Incoming Mail Server Not Responding

Hi from a Mac Newbie...
I am trying to set up multiple email acounts to be accessed by Mail, and keep getting the "The POP server “mail.hotmail.com” is not responding. Check your network connection and that you entered the correct information in the “Incoming Mail Server” field. If it still doesn’t respond, the server might be temporarily unavailable". The same for just hotmail.com. Once I get this to work I need to set up gmail, too.
Am I typing something in wrong?
Thanks

Has it worked before on the pad.  If it has in the past, and does not now that means either the server is down or busy,  just wait a while.    or some how you have altered you name or password or some other server parameter inadvertently.
Third choice is you have dropped your Internet connection.  Is anything else on the Internet working?
Try the same account from safari using web,ail, or from another computer.  If it is down, it will be down there as well.  If it works there, but not from the pad, recheck the parameters and your connection again.

Similar Messages

  • Mail server not responding. Need help how to verify my account

    Mail server not responding. Need help how to verify my account

    There are instructions on this page for how to create a new account without giving credit card details (the instructions won't work with existing accounts) : http://support.apple.com/kb/HT2534
    Unless an account is created via those instructions then credit card details will need to be entered on it before the account can be used.

  • Mail server not responding, have checked details in mail settings, i pkone 4s

    Mail server not responding, have checked my details, help

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Try this: Delete the account in Mail and then set it up again.
     Cheers, Tom

  • I cannot access my email on i-pad or i-pod, get pop-up mail server not responding I have a problem with computer internrt

    I cannot access my email on i-pad or i-pod keep getting message server not responding although I am connected

    You need to go to options and switch back to classic

  • Incoming mail server not working

    Suddenly and for no reason, my Mac mail isn't working on my desktop.  Still works on my ipad and iphone though.  I see in account preferences that there is no "incoming mail server" written in the space but it won't let me write one in.

    nautilus,
    If you are using a G3 running 10.2.x as your profile indicates please re-post in the PPC based iMac's forums. This forum is for Intel based iMacs, the earliest Intel based iMacs shipped with Tiger 10.4.x

  • Mail Server Not Responding

    I have my own mail server.  When my iPhone is on the local WiFi, it can log in and read mail.  When it is on the 3G connection, it gets the message 'The mail server "intellexcorp.com" is not responding.  Verify that you have entered the correct account info in the Mail settings.'  The setttings are unchanged.  There is no firewall on the server computer.  I can't see why the same settings would have a problem connecting.  No other services, including mail and remote access have a problem accessing this computer by name or by IP.
    Please, do _NOT_ suggest that I check my settings.  As I have said the same settings work fine on Wifi.
    Randy Kaempen

    Reception is fine.  Already tried a reboot.  This is an ongoing problem over a period of months.  I can't undestand why the 'outside of network' connection can't get to the server while the 'inside the network' can, since there is no firewall and the exact same settings.  The mail server is not showing that it is blocking anything.  Puzzling.
    Randy Kaempen

  • HT1430 My email isnt working after updating iOS 6 I get a message - mail server not responding. Verify that you have entered correct account info in settings.- which I have Can anyone help me fix this?

    I recently updated both my iPhone and iPad to ios6 but since doing this I can no longer send or receive e-mails. I get the following message:-
    the mail server is not responding , verify that you have entered the correct account info in Mail setting -
    does anyone have any tips to correct this?

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Try this: Delete the account in Mail and then set it up again.
     Cheers, Tom

  • TS3899 Not able to access gmail thru iPhone. Error message states "mail server not accessible"

    Not able to access my Gmail in my iphone. Error message pops up
    "...... mail server not responding ........"

    Did this used to work or have you just set it up for Gmail access? Did you do it in accordance with: http://support.apple.com/kb/ht4810 ?
    Are you accessing it via cellular network or WiFi? If WiFi then is this your usual network?
    If it has been working fine for some time and now suddenly you get this message having changed nothing then it is most likely a temporary glitch at Google end or your ISP perhaps.

  • What is the incoming mail server adress and settin...

    Iam using Nokia 5230 when i select connect it is giving "incoming mail server not found check mail box settings"
    i have following settings
    User name: my name
    Passwword: ****
    Incoming mai server: POP3
    Access point in use: my internet connection
    Mail box name: yahoo.com
    Mail box type: IMAP4
    Security: off
    Port: 110
    {these are the incoming e-mail settings above}
    now outgoing e-mail
    My email adress: Email id @yahoo.com
    User name: my name
    Passwword: ****
    outgoing mail sever: SMTP
    Access point in use : My internet connection
    security: off
    Port: 25
    Plzzzzzzzzz help me are these correct setting if not plzz reply me the correct settings plzzz i will b thank all of u!!! hurrry....: :-( plzz

    A small correction to my own post above: Yahoo does offer free IMAP access to Nokia users. The server details are:
    Incoming IMAP server: nokia-free.imap.mail.yahoo.com, SSL.
    Outgoing SMTP server: nokia-free.smtp.mail.yahoo.com, SSL.

