3$ for nothing and i need to know why this is happening

Am also having same proble, am unable to make an international calls to anyone in my home country. When i try to call, i can hear only the first ringing tone after that nothing and the receiver side there was no call reached.
Kindly check and let me know better solution and fix the issue soon.

Question about receiving International calls

I was waiting for a call from Europe (I am in the U.S.A.) and the caller states it rang busy. He tried twice to call my Skype number before reaching me on my cell phone. I know the phone wasn't busy because I could call it from my American cell phone number.
Do I need to enable or subscribe to international calls to receive them? I have an "Unlimited US & Canada" subscription.
Thanks.
Solved!
Go to Solution.

I'm sorry for such a thoughtless question. My privacy settings were blocking this incoming call.

My iPad 2 doesn't ring when there are incoming FaceTime calls. This problem started when I updated to iOS 8.1. IOS 8.1.1 didn't correct this problem. Any suggestions?

My iPad 2 does not ring when receiving incoming FaceTime calls since updating iOS 8.1. iOS 8.1.1 has not helped this problem. I checked the settings to make sure Restrictions were off. I cannot find anyplace that turns sound notification for FaceTime on or off.
Any suggestions?
Thank you

In spite of the fact that you said you checked the settings, I still believe that you have system sounds muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the control center if you are running iOS 7. Swipe up from the bottom of the screen to get to control center . Tap on the bell icon and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock can be accessed in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085
AS for your other issues, have you done any other troubleshooting like resetting your iPad, resetting all settings or doing a complete factory reset?

Can't receive International call which is on saved...

I hope someone can help me with this problem.....
I have a BT phone that has automatic barring of certain types of calls (withheld numbers, etc).
However, I do not have International calls barred as my brother lives in France and I did not want him to run the risk of being barred.
He is also in my saved list - his number starts 0033 for France then his own number.
If I call him from my saved list it connects ok (i.e. the number saved is correct).
However if he calls me from the same phone his call is barred - it is not shown in the display as one of my saved numbers AND it gets barred as an International call despite this feature not being used.
To be honest I don't want to get two different problems mixed up here so if someone could just tell me why he isn't being recognised as being in my saved list despite the saved number apparently being correct, then that would be a start.
Can I also mention that my other saved numbers (i.e. UK numbers) all come through ok and are displayed accordingly.
rrsvp with any ideas please....!
Solved!
Go to Solution.

International caller display has not yet been implemented by BT, which is why you are getting the problem.
See these threads https://community.bt.com/t5/forums/searchpage/tab/message?filter=labels%2Clocation&location=forum-bo...
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Problems with the Internal Calls in SPA8000

Hi Community,
I'm integrating a SPA8000 with latest firmware 6.1.10(001) against UC560 with 8.1. The calls between the analog phones connected to SPA8000´s ports against the SPA502´s phones connected to UC560 are working fine. Also between the UC560´s extensions to SPA8000 ports.
The problem are in the internal calls in the SPA8000.
Any idea why the internal calls in SPA8000 are not working fine ???
I follow this manual that I attached
Thanks in advance.

The problem was in the UC560, where you have to allow the following connections:
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip

Incoming International calls receiving problem.

Similar Messages

Maybe you are looking for