Incompatibility MacPro Quad-Core 2010 and AirPort Extreme for DHCP

Hello,
I have a MacPro 2.8 Ghz Quad-Core Intel Xenon 2010 EFI 1.5, for my internet, I use an AirPort Extreme Base Station version 7.4.2.
When I try to access the internet settings of the AirPort Extreme in the DHCP, the first DHCP address does not select anything in the dropdown menu.
Here is a picture screen:
http://img210.imageshack.us/img210/4995/airportdhcp.jpg
I tried with a second MacPro Quad-core 2.8 Ghz and the error persists. By cons, with a MacBook Pro 3,1 or IMac 4.1, normally I go to the menu in question.
For it is impossible to modify the airport extreme settings with an error message that afirm the first IP address is invalid.
Unable to select because the menu is empty.
I really think a bug MacPro?
Someone does have this problem?
Thank you for your help.
Roberto
Not speaking much English text translated automatically by Google.

roberto1971 wrote:
When I try to access the internet settings of the AirPort Extreme in the DHCP, the first DHCP address does not select anything in the dropdown menu.
It is possible that the new version of AirPort Utility may help:
http://support.apple.com/kb/DL955
"Resolves an issue that caused the DHCP settings tab to display incorrectly"

Similar Messages

  • How to configure iMac and Airport Extreme for remote access?

    I want  to view videos stored in iTunes on my iMac remotely over the Internet when I away from my home network.  My home network setup includes AirPort Extreme with Comcast High Speed Internet Service (16Mbs/6Mbps).  I use AirPlayit to support the iMac as a server and have the iPad 3 and iPhone 4 apps for AirPlayit.  I have no problem viewing my videos over my home network on any of my mobile devices but for some reason I am unable to configure my firewall so that I can access my iMac remotely when I am away.

    Turning off the wireless on the TP-Link router does not make it a simple modem.
    You need to configure the AirPort Extreme in Bridge Mode to operate correctly with another router on the network.
    Open AirPort Utility and click on the AirPort Extreme icon, then click Edit
    Click the Network tab a the top of the window
    Make sure that the setting for Router Mode is "Off (Bridge Mode)"
    Click Update to save the new settings
    Wait 30 seconds for a green light on the AirPort Extreme, then power off the complete network....all devices....in any order you want.
    Wait a minute, then start the TP-Link modem/router first and let it run a full minute
    Start the AirPort Extreme next the same way
    Keep starting devices one at at a time the same way until the entire network is back up.

  • Setup Modem/Router and AirPort Extreme running DHCP, NAT

    I have a basic modem/router from my ISP which didn't always work very well, so upon suggestion instead of upgrading to a new one I purchased an airport express to use with the modem, since we mostly use apple devices at home.
    The idea is to use the old modem/router strictly as a modem and use AirPort Express for everything else (routing & access point).
    However I need some technical info to set this up, since I not very familiar with networking.
    This is what I understand: In my old modem/router, I need to turn off wireless (it will be connected to the airport via Ethernet cable) and DHCP and NAT (if I can figure this out) as well as the firewall. After that, I should connect the airport to create a new wifi network and have it run DHCP & NAT (which will also provide firewall services)
    Does this sound right?
    Also, the Airport product page mentions that it can also run/provide the following: PPPoE, VPN Passthrough (IPSec, PPTP, and L2TP), DNS Proxy, SNMP, IPv6. Sorry if it sounds ignorant, but do I need to bother with any of this? Specifically PPPoE, which sounds like a modem function.
    Again, since we're talking about a crappy modem here, the idea is to let the Airport do most of the work, and leave the least up to it.
    Thanks in advance.

    I found the answer in an Amazon review:
    1. Auto-Configure the modem with your ISP by directly connecting the modem to your computer. Follow the instructions given in the booklet/user manual/ISP letter to enter the PPPoE username & password.
    2. After configuration is complete, confirm that you are connected to the internet.
    3. Click 'Advanced Setup' on the Main Menu.
    4. Turn off DHCP Server on the 'DHCP Settings' page. Click Apply.
    5. Go to 'WAN IP Address' page and click Yes on the warning. Select RFC 1483 Transparent Bridging. Click Apply.
    6. The Internet light on the modem will turn off and always remain off in bridged mode.
    7. Remove cable from computer and plug into WAN port of your Router.
    8. In your router settings enter the PPPoE username & password. Follow instructions in your router's user manual to enable DHCP on your router.
    You should now be connected to the Internet using your modem & router in bridged mode.

