Incoming Video freezes after a few minutes Using S...

I just installed the Sony BDP-S780 Blu-ray and Sony CMU-BR100 Webcam, skype is working, however the incoming video freezes after a few minutes. The caller on the other side clicks off the video and then back on, it works again but only for a few minutes. Is there a fix for this or am I doing something wrong.

Similar Messages

HT204291 Since downloading 8.1.3 onto my iPad, video streaming through my Apple TV freezes after a few minutes whilst audio continues as usual. Anyone experienced this and if so, is there a fix?

Since downloading 8.1.3 onto my iPad, video streaming through my Apple TV freezes after a few minutes whilst audio continues as usual. Anyone experienced this and if so, is there a fix?

8.2 is out...perhaps that will address your problem.
Barry

Freezing after a few minutes of screen sharing?

Hello, when setting up a screen sharing session on mountain lion with a lion laptop (the ml is being controlled by the lion laptop), the 10.8 laptop freezes after a few minutes of the session. The mouse cursor still works locally, however no clicking or keyboard input is accepted. The remote controller also loses the connection, and a hard reboot is the only thing to bring the computer back.
Any ideas?
Thanks,
Dan

Yes, that is exactly what I am experiencing.
I followed instructions and found that computer was set to log out after 120 minutes. I don't know if that is the default setting or not, but I know I never set it that way myself, didn't even know the option was there.
I have always had the computer set to start screensaver after 15 minutes, display sleep after 30 minutes, and computer sleep after 1 hour. The computer never logged me out with those settings until a couple of days ago when this problem started. I had changed computer sleep to never so I could see if remote desktop on my ipad would be able to connect to the imac, and that is when the problem started.
I am trying setting screensaver to 10 minutes, display sleep to 15 minutes, and computer sleep to never, and see if that solves the problem. I also unchecked the box to log out after 120 minutes.
Thanks for your help, I appreciate it.
Lewis

IBook 500 GHz freezes after a few minutes

I have had a 500Mhz iBook G3 dual USB a couple of years and suddenly the screen went black. After searching online I found some repairs by either heating up the chip and causing the solder to re-melt or put an object on top of the chip to keep it pressed into place. I tried the latter and it started up fine. Now it will freeze completely after a few minutes. Once I put a cold pack over the area where the chip is and it stayed working fine for about an hour then it did freeze up again. Could it possibly be the material I used is causing excessive heat build up on the chip or logic board??? I may have over done the amount of material which I believe is a piece of old floor tile. I bought this iBook cheap and use it on my travels at hotels so I don't want to spend much money fixing it. Just wondering if I used another material on top of this chip if that would stop the freezing up.
Also, when I first "tested" this problem by squeezing the iBook in the area of the chip the display would come on, but if I squeezed a bit hard it sounded like the drive made a loud noise. Could the pressure affect the drive performance?

I'm wondering how stable the object you placed in there was/is? Maybe it has broken down and is no longer working properly.
Suggested by John Sawyer in the Apple Discussions iBook G3 (Dual USB) Displays Forum:
[Y]ou can often fix this yourself by removing the iBook's bottom housing, and placing a shim of any sort, about 1mm to 1.5mm thick, onto the raised square on the bottom shield. I use a Scotch mounting square--you can get them in hardware stores and many grocery stores. When you reinstall the bottom case, it will press against this shim, which will press against the graphics chip, and may allow the chip to come into better contact with the logic board.
John Sawyer
CJS Macintosh Repair
Instructions for removing the lower case:
iFixit.com
Now, as you may have experienced, all shims are not created equal, and it can matter what type of material you use.
when I first "tested" this problem by squeezing the iBook in the area of the chip the display would come on, but if I squeezed a bit hard it sounded like the drive made a loud noise. Could the pressure affect the drive performance?
Yes, but if you had too much pressure there, the hard drive probably would make grinding noises, letting you know that something was amiss with it. If you squeezed too hard initially and heard those noises, you know what I mean.

Freezing after a few minutes or open more than 2 tabs beta10/12

After beta 10 firefox freezes up after a few minutes and have to ctrl alt delete to close it, i noticed the memory drops from 120,000 to 40,000+ only seemed to happen after beta 10, firefox 3.6 works fine
windos7x64 beta12

Michael Lafferty wrote:
The symptoms you describe with and ALS model are indicative of a power supply failure, and not an issue with electrolytic capacitors on the logic board.
I was speaking about the components in the power supply, although the Logic Board components are also in visually good condition.
My concern is; replacing the PS may place greater pressure on the components of the Logic Board, which are obviously of the same age. Precipitating a similar failure in the LB at an early stage...
£100 for a power supply is one thing, then the probability of £200+ for a LB replacement is quite another. £300+ is not a viable repair for a 5 year old iMac in my opinion.
A dealer or service provider can replace the power supply, which should completely address your issue EXCEPT to the extent that repeated, abnormal shutdowns have damaged your drive directory. Using Disk Utility as a first pass may address any such concerns. More extensive directory damage will require a utility like Disk Warrior.
Quite capable of replacing PS my self, not too worried about the warranty aspect now!
Agreed, repeated shut downs may have messed the directory. The contents have been duplicated throughout the life of the machine, so backup is not an issue, a reformat and zero of the drive would be a natural progression from replacing the PS, if we go that route.
The part required for replacement in an iMac 17 inch (ALS) model is the 661-3627. In the 20 inch (ALS) model, it is a 661-3625.
Thank you for your observations and help, also for the confirmation of the part #. There are some new on UK eBay right now @ £80 - £100.
Message was edited by: Epochmaker due to omissions in the text.

Video freezes after a few seconds

This is actually a continuation of a post I made almost a year and a half ago, trying to get video chat going so my mom can visit with her grandkids. The thread has been archived, so I can't post there but in case it helps here's the address:
http://discussions.apple.com/thread.jspa?threadID=1658017&tstart=0
We are both running Tiger 10.4.11 and iChat AV 3.1.9 (v446), although she's on a 1.25 GHz G4 with 1.5 GB of RAM, and I'm on a 1.8 GHz iMac G5 with 1 GB of RAM. We both have the exact same videocamera, Canon Elura 70, attached via Firewire. Both computers recognize the cameras fine, no problems there.
Anyway, my sister and I have tried 1,000 different things but nothing works. I can always see her but not hear her, and the connection is dropped after a few seconds, saying there's insufficient bandwidth to maintain the conference. She can't see me at all, but she can hear me. The chat usually ends with error -20 and sometimes -22. For instance, here's the log from our try today:
*2010-01-29 11:49:30 -0600: No data has been received for the last 10 seconds.*
*Audio channel info: local machine using 10.0.1.3:16386, expecting remote machine to send to 97.83.147.78:56754*
*Video channel info: local machine using 10.0.1.3:16384, expecting remote machine to send to 97.83.147.78:56752*
*Chat ended with error -20*
*Chat ended with error -20*
*Chat ended with error -22*
*Chat ended with error -22*
The thing is, we can video conference successfully (video and audio) with each other from separate rooms if we're both at her house, as well as from separate rooms when we're both at mine. However, when we're each at our own home, it won't work. She's got a download speed of 8.5, and mine is 8.3. Her upload speed is 1.01 and mine is 1.74.
I am connected through a router - SMC Barricade (SMC7004VBR), and a WebStar modem. We've both taken the tape out of our camera, set our bandwidth limit in iChat to none. System Preferences > Quicktime > Streaming is at 1.5Mbps. I've learned how to access my router settings but I don't see a DoS or SPI setting. It shows firewall features are disabled.
We've also tried to connect with Skype instead, and I was able to see my sister without it freezing. But she couldn't see me, so it still didn't fully work.
I'm totally at a loss. Any ideas?
Edit: Forgot to say her modem is an Ambit U10C018.
Message was edited by: laburke

Wow, thank you so much for the detailed response. I'm actually feeling a little bit of hope that we might get this figured out eventually!
iChat 3.x at both ends.
Can Login and show Buddy Lists
Can Send Visible Invites.
Can Start Video Chat but something says the Bandwidth is then not good enough.
Error Message.
All true, except she has never been able to see me unless we're both in the same my house.
The Intranet /LAN setting in Tiger for iChat 3 also returns Odd figures to
iChat so we have long said set it to 1.5Mbps which your last post says it is.
I take it you must have restarted iChat f not the Mac(s) since you changed
this setting ? (Just covering all bases)
Right.
Have you changed the range the SMC uses to miss the range the modem is using ?
The only change I've made to anything recently is in iChat prefs: Under Accounts - Server settings, I changed the top port to 443 because regular iChat kept disconnecting at odd times and I read somewhere that it might help. But we had this AV problem long before that, and after.
I see the SMC cannot Forward enough ports for iChat but Can do UPnP
(Universal Plug and Play)
Is it set to do UPnP ?
I don't see anything that says UPnP. It says:
GATEWAY
IP Address: 192.168.2.1
Subnet Mask: 255.255.255.0
DHCP Server: Enabled
Firewall: Disabled
On the Port Forward site there are two WebSTARs listed under
Scientic Atlanta
DO you have either of these ?
No, it is a DPC2100.
I could also do with seeing an old log of an Error 20 log.
They are stored in You Home Folder/Library/Logs/iChatConnectionErrors
Can you post the bits down and only down to the line that starts "Binary Images for iChat"
Pasted at bottom of this post.
Can you tell me if there is a Wifi and Ethernet connection to the Router ? (at > the same time )
My husband's PC is connected to the router via Ethernet. The only other things connected to it are the modem and my Airport Express so I can get online with my Macs. (I used to have the iMac connected by Ethernet before I realized I had an Airport card. Duh.)
Thanks so much for your patience and help!
Here's the chat log:
Date/Time: 2010-01-29 14:05:49.036 -0600
OS Version: 10.4.11 (Build 8S165)
Report Version: 4
iChat Connection Log:
AVChat started with ID 2853609893.
0x63bb350: State change from AVChatNoState to AVChatStateWaiting.
Laura Macburke2: State change from AVChatNoState to AVChatStateInvited.
0x63bb350: State change from AVChatStateWaiting to AVChatStateConnecting.
Laura Macburke2: State change from AVChatStateInvited to AVChatStateConnecting.
0x63bb350: State change from AVChatStateConnecting to AVChatStateConnected.
Laura Macburke2: State change from AVChatStateConnecting to AVChatStateConnected.
0x63bb350: State change from AVChatStateConnected to AVChatStateEnded.
2010-01-29 14:05:45 -0600: Participant 0x63bb350: VC connection failed.
Chat ended with error -20
Laura Macburke2: State change from AVChatStateConnected to AVChatStateEnded.
Chat ended with error -20
Video Conference Error Report:
34.059291 @SIP/Transport.c:121 type=4 (00000000/0)
[NOTIFY sip:[email protected]:56754 SIP/2.0
Via: SIP/2.0/UDP uen0.0;branch=z9hG4bK6ddeb2cf73f6ce49
Max-Forwards: 70
To: "Laura Macburke2" <sip:[email protected]:56754>;tag=1831371757
From: "u0" <sip:[email protected]>;tag=385103684
Call-ID: 7352bd3a-0d09-11df-b5ee-a3591bb813c4@66-227-184-124
CSeq: 3 NOTIFY
Contact: <sip:[email protected]>;isfocus
Event: conference
Subscription-State: terminated;reason=noresource
User-Agent: Viceroy 1.2
Content-Length: 0
32.494025 @:0 type=4 (00000000/0)
[VCNO_REMOTEPACKETS]
[18]
30.067686 @SIP/Transport.c:121 type=4 (00000000/0)
[NOTIFY sip:[email protected]:56754 SIP/2.0
Via: SIP/2.0/UDP uen0.0;branch=z9hG4bK6ddeb2cf73f6ce49
Max-Forwards: 70
To: "Laura Macburke2" <sip:[email protected]:56754>;tag=1831371757
From: "u0" <sip:[email protected]>;tag=385103684
Call-ID: 7352bd3a-0d09-11df-b5ee-a3591bb813c4@66-227-184-124
CSeq: 3 NOTIFY
Contact: <sip:[email protected]>;isfocus
Event: conference
Subscription-State: terminated;reason=noresource
User-Agent: Viceroy 1.2
Content-Length: 0
26.059537 @SIP/Transport.c:121 type=4 (00000000/0)
[NOTIFY sip:[email protected]:56754 SIP/2.0
Via: SIP/2.0/UDP uen0.0;branch=z9hG4bK6ddeb2cf73f6ce49
Max-Forwards: 70
To: "Laura Macburke2" <sip:[email protected]:56754>;tag=1831371757
From: "u0" <sip:[email protected]>;tag=385103684
Call-ID: 7352bd3a-0d09-11df-b5ee-a3591bb813c4@66-227-184-124
CSeq: 3 NOTIFY
Contact: <sip:[email protected]>;isfocus
Event: conference
Subscription-State: terminated;reason=noresource
User-Agent: Viceroy 1.2
Content-Length: 0
24.061281 @SIP/Transport.c:121 type=4 (00000000/0)
[NOTIFY sip:[email protected]:56754 SIP/2.0
Via: SIP/2.0/UDP uen0.0;branch=z9hG4bK6ddeb2cf73f6ce49
Max-Forwards: 70
To: "Laura Macburke2" <sip:[email protected]:56754>;tag=1831371757
From: "u0" <sip:[email protected]>;tag=385103684
Call-ID: 7352bd3a-0d09-11df-b5ee-a3591bb813c4@66-227-184-124
CSeq: 3 NOTIFY
Contact: <sip:[email protected]>;isfocus
Event: conference
Subscription-State: terminated;reason=noresource
User-Agent: Viceroy 1.2
Content-Length: 0
23.162985 @SIP/Transport.c:121 type=4 (00000000/0)
[NOTIFY sip:[email protected]:56754 SIP/2.0
Via: SIP/2.0/UDP uen0.0;branch=z9hG4bK6ddeb2cf73f6ce49
Max-Forwards: 70
To: "Laura Macburke2" <sip:[email protected]:56754>;tag=1831371757
From: "u0" <sip:[email protected]>;tag=385103684
Call-ID: 7352bd3a-0d09-11df-b5ee-a3591bb813c4@66-227-184-124
CSeq: 3 NOTIFY
Contact: <sip:[email protected]>;isfocus
Event: conference
Subscription-State: terminated;reason=noresource
User-Agent: Viceroy 1.2
Content-Length: 0
22.576970 @SIP/Transport.c:121 type=4 (00000000/0)
[NOTIFY sip:[email protected]:56754 SIP/2.0
Via: SIP/2.0/UDP uen0.0;branch=z9hG4bK6ddeb2cf73f6ce49
Max-Forwards: 70
To: "Laura Macburke2" <sip:[email protected]:56754>;tag=1831371757
From: "u0" <sip:[email protected]>;tag=385103684
Call-ID: 7352bd3a-0d09-11df-b5ee-a3591bb813c4@66-227-184-124
CSeq: 3 NOTIFY
Contact: <sip:[email protected]>;isfocus
Event: conference
Subscription-State: terminated;reason=noresource
User-Agent: Viceroy 1.2
Content-Length: 0
9.754589 @SIP/Transport.c:121 type=4 (00000000/0)
[NOTIFY sip:[email protected]:56754 SIP/2.0
Via: SIP/2.0/UDP uen0.0;branch=z9hG4bK199efcba4d7aa545
Max-Forwards: 70
To: "Laura Macburke2" <sip:[email protected]:56754>;tag=1831371757
From: "u0" <sip:[email protected]>;tag=385103684
Call-ID: 7352bd3a-0d09-11df-b5ee-a3591bb813c4@66-227-184-124
CSeq: 2 NOTIFY
Contact: <sip:[email protected]>;isfocus
Event: conference
Subscription-State: active;expires=3600
User-Agent: Viceroy 1.2
Content-Type: application/conference-info+xml
Content-Length: 205
[<c-i v="0" st="f" en="sip:[email protected]">
c<h>i</h><m t="a"/><m t="v"/>
c<h>o</h><m t="a"/><m t="v"/>
</c-i>
9.753208 @SIP/Transport.c:121 type=4 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP m.0:56751;branch=z9hG4bK03684cb47799c88d
To: "u0" <sip:[email protected]>;tag=385103684
From: "Laura Macburke2" <sip:[email protected]:56754>;tag=1831371757
Call-ID: 7352bd3a-0d09-11df-b5ee-a3591bb813c4@66-227-184-124
CSeq: 1 SUBSCRIBE
Contact: <sip:[email protected]>;isfocus
Expires: 3600
User-Agent: Viceroy 1.2
Content-Length: 0
9.664868 @SIP/Transport.c:121 type=4 (00000000/0)
[ACK sip:[email protected]:56754 SIP/2.0
Via: SIP/2.0/UDP uen0.0;branch=z9hG4bK158fdb603882a2ef
Max-Forwards: 70
To: "Laura Macburke2" <sip:[email protected]:56754>;tag=1831371757
From: "u0" <sip:[email protected]>;tag=385103684
Call-ID: 7352bd3a-0d09-11df-b5ee-a3591bb813c4@66-227-184-124
CSeq: 1 ACK
User-Agent: Viceroy 1.2
Content-Length: 0
9.099356 @SIP/Transport.c:121 type=4 (00000000/0)
[INVITE sip:[email protected]:56754 SIP/2.0
Via: SIP/2.0/UDP uen0.0;branch=z9hG4bK0589ec793bcf2336
Max-Forwards: 70
To: "Laura Macburke2" <sip:[email protected]:56754>
From: "u0" <sip:[email protected]>;tag=385103684
Call-ID: 7352bd3a-0d09-11df-b5ee-a3591bb813c4@66-227-184-124
CSeq: 1 INVITE
Contact: <sip:[email protected]>;isfocus
User-Agent: Viceroy 1.2
Content-Type: application/sdp
Content-Length: 536
[v=0
o=admin 0 0 IN IP4 uen0.0
s=u0
c=IN IP4 uen0.0
b=AS:2147483647
t=0 0
a=hwi:34:1:1200
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 16386 RTP/AVP 12 3 0
a=rtcp:16387
a=rtpmap:3 GSM/8000/1
a=rtpmap:0 PCMU/8000/1
a=rtpID:1892442351
m=video 16384 RTP/AVP 126 34
a=rtcp:16385
a=rtpmap:126 X-H264/90000
a=rtpmap:34 H263/90000
a=fmtp:34 imagesize 0 rules 15:352:288
a=framerate:20
a=RTCP:AUDIO 16387 VIDEO 16385
a=pogo
a=fmtp:126 imagesize 0 rules 20:160:120:160:120
a=rtpID:123999715
Video Conference Support Report:
34.059656 @SIP/Transport.c:1218 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP uen0.0;branch=z9hG4bK6ddeb2cf73f6ce49
To: "Laura Macburke2" <sip:[email protected]:56754>;tag=1831371757
From: "u0" <sip:[email protected]>;tag=385103684
Call-ID: 7352bd3a-0d09-11df-b5ee-a3591bb813c4@66-227-184-124
CSeq: 3 NOTIFY
User-Agent: Viceroy 1.2
Content-Length: 0
33.137083 @:0 type=2 (00000000/2)
[VCCALL_ENDEDCOUNT]
[17]
30.069301 @SIP/Transport.c:1218 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP uen0.0;branch=z9hG4bK6ddeb2cf73f6ce49
To: "Laura Macburke2" <sip:[email protected]:56754>;tag=1831371757
From: "u0" <sip:[email protected]>;tag=385103684
Call-ID: 7352bd3a-0d09-11df-b5ee-a3591bb813c4@66-227-184-124
CSeq: 3 NOTIFY
User-Agent: Viceroy 1.2
Content-Length: 0
26.059889 @SIP/Transport.c:1218 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP uen0.0;branch=z9hG4bK6ddeb2cf73f6ce49
To: "Laura Macburke2" <sip:[email protected]:56754>;tag=1831371757
From: "u0" <sip:[email protected]>;tag=385103684
Call-ID: 7352bd3a-0d09-11df-b5ee-a3591bb813c4@66-227-184-124
CSeq: 3 NOTIFY
User-Agent: Viceroy 1.2
Content-Length: 0
24.061489 @SIP/Transport.c:1218 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP uen0.0;branch=z9hG4bK6ddeb2cf73f6ce49
To: "Laura Macburke2" <sip:[email protected]:56754>;tag=1831371757
From: "u0" <sip:[email protected]>;tag=385103684
Call-ID: 7352bd3a-0d09-11df-b5ee-a3591bb813c4@66-227-184-124
CSeq: 3 NOTIFY
User-Agent: Viceroy 1.2
Content-Length: 0
23.164466 @SIP/Transport.c:1218 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP uen0.0;branch=z9hG4bK6ddeb2cf73f6ce49
To: "Laura Macburke2" <sip:[email protected]:56754>;tag=1831371757
From: "u0" <sip:[email protected]>;tag=385103684
Call-ID: 7352bd3a-0d09-11df-b5ee-a3591bb813c4@66-227-184-124
CSeq: 3 NOTIFY
User-Agent: Viceroy 1.2
Content-Length: 0
22.578864 @SIP/Transport.c:1218 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP uen0.0;branch=z9hG4bK6ddeb2cf73f6ce49
To: "Laura Macburke2" <sip:[email protected]:56754>;tag=1831371757
From: "u0" <sip:[email protected]>;tag=385103684
Call-ID: 7352bd3a-0d09-11df-b5ee-a3591bb813c4@66-227-184-124
CSeq: 3 NOTIFY
User-Agent: Viceroy 1.2
Content-Length: 0
11.029675 @:0 type=2 (00000000/2)
[VCVIDEO_STARTCOMPLETED]
[16]
11.029646 @:0 type=2 (00000000/2)
[VCVIDEO_INCOMINGCOMPLETION]
[11]
10.719451 @:0 type=2 (00000000/2)
[VCUSE_INTERNALMIC]
[29]
10.650426 @:0 type=2 (00000000/2)
[VCUSEDV]
[27]
9.763906 @SIP/Transport.c:1218 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP uen0.0;branch=z9hG4bK199efcba4d7aa545
To: "Laura Macburke2" <sip:[email protected]:56754>;tag=1831371757
From: "u0" <sip:[email protected]>;tag=385103684
Call-ID: 7352bd3a-0d09-11df-b5ee-a3591bb813c4@66-227-184-124
CSeq: 2 NOTIFY
User-Agent: Viceroy 1.2
Content-Length: 0
9.688386 @SIP/Transport.c:1218 type=1 (00000000/0)
[SUBSCRIBE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP m.0:56751;branch=z9hG4bK03684cb47799c88d
Max-Forwards: 70
To: "u0" <sip:[email protected]>;tag=385103684
From: "Laura Macburke2" <sip:[email protected]:56754>;tag=1831371757
Call-ID: 7352bd3a-0d09-11df-b5ee-a3591bb813c4@66-227-184-124
CSeq: 1 SUBSCRIBE
Contact: <sip:[email protected]:56751>
Event: conference
Expires: 3600
User-Agent: Viceroy 1.2
Content-Length: 0
9.613321 @SIP/Transport.c:1218 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP uen0.0;branch=z9hG4bK0589ec793bcf2336
To: "Laura Macburke2" <sip:[email protected]:56754>;tag=1831371757
From: "u0" <sip:[email protected]>;tag=385103684
Call-ID: 7352bd3a-0d09-11df-b5ee-a3591bb813c4@66-227-184-124
CSeq: 1 INVITE
Contact: <sip:[email protected]:56751>
User-Agent: Viceroy 1.2
Content-Type: application/sdp
Content-Length: 413
v=0
o=lauraburke 0 0 IN IP4 m.0
s=u0
c=IN IP4 m.0
b=AS:2147483647
t=0 0
a=hwi:784:1:1800
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 56759 RTP/AVP 12
a=rtcp:56760
a=rtpID:-337239833
m=video 56757 RTP/AVP 126
a=rtcp:56758
a=rtpmap:126 X-H264/90000
a=RTCP:AUDIO 56760 VIDEO 56758
a=fmtp:126 imagesize 0 rules 15:160:120:160:120
a=framerate:15
a=rtpID:-362537079
9.195704 @:0 type=2 (00000000/0)
[VCVIDEO_INCOMINGATTEMPT]
[3]
9.119168 @SIP/Transport.c:1218 type=1 (00000000/0)
[SIP/2.0 180 Ringing
Via: SIP/2.0/UDP uen0.0;branch=z9hG4bK0589ec793bcf2336
To: "Laura Macburke2" <sip:[email protected]:56754>;tag=1831371757
From: "u0" <sip:[email protected]>;tag=385103684
Call-ID: 7352bd3a-0d09-11df-b5ee-a3591bb813c4@66-227-184-124
CSeq: 1 INVITE
Contact: <sip:[email protected]:56751>
User-Agent: Viceroy 1.2
Content-Length: 0
9.118898 @SIP/Transport.c:1218 type=1 (00000000/0)
[SIP/2.0 100 Trying
Via: SIP/2.0/UDP uen0.0;branch=z9hG4bK0589ec793bcf2336
To: "Laura Macburke2" <sip:[email protected]:56754>
From: "u0" <sip:[email protected]>;tag=385103684
Call-ID: 7352bd3a-0d09-11df-b5ee-a3591bb813c4@66-227-184-124
CSeq: 1 INVITE
User-Agent: Viceroy 1.2
Content-Length: 0
0.266057 @:0 type=2 (00000000/2)
[VCUSEDV]
[27]
0.000000 @:0 type=2 (00000000/2)
[VCUSEDV]
[27]

IChat video freezes after a few seconds of "chatting"

I am able to start a video discussion using iChat with someone on AOL, but the video image freezes after about 10 to 15 seconds. Is there a setting that needs to be changed? Is this a common problem?

Ok If they have the AOL package it includes the AIM IM application.
1) it has to be activated for use and it sounds like you are pats this.
2) depending how old the package is will determine which AIM application it is based on.
Most likely it is AIM 5.9 if it is a bit older.
IF it is it should have several things done.
a) the IM part of AOL needs to be allowed as an Exception in the XP Firewall See here and allow for the AOL package if required)
b) The most likely. It will need to have the Video Quality reduced.
In AIM 5.9 the outgoing Video appears as a tab behind the incoming one.
This tab should be brought to the front.
Next to the Video now should be a small icon.
Click on it and a slider should appear.
Slide the slider to the left to reduce the quality.
This will in fact allow their processor to produce more frames per sec and the pic should not freeze.
c) they should look at message 570 and see if this applies to them
8:35 PM Tuesday; June 19, 2007

YouTube video stalls after a few minutes (on longer videos)

This is a recurring issue which I thought was fixed by the 2.2.1 update but it then started up again.
I have read posts on other forums with users experiencing the same thing. Some say it stops at predictable times based on the length of the video (usually anything over 4 mins).
But as I said, it seemed to get fixed when i updated, so I'm not sure what messed it up again... Restoring/re-patching it might work again but then it would only come back i guess.
Along the same lines... Youtube videos don't seem to be very searchable (across the timeline, from what has loaded so far). If i change position to an earlier point the loaded progress region jumps back to that point and occasionally the video stops working or is slow to respond. It would be great if online videos had the same ease of use and search-ability as ones on the device (other than the initial loading up).
Thanks

Hello Oremus Productions,
First of all, sorry for this frustrating issue. The first thing to check with OS X Mavericks or Yosemite is the permissions of your Adobe folders. Here is blog post to check out: Premiere Pro CC, CC 2014, or 2014.1 freezing on startup or crashing while working (Mac OS X 10.9, and later)
The other thing I'm curious about is ProRes and if Premiere is handling it properly. Tell me, do you have Final Cut Pro 7, Final Cut Pro X, iMovie, or any of the Apple video products installed? Do you have any components in your Mac HD > Library > QuickTime?
Thanks,
Kevin

H215 Loses the analog video signal after a few minutes after start up.

After Windows 7 is loaded and about 30 minutes to an hour of normal screen and computer usage, the display goes black and my Viewsonic monitor says that the analog signal is missing and then goes into power save mode. Why is this happening? And the only way to resume the use of the computer is to force shut down the tower and then to power it back on. Which then runs through the failed start because I had to force shut down the system due to the display losing its signal. Please assist in this matter. I just bought the system a few days ago and for it to be doing this is quite dissatisfying. Thanks.
The system specs is:
CPU: AX2 250
RAM: 4GB
HDD: 1 TB
ODD: DVD-RW
OS: WIN 7 HP
D4RK51D3 G.F.X. LLC
Engineering the 1337 way.

Hello Oremus Productions,
First of all, sorry for this frustrating issue. The first thing to check with OS X Mavericks or Yosemite is the permissions of your Adobe folders. Here is blog post to check out: Premiere Pro CC, CC 2014, or 2014.1 freezing on startup or crashing while working (Mac OS X 10.9, and later)
The other thing I'm curious about is ProRes and if Premiere is handling it properly. Tell me, do you have Final Cut Pro 7, Final Cut Pro X, iMovie, or any of the Apple video products installed? Do you have any components in your Mac HD > Library > QuickTime?
Thanks,
Kevin

A105-S4074 Freezes After a Few Minutes, Sometimes with a Continuous Beep

Win XPSP3, 1.5 GB RAM
After 10 min or so computer freezes; requires a hard shutdown (press power button for 4 sec); will re-start and run again for 10 min, or so. Checked temps with Speedfan - highest I've seen is 60+/-, which doesn't seem excessive to me. RAM has passed Memtest86+ for 12 hours.
Anyone have any ideas?
Thanks!

considering that 60 that you are seeing is in celsius which is 140 fahrenheit thats pretty close to cooking your processor. clean out the air vents and fan with compressed air. hold the fan still with a toothpick to keep it from spinning as the compressed air will spin the fan faster than it is rated to fo and cause damage.
-civicman4-
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Post all info about your laptop and version of windows. We are working on it but still do not have the powers to read your mind.

Firefox freezes after a few minutes of being on youtube and wont reload youtube again until you close it for a while

Youtube freezes and wont reload the webpage until I manually close firefox and wait for a couple of minutes.
== URL of affected sites ==
http://www.youtube.com

Hello Anonymous.
You may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
If you want support for one of your add-ons, you'll need to contact its author.

Photoshop freezes after a few minutes

Hi,
I'm working on a Intel coRe 2 CPU at 2.33 GHz with 3.25 GB of RAM. I opena file in photoshop, then open another and it freezes up. I've already set my scratch disks to the C drive, can anyone tell me why it's doing this?
Thanks,
Stan

I don't have a dedicated drive or partition. I usually always set it to C and it works fine. Does anyone know if there are issues with more than 2 GB of RAM and PS?

Sound freezes after a few minutes.

/var/log/messages gives me:
Jun 29 13:03:29 myhost Pid: 3433, comm: xmms Not tainted 2.6.25-ARCH #1
Jun 29 13:03:29 myhost [<c0158e04>] __report_bad_irq+0x24/0x90
Jun 29 13:03:29 myhost [<c01590f2>] note_interrupt+0x282/0x2c0
Jun 29 13:03:29 myhost [<c0158570>] handle_IRQ_event+0x30/0x60
Jun 29 13:03:29 myhost [<c0159963>] handle_level_irq+0xd3/0x100
Jun 29 13:03:29 myhost [<c010825b>] do_IRQ+0x3b/0x70
Jun 29 13:03:29 myhost [<c013db00>] autoremove_wake_function+0x0/0x50
Jun 29 13:03:29 myhost [<c0105b47>] common_interrupt+0x23/0x28
Jun 29 13:03:29 myhost [<c0158557>] handle_IRQ_event+0x17/0x60
Jun 29 13:03:29 myhost [<c015990d>] handle_level_irq+0x7d/0x100
Jun 29 13:03:29 myhost [<c010825b>] do_IRQ+0x3b/0x70
Jun 29 13:03:29 myhost [<c0105b47>] common_interrupt+0x23/0x28
Jun 29 13:03:29 myhost [<c0300000>] cpu_init+0x220/0x29a
Jun 29 13:03:29 myhost =======================
cat /proc/interrupts gives me
[session@myhost ~]$ cat /proc/interrupts
CPU0
0: 264564 XT-PIC-XT timer
1: 4962 XT-PIC-XT i8042
2: 0 XT-PIC-XT cascade
3: 1 XT-PIC-XT
4: 1 XT-PIC-XT
5: 0 XT-PIC-XT Intel ICH6 Modem
6: 1 XT-PIC-XT
7: 1 XT-PIC-XT
8: 5 XT-PIC-XT rtc0
9: 31 XT-PIC-XT acpi
10: 200000 XT-PIC-XT Intel ICH6
11: 139561 XT-PIC-XT eth0, ipw2200, uhci_hcd:usb1, uhci_hcd:usb2, uhci_hcd:usb3, uhci_hcd:usb4, ehci_hcd:usb5, yenta, firewire_ohci, i915@pci:0000:00:02.0
12: 98826 XT-PIC-XT i8042
14: 8829 XT-PIC-XT ata_piix
15: 13790 XT-PIC-XT ata_piix
NMI: 0 Non-maskable interrupts
LOC: 0 Local timer interrupts
RES: 0 Rescheduling interrupts
CAL: 0 function call interrupts
TLB: 0 TLB shootdowns
TRM: 0 Thermal event interrupts
SPU: 0 Spurious interrupts
ERR: 0
MIS: 0
Also, my cpu load goes sky high.
I have tried with the acpi=noirq option with no luck.
Any help on this would be much appreciated. Can't live without the music
Last edited by Session (2008-06-29 12:25:49)

After a while erverything slowed down and the computer was useless. So I'm back to where I started.

Elements Organizer 10 terminates after a few seconds, PC crashes after a few minutes

A couple of weeks ago, I installed Photoshop+Premiere Elements from the Adobe online store. Within a couple of days, I noticed that Elements organizer would crash within a minute of starting, sometime withing a few seconds.
Also, even when I wasn't running Adobe, my PC would freeze after a few minutes with the HDD light solidly on. My PC had never crashed before this installation.
After a little sleuthing using task manager, I found that all the memory in my system (4GB) gets suddenly hogged (within seconds) by the "Elements Organizer" process (3GB) ... I found the service correspponding to this process, "Adobe Active File Monitor v10", stopped it and set autostart to manual. My PC no longer crashes.
I think Adobe needs to look into this one - it has all the hallmarks of a nasty memory leak.
A couple of possible clues as to why certain systems don't take well to this service:
- I have a few very large video clips (2hours+) on my PC
- I installed trial products like light room, CS5 before settling on Photoshop+Premiere Elements - could leftovers after uninstalling cause conflicts?
- I have other video editors on my system that I don't use, like Corel VideoStudio and Sony Vegas.
Thoughts?

Corrections - the process name is ElementsAutoAnalyzer.exe - and unfortunately, the Adobe Active File Monitor v10 does not spawn ElementsAutoAnalyzer.exe.
I disabled it by renaming it - it was under:
C:\Program Files (x86)\Adobe\Elements 10 Organizer\CAHeadless
I see from google that a lot of people have this problem...

MS Excel - can't enter data after a few minutes of operation

Ever since upgrading to Yosemite, MS Excel partially freezes after a few minutes of being open. Specifically, I cannot enter data or numbers into any cell, although other functions (including cut/pasta and entering data in the Search box) continue functioning fine. The work-around solution is to close and reopen Excel, although after several minutes the same problem repeats.
Any help is appreciated.

Are you running the latest Office version (14.4.6 for Office 2011)?

Incoming Video freezes after a few minutes Using S...

Similar Messages

Maybe you are looking for