Incoming skype calls are not ringing on my iphone
incoming skype calls are not ringing on my iphone. It used to work but now doesn't. I can't find anywhere in the settings to fix this.
Any suggestions?
Solved!
Go to Solution.
Ever since iOS5 the ringer and display does not work. No notifications.
I live in a gated community and the gate is assigned to my Skype number. I also have clients who call me and they aren't getting through.
If I have to purchase a land line, I will sue in small claims for the cost of the service and loss of service.
Do not waste anyone's time with cookie-cutter answers.
My Skype isn't ringing nor shows up on the screen ever since iOS5. You should have been working on this with the developer packs.
I've deleted and reinstalled 3x. It is running. Volume is correct.
This is outrageous as I pay for Skype and am thinking of canceling and demanding a full refund.
You are pushing things towards class litigation here in the US. There is no excuse.
Microsoft now owns Skype. They are a US corporation and are liable.
iPhone4
iOS5
Skype 3.5.117(3.5.0.117)
Notifications: Sound ON Alerts ON
Volume is at 100%
Ringer is at 100%
Similar Messages
-
Incoming calls are not ringing or activating the "...
As stated in the subject box. Incoming calls do not ring. Also the text box indicating incoming calls does not show up on the screen either. The only way I know a call has come in is when it goes to voice mail.
Ever since iOS5 the ringer and display does not work. No notifications.
I live in a gated community and the gate is assigned to my Skype number. I also have clients who call me and they aren't getting through.
If I have to purchase a land line, I will sue in small claims for the cost of the service and loss of service.
Do not waste anyone's time with cookie-cutter answers.
My Skype isn't ringing nor shows up on the screen ever since iOS5. You should have been working on this with the developer packs.
I've deleted and reinstalled 3x. It is running. Volume is correct.
This is outrageous as I pay for Skype and am thinking of canceling and demanding a full refund.
You are pushing things towards class litigation here in the US. There is no excuse.
Microsoft now owns Skype. They are a US corporation and are liable.
iPhone4
iOS5
Skype 3.5.117(3.5.0.117)
Notifications: Sound ON Alerts ON
Volume is at 100%
Ringer is at 100% -
Incoming sip calls are not working but outgoing is working with cme
I have CME setup with voip.ms on my 2800 router, my outgoing calls are working but my incoming calls are not. Below is my config, please let me know if it is something with my config:
voice translation-rule 3
rule 1 /^9142281\(...\)$/ /\1/
voice translation-profile INCOMING_CALL_1
translate called 3
dial-peer voice 1 voip
translation-profile incoming INCOMING_CALL_1
session protocol sipv2
session target sip-server
incoming called-number .%
voice-class codec 1
dtmf-relay rtp-nte
no vadI made the change, but I am getting no output from debug voip ccapi inout. What does concern me from debug ccsip messages is:
Aug 31 12:42:04.195: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 400 Bad Request - 'Invalid Host'
Via: SIP/2.0/UDP 107.6.67.238:5060;branch=z9hG4bK000d3c36;rport
From: "+19144410197" <sip:[email protected]>;tag=as7439b9c1
To: <sip:[email protected]:1061>;tag=829C8-2532
Date: Sun, 31 Aug 2014 12:42:04 GMT
Call-ID: [email protected]:5060
CSeq: 102 INVITE
Allow-Events: telephone-event
Reason: Q.850;cause=100
Server: Cisco-SIPGateway/IOS-12.x
Content-Length: 0
I also am getting this:
voicertr2#debug ccsip error
SIP Call error tracing is enabled
voicertr2#
Aug 31 12:45:07.359: //-1/xxxxxxxxxxxx/SIP/Error/sipSPI_validate_own_ip_addr: ReqLine IP addr does not match with host IP addr
Aug 31 12:45:07.359: //-1/78AE76E98009/SIP/Error/sact_idle_new_message_invite: Invalid URL in incoming INVITE -
Incoming FaceTime calls do not ring on MacBook Pro.