  • Pointer jumps all over the screen erratically on new MacPro Quad Core

    I just powered up my new MacPro Quad Core Xeon for the first time today. For the monitor, my new Viewsonic VG2230. I noticed that my new mighty mouse was skipping all over the screen and it was hard to get the pointer on the place on the screen I wanted to click. It got much worse when I added the second monitor (Viewsonic VA1912), and didn't want to move across from one screen to another at first.
    I thought maybe it was the mouse, and put on my old Razor Pro mouse, which I know and love. Same problems. I switch USB ports still the same.
    According to Viewsonic, both monitors are compatible, and I have used the VA1912 successfully on my old PowerMac. I thought it was odd that the number of screens affected the problem, which is why I am concentrating on the monitors, but I wonder if it isn't a problem with my Mac.
    Any ideas?

    Hello g:
    Welcome to Apple discussions.
    I suspect a faulty mouse. However, try two things first. Trash a preference file (com.apple.bluetooth.plist) and restart. Reset the PRAM:
    http://support.apple.com/kb/HT1379
    Second, after assuring Apple this really was a problem, i got the ultimate insult. "If you would like to lodge a technical support ticket, we will need your credit card. This call will cost you $150.00."
    You see, I bought this thing four months ago. Apparently you only get a 90 day free call period. After that you're warranty is actually a cost per call scenario…..
    There is no Apple charge for a warranty issue and the mouse has a one year warranty. Call Applecare back (or take it to a store if they have one close to you). Unless I am badly mistaken, Apple will replace the mouse and pay for shipping both ways (I had one fail a couple of years ago myself). Do identify the call as a warranty issue.
    Barry

  • I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image an

    I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image and I can place the first pin.  However, when I go to add the second pin, Photoshop crashes. I have tried with on a new, blank file, with just a few lines on it, but, as soon as I place the first pin, the image disappears, and then, as soon as I click anywhere else in the image, Photoshop crashes. I have followed all the online advice about settings under the Preferences/Performance interface, but nothing fixes the problem. Can anyone please help?

    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
    A screen shot could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Setting up network with ATT Uverse, Time Capsule, and Airport Extreme..HELP

    PLEASE HELP!
    I have ATT U-Verse which provides their own router. My Time Capsule is connected to the router (in the living room) via an Ethernet cable and has been working fine, and is set up like this:
    Wireless Mode: Join a wireless network (I joined the ATT network 2wire)
    Network name: 2wirexyz
    Wireless Security: WPA/WPA2 Personal
    Channel: 5
    Connect Using: Wireless Network
    When I try to add my Airport Extreme (for wireless printing in the office) by adding it to the same network (I've also tried to extend the network option) the Airport Utility thinks forever then comes up with an error and the Airport continues to flash amber. I've tried resetting the Extreme multiple times and configuring different ways but same result.
    What am I doing wrong?? Please help, my wife is giving me grief for not being able to print wirelessly from her MacBook!!
    Thank you in advance for any help you can give me!

    Thank you Tessarax....
    So does that mean I need to create a separate wireless network? I apologize, I'm not extremely familiar with how to complete what you've suggested. I know I've seen the bridge mentioned before in the Airport Utility when I've been trying different things. Would you mind giving me some more specific instructions please? Actually I just tried messing around with Airport Utility, let me know if I'm headed in the right direction:
    For TC wireless mode I want to "Participate in a WDS network"?
    Then where does my WDS remote come from? is that the Airport Extreme? I've plugged in the AEBS but it's not showing up in the Airport Utility...
    I'll mess around with it some more tomorrow morning. Thanks I'll let you know how it goes.
    Message was edited by: Jerimy75

  • How to connect my iPad, Brother printer, and AirPort Extreme?

    How to connect my iPad, Brother printer, and AirPort Extreme?

    I don't believe any of the Brother printers are AirPrint-enabled. Is your Brother printer network-ready? That is, does is support either/both a wired or wireless connection or just uses USB to connect?

  • How to set up Airport Extreme for 11ac and 11n?

