Incoming sip calls are not working but outgoing is working with cme

I have CME setup with voip.ms on my 2800 router, my outgoing calls are working but my incoming calls are not. Below is my config, please let me know if it is something with my config:
voice translation-rule 3
rule 1 /^9142281$...$$/ /\1/
voice translation-profile INCOMING_CALL_1
translate called 3
dial-peer voice 1 voip
translation-profile incoming INCOMING_CALL_1
session protocol sipv2
session target sip-server
incoming called-number .%
voice-class codec 1
dtmf-relay rtp-nte
no vad

I made the change, but I am getting no output from debug voip ccapi inout. What does concern me from debug ccsip messages is:
Aug 31 12:42:04.195: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 400 Bad Request - 'Invalid Host'
Via: SIP/2.0/UDP 107.6.67.238:5060;branch=z9hG4bK000d3c36;rport
From: "+19144410197" <sip:[email protected]>;tag=as7439b9c1
To: <sip:[email protected]:1061>;tag=829C8-2532
Date: Sun, 31 Aug 2014 12:42:04 GMT
Call-ID: [email protected]:5060
CSeq: 102 INVITE
Allow-Events: telephone-event
Reason: Q.850;cause=100
Server: Cisco-SIPGateway/IOS-12.x
Content-Length: 0
I also am getting this:
voicertr2#debug ccsip error
SIP Call error tracing is enabled
voicertr2#
Aug 31 12:45:07.359: //-1/xxxxxxxxxxxx/SIP/Error/sipSPI_validate_own_ip_addr: ReqLine IP addr does not match with host IP addr
Aug 31 12:45:07.359: //-1/78AE76E98009/SIP/Error/sact_idle_new_message_invite: Invalid URL in incoming INVITE

Similar Messages

Incoming skype calls are not ringing on my iphone

incoming skype calls are not ringing on my iphone. It used to work but now doesn't. I can't find anywhere in the settings to fix this.
Any suggestions?
Solved!
Go to Solution.

Ever since iOS5 the ringer and display does not work. No notifications.
I live in a gated community and the gate is assigned to my Skype number. I also have clients who call me and they aren't getting through.
If I have to purchase a land line, I will sue in small claims for the cost of the service and loss of service.
Do not waste anyone's time with cookie-cutter answers.
My Skype isn't ringing nor shows up on the screen ever since iOS5. You should have been working on this with the developer packs.
I've deleted and reinstalled 3x. It is running. Volume is correct.
This is outrageous as I pay for Skype and am thinking of canceling and demanding a full refund.
You are pushing things towards class litigation here in the US. There is no excuse.
Microsoft now owns Skype. They are a US corporation and are liable.
iPhone4
iOS5
Skype 3.5.117(3.5.0.117)
Notifications: Sound ON Alerts ON
Volume is at 100%
Ringer is at 100%

HT201412 Safari could not open the page because the server stopped responding- new ipad mini's (2 from separate places) are not working with At & T router but computers work. Can you please help me. I've tried everything. Thanks ya'll!

Safari could not open the page on my new ipad mini's because the server stopped responding- new ipad mini's (2 from separate places) are not working with At & T router but computers work fine. Yesterday I got it to work. Weird. Can you please help me. I've tried everything. Thanks ya'll!

Hello SavannahSweetie,
I was looking into the issue you are desribing, and found a great article for troubleshooting wifi connections with iOS devices. It's called iOS: Troubleshooting Wi-Fi networks and connections and can be found here: http://support.apple.com/kb/ts1398.
Start with this section, and work your way down if needed.
Basic troubleshooting
Tap Settings > Wi-Fi and turn Wi-Fi off and then on again.
Verify that you are in range of your Wi-Fi router or base station.
Confirm that your Wi-Fi router and Cable/DSL modem are connected to power and turned on.
Check whether other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Update your Wi-Fi router to the latest firmware.For AirPort Base Stations, refer to this article for information about firmware updates. For third-party Wi-Fi routers, check the manufacturer's website for details on updating your firmware.
Restart your iOS deviceHold the On/Off button until "slide to power off" appears. Slide to power off your device. When it is off, press the On/Off button to turn it back on.
All the best,
Sterling

AcroPDF ActiveX print functions are not working with Adobe Reader 9.2 / Actobat Reader 9.3

AcroPDF ActiveX print functions are not working with Reader 9.2/9.3. Tried ActiveX print functions like printPages(), printAll(), printWithDialog(), none of them is working. Tried on platforms: XP 32 bit and Win7 32 bit. These print functions all work fine with Adobe Reader 9.1.0. or 8.2.0 or 8.1.0 on XP 32 bit or Win7 32 bit.
The way I have my setup: I have created a C/C++ project with AcroPDF MFC ActiveX classes. I have created an AcroPDF object in there, and then calling it's LoadFile() function passing a pdf file in the parameter. Then calling the printPages() or printAll() function. With Adobe Reader 9.1.0. or 8.2.0 or 8.1.0, printing is starting through the default printer without any problem. As soon as I update the reader version to 9.2 or more, the same code stops working.
Is anybody noticing any similar issue? Any info on this will be highly appreciated. Thank you!

