Incoming orders Qty

Hi,
Incoming order quantities in MCTE is not matching with the no. of sales order quantities (VA05) for a given period. There is a small difference in it. I have following questions:
1. What could be the reason for this?
2. MCTE incoming orders considers what parameters from sales order.
3. How to know from LIS what are the parameters considered for charactristics like Incoming order, sales, billing qty, credit memo, credit memo qty etc. Where in config to go and see these settings?
Thanks & regards,

Arif,
As a Company whatever Order You got from the customer and entered in the System is your incoming order.
Simple Remember the following rule
Customer ---> Incoming Order -->Company( Process Order) --> Output ---> Customer
Thanks,
Raja

Similar Messages

Diffrence in incomming order qty and billing qty in cube 0sd_c03 & 0sd_c01

Dear All.
i have uploaded 2 cubes 0SD_C01 & 0SD_C01 from our R/3 data, SAP recommed for 0SD_C03 for sales analysis and their best practice is also based on 0SD_C03 but it is very strange the values of both the cubes are not the same when i run the report but the values of 0SD_C01 is 100% same as R/3 values i.e. mcsi reports show the same incomming and billing qty as i can see in report for 0SD_C01 but strang to see in 0SD_C03 there is diffrence in these values.
can any one explain why did this happen as SAP recommed to use lbwe data sources and their best practice also base on 0SD_C03 and the other one i.e. 0SD_C01 is based on old LIS structures.
during exploration i come to know that in some material orders incomming and billing quantaties are same but diffrence in most of them.
any help will be highly appreciated.
thanks & best regards,
Zeeshan

Hi,
There are somany Routines for Keyfigures in both Cubes, I hope you may using 0QUANT_B key figure for Qty, the reason is there may be some difernece in Routines in both cubes, so you need to check it tehn you check in teh reports, whether is there any restrictions, you need to iopen the each node and check i nthe both reports.
I also faced teh same problem with MCSI and BW reports, MCSI, we can customizi it an dut is just InfoStructure and having routines internally. So you need to take one material, plant and date where the diffrenece is coming then track it.
Check OSS NOTES:
Note 166996 - BW InfoCube 0SD_C03: incorrect incoming order qty
Note 1156259 - Update rules incorrect for InfoCube 0SD_C03
Thanks
Reddy
Edited by: Surendra Reddy on Aug 10, 2009 7:19 AM

Sales order qty not updated in copa

Hi Gurus,
My client has activated Costing based COPA.
We have activated Incoming sales orders with option
Transfer with date of deliery/scheduled billing date.
When We are posting sales order we are able to see a copa document with record type A.
In that document we want to see the Sales order quantity or delivery quantity, delivery date fileds.Please let me know what all the value fields We need to assign.
Do I need to write any derivation rule for incoming sales arders also.
we are able to capture the total price, material etc from the sales order in COPA document.We need only sales order qty or Delivery qty or delivery date to be updated in COPA document.
Please suggest me
Regards
Chaitanya

Hi Chait,
Pl check whether your client has assigned SD Qty Fields to COPA Quantity fields in KE4M. Sd quantity fields are FKIMG- Billed Quantity, KWMENG-Order Quantity and the same shall be assigned to ABSMG-Sales Quantity. If not, please maintain the same. Otherwise, we need to look for some other work around solution.
Trust this resolve your problem!
Cheers!

Logic for Open Sales order qty

What should be the logic given to determine "open sales order qty" during designing a report.
Note the criterias are as under:
1) Open sales order qty is the confirmed qty less the delivery qty.
2) The delivery qty should be delivery order qty (The delivery should not necessarily be pick, packed & PGI)

sorry it doesn't work for services, since they do not create requirements.
in this case you can use VBFA table, subracting all the delivered quantities VBFA-RFMNG with VBFA-VBTYP_N = J and VBFA-VBELV/VBFA-POSNV = to your order/item from the ordered quantities
hope this help you.
Roberto

Open order qty,Delivered qty,issued qty, and closing stock---Tables

Gurus,
I need to Prepare a report which will show open order qty,Delivered qty,issued qty, and closing stock.
Please help me with table names where i can find .
Regards
venu gopal

Hi,
Try EKPO & EKBE tables..
Thx
Raju

Open Purchase Order Separation from item Order Qty

Hi All,
Kindly suggest me how to separate open Purchase order from Item Order Qty.if i have 2 WH with different Order qty.in report it will be shown total order qty of both WH's.like
Item            WH              Order Qty
A                 01               100
A                 02                 50
                  or
A                 01                  0
i need like this A--150   OR A--50(order qty).
plz look into my query and suggest me how to do this.
select distinct t3.CardName as SuplierName,t2.[ItemCode], t2.itemname,t2.[U_pperson]as PP,((SELECT sum(T4.[OnHand])FROM OITW T4 WHERE T2.[ItemCode] = T4.[ItemCode] AND T4.[WhsCode] = '01')
+(SELECT sum(T4.[OnHand]) FROM OITW T4 WHERE T2.[ItemCode] = T4.[ItemCode] AND T4.[WhsCode] = 'EWH')) as Stock,t2.MinLevel as 'Min Bin',(((SELECT sum(T4.[OnHand]) FROM OITW T4 WHERE T2.[ItemCode] = T4.[ItemCode] AND T4.[WhsCode] = '01')
+(SELECT sum(T4.[OnHand]) FROM OITW T4 WHERE T2.[ItemCode] = T4.[ItemCode] AND T4.[WhsCode] = 'EWH'))-t2.MinLevel) as balance,
sum(t1.openqty)
as OrderQty,
t2.MaxLevel as 'Max Bin',(((SELECT sum(T4.[OnHand]) FROM OITW T4 WHERE T2.[ItemCode] = T4.[ItemCode] AND T4.[WhsCode] = '01')
+(SELECT sum( T4.[OnHand]) FROM OITW T4 WHERE T2.[ItemCode] = T4.[ItemCode] AND T4.[WhsCode] = 'EWH'))-t2.MaxLevel)as 'Balance II' from OPOR t0 inner join POR1 t1 on t0.DocEntry=t1.DocEntry inner join OITM t2 on t2.ItemCode=t1.ItemCode inner join ocrd t3 on t3.CardCode=t2.CardCode inner join OITW t4 on t4.ItemCode=t1.ItemCode and t4.WhsCode=t1.WhsCode   where t2.validFor='y' and t2.[U_pperson]='p1' or t2.[U_pperson]='p2' or t2.[U_pperson]='p3' group by t3.CardName,T4.[OnHand],t2.[ItemCode], t2.itemname,t2.[U_pperson],t2.MinLevel,t2.MaxLevel,t1.OpenQty
Thanks&Regards,
P.Pratap

Hi,
Try this:
select distinct t3.CardName as SuplierName,t2.[ItemCode], t2.itemname,t2.[U_pperson]as PP,((SELECT sum(T4.[OnHand])FROM OITW T4 WHERE T2.[ItemCode] = T4.[ItemCode] AND T4.[WhsCode] = '01')
+(SELECT sum(T4.[OnHand]) FROM OITW T4 WHERE T2.[ItemCode] = T4.[ItemCode] AND T4.[WhsCode] = 'EWH')) as Stock,t2.MinLevel as 'Min Bin',(((SELECT sum(T4.[OnHand]) FROM OITW T4 WHERE T2.[ItemCode] = T4.[ItemCode] AND T4.[WhsCode] = '01')
+(SELECT sum(T4.[OnHand]) FROM OITW T4 WHERE T2.[ItemCode] = T4.[ItemCode] AND T4.[WhsCode] = 'EWH'))-t2.MinLevel) as balance,
sum(t1.openqty)
as OrderQty,
t2.MaxLevel as 'Max Bin',(((SELECT sum(T4.[OnHand]) FROM OITW T4 WHERE T2.[ItemCode] = T4.[ItemCode] AND T4.[WhsCode] = '01')
+(SELECT sum( T4.[OnHand]) FROM OITW T4 WHERE T2.[ItemCode] = T4.[ItemCode] AND T4.[WhsCode] = 'EWH'))-t2.MaxLevel)as 'Balance II'
from
OPOR t0 inner join POR1 t1 on t0.DocEntry=t1.DocEntry inner join OITM t2 on t2.ItemCode=t1.ItemCode inner join ocrd t3 on t3.CardCode=t2.CardCode inner join OITW t4 on t4.ItemCode=t1.ItemCode and t4.WhsCode=t1.WhsCode   where t2.validFor='y' and t2.[U_pperson]='p1' or t2.[U_pperson]='p2' or t2.[U_pperson]='p3'
group by t3.CardName,t2.[ItemCode], t2.itemname,t2.[U_pperson],t2.MinLevel,t2.MaxLevel
Thanks & Regards,
Nagarajan

Is ther a FM to get the open order qty for a particular material &salesorg?

Hi experts,
I have requirement to find the open order qty for a given sales org (plant will be even better ) and material in my report. I do not want to use the standard tables as i need to fetch all records without any time restriction.So it is takin a lot of time.
I know i can find it in va05 but i want to know if ther is some standard function module which can serve this purpose.
Kindly help.
regards
Ashwin

Thanks for the reply,
Can you kindly elaborate what i need to pass to the function module ?
What do I have to pass in the tables LVBMTV and LSELTAB ?
In which field will i get the open quantity for the material and salesorg ?
Kindly help,
Regards
Ashwin

Order qty and confirmed qty mismatch

Dear friends,
My requirement is System should not allow to go further if the sale order qty and confirmed qty(after avaialbility check) mismatch is there.Pls suggest.
Now currently system will check the availability qty and will show the information of confirmed qty in the another screen.and if we say continue the process, we can go ahead and save the document.but the document will be in open state.
So pls suggest the way i can go ahead for this requirement.
Regards
Mahendar.

hi,
If u want to allow user to create SO as much as available qty..? means system sud create SO for order qty is equal to availble qty ...? if yes
then go the availbality check and find out availability check and checking rule..
and again go to OVZ9 remove the check box check with out RLT from rep.lead time tab
Resul is: If u enter in SO a10 qty ,and if you have only 5 qty in hand or in plant ,then system after checking the items it will change the order qty in SO(i e 5) automatically,
Caprin

Open order qty & values

I am using tye datasrc 2lis_11_v_itm for loading oen order qty & open porder values in to cube 0sd_c03
When I compare these values with va05 eneter sold to party & sale org,document date selct open sales orders & execute
Then in that report I am checking the fields Netwr_Ak ,Wmeng
But the values are not matching I am using the std updaterules & I didnot change

in the update rules of 2LIS_11_V_ITM when i check particular routine tme chars Calendar Year/Month is mapped to Date on which the record was created where as for other updare rules like 2LIS_11_VAITM ,2LIS_13_VDITMCalendar Year/Month is mapped to Update Date Statistics
Is it bacuse of this its not displaying the correct values

Open Order Qty

Dear experts,
We are devloping one report, where i want to find the open order Qty from POs having delivery date in next weeks period.
That is i wanted to find the POs having delivery dates in next weeks period from current date( Date i entered)
Which tables and fields and logic we can use for finding the same.
Regards,
MM

Dear,
Please Check ME2N.
Enter ME2N, select selection parameter as WE101.
Click on execute button .
Also use table EBAN for purchase order Delivery date and field is LFDAT
Regards,
Mahesh Wagh

Production order and planned order qty should not consider in MRP

Dear All,
i do not want to consider the previous month production order qty and plenned order qty (Nothing but WIP qty) in the current momth MRP, but the stock has to consider in MRP.
Example,
Before MRP,
material : XYZ
Stock : 1000
Prod Qty : 500 for 02.04.2008
PIR Qty : 2000 for 02.05.2008
After MRP, the requirement should be as below said,
material : XYZ
Stock : 1000
Prod Qty : 500 for 02.04.2008
PIR Qty : 2000 for 02.05.2008
Pld OrdQty : 1000 for 02.05.2008
For the above requirement ,i have done settings in the availabilty check like , for include planned order and include production order are "DO NOT TAKE IN ACCOUNT".
Even then also the planned order qty is generating for the "500" only.
please give the solution for the above said requirement.
thanx in advance
Regards
Srinivas

hi
MRP will always consider the prod order qty while doing nert req calculation.One thing u can do is TECo the prod orders and un MRP then it wont consider prod order qty.
The Availability check will check whether the components r avalaible or not based on ur scope of check
Reward points if useful
Amit

Sales Order Qty Confirmation Issue

Hi
I have created the order form my material with quantity of 10 units. The total unrestricted stock available for the material is only 5 units.
When I look at the schedule lines, the total order qty is confirmed even though the short of 5 unit of stock.
I was confused here. By right, the order should only confirm the 5 unit with respect the stock availability. But I dont understand why system has
Confirmed the 10 units completely.
If my understanding is correct, the sales order has to confirm the sales order based on the stock. In later stage, once the stock is up, we need create the
Schedule line for the remaining qty by re-do the availability check function.
Could you please someone correct me on this order confirmation logic !!
Regards
Priyan

Hi SS
Order is a normal (Type: OR) Trade order. And there is no consignment stock maintained for this material.
In MMBE, I can see only unrestricted stock exist for this material.
Please confirm whether my material setup is correct.
It is usual vanilla setup.
My doubt is that how come the order item has been confirmed with excess qty and system allows us to create the delivery as well.
Firstly, on what basis the order full qty has confirmed.
Please advice.
Regards
Priyan

Sales order qty not confirmed when delivery done with partial qty

Hi Guru's
Need your help............
We have issue in drop shipment scenario process. Sales order created with 10 line items from CRM and order released from CRM and replicated order to ECC and backend created PR also. After that user set reject status for all items so that PR line items also deleted, again user released rejection status for all items and line items updated in the same PR with different line item number for materials then PO & GR also done in ECC and stock also allocated for sales order line items but still sales order qty not confirmed in CRM sales order.
I checked all configurations regarding availability check but could not found.
Example:
Sales order line item qty: 4 - 2 qty confirmed (delivered).
For remaining qty (2 items)I have done GR. After GR It is allocated to sales order but it is not confirming the order quantity.
plz help me to fix this issue?
regards
sai

Hi,
Please check In ERP transaction OVZJ, for the sales org, distribution channel, and division that is being used in the affected sales orders, set the Avail. Check Rule to 'E'. Then retest the issue, as this might help.
Regards
Gavin

Sales order qty not possible to change.

hi experts
i have created a sales order with suppersession material for 2 qty and we deliver only 1 qty to customer.
now i want change the sales order qty 1 so that status gets completed.
but in VA02 material qty is in hidden mode cant possible to make changes. this is happening with suppersession material only.
need your support
thank you

hi dear
thanks for the reply again
schedule line is also in grey mode. cant possible to make changes.
let me add on this
when we create order suppersession material entered with item cat. TAPA which generate automated second line item cat TAN. when we make delivery TAN gets copied in the DO and Billing afterthat.
but issue is once delivery created. in VA02 order oty field (KWMENG) become in grey mode. cant possible make any changes ?
i have checked both the item categories completion rule which is (not relevent for completion)

Sales order qty display

On my sales order qty only 'four digit' numbers show up.
For example, 1000 will show up on the print out.
However, 10000 will not show up and will be desplayed as *000 with an *
How do i get all digits to display?
Edited by: ManjeetSingh on Mar 16, 2010 1:42 AM

Ask your ABAPer to do the changes in the Smart Form of Sales Order.It is due to settings maintained in the Smart Form which allow to show only 4 digit for Sales Order Quantity.
Best Regards,
Ankur

Incoming orders Qty

Similar Messages

Maybe you are looking for