I can call other people using FaceTime, but when they try to call me I don't get their call. Sometimes we're on the phone while trying to connect via FaceTime and I can hear their outgoing FaceTime call ringing, but it is not ringing on my computer. They get the message that I am unavailable in FaceTime, even though it's open and I'm there waiting. And their call doesn't show up in my notifications either. I've checked settings, sound, made sure everything is enabled. I can't figure out why I'm not getting their FaceTime calls. I've looked at all the troubleshooting pages and other community questions with same problem. Most of them are using iPad so those suggestions aren't relevant for the MacBook Pro. Thanks for any help.
"We" don't ahve to do anything - mine's working fine
Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray before doing the reset.
Try deleting and reinstalling the app. -
Outgoing calls are not going on my iphone 3gs....
i am not able to make any outgoin calls on my iphone 3gs. I am getting incoming calls. I am in chennai can anyone tell me an authosized service centre.
it is all fine with the sim card. i have tried a different service provided sim also. while talking on the fone suddenly the iphone gets restarted & cut...
-
Incoming calls are not heard, only vibrate. I have reset the phone back to factory settings and still do not get any ring tone sounds for any incoming calls. The phone only vibrates. I have checked all setting including volume and do not get any sounds from the phone on incoming calls.
Check the Mute / Silent Switch on the side of the phone...
iPhone User Guide -
My calls are not going to voice mail, the phone just rings any suggestions?
Voice mail is installed, but incoming calls are not goint to voice mail.. What can I do?
Check with your Phone Carrier that Voice Mail is Setup and Activated...
-
My Skype number is not ringing
My skype number is not ringing or answering when it called
it worked great for a few weeksWe need more information. Do you have a subscription that covers mobiles such as a US subscription? If not you will need skype credit to forward to your mobile. Have you set your privacy settings to allow anyone to call. Like this.
First check that your privacy settings are set to ''Allow calls from anyone''.
Then change them to "Allow SkypeIn calls from Only people from my Contacts List".
Save and wait for 5 minutes.
Log out from your Skype account and log back in.
Change settings back to "Allow calls from Anyone".
Save and wait for 5 minutes.
Log out from your Skype account and log back in.
I hope this sloves the problem.
If you found a post useful, please give Kudos. If it helped to fix your issue, mark it as a solution to help others.
Thank You! -
Calls are not getting thru in Cisco voice GW for a particular Number
Cisco gateway is connecte to a PBX with an Qsig interface, for a particualr destination number the calls are not gettin estabilished.
the output of the Q931 debug :
Aug 16 16:17:46.145: ISDN Se0/0/0:23 Q931: RX <- SETUP pd = 8 callref = 0x7E05
Bearer Capability i = 0x8090A2
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98396
Exclusive, Channel 22
Facility i = 0x9FAA068001008201008B0100A16E0202070102011530650201010A010
1800101A111A00FA50D0A010212083530303035393938A211A00FA50D0A010212083530303035393
938A312801054454C45434F4D20574F524B524F4F4DA412801054454C45434F4D20574F524B524F4
F4DA50C06062B0C02FF373730020500
Facility i = 0x9FAA068001008201008B0100A11D0202010002010080144E455453202
F204C4F4E472044495354414E4345
Calling Party Number i = 0x2183, '8168911010'
Plan:ISDN, Type:National
Called Party Number i = 0x89, '18553808521'
Plan:Private, Type:Unknown
Sending Complete
Aug 16 16:17:46.149: ISDN Se0/0/0:23 Q931: TX -> CALL_PROC pd = 8 callref = 0xF
E05
Channel ID i = 0xA98396
Exclusive, Channel 22
Aug 16 16:17:55.709: ISDN Se0/0/0:23 Q931: TX -> DISCONNECT pd = 8 callref = 0x
FE05
Cause i = 0x80BF - Service/option not available, unspecified
Aug 16 16:17:55.741: ISDN Se0/0/0:23 Q931: RX <- RELEASE pd = 8 callref = 0x7E0
5
Aug 16 16:17:55.741: ISDN Se0/0/0:23 Q931: TX -> RELEASE_COMP pd = 8 callref =
0xFE05
The Qsig and dial-peer configration :
interface Serial0/0/0:23
no ip address
encapsulation hdlc
isdn switch-type primary-qsig
isdn overlap-receiving
isdn incoming-voice voice
isdn send-alerting
no cdp enable
dial-peer voice 1 voip
description To CBTS GK
destination-pattern +1T
signaling forward rawmsg
session protocol sipv2
session target ipv4:10.9.5.10
session transport tcp
voice-class codec 1
dtmf-relay rtp-nte
no vad
interface Serial0/0/0:23
no ip address
encapsulation hdlc
isdn switch-type primary-qsig
isdn overlap-receiving
isdn incoming-voice voice
isdn send-alerting
no cdp enable
dial-peer voice 1 voip
description To CBTS GK
destination-pattern +1T
signaling forward rawmsg
session protocol sipv2
session target ipv4:10.9.5.10
session transport tcp
voice-class codec 1
dtmf-relay rtp-nte
no vadHi Raj,
My name is Edson Pineiro, I understand that your problem description is in regards to failed incoming calls from a qsig trunk.