Unfortunately printWithDialog() is also not working. Actually none of the print functions like Print(), printWithDialog(), printPages(), printPagesFit(), printAll(), printAllFit() are working. All of them works fine though with older reader.
BTW, what security related changes are there for printPages() and printAll()? Can you please elaborate on that? Is there any workaround?

Savevid and keepvid are not working with os 10.7.3-Is there a fix?

savevid and keepvid are not working with os 10.7.3-Is there a fix?
Is anyone else having this problem?

A massive thanks from me too after discovering the problem when I started work this morning at 2.30am - not something you need that time of day! Did exactly as written and bingo, missing tool icons appeared BUT, and there's always a but...
I have THE SAME problem in Quark with some of the static areas in the measurement (F9) bar. Can anyone suggest what might fix this? I have restarted just ONCE after turning on Extension Manager at start-up.
Hardware:
Apple Macintosh MacPro 2x2GHz Dual-Core Intel Xeon
RAM: 6Gb (667MHz DDR2 FB-DIMM)
HDD's (internal): 1x160Gb / 1x500Gb / 2x1500Gb
Software (OS)
OS: Mac OS 10.7.3 (updated to this 06.02.2012)
Problem software: QuarkXPress 8.5
Thanks in advance for any advice / help...
Paul

ADF bindings are not working with inheritance heirarchy.

ADF bindings are not working with inheritance heirarchy. I am using embedded OC4J in JDeveloper 10.1.3.2.
For the data model I have the following objects\attributes.
1) User (abstract EJB 3.0 POJO)
- Id
- userId
- userName
2) Employee -> extends User (EJB 3.0 POJO)
- enabled
- password
3) Manager -> extends Employee (EJB 3.0 POJO)
- numOfEmployees
4) UserSessionBean (Stateless Session Bean)
- public User findUserByUserId(String userId)
- public List<User> queryUserFindAll()
- Object mergeEntity(Object entity)
I created 2 JSF pages using ADF.
1) ListUsers.jspx - Lists all the users of type Employee and Manager in a table. You can select an user and chose to modify the user details using a modify button.
2) ModifyUser.jspx - Modify the selected user and persist the modified user details.
I implemented ListUsers.jspx by dragging and dropping queryUserFindAll() method from the ADF datacontrol on to the JSF page and selected ADF Table format with selection enabled.
Similarly for the ModifyUser.jspx page I dragged and dropped the User object returned by findUserByUserId(String userId) and selected ADF Form format. I selected OutputText field types for userId and userName.
I then created a navigation case from ListUsers.jspx to ModifyUser.jspx and pass the selected user.
Now when I try to run the web application, ListUsers.jspx correctly displays all the users. Then I select a user of type Employee and click on the modify button. This brings up the ModifyUser.jspx page. However, the UserId text field displays the value for "Id" field rather than "userId".
Question that I have is:
- Why is ADF framework not able to retrieve the appropriate user attribute value for a Employee based on the binding information in case of inheritance ?
Thanks,
Piyush

Hi,
tried with JDeveloper 10.1.3.3 and this works for me. Try JDeveloper 10.1.3.3 - if it doesn't work, have a closer look at your sessionFacade
Frank

Bluetooth and calls are not working properly

Please somebody help me!!!
I have a Hyundai Elantra 2012 and a Curve 9300, the bluetooth has been working fine for a year, however my phone is having problems to connect to my car, what is funny is that I can watch a video and the sound will come out from my car's speakers, I can be listening to a mp3 by using the car's speaker, but phone calls won't get through, I tried to connect my wife's BB10 to my car and everything is perfect.
My question is, what went wrong???
Thank you!!!

I have a similar problem
Product - HP Pavillion dv6 7135nr
OS - Win 8
Bios - F24
After updgrading from win 7 to win 8 following are the issues I am facing
a. Wi-Fi not working
b. Bluetooth not working
Earlier I spoke to online chat and on their advise updated the drivers for my laptop
From the link
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&product=5273543&a...;
Following were installed successfully but still the wifi n bluetooth are not working
1. Ralink 802.11 Wireless LAN Adapter - but problem is not resolved.
On troubleshooting the network connection - I'm able to enable / disable the wireless adaptor but not able to connect. as it says its OFF.
The wireless on/off function key is continuously showing red light and its not switching on
2. Broadcom Bluetooth Software - was installed when i connected through lan cable.
3. Also installed the latest broadcom driver frrom ftp://ftp.hp.com/pub/softpaq/sp61501-62000/sp61836.exe was installed
4. The HP Wireless Button driver sp59835 available at
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&dlc=en&softwareitem=ob-112632-1
was also installed
Funnily, at times the wifi starts working and the colour of the F12 key changes to white after the laptop has been on sleep mode. Although this does not happen everytime it wakes up from sleep mode.
Pl. give some solution

Caller ID not working with Nokia 6600?

I have a T-Mobile (US) Nokia 6600, and I can't seem to get address book to display incoming SMS or the caller ID of incoming calls. I've successfully paired the phone via bluetooth, and I can make address book dial the phone and send an sms. I can sync via iSync, use my phone as a modem, etc. etc.
But regardless of what settings I tweak, I can't seem to get Address Book to show a bezel of any kind on incoming calls - not even an 'Unknown Caller' message! Am I missing something obvious? Third party apps like BluePhoneElite work just fine, so I'm pretty sure it's something wrong with Address Book...
15" Aluminum Powerbook 1.5 GHz Mac OS X (10.4.5)

mdcdsc wrote:
My caller ID does not work with the new ap either. I don't like the new ap at all. The old one was beautiful. Now my email is very hard to see, so much that I will just use the Apple email that comes with my IPOD. The caller ID was my favorite thing with the old ap. and now it doesn't work. I have followed the instructions and turned everything on, but it just does not work.
The Caller ID issue was due to an outage. It should be resolved anytime soon. Can yu log out and log back in. Go to app settings and in notifications and turn CAller ID off and on.
On email - what do you mean 'email is very hard to see' ? I would like to pass on this feedback to the team.

Playback preferences are not working with 10.5. solution?

I downloaded iTunes 10.5 and my playback preferences are not working. For example, crossfade is screwy. Sometimes it will fade out at the end of a song, but the next song will not come in until the end, or the next song will come in WAY too early. Sound enhancement is also doing nothing. These all worked fine before the update. Has anyone else encountered this?

I too am having problems with crossfade since installing iTunes 10.5 where mostly it is just fading the end of the song.. when set to a 6 second crossfade it is just fading the last 20 seconds and still waiting till the song ends before starting the new song & i've also noted that sometimes a new song will begin when there is in excess of 20 seconds left of the previous song remianing.. hence, it sounds rediculous. i've tried uninstalling & re-installing but no fix. please help anyone..

MY WHATSAPP HAUTELOOK FACEBOOK APPLICATIONS ARE NOT WORKING WITH THE NEW UPDATE iOS 7 ITS DRIVING ME CRAZY! HOW CAN I FIX IT?

I DOWNLOADED THE NEW UPDATED VERSION FOR THE IPHONE !!!
AND MY APPLICATIONS ARE NOT WORKING AT ALL
WHENEVER I ENTER TO WHATSAPP A MESSAGE POPS UP FROM NOWHERE SAYING SOMETHING ABOOUT PUSH UP NOTIFICATION!!
AND THAT I SHOULD CONNECT IT TO ITUNES, THEN I CONNECT IT TO ITUNES AND ITUNES IS NOT LETTING ME SIGN IN WITH MY APPLE ID ITUNES IS NOT WORKING/!!!
ALSO WHENEVER I OPEN HAUTELOOK APP ON THE IPHONE IS FREEZING MY PHONE WITH THE PUSH UP NOTIFICATION WINDOW, AND I CLICK OK AND IT STILL APPEARS OVER AND OVER AGAIN
PLZ HELP ME!!!!!!!!!!!!!!!!!!!!!

If you do not have enough space, then you would have to free up more space.
You can also update via itunes on your computer.

My handoff phone call does not work with Yosemite while other apps are working

I have upgraded to Yosemite and tried the handoff with my iPhone 6. First time I tested phone call which worked. I switched off the Mac and went out. When I came back the handoff phone call didn't work anymore, while Safari, Email, etc. are still working via handoff.
Thanks for any help in advance

The iPhone calling feature is not called, "Handoff." Using the terminology incorrectly only adds to the problem. "Handoff," is the feature where apps share documents.
Both "Phone" and "Handoff" are separate features under "Continuity."
This is "Handoff":
This is "Phone" calling:
Continuity features (Scroll up and down to see all): http://www.apple.com/osx/continuity/

Why the call is not working with android?

dear community,
I have been trying to make a phone call with someone who lives overseas but it keep saying call faild ! and we even tried to send text it doesnt deliver it at all.
but when i called my friend who is in same city it worked well
so what is the problem?
why its not working when we want to make a call with someone abroad?
I need a solution as soon as possible please
we both tried to update,delete, re-install the app its just never work T^T
Solved!
Go to Solution.

When trying to call somebody abroad make sure you have chosen the correct country or reigien code upon opening the dial pad within skype we have the same phone's appart from mine is a s3 so this process will be exactly how I say as I was saying when. The skype dial pad is open just where the numbers display at the top of the screen right below you will see white writing chat the area code to the country you are trying to call.
I hope this help any more problems or if this persists cone back and I'll see if I can help some more if not then perhaps try customer services on the live chat link via the website
Adam.k

Re: Call forwarding not working with subscription

I just noticed the same problem today too. Calls are going to voicemail instead of ringing to my forwarded phone (I have a US/CA unlimited subscription)
and I do use Skype on both Win7 computer and Android phone.
note that the help on the feature clearly still states that it should work even if you're offline (my red bolding below, from http://www.skype.com/en/features/call-forwarding/?intsrc=client-_-windows-_-6.11-_-go-callforwarding...
How it works:
Somebody calls you on Skype, but you’re unable to answer or you’re offline.
The call gets forwarded to a mobile or landline of your choice.
You pick up and there’s no extra charge for the person calling.

I just noticed the same problem today too. Calls are going to voicemail instead of ringing to my forwarded phone (I have a US/CA unlimited subscription)
and I do use Skype on both Win7 computer and Android phone.
note that the help on the feature clearly still states that it should work even if you're offline (my red bolding below, from http://www.skype.com/en/features/call-forwarding/?intsrc=client-_-windows-_-6.11-_-go-callforwarding...
How it works:
Somebody calls you on Skype, but you’re unable to answer or you’re offline.
The call gets forwarded to a mobile or landline of your choice.
You pick up and there’s no extra charge for the person calling.

Cisco CP-78XX SIP Phone Pickup Not Work on CME

Hi,
I configured some SIP phones (CP-7821, CP-7841) with pickup function. Is it the Pickup / GPickup soft keys not function as the SIP phone? If yes, then I can use the FAC to access that? And I tried the FAC std. / custom as the pickup / gpickup .. both not work ... I don't know how to use the FAC on CME? As the FAC std., if I pickup local, that I should press (**3) > call?
Ref.:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm/cmecover.html#45535
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm/cmefacs.html#30064
This is the configuration:
CME-SIP-Phone#sh run
Building configuration...
Current configuration : 5413 bytes
! Last configuration change at 11:06:12 UTC Fri Nov 28 2014 by mtlops
version 15.4
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service sequence-numbers
hostname CME-SIP-Phone
boot-start-marker
boot system flash:c2900-universalk9-mz.SPA.154-2.T1.bin
boot-end-marker
! card type command needed for slot/vwic-slot 0/0
enable secret 5 $XXXXXXXXXXXXXXXXXXXXXXXX
aaa new-model
aaa authentication login default local
aaa authorization console
aaa authorization exec default local
aaa session-id common
ip cef
no ipv6 cef
multilink bundle-name authenticated
stcapp feature access-code
voice-card 0
dspfarm
dsp services dspfarm
voice service pots
voice service voip
ip address trusted list
ipv4 10.118.0.0 255.255.255.0
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
no supplementary-service h225-notify cid-update
redirect ip2ip
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
h323
no h225 timeout keepalive
call preserve
sip
bind control source-interface GigabitEthernet0/0
bind media source-interface GigabitEthernet0/0
registrar server expires max 600 min 60
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g711alaw
codec preference 3 g729r8
voice class h323 1
h225 timeout tcp establish 3
call preserve
voice class custom-cptone ABC-Company
dualtone disconnect
frequency 425
cadence 500 500
voice register pool-type 7821
description Cisco IP Phone 7821
reference-pooltype 6921
voice register pool-type 7841
description Cisco IP Phone 7841
reference-pooltype 6941
voice register global
mode cme
source-address 10.118.0.10 port 5060
timeouts interdigit 2
max-dn 200
max-pool 100
authenticate register
authenticate realm all
timezone 42
time-format 24
date-format D/M/Y
mwi stutter
mwi reg-e164
voicemail 5000
call-feature-uri pickup http://10.118.0.10/pickup
call-feature-uri gpickup http://10.118.0.10/gpickup
tftp-path flash:
file text
create profile sync 0001170446349417
ntp-server 10.118.0.10 mode unicast
ip qos dscp af11 media
ip qos dscp cs2 signal
ip qos dscp af43 video
ip qos dscp 25 service
camera
video
voice register dn 2
number 1000
pickup-call any-group
pickup-group 1
name BB Leung
label BB Leung
voice register dn 3
number 1001
pickup-call any-group
pickup-group 1
name CC Chan
label CC Chan
voice register dn 4
number 1002
pickup-call any-group
pickup-group 1
name DD Leung
label DD Leung
voice register dn 50
mwi
voice register template 1
softkeys hold Newcall Resume
softkeys idle Newcall Redial Gpickup Pickup Cfwdall DND
softkeys seized Cfwdall Endcall Redial
softkeys connected Confrn Endcall Hold Trnsfer
voice register pool 1
busy-trigger-per-button 1
id mac A8XX.XXXX.XXXX
type 7841
number 1 dn 2
template 1
dtmf-relay sip-notify
username 1001 password 112233
codec g711ulaw
no vad
voice register pool 2
busy-trigger-per-button 1
id mac 50XX.XXXX.XXXX
type 7841
number 1 dn 3
template 1
dtmf-relay sip-notify
username 1002 password 112233
codec g711ulaw
no vad
voice register pool 3
busy-trigger-per-button 1
id mac 00XX.XXXX.XXXX
type 7821
number 1 dn 4
template 1
dtmf-relay sip-notify
username 1003 password 112233
codec g711ulaw
no vad
license udi pid CISCO2921/K9 sn FHK1407F25D
license accept end user agreement
license boot c2900 technology-package uck9
hw-module pvdm 0/0
hw-module sm 1
username mtlops privilege 15 secret 5 $1$0qqx$1WGdfRW.flJrwmY7k8eUy0
redundancy
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
ip address 10.118.0.10 255.255.255.0
duplex auto
speed auto
interface GigabitEthernet0/1
no ip address
shutdown
duplex auto
speed auto
interface GigabitEthernet0/2
no ip address
shutdown
duplex auto
speed auto
interface SM1/0
no ip address
shutdown
service-module fail-open
interface SM1/1
no ip address
interface Vlan1
no ip address
ip forward-protocol nd
no ip http server
no ip http secure-server
ip route 0.0.0.0 0.0.0.0 10.118.0.1
control-plane
mgcp behavior rsip-range tgcp-only
mgcp behavior comedia-role none
mgcp behavior comedia-check-media-src disable
mgcp behavior comedia-sdp-force disable
mgcp profile default
dspfarm profile 1 conference
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
codec g729r8
codec g729br8
maximum sessions 7
associate application SCCP
shutdown
gatekeeper
shutdown
telephony-service
max-conferences 8 gain -6
transfer-system full-consult
fac standard
line con 0
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line 67
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
stopbits 1
line vty 0 4
transport input all
scheduler allocate 20000 1000
end
CME-SIP-Phone#sh telephony-service fac
telephony-service fac standard
callfwd all **1
callfwd cancel **2
pickup local **3
pickup group **4
pickup direct **5
park **6
dnd **7
redial **8
voicemail **9
ephone-hunt join *3
ephone-hunt cancel #3
ephone-hunt hlog *4
ephone-hunt hlog-phone *5
trnsfvm *6
dpark-retrieval *0
cancel call waiting *1

VPN is not Configured prints on all phones now with the built-in VPN client if VPN isn't configured. That's normal and is just cosmetic. That should not be causing your registration issues.

Youtube and BBC iPlayer are not working with Flash

Hi there Guys,
When I started this search I had a full head of hair :( I have read hundreds and houndreds of webpages talking about Flash and FireFox and at this point I just can't get them to work together.
I am very reluctant to change my browser as to be honest with you I love Firefox but at this point I am in desperation. I have read webpages which they remove this plug-in and that plug-in, change databases, remove this file and delete that file, called this old and remove that. And still nothing happens it just does not work.
The version of Firefox I am running 35.0.1
the version of Flash I am writing is 16.0.0.305
but every time I try to visit YouTube and/or the BBC's website nothing works HELP!!!!
I would really just do not know what to do.
Thank you for reading and I hope somebody can help.
John

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Create a new profile as a test to check if your current profile is causing the problem.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over problems.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Incoming sip calls are not working but outgoing is working with cme

Similar Messages

Maybe you are looking for