"Incoming" Message tone wanted

Does anyone have a message alert which is a speeded up voice (like a Chipmunk) saying "Incoming!" closely followed by a missile / fastjet sound effect whooshing past?
If you do I will be eternally grateful if you can leave a reply and I will tell you my email.
Thanks
Matti
Regards Matti
Been a lover of Nokia since my 1st - a Nokia 101

Managed to hunt it down myself. It is a snippet taken from the game "Worms".
Job done.
Very funny txt alert.
Regards Matti
Been a lover of Nokia since my 1st - a Nokia 101

Similar Messages

N95 8GB - incoming message tone

A big frstration with my N95 8GB is that when you receive a text or MMS you get one notifying tone, then nothing. Does anyone know if the N95 has the facility to repeat tones to remind you that there's a message waiting. If so, how do you switch it on?
Thanks

by default incomming messeges has the tones which rings only one time as per messeges tones are created for short warn.. if u want to ring it long then only change the messege tone with a long one. and by default it can´t b repeat.. or only if u have light sensor on ur mobile which can remind u for unlimited time of period of a recieved msgs.
¨Arm yourself because no one else here will save you¨

E71 does it allow a incoming message tone?

Hi,
Does anyone know if the e71(with latest firmware) will play a tone when a new sms or email arives, or is it simply a notfication on the screen?

Yes, it will.
Menu>Tones>Settings>General>Personalisation>Tones>Message Alert Tone / E-mail Alert Tone
You can set your tones there.
Thank you for clicking on the green star if this has helped you!

How can i change alert tone for incoming messages on my ipad, for imessage?

How can i change alert tone for incoming messages on my ipad, for imessage?

Settings>Sounds>Text Tones

Tons of Incoming Messages

I am having a big problem with Apple Mail since upgrading to Mavericks. I have iCloud mail and my work email account is using IMAP. After upgrading everything was where it should be and it all looked OK. I received a few new emails and sent some too. A little later the Mail Activity showed Incoming Messages and it just kept going and going. When the first number reached the second number (xxxxx of xxxxx), the second number would jump higher and the process repeated itself over and over. During this time it would not receive any new email. If I quit Mail and started it again it would get new mail and then go back to the Incoming Messages activity problem. I saw it get up to 16 million!! I restarted Mail and it started over again from 0. I left it on overnight and in the morning everything looked normal with new email showing in the window. Then it problem started over. Right now the Incoming Messages activity is up over 520,000. No new email is showing even though there is new email on my other Mac. What is going on?

Same problem here. It doesn't seem to affect performance. I have 1 gmail account syncing, 2 Office 365 accounts (one university, one work) and one .me/.mac/.mobileme/.icloud account. I honestly don't even know what the mac one is called anymore. I cleaned up all the accounts through their respective web portals. There is nothing in the drafts, or spam, or even inboxes. There is a ton of archived messages in the gmail account, but no where near 22 million.
If anyone finds a solution it would be much appreciated.
-- mc

I carnt hear my message tone,the sounds it makes when the phone locks and opens.Also i am unable to hear my music playing from my phone but my alarm and ringtone are working.Can anyone help

i carnt hear my message tone,the sound it makes when the phone locks and opens,also i am unable to hear music when playing from my phone but my ringtone and alarm tone work.Ive made sure the silent button is not on,and the volume button on the side of the phone is just showing it blank instead of it going up and down.To try and fix this i have reset my settings and restored my phone,but now its just skipping the music i have purchased from itunes when in a docking station which is now another problem i have as well.Can anyone help????

Hello dbrookes,
Thank you for using Apple Support Communities!
It sounds like even though the Mute switch is not on, sounds are not making the, well, sound they should, and the volume buttons make a blank volume indicator appear on the screen that does not show the volume level.
I wanted to recommend a couple of things.
First, I would reset the phone:
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
From: iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If that does not resolve the issue, then you may want to try backing up to iTunes, and restoring the iPhone again but this time do not restore the backup and set it up as new to see if the issue persists without the previous configuration.
Just incase you need it, this article will help with that:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Cheers,
Sterling

Quoting/threading phenomena in mail.app -- due to problems in incoming messages?