According to the received q931 setup message I can see the called party number is 18553808521 and as so the gateway should route the dnis based on the best match in destination-pattern. My first suggestion would be to ensure your outgoing dial-peers has a matching destination-pattern that matches the dialed number, for example:
dial-peer voice 1 voip
destination-pattern 1T
The T is a wild card for any digit any length
Or you can be very specific.
dial-peer voice 1 voip
destinaton-pattern 18553808521
The next suggestion would be to ensure that your incoming pots dial-peers contains 'direct-inward dial'. This is so that you don't receive secondary dial tone when dialing in, which I don't think is happening here.
Another suggestion would be to remove 'isdn overlap-receiving' from interface serial 0/0/0:23. Reason being is that the DNIS received is enbloc and not overlapping. You can clearly see that the complete e164 number is received within the setup and no further digits are needed.
But overall the disconnect cause code is 0x80BF the 80 portion is related to the source of the disconnect which is the router and BF "Service/option not available, unspecified" which is described as:
The network or remote equipment cannot provide the service option that the user requests, due to an unspecified reason. A subscription problem can cause this issue.
Any ways seems like the router does not support the protocol or type of message included in the Setup. After decoding one of the facility message:
Facility i = 0x9FAA068001008201008B0100A16E0202070102011530650201010A010
1800101A111A00FA50D0A010212083530303035393938A211A00FA50D0A010212083530303035393
938A312801054454C45434F4D20574F524B524F4F4DA412801054454C45434F4D20574F524B524F4
F4DA50C06062B0C02FF373730020500
decode -->
Facility IE first byte (protocol profile): 0x9f(Network Extentions), depends on Network Protocol Profile
**Note:
**0x91/0x9f both be used by older qsig spec, including:
**ISO 11582:1995, ETSI 300 239:1993/1995
**newer qsig spec use 0x9f only, including:
**ISO 11582:1995/Cor.1:1999, ECMA 165(4th), ETSI 300 239:2003
**see CSCeb58118 for CCM compatibility issue
NetworkFacilityExtension ::= {
sourceEntity: 0
destinationEntity: 0
NetworkProtocolProfile not present
APDU is a ROSE
0
DivertingLegInformation2Invoke ::= {
invokeID: 1793
operationValue: 21
argument: DivertingLegInformation2Arg ::= {
diversionCounter: 1
diversionReason: 1
originalDiversionReason: 1
divertingNr: PrivatePartyNumber ::= {
privateTypeOfNumber: 2
privateNumberDigits: 50005998
originalCalledNr: PrivatePartyNumber ::= {
privateTypeOfNumber: 2
privateNumberDigits: 50005998
redirectingName: 54 45 4C 45 43 4F 4D 20 57 4F 52 4B 52 4F 4F 4D
originalCalledName: 54 45 4C 45 43 4F 4D 20 57 4F 52 4B 52 4F 4F 4D
Looks like this is a redirected call (call forward or transfer), the redireted number is "50005998" and the other end of the PRI maybe attempting to do either a 2 B channel transfer or B channel optimization, which is not supported certain gateways or needs the use of a tcl scripts. Any ways is it possible to confirm if such features are enabled on the other end of the qsig trunk? and what the number 50005998 is assigned too. This may warrant a TAC case.