    I have just purchased the new Airport Extreme (August 2014) because Apple's website states
    Simultaneous dual-band support.
    AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
    I have number of Macs in my home from a new MacBook Pro with Mavericks to a Macbook Air with Snow Leopard (due to required software) and iPads.
    So after setting up the new Extreme my new MacBook only accesses 11n as does my older Macs. I checked by holding down the option key while clicking the WiFi icon at the top of my Mac. Well, not so automatic then as I was expecting 11ac and 3 times faster access (as stated by Apple).
    I then looked for some documentation for setting up but cannot find anything.
    Hence my question here.
    How to set up Airport Extreme for 11ac and 11n simultaneously?
    At present the new Extreme is no better than my previous 2 year old one.
    Thank you.
    Michael

    How to set up Airport Extreme for 11ac and 11n simultaneously?
    Assuming that it is operating correctly, 802.11ac and 802.11b/g/n are broadcast simultaneously by default.
    Simultaneous dual-band support.
    AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
    That is advertising. The real information is usually found in the small and hard to read footnotes:
    Based on theoretical peak speeds. Actual speeds will be lower.
    AirPort Extreme is based on an IEEE 802.11ac draft specification. Performance based on comparison with Apple’s 802.11n products. Comparison assumes AirPort Extreme network with 802.11ac-enabled computer. Speed and range will be less if an 802.11a/b/g product joins the network. Accessing the wireless network requires a Wi‑Fi-enabled device. Actual speed will vary based on range, connection rate, site conditions, size of network, and other factors. Range will vary with site conditions.
    Since the 802.11ac signal is being broadcast only using the 5 GHz band, some users report that they have had better results by using the option to assign a different name to the 5 GHz band, and then pointing their Mac to that specific signal or network. You may want to try that option.
    But first as a test, please locate the MacBook Pro about 10-15 feet or 3-4 meters from the AirPort Extreme with clear line-of-sight between the two devices. Restart both the AirPort Extreme and the Macbook Pro and then check to see if the Mac is connected to an 802.11ac signal.
    If not, please power off your other wireless devices...computers, mobile devices, etc. temporarily, and try the same test again.
    Please report on your results.

  • Can I use the Time Capsule strictly for system backup and continue to use my Airport Extreme for all my wireless needs

    I want to use the Apple Time Capsule as an external drive and continue to use my Airport Extreme for all my wireless needs. Can I do that? The reason I ask is that my Time Machine utility cannot find the TIme Capsule - it only shows me the Airport Extreme, even when I "Rescan". SO I am unable to use the Time Capsule.

    You will need to connect an Ethernet cable from one of the LAN <-> ports on the AirPort Extreme to the WAN "O" port on the Time Capsule.
    Perform a "hard reset" on the Time Capsule by holding in the reset button for 9-10 seconds, then give it another minute to restart to a slow, blinking amber light.
    Open AirPort Utility, select the Time Capsule, and click Manual Setup
    Click the Time Capsule tab located below the row of icons to assign a name to the Time Capsule, a device password, and adjust Time Zone settings.
    Next, click the Wireless tab located to the right of the Time Capsule tab
    Change the setting for Wireless Mode to Off
    Click the Internet icon, then click the Internet Connection tab
    Connect Using = Ethernet
    Connection Sharing = Off (Bridge Mode)
    Click Update at the lower right to save the settings and allow 30 seconds for the Time Capsule to restart to a green light.
    You are all set

  • My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house.  Is there a way to use the second Airport Extreme for file storage on this network?

    My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house.  Is there a way to use the second Airport Extreme for file storage on this network?  Network is administered through an iMac running OS X Yosemite 10.10.2.  Ideally, would like for the second Airport Extreme hard drive to appear on the list of devices in the Finder window.

    Ok.. gottcha
    The problem is network wise.. Yosemite is about equal to tin cans and string.. pathetic.
    Here is my usual set of instructions to get anything working on Yosemite.
    The best way to fix problems is a full factory reset of all the AE in the network.
    Factory reset universal
    Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    Then redo the setup from the computer with Yosemite.
    1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
    eg AEgen5 and AEwifi for basestation and wireless respectively.
    Even better if the issue is more wireless use AE24ghz and AE5ghz with fixed channels as this also seems to help stop the nonsense.
    2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
    3. Ensure the AE always takes the same IP address.. this is not a problem for AE which is router.. it is a problem for AE which is bridged.. you will need to set static IP in the main router by dhcp reservations or use static IP in the AE which is tricky.
    4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
    5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
    6. Now mount the disk of the second AE in finder... manually.
    Use Go, Connect to Server and type in the AE ip address.
    SMB://10.0.1.2
    Where you will replace that address with the actual address. The network resource should be discovered and then it will request the password.. type that in and make sure you tick to save it in your keychain.
    There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
    Do as much as you want of the above... not all of it is necessary.. only if you want it reliable.. or as reliable as Yosemite in its current incarnation can manage.
    The most important thing is point 6.. mount the disk using direct IP address and not names.. dns in Yosemite is fatally flawed.
    See http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

  • Extending a network with Time Capsule and AirPort Extreme (via Belkin powerline)