  • HT4864 the incoming mail server field is blank and will not let me type in the information. I can type in other fields but this blank field will not allow it.

    In account information the incoming mail server field is blank but when I try to type it in it does not allow me to.
    Whats do I do?

    Welcome to the Apple community.
    You do not need to start adding manual information into your iCloud account settings. If you feel the settings are incorrect for any reason, you should delete your account and add it back and let it set itself up.

  • I can't set up gmail in my iPad 2. Keep on saying ' can't connect with SSL and ask me whether to connect without using SSL, then I press 'yes' and it said again IMAP is not working and tell me to see network connection and incoming mail server.

    I can't set up gmail in my iPad 2. Keep on saying ' can't connect with SSL and ask me whether to connect without using SSL, then I press 'yes' and it said again IMAP is not working and tell me to see network connection and incoming mail server. No idea how to do anymore. Already tried to figure out. But not work. Can anyone pls help me?

    Nope, doesn't pass verification. I get the spinner for a minute or so, then the alert about setting it up without SSL. Are you suggesting I disable Fetch and Push BEFORE I enter the account details? Because I never get past the account details screen, unless I choose "Set up without SSL" after the warning.

  • Log onto incoming mail server (POP3): Your server does not support the connection encryption type you have specified. Try changing the encryption method. Contact your mail server administrator or Internet service provider (ISP) for additional assistance.

    Hi All,
    This is my first post to ms exchange forum am getting  Log onto incoming mail server (POP3): Your server does not support the connection encryption type you have specified. Try changing the encryption method. Contact your mail server administrator
    or Internet service provider (ISP) for additional assistance. in my outlook clients, till last Sunday (12.04.15) my exchange was well & good, Monday morning suddenly the problem started like none of our outlook pop3 clients are able to communicate
    with exchange (rest  IMAP, SMTP & Exchange accounts are working fine). i have tried with all port no but no luck. please help me to get raid of this one.
    Exchange 2013 CU6 with server 2012 Std 64Bit
    Thanks,
    Murali 

    Dear All,
    I have found the solution for above problem, the problem has occur due to PopProxy inactivity
    please find relevant exchange management shell commends below.
    1. Get-ServerComponentstate -Identity <yourmailserver.com> 
    Server Component State
    yourmailserver.com ServerWideOffline Active
    yourmailserver.com HubTransport Active
    yourmailserver.com FrontendTransport Active
    yourmailserver.com Monitoring Active
    yourmailserver.com RecoveryActionsEnabled Active
    yourmailserver.com AutoDiscoverProxy Active
    yourmailserver.com ActiveSyncProxy Active
    yourmailserver.com EcpProxy Active
    yourmailserver.com EwsProxy Active
    yourmailserver.com ImapProxy Active
    yourmailserver.com OabProxy Active
    yourmailserver.com OwaProxy Active
    yourmailserver.com PopProxy Inactive
    yourmailserver.com PushNotificationsProxy Active
    yourmailserver.com RpsProxy Active
    yourmailserver.com RwsProxy Active
    yourmailserver.com RpcProxy Active
    yourmailserver.com UMCallRouter Active
    yourmailserver.com XropProxy Active
    yourmailserver.com HttpProxyAvailabilityGroup Active
    yourmailserver.com ForwardSyncDaemon Active
    yourmailserver.com ProvisioningRps Active
    yourmailserver.com MapiProxy Active
    yourmailserver.com EdgeTransport Active
    yourmailserver.com HighAvailability Active
    yourmailserver.com SharedCache Active
    2. Set-ServerComponentState -Identity <yourmailserver.com> -Component PopProxy -Requester HealthAPI
    -State Active
    3. Get-ServerComponentstate -Identity <yourmailserver.com> 
    Server Component State
    yourmailserver.com ServerWideOffline Active
    yourmailserver.com HubTransport Active
    yourmailserver.com FrontendTransport Active
    yourmailserver.com Monitoring Active
    yourmailserver.com RecoveryActionsEnabled Active
    yourmailserver.com AutoDiscoverProxy Active
    yourmailserver.com ActiveSyncProxy Active
    yourmailserver.com EcpProxy Active
    yourmailserver.com EwsProxy Active
    yourmailserver.com ImapProxy Active
    yourmailserver.com OabProxy Active
    yourmailserver.com OwaProxy Active
    yourmailserver.com PopProxy Active
    yourmailserver.com PushNotificationsProxy Active
    yourmailserver.com RpsProxy Active
    yourmailserver.com RwsProxy Active
    yourmailserver.com RpcProxy Active
    yourmailserver.com UMCallRouter Active
    yourmailserver.com XropProxy Active
    yourmailserver.com HttpProxyAvailabilityGroup Active
    yourmailserver.com ForwardSyncDaemon Active
    yourmailserver.com ProvisioningRps Active
    yourmailserver.com MapiProxy Active
    yourmailserver.com EdgeTransport Active
    yourmailserver.com HighAvailability Active
    yourmailserver.com SharedCache Activ
    Replace yourmailserver.com with your server host name.
    Thanks

  • I am trying to disable "show notes in inbox" on icloud account but keep receiving error "incoming mail server cannot be empty"

    HI -
    I am trying to uncheck "show notes in inox" on my icloud account but keep receiving error message:
    "incoming mail server cannot be empty" message
    The incoming mail server on the account is set automatically is is greyed out so I cannot edit anything.  I also tred editing account.plist but the icloud account does not have the neccasary string to be edited as with my other mail accounts.
    Would apprecate any assistence.
    Regards,

    Hi there freegreg,
    You may find the troubleshooting steps in the article below helpful.
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/ts3276
    -Griff W.

  • Mail Problems - SMTP server not responding: "offline"

    I am currently testing DSL service for a month; set up Mail just before I downloaded the 10.7.3 release. Tested it once and it worked; did not use it to send emails since because I am only testing this (including the email address). I have been receiving emails (which I forwarded to myself from my cable provider's website); today, I wanted to send an email and a 6 hour troubleshooting saga began....
    Total of 2 hours with Centurylink tech support; 1 1/2 hours with Applecare, and another 30 minutes with Centurylink.
    During that time, all different settings were tried, turned on/off. POP server ok, SMTP server not responding. With Applecare, tried it on both the iMac and the Macbook; also tried it after booting into Snow Leopard - SMTP server not responding ("offline"). Applecare tech stated that it has to be the server since we tried it on two machines as well as SL. Centurylink insists there is nothing wrong with their server, but it's Mail's fault.
    So, I finally gave up for the evening, but wonder if there is something amiss with Mail in 10.7.3 (both machines are on the same version) and during the troubleshooting, I noticed an anomaly: in a new message window, there was no choice to choose an account to send from which I thought was odd.
    I was thinking of a new install or to clone back? My clones are up to date though, I have no older clones. I do have a fresh install but it's also the latest one from MAS. Or I could just boot from the fresh install and set up Mail to see if it would work?
    Grateful for any ideas....

    Thanks to everyone; as you can imagine, all settings/configurations were tried yesterday (even booting into SL); Apple said it's Centurylink's fault, and they insisted there was nothing wrong with their server.
    FWIW, I unplugged my Comcast cable (it is still active though and I'm getting TV reception, just unplugged the modem for now); right now, my internet access and email account are with Centurylink for the test. I still access my Comcast mail via their web interface email account.
    Anyway, thanks to a good friend's idea, I decided to check keychain access and to make it short: the issue is fixed and the problem definitely had something to do with the OS because:
    When I first checked keychain, this is what I saw:
    I then checked Comcast settings and there were two: one was checked "allow all apps..." and the other had the "confirm" with Mail listed under the applications.
    So I figured it's so screwed up, I probably can't make it any worse, so I deleted the Internet Accounts and added Mail to the smtp.centurylink...:
    And......... it then worked! These default "internetaccounts" obviously aren't being recognized by Centurylink's server?
    And, to make sure that was it, I not only did the same thing on the Macbook, but also booted into a pristine "backup" fresh install (no added apps or files, just default OS), launched Mail and couldn't send. Launched Keychain, changed the apps to Mail, and I was able to send email.
    I would call that a bug? Or not? In any case, I'll be calling back Applecare and tell them to add the above to the very long log from yesterday and to make a note that "internetaccounts" doesn't work with everything.

  • HT3610 my incoming mail server is not accepting my password. How can I change it?

    my incoming mail server is not accepting my password. How can I change it?

    Contact AppleCare and speak to someone in account security.

Maybe you are looking for

  • WS-Security

    Service is deployed in standalone server.While invoking method getting the following response. ------=_Part_4_407046509.1367926893806 Content-Type: application/xop+xml;charset=UTF-8;type="text/xml" Content-Transfer-Encoding: 8bit Content-ID: <effb6ee

  • Is there a cheap or free good alternative program to Filemaker pro that will work on Mavericks and allow me to open FM databases from version 7?

    I recently switched from a power pc (2004 I think) to a MacBook Pro, and had to upgrade so much. My old system was running Filemaker pro 7. I really need a good database program for my work (freelance/self-employed), and have forked out so much money

  • Cant transfer my photos onto new pc

    I had synched my photo album from my pc onto my Ipad 2. My pc then broke out of the blue. I am now stuck with all my photos on the Ipad and can't move them back to my new PC and I'm running out of memory. There are roughly 6000 pictures.  These are m

  • Blackberry Bold 9700 problem after upgrading software

    i downloaded the 6.0 software on my blackberry and after that it wouldnt let me connect my email account to my phone. so inrder to do that i had to download this app, forgot the name, but once it downloaded the phone needed to be rebooted, after that

  • GetOracleDecimal seems to leak memory?

    Hello, I am using the C# statement below to retrieve a decimal value from an OracleDataReader, adjust the precision, then assign it to a .NET decimal type: decimal volume = (decimal)OracleDecimal.SetPrecision(reader.GetOracleDecimal(5), 28); Over tim