However please ensure your carry through the first three configuration changes before looking at the possible bad facility message.
Here are some good documents on ISDN, IOS dial-peers and call legs:
Understanding debug isdn q931 Disconnect Cause Codes
http://www.cisco.com/en/US/tech/tk801/tk379/technologies_tech_note09186a008012e95f.shtml
Configuring Telephony Call-Redirect Features
Two B-Channel Transfer
http://www.cisco.com/en/US/docs/ios/voice/ivr/pre12.3_14_t/configuration/guide/ivrapp.pdf
Understanding Dial Peers and Call Legs on Cisco IOS Platforms
http://www.cisco.com/en/US/partner/tech/tk652/tk90/technologies_tech_note09186a008010ae1c.shtml
Understanding Direct-Inward-Dial (DID) on IOS Voice Digital (T1/E1) Interfaces
http://www.cisco.com/en/US/partner/tech/tk652/tk653/technologies_tech_note09186a00801142f8.shtml
Understanding Inbound and Outbound Dial Peers Matching on IOS Platforms
http://www.cisco.com/en/US/partner/tech/tk652/tk90/technologies_tech_note09186a008010fed1.shtml#prereq
Voice Translation Rules
http://www.cisco.com/en/US/partner/tech/tk652/tk90/technologies_tech_note09186a0080325e8e.shtml
Let me know how you go.
Thanks again for asking the tuff questions.
Cheers
Edson -
External PSTN calls are not making it to CUE voicemail?
External PSTN calls are not being forwarded to my Unity Express Voicemail. Internall calling and forwarding to Voicemail is working like a charm. However, calls from the outside just busyout after so many rings and never make it to voicemail.
Can some one help point me in the right direction. I think it might be as simple as dial-peer problem.
Thanks in advance,
CurtI'm assuming this is CME-integrated. Basically, if you have a PRI connection, the easiest thing to do is to do a 'debug isdn q931' and check out the called number. Or if you have an FXO connection to the PSTN, then you've got some kind of 'connection plar' under the voice port to give you the called number. Basically the called number must match a destination pattern under a voip dial-peer pointing to CUE (you can use 'debug ccsip message' and look for an INVITE message to see where it's going to). Next, it has to match a trigger ('show ccn trigger' in the CUE CLI) to envoke a particular application, such as voicemail. If you have trouble, what we'll need to see is the exact called number (either via the isdn q931 debug or connection plar configuration statement) and the configuration (show run) from the CME and the CUE.
Lastly, take a look at the following notice:
http://www.cisco.com/en/US/partner/products/sw/voicesw/ps5520/products_field_notice09186a008023cfe2.shtml
which might apply to your situation. -
I updated my Iphone4S this week to the newest IOS 7.1 and now everyone who calls me says the calls are not clear, muffled. Is there something I can do to clear this? 4 people in 4 different states that called me all said the same thing.
Settings > General > Reset > Reset Network Settings
Contact the carrier to troubleshoot. -
Proxy calls are not permitted on IS
Hello,
I have implemented a scenerio between SAP AR -
XI --- SAP FCSM.
Now SAP and Xi are on same server but clients are different.
For SAP client is 110 for XI client is 100.
In sxmb_adm we have set SAP as application server and Xi as IS.
While testing this secerio i got a error as Proxy calls are not permitted on sender or receiver side on the IS (client)
If i check in sxmb_moni i found 2 messages one is sucessful and other one with error shown above.
can anyone help me out in this.
regards,
VikrantHi Vikrant,
Need to be configure the Business Systems as the Local Integration Engine
In the respective application client, choose Exchange Infrastructure -> Administration -> Integration Engine u2013 Administration (SXMB_ADM) in the user menu.
2.Choose Integration Engine Configuration.
3. In the menu bar, choose Edit -> Change Global Configuration Data.
4.In the Global Configuration Data frame, choose Application System as the role of the business system.