Folks:
Mail 5.1 on MacOS 10.7.x
I began using Mail.app when I installed 10.7, shortly after the initial release.
No problems with respect to unformatted email or replying to short, trivial length formatted message. For complex, on-going discussions I feel that consistent and reliable quoting and threading behavior are essential.   But that is not happening in some cases. I'd like to figure out why, and what I might do to fix the issue.
(Note: I do not want to get into a discussion here of formatted versus unformatted email. Both have their pros and cons. Nor do I want to spend a lot of time debating this issue with my correspondents. As a matter of courtesy, I set Mail.app to respond using the same message format as the original message.)
When I reply to a formatted email, I notice that mail.app sometimes draws a dark grey box --with rounded corners-- around one or more incoming paragraphs, placing a circled "X" "close icon" at the upper left.   I don't get it. To what does this correspond? Why does mail.app mark-off this text and offer a "close icon"?   As far as I know I'm not doing anything that implies I might want to delete the text.
(Note: Rummaging around in the corresponding message source, it seems that these boxes correspond to blockquoted text in the received message.)
Editing within one of these boxes is really unpredictable. Sometimes I can select an insertion point and insert a line-break, in preparation of replying to the text just above. Sometimes nothing happens. Sometimes I can select text, and cut it. Sometimes nothing happens at all to the selected text.
Mail.app commonly doesn't correctly increase the quoting level in such paragraphs. Using
    Format> Quote Level>Increase
to maintain threading history manually is fairly easy since I've defined a function-key shortcut, which works some of the time -- but the effect of this command is unpredictable. Sometimes this command deletes the selected text entirely. (Grrrrrr!) The workaround I've found is to select smaller chunks of text. In such cases, this command generally works correctly.
Meanwhile, messages from exactly one person --who uses gmail exclusively-- are displayed in a completely unique threaded format by mail.app. The entire short history of 5 messages from him are displayed on multiple virtual sheets in one message window, with the latest first.    In one view, clicking on the "see more" link at the bottom of his messages unleashes a cool-looking accordion opening effect and displays my part of the thread. (I guess. I don't totally understand this display concept. But it looks very cool and seems to handle quoting and threading pretty well.)
What's going on?
My best guess is that mail.app is struggling with "inconsistencies" in the incoming messages from different people using various email clients. I seem to recall reading that email tech specs are a hodgepodge of evolving and contradictory standards. Is that correct?   Is that the root of my issue?
Many of my correspondents are non-tekkies and/or non-affluent, and they use whatever email client they can afford. Some could be using really old email clients. That doesn't help, right? Are blockquotes a really archaic formatting measure?
When these problems occur, they can cost me a lot of time and trouble. It's really distracting to have to deal with portions of the incoming message disappear.
I don't think it is practical to persuade my correspondents to upgrade their email clients. Some of them have trouble simply setting the preferences to support quoting.   Threading is a difficult concept for a few.
Any suggestions?   Any mail.app preference settings I might try adjusting? Any add-ins?   Is it possible to tell Mail.app "interpret all incoming blockquotes tags as simple breaks" or strip them entirely? Or ...?
TIA

haavee:
Thanks for your reply on this thread.
And thanks for the confirmation: Yes, often difficult, and completely unworkable in some cases.
To my surprise, I've been able to find very few people reporting similiar observations. Very little about this issue at all on the web.
I looked for command-key variations on Format --> Make Plain Text, hoping for a block action, but none I tried was any different.
Here is my current view of the issue:
• For formatted messages, each email client operates differently. If there is a standard it seems to be no more robust than "use simple HTML for formatted messages".
• The "can't insert" issue, as well as those mysterious rectangle-surrounded blocks, seems very correlated with the presence of html <div> sections in the message. It is awkward to experiment, so I've only done a limited amount. My observations so far:
-- I don't think you can insert text anywhere "inside" a <div>, and mail.app seems to treat <div> as a "sticky" attribute -- e.g/ very difficult/impossible to remove without deleting the text inside. The copy-style method doesn't seem to affect <div> tags.
-- Based on one case, it appears that message bodies composed of back-to-back <div> sections are impervious to inserts anywhere. (The email client used by one particular person with whom I've corresponded seems to build messages out of --you guessed it-- back-to-back <div> sections. Putting on my HTML coders hat -- I cannot see any sense at all in doing this. Smells to me like a kludge/hack, as you prefer.)
• What about an applicable mail.app add-in? I can find mail.app add-ins, but it seems the mail.app tech info (API) isn't public, so those that exist are based on guesswork about how it works. This means that add-ins must be re-tooled possibly for each new version of mail.app. Altogether, not encouraging for add-in developers. And, yes, consistent with that the range of functionality I've seen is rather limited. So, I've given up looking in the add-in category.
• Applescript has commands for controlling mail.app generally, but I didn't see anything approaching the level of function necessary to remove <divs> by global search-and-replace. (I'm far from an Applescript expert, so it is very possible I missed something.) Nor did I see any general command such as Clean up dodgy HTML in message. (I can dream!)
The only bit of progress I've had is finding TextSoap: http://www.unmarked.com/textsoap/ which may have promise. But I have had no time to evaluate it and it may be a month or so before I get a chance to check it out.
Looking at the upper right of the window in which I'm composing this message, there's a button "HTML" that lets me see --and edit-- the underlying HTML. On first glance, there's not enough functionality to, say, efficiently clean up all insert-resistant blocks in a message, but it looks practical to clean up individual blocks, and maybe that's all it would take.    Though I imagine that the user base for these forums is not very different from that of mail.app, I'm guessing adding this function to mail.app isn't even a dim possibity. Oh, well...
I note you are happy with your solution, so I'll try see if a variation of it might help me.
Thanks,
h.2

Do you have an option for block all incoming message and request EXCEPTED messages from my contacts?

Please help!!To whom it may concernDear Madam/Sir who works for Skype & Microsoft Dear all who can really help, Do you have an option for block all incoming message and request EXCEPTED messages from my contacts? or Do you have any solution to solve my problem from begin to now in present time? Even though, I set the Privacy settings: - Allow calls from... "people in my Contact list only"- Automatically received video and share screens with "people in my Contact list only"- Allow IMs from "people in my Contact list only" I still received unknow users sent me messages in every day, contact requests etc. And they're all clearly spammings and identity thefts. I only wanna contact with my family and my freinds here with Skype via my Windows device and my mobile phone (w/Android OS). And this is the only way to contact with them, because they could use Skype only in overseas. BUT I don't need new friend from other unknow Skype member. I keep blocked all unknow spammers in every day. However in this morning, I feel so scared with Skype on my mobile, I looked at my mobile Skype, I saw it automatically showed me the list of all blocked members. BUT they were all unblocked (contact unblocked) by my mobile (Android version) Skype itself automatically, and listed them one by one on the screen, and about 30 seconds later, they all were disappeared suddenly. I don't know what do to now, is it indicating my account was hacked?And how could I found out all those members again and block them again and delete all of them for ever? I appreciate if you would improve the privacy protection. Thank you very very very much.

Hrm... that may be true and this may be a function of the phone email client that Apple just doesn't do.
No, I can easily MANUALLY delete the messages. I would prefer if I didn't have to do it twice, tho. Once on the mail server and once on the phone.
What I think the phone needs to do is, when it checks the POP, anything NOT there should be removed locally. I think you are correct on POP; the phone will poll the mx (mail exchanger) and the mx will pass off the messages to the phone. The phone then keeps ALL of that unitl you manually delete it.
If, say, I remove a message from the mx, I would like the phone, when next polls, to see that that particular message isn't on the server anymore and remove it locally.
Perhaps it's just me but if I delete the message on the mx itself, via my ISP's webmail interface, I really don't want to have to remove it again from my phone.
thxs!
cheers
rOot

BPM: incoming messages disappear during send step

Hi,
I want to implement a message aggregation with the bpm tool.
For this reason incoming asynchronous messages should be collected and at the expiration of a time limit bundled and send synchronous. This synchronous phase takes ~40 sec.
Incoming (asynchronous) messages during the (synchronous) send step disappear.
SXMB_MONI: The status of the incoming message is "message scheduled on outbound side". The click on "Technical Outbound Channel" gives a popup "There are no workflows that have already worked with this object".
Once the synchronous send step is finished the status becomes "Message successful on outbound side" and the click is going to the workflow log (only one log for all messages). There is no entry for that message.
This happens both if a receiving step is active and if not.
Regards
Udo Martens

Hi, Abhishek:
The reason to use Fork is that all the branches can be reached.
By using switch, it only judge one input value and only one condition turns true.
Actually in most cases, the number of my input value is more than one, saying two or more message types generated.
And this is not multi-line situaion, because the messages generated are different types.
Your reply remind me to add switch inside fork.
Regards
Liang
Edited by: Liang Ji on Dec 8, 2010 5:32 PM

Incoming messages - E-Mail Alerts for Application Errors?

Dear C4C Community,
We are integrating C4C and our SAP ERP. Sometimes the business partner replication is not working due to unmapped entries or due to other reasons. Currently we are checking the web service message monitor manually for incoming message with status "Application Error".
Is there any way to setup an automatic e-mail alert when new incoming message errors appear? I do not like the manual monitoring process.
Looking forward to your feedback.
Best Regards
Matthias

Hello Matthias,
Try checking the below questions in your project scope.
Hope this should help you achieve what you want.
Regards,
Chandan

How to attribute a colour code to a incoming message in Mail?

I'd like to attribute colour codes to Inbox messages.
In Outlook, you can select a message and give hem a colour refering to a group or a map (categorize).
I use already smart maps for ordening my messages, but I still miss a visual code in my Inbox.
I also use the rules to attribute colour to incomming messages, but I need to be able to add a colour to a message out of the rule.
Please help!

Here's another way:
1. Convert the picture to grayscale. As usual there are many ways to do this but here are two:
Enhance > Adjust Color > Remove Color
or
Enhance > Adjust Color > Hue/Saturation,
and move the Saturation slider all the way left.
2. Add a blank layer above the picture layer.
3. Set the Foreground color to your new color.
4. Alt-Backspace to fill the new layer with the Foreground color.
5. Change the layer's blending mode to Color.
6. Lower the layer's opacity to get result you want.
In this example I set the Foreground to blue and Opacity to 30%.
http://www.pixentral.com/show.php?picture=11k0iWXbZQtl3ycjGtFKYwBuFUwlp1
You might also experiment with other blend modes, such as Overlay, Soft Light, Hard Light, and others. Each will require a different Opacity to get your result.

How to get target file name and buffer the incoming messages?

Hi Experts
I have one scenarion like
I wanted to find whether is there any file existing in target folder. If it exists I dont want to overwrite it but I have to buffer the incoming messages in some queue or something like that. And when ever the request comes next time I have to send the data buffered in queue first.
I dont want to add any time stamp for target file to avoide duplication.
Can we do this using XI. If yes please suggest me how to achive this.
Regards
Sowmya

>
Sowmya wrote:
> Hi Experts
>
> I have one scenarion like
> I wanted to find whether is there any file existing in target folder. If it exists I dont want to overwrite it but I have to buffer the incoming messages in some queue or something like that. And when ever the request comes next time I have to send the data buffered in queue first.
>
> I dont want to add any time stamp for target file to avoide duplication.
>
> Can we do this using XI. If yes please suggest me how to achive this.
>
>
> Regards
> Sowmya
there is no standard way to achieve this. I suggest a redesign.
post the files to a different directory and write a script which will move the file to the required target directory only if it is not present there.

Using BPM (Blocks) when Incoming message has multilple rows

Hi All,
I am using BPM in my scenario.I have a message with multiple rows coming.I want to check for a condition for each row of the incoming message.I am trying to use a block(Mode: For Each) and using a switch step inside this block.But in a block if u want to check for each line, we need to define a multiline container element as Source Interface message.Since I am already having multilple rows, I cannot give multiline option.Can someone give me some example scenarios where this type of scenarios are handled.
Thanks in Advance.
Soumya

Hi,
Here I am picking a file with multiple rows
The Sender Message Type structure is
<ns:File_MT xmlns:ns="http://File/send">
<recordset>
    <Slno />
    <Goods_Receipt_Date />
    <Material_Code />
    <Quantity />
    <Plant_Code />
    <Storage_loc />
    <Batch_Number />
    <PO_Number />
    <Item_Number />
    <Special_Stock_Indicator />
</recordset>
</ns:File_MT>
Here the row recordset has multiple occurences.
For my BPM I have defined an Abstract Message Interface of similar structure.
1)I am using a receive step to receive the message.
2)I am using a transformation step for structure change.
3)Then I have to check a condition whether each of the fields, ie material number,plant code etc are null or not.
I am using a switch for that.In the switch I have 2 branches-for error records and correct records.
Now in the eror record branch, I want to append error records to a container using a container operation and finally send it to another system.
Since my Source message is already having multilple rows.ie 0...unbounded for recorset, I can't define a multiline for container operation.The container operation expects a multiline container element when using append statement.
How should I go about this?Should I define a Loop after the transformation step?
Can you give me any example scenarios where transformation steps are used to change a source message with mutilple rows are used?I referred the FlightBooking Example, http://sap.com/xi/XI/Demo/Agency-SplitMultiplebookingOrder but in that they are not using the MessageTypes which are already defined, in the mapping.
Can anyone help?
Thanks and Regards,
Soumya.

Mac Mail "Incoming Messages" seems to be in and endless loop.

When I open Mac Mail it automatically stars downloading new incoming mail messages. The indicator bar in the bottom left of the mail window indicates incoming messages 1 of 20. It seems to go for ten minutes or so, then increases to 4 of 58, then increases to 10 of 112, then increases to 14 of 197... This continues endlessly until I eventually have to force quit the application. Seems like something is corrupted in one or several of my many mailboxes I monitor with Mac Mail. What can I do to fix this?

First thing to do is never post your actual email address in the forums; you don't want to get lots of spam as a result of spambots harvesting that address.
Next, login to the web interface of your .mac account and verify how many messages are actually there, both new Unread messages, and already Read messages. Write those numbers down and then logout.
Quit Mail and go to Home/Library/Mail and remove the mailbox for your IMAP (.mac) account. Then delete any files that start with Envelope Index.
Restart Mail and wait for it to download your .mac email again and rebuild your Mail index; then check to see if the problem continues.

I have an Iphone 4, is there a way to get new message tones?

I have the iphone 4 and I bought 2 ringtones from itunes but I wanted a message tone is there a way to buy message tones

It depends on what you mean by "save".
You can view the text(s) on your iPhone screen, and take a screen shot of your screen by briefly holding the home and on/off buttons together. Then you can save the resulting camera roll photo.

"Incoming" Message tone wanted

Similar Messages

Maybe you are looking for