    Hello -
    I've seen many topics about extending wireless networks here, but none seems to resolve the issue I'm having. I currently have a setup where a DSL cable modem is connected to a Time Capsule and I need to extend this network to another room using an AirPort Extreme.
    I live in a very old apartment in Brazil and the walls seem to block the signal from one room to another, hence the need to extend it. Since wireless signal is very weak between rooms, I bought a Belkin powerline AV500 so I could connect both Time Capsule and AirPort using the electrical power at home (just installing a regular Ethernet cable between rooms is not an option).
    I started with the basics: configure the Time Capsule + DSL as a standalone network, and it works perfectly within it's range. Then I connected the Belking powerline, plugged a MacBook via Ethernet on the other end and still got very good results (actually better speed than expected). Used it for a while with streaming and other network intensive tasks to make sure it could sustain the connection.
    Finally, pluggned the AirPort Extreme on the Belking powerline and this is where the problems started. AirPort Utility 6.3.1 only gives me the option of extending a network wirelessly - it doesn't seem to give me the option of extending it via Etherenet (roaming), which is not good in my case. Luckly I had a copy of AirPort Utility 5.6 which seems to do the job (or I thought so), but it's still not working well.
    Although I managed to configure both with the same name, it doesn't seem reliable and some devices (the iPhone 5, for example) are unable to connect and end up with a self-asigned IP address. I'm almost sure I'm doing something wrong on the setup, as I've seen a similar setup working before, so if anyone out there has any clue of what can be done, it will be much appreciated.
    Attached the screenshots of both Time Capsule and AirPort Extreme configurations.
    Thanks a lot,
    -TM
    AirPort Exteme:
    Time Capsule:

    Hello JuliaApple. Welcome to the Apple Discussions!
    You have several ways to configure both base stations for what you are trying to do.
    The simplest would be to configure the Time Capsule (TC) to "join" (AirPort Utility > Manual Setup > Wireless tab > Wireless Mode = Join a wireless network) your existing 802.11n AirPort Extreme Base Station (AEBSn). In this type of configuration the TC would perform as any other wireless client and not perform as a router. It will; however, still allow for both backups and sharing USB devices attached to it.

  • Can a time machine usb drive backup the data from an external usb drive connected to and airport extreme*

    can a time machine usb drive conected to my mac book backup the data from an external usb drive connected to and airport extreme ?

    Hi Adam, if you think yoiur HD may be failing you could do a TM restore onto the new disk. I would rather see you do a clone either SuperDuper or CarbonCopy Cloner.Of your internal drive. That way you have a bootable backup in case it does fail.
    btw - what are the symptoms of your failing drive?
    -mj
    Message was edited by: macjack

  • Macbook pro and airport extreme don't work

    A friend (and all those tv commercials) say everything just works with Macs. Well, not exactly. New Macbook Pro and Airport Extreme can't connect me to the internet. I still have PC connected via ethernet cable to my cable modem and router which is in the basement where the cable enters the house. I've tried the different options in Airport Extreme setup and nothing works. It doesn't help Apple assumes I know everything about DHP PPPOE NAT or whatever all those silly things are.
    Can anyone explain in +very simple+ terms how I get this expensive piece of aluminum connected to the internet?
    Thanks.

    Hello sofarapplesux. Welcome to the Apple Discussions!
    I assume that you will continue to use the modem and router in the basement to get your Internet access ... correct? What is the make/model of this router?
    If that's the case, I will also assume that you have the 802.11n AirPort Extreme Base Station (AEBSn) connected by Ethernet to this router ... correct?
    So your overall network configuration should look something like the following:
    Cable modem > (Ethernet cable) > \[Internet port] router \[LAN port] > (Ethernet cable) > \[WAN port] AEBSn ... close?

  • My Mac Pro tower quad core crashed and is showing a NO sign (the circle with a slash through it). How do I safely get it to come back up ? Model A1186

    My Mac Pro tower quad core crashed and is showing a NO sign (the circle with a slash through it). How do I safely get it to come back up ? Model A1186

    General purpose Mac troubleshooting guide:
    Isolating issues in Mac OS X
    Creating a temporary user to isolate user-specific problems:
    Isolating an issue by using another user account
    Identifying resource hogs and other tips:
    Using Activity Monitor to read System Memory and determine how much RAM is being used
    Starting the computer in "safe mode":
    Mac OS X: What is Safe Boot, Safe Mode?
    To identify potential hardware problems:
    Apple Hardware Test
    General Mac maintenance:
    Tips to keep your Mac in top form
    Troubleshooting: My computer won't turn on
    https://support.apple.com/kb/TS1367
    Where are your bootable backups and clones stored?
    What do you have to boot from to restore or attempt to recovery files that