5.In the Corresponding Integ. Server field, specify the HTTP destination that the business system uses to address the central Integration Server. Use the following syntax: dest://<HTTP Destination>
Specify the HTTP destination of the Integration Server that you created during the technical configuration of SAP Exchange Infrastructure.
regards
Ashwin
Edited by: ashwin dhakne on Mar 6, 2009 5:26 PM -
Missed calls and placed calls are not saving in 7942 phone
HI
i am facing some issue in telephone directory, in my phone missed calls and placed calls are not saving. i am using cisco call manager and 7942 phone. please help me in this issue.
Thanks
ShijoHi Shijo,
Is this affecting only one 7942 IP phone or all of them? if this is affecting all then you may try ta firmware upgrade. If this is only affecting one of them then you can compare the settings of this phone with the working ones or try setting the phone to factory defaults.
HTH
Manish -
My previous calls are not displaying in the recent call section. How can I fix this?
There are some recovery programs out there if you google them - many with free trials. I haven't tried them so I have no opinion.Read any professional tech and user reviews you can find before you try one. I have read here in the past that some have worked for people who have posted here.
To help in the future, have you considered using Jump Desktop - Remote Desktop? I know it won't solve the problem you're dealing with now (unless notes were taken on your computer.) It's in the app store. It's the #1 paid app in the business category and the reviews are great. It allows you to see anything that's on your computer on your ipad. If you take your notes on your ipad then you might want to email them to yourself, put them on Word in your computer, for example, and then if you need them in class, you remotely connect your ipad to your computer and you will see your notes. This way you won't have to rely so much on the cloud. The explanation would be too long here, but you might want to take a look at it. You can use the free trial on jumpdesk.com and then if it works for you, buy it in the app store.
Meanwhile, it's hours since you sent this post. Hopefully others who can help solve your problem who are on this forum now can help you. I hope you get your notes back. Don't give up too quickly.
Hope this helps. -
Video calls are not secure - not showing lock icon
Hi guys,
Calls between 9971/8945. Video calls are not getting secured.
video calls are not secure - not showing lock icon.
However audio calls are secure
CUCM Version : 8.6.2.22900-9
1 pub and 2 sub
Secured cluster : mixed mode
9971 : sip9971.9-3-1-33 - running version - same issue
9971 : sip9971.9-2-4-19 - old version - same issue
8945 : sccp8941-8945.9-3-2-11 – Running version.
Please suggest.
thx
AshishWould you be able to try 9.3(2) firmware or later? I checked with 9.4(1) and I see a lock icon when placing a video call on my 9971. According to the new and changed information 9.3(2) added additional support for when to display the lock icon,
http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/9971_9951_8961/firmware/932/release_notes/P567_BK_RD4ECA70_00_rn-9_3_2-8961-9951-9971_chapter_00.html#P567_RF_AB412E9F_00.
Maybe you are looking for
-
I have a FCP event and project with all accompanying media saved on a harddrive. I am now attempting to open the files on another computer that also has FCP X. I cannot figure out how to get it to open.
-
Onlocation ver 4 & hvx200 not smooth video unless 480??????
Onlocation looks so cool but when I use 1080 and look at the screen and playback it jumps and looks jittery what can I do to have a smooth video capture? When in 480 it looks good but I can see the less detail then In 1080 great picture but it jumps
-
Help cannot install anything, installer keeps crashing.
I have a G4 12inch powerbook 1.5 running the latest Tiger operating system. I cannot install anything that uses pkg, such as Safari beta or iWork 08 trial. I double click the pkg icon and nothing happens. When I go check console this is what I see. A
-
Hi This script is creating log file in the ext directory. How to avoid it. Can you specify the syntex. Thanks alot. Bhaskar CREATE TABLE datfiles_list (file_name varchar2(255)) ORGANIZATION EXTERNAL (TYPE ORACLE_LOADER DEFAULT DIRECTORY ext_dir ACCES
-
Registering a Adobe Illustrator CS5 upgrade
Hi We are a reseller that clears stock very a very large and reputable UK company. vitually all software is received in sealed boxes but we have an Adobe Illustrator CS5 updrade pack that has been opened I am concerned for our repuutation not to sell