Incoming/outgoing calls either hang up or do not ring.

Over the last month, Skype has been giving me and others in my house issues.List of symptoms:Incoming/Outgoing calls do not ring.  However, you recieve a missed call notification.Incoming/Outgoing calls ring but are immediately dropped.This has happened to me and others in my house when using a laptop with wifi and/or a PC with an ethernet connection.  Sometimes it works, sometimes it doesn't.  I have the most current version on Skype (in fact, installed an update last night). I do have comcast but figured it wasn't an Internet issue since I can access all web sites.  This only seems to happen when using Skype. Anyone else having this issue?  Know of a way to fix it?  Thanks.

"Is there anyway to keep it active after hanging up on an incoming phone call. Seems this happens if the phone is in standby when it comes in and answered."
Hmmm. How is it that you're ending the call? If you're using the "End Call" option and pressing on the button, then it SHOULD stay on. I don't have the manual right here in front of me, but you could download it for yourself and see what it has to say about this. Here is the link for the pdf version.
http://www.apple.com/support/manuals/iphone/
Hope this helps out. Oh and if you want, you can right click on that file and choose to download it to your system. Otherwise it will probably display right in your browser.
Message was edited by: QuickDraw

Similar Messages

  • No voice during incoming outgoing calls

    Hi, if anyone faced this issue before....there is no voice heard during incoming outgoing calls. However, we are able to talk on Skype or listen to music.

    To me this sounds like the RTP stream problem - it probably does not pass the firewall / nat on the way between SIP provider and you.
    What may have happenned is, that either on your Belkin router/NAT, or on internet ISP's router/NAT the SIP ALG (Application Layer Gateway) was enabled.
    If this is the case,  you need to disable SIP ALG on your router and/or ask your internet ISP to disable it on the firewall router.
    Another issue may have been if you have (accidentaly) changed the port forwarding on your Belkin router, and/or the PAP2T local LAN IP address changed and the port forwarding no longer works.
    So my proposals to check would be :
    - check and DISABLE SIP ALG on your Belkin (if router has this feature)
    - check the port forwarding on your Belkin router ... IF you setup port forwarding for 5060/61 you MUST set the same for RTP ports (16384-16483)
    - if you don't have port forwarding on your Belkin, try to setup forward of 5060-5061 AND 16384-16483*.
    *(If this is too many ports, set the the RTP portrange on PAP2T to 16384-16394 for example and then forward only that range)
    - if neither of above helps, change your Line1 SIP port from 5060 to let's say 6070, and RTP ports to the range let's say 17300 - 17310
    - last you may do on your side is to remove all port forwarding and put the PAP2T to the DMZ settings of your Belkin router.

  • Incoming & Outgoing calls number must view during making call & receive call

    Under one contact name I have 4 to 5 Numbers (Local & International).
    During the incoming & outgoing calls I would like to know that which no I receive and vice versa under that contact name.

    Called ATT...they verified the problem and said it was an intermittent signal problem....
    only issue is I have to keep the phone off to make sure I received voicemails....
    Definitely NOT an iPhone problem, but an ATT problem.

  • HT204266 i am looking for Apps, which can automatically record all the incoming & outgoing calls, which later on can be emailed.

    I am looking for App, which can do automatically record all the incoming & outgoing calls & later on same conversation should be whatsapp or emailed.

    I actually figured it out......  this was the answer:
    dial-peer voice 1 pots
    destination-pattern 1..........
    no digit-strip
    port 0/0/0
    forward-digits all

  • I wish to keep my incomming / outgoing calls  switched off, while 3g / E should be enabled,

    I wish to keep my incomming / outgoing calls  switched off, while 3g / E should be enabled, I dont want to be disturbed with incomming calls while surfing, is there some way to do this in Iphone 4.?

    No. The only thing you can do is reject the call when it comes in.

  • How can I separate incoming / outgoing call times?

    Hello,
    I'd like to know, is there's any app or tweak which makes my iPhone to be able to separate incoming and outgoing call times?
    Thanks in advance,
    Marcell

    Go to your recent call list - on any contacts click the blue arrow - it will show you the incoming and outgoing calls separatley.

  • My iphone 4 no any voice incoming & outgoing call

    Please help, my phone no sound incoming & outgoing call

    Hi qabil_
    Welcome to the Support Communities!
    The following article will provide some troubleshooting steps for this issue:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    I hope this information helps ....
    Have a great day!
    - Judy

  • When someone calls me on FaceTime it does not ring

    When someone calls me on FaceTime it does not ring

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457
    For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
     Cheers, Tom

  • Abroad - All incoming & Outgoing Calls have Barred on HTC M9 - Need PIN to unbar

    Hi. I landed in Corfu yesterday and I am on 4GEE Extra with HTC M9. Included in package is free international calls and texts. I was able to make and receive a call immediately on entering country... however after a few hours I found I could do neither. On looking at my settings I have noticed that although International Calls are Enabled, 'All Outgoing' & 'All Incoming' caals are disabled... and when trying to enable them it asks for a PIN. The obvious PINs do not work and I have never set one. I have checked over the internet and notive this has happened quite a lot. I have potentially narrowed it down to either the SIM needing reseting by EE or need a PIN2...? I cannot phone 150 so a bit stuck. Need these calls and texts to keep in touch with family so would be so grateful if someone could help please. Thank you (will come online later to check if their is a reply)
    Mark

    Hi ,
    It is not possible to activate roaming via your phone settings. If you can get to a landline to give us a call we will be able to activate this for you.
    Please click here for contact details.
    Thanks
    James
     

  • Incoming/Outgoing Call Problem

    Earlier today, my friend's iPhone was working fine. Then he plugged it into the cassette deck with stereo 1/8" output into the cassette deck to listen to some tunes. Now, he can't hear or be heard when he makes a phone call. The calls still come through and he can make and receive calls, just not hear anything or be heard. When the volume is adjusted, the screen comes up and says Ringer and "headphones" in parenthesis. Can anyone help him to get back to a normal non headphone world?

    If the cassette device you were using does not say that it can be used with the iPhone, it is not a good idea to use that device. This may be the problem that you stumbled upon. I also believe that using these "unapproved for Iphone" devices can void your warranty, so it is best to steer clear of using them. Specifically about your problem, I am sorry to say that I can not help

  • "no voice service" no incoming/outgoing calls

    Recently purchased the Q10 & for the first day & half had no dramas.
    After that time I then began to experenice problems calling out. The device stating a call failure please try again later. I was in full reception & was able to use the device & it's other features without any dramas at all, using facebook & twitter etc.
    I originally thought it may have something to do with my service provider. After an exhausting & frustrating phone call with them they found no issue with my service but concided that they couldn't even call my phone.
    I then updated the software on the phone to the newest update. The phone worked again perfectly for about an hour until again the problem recurred.
    I am sure it is a software problem as I am writing & sending this while on my Q10 in the middle of Australia where at times data coverage is a premium.
    I look forward to a promt reply & solution to this issue

    Hi anyo and welcome to the BlackBerry Support Community Forums!
    What version of software do you currently have installed on your BlackBerry Q10? If you insert your SIM into another device, are you able to send and receive phone calls?
    Thanks.
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • SIP trunk INCOMING/OUTGOING calling issue

                    Dears,
                               i am facing  issue i.e inbound / outbound  calls are not wokring  after  configuring SIP trunk . the call flow is
    SERVICEPROVIDER--------sip trunk------VG --------------sip trunk ----------CUCM
    For Outbound calls ---error-----tot tot tot
    For Inbound Calls -----error--- Silence
    Below are the configuration and debugs:

    Appreciate if some provide me Sip configuration and troubleshooting guide...Thankyou

  • UC560 How can I configure a Patton for incoming/outgoing calls ?

    Hello,
    I have an UC560 and a gateway patton ISDN/T0 who's connecting to the phone provider (Orange / France Telecom).
    Is someone had already configure this ?
    Thank you very much,
    Stephane.

    Sorry i dont give many details.
    I cannot install Cisco UC in the another room it's a problem of responsibility (not a technical problem but an administrative problem).
    And because this config dont want help me, I have only one fiber channel for link my room to another t0 room. Vlan data/admin/VoIP are in the trunk.
    Thank you,
    Stephane.
    Sent from Cisco Technical Support iPhone App

  • UC520 SIP trunk unable to make outgoing calls, incoming calls are ok

    I have an new SIP trunk set on an UC520 and the incoming calls are ok, but the outgoing calls are getting an busy tone(not working).
    The bellow trace is showing that the cause is "No route to destination (3) ". The question is this route has to do with the firewall(ip routing) or with the voice translation rules?
    001866: //3439/91242E51926F/SIP/Call/sipSPICallInfo:
    The Call Setup Information is:
    Call Control Block (CCB) : 0x843CE50C
    State of The Call        : STATE_DEAD
    TCP Sockets Used         : YES
    Calling Number           : 0777777777 <- main sip number
    Called Number            : 0888888888 <- called number
    Source IP Address (Sig  ): 0.0.0.0
    Destn SIP Req Addr:Port  : 0.0.0.0:0
    Destn SIP Resp Addr:Port : 0.0.0.0:0
    Destination Name         :
    001867: //3439/91242E51926F/SIP/Call/sipSPICallInfo:
    Disconnect Cause (CC)    : 3
    Disconnect Cause (SIP)   : 200

    Hi Emil,
    I've added bind control and media interface but outgoing calls are the same blocked, strange thing is that the cause is still no route to destination (3)
    but
    UC_520#show sip-ua status
    SIP User Agent Status
    SIP User Agent for UDP : ENABLED
    SIP User Agent for TCP : ENABLED
    SIP User Agent for TLS over TCP : ENABLED
    SIP User Agent bind status(signaling): ENABLED 10.10.10.5 <- fa0/0 IP address
    SIP User Agent bind status(media): ENABLED 10.10.10.5 <- fa0/0 IP address
    SIP early-media for 180 responses with SDP: ENABLED
    SIP max-forwards : 70
    SIP DNS SRV version: 2 (rfc 2782)
    NAT Settings for the SIP-UA
    Role in SDP: NONE
    Check media source packets: DISABLED
    Maximum duration for a telephone-event in NOTIFYs: 2000 ms
    SIP support for ISDN SUSPEND/RESUME: ENABLED
    Redirection (3xx) message handling: ENABLED
    Reason Header will override Response/Request Codes: DISABLED
    Out-of-dialog Refer: DISABLED
    Presence support is DISABLED
    SDP application configuration:
     Version line (v=) required
     Owner line (o=) required
     Timespec line (t=) required
     Media supported: audio image
     Network types supported: IN
     Address types supported: IP4
     Transport types supported: RTP/AVP udptl

  • How does a single cisco router network enable outgoing calls for small businesses if no dial plan is used

    Hi Cisco techs,
    I was recently asked this question at work from the rest of my team as they know I am doing studies for cisco ICND 1 & 2.
    And couldn't answer them.
    Or does this require more information like hardware used etc?
    Had searched Google to ambiguous results.
    Can someone give me a link to advise please
    Thanks in advance again..

    Dear,
    For small business (up to max 450 users) we use Call Manager Express (CME) which is configured on Cisco Voice router.
    If no dial plan is used or configured then none of callmanager can do external outgoing/internal calls. Dial plan is basic thing which must be configured on cisco voice router (e.g. CME).
    If you have configured Phones (ephone & ephone dn) and if they are registered on callmanager express then for internal calls you dont need to configure dial plan because callmnager have all the information of its phones.
    If you want to  have external incoming/outgoing calls for CME then you will have to create dial peers/dial plan.
    For a CME lab setup, you can visit below link.
    http://cisco.jjc.edu/cnt208/PDF/CCNP4_lab_2_1_en.pdf
    Suresh

Maybe you are looking for

  • New HH3 - Issues with Kodak Printer and iPhone 3GS

    Hello, Here is the background: Previously had a D-Link DSL-G624M router and everything connected wirelessly. This included 2 laptops, Kodak ESP 5250 Printer and iPhone 3GS. Router broadcasting on channel 6 (locked). Since upgrading to Infinity replac

  • Script line

    hi, can I higliht one line in sap script witout box. eg.  /   &KNA1-KUNNR&

  • Last Backup late never changes

    I have installed Oracle 10g on a Linux server. I let the install create a database and set it up for automatic backup. The Oracle Enterprise Manager, Database Home page shows a backup was taken a number of day ago and has a green check mark next to i

  • Error when edit my interfaces determintation

    Hi all, I have a problem with mi FTP to SOAPxi scenario when I indicated OM (Operation Mapping) and SW (software component version) on my "Interfaces Determination" I have processed two test (One correct but without mapping and one wrong with mapping

  • After Effects CC disabled menus after install

    After installing After Effects CC on MacBook Air (2012), AE starts but nearly all menu items are disabled.  Specs of machine seem to be OK (OpenGL 2.1, 8GB RAM).  Render Engine comes up immediately and items like New Composition are disabled.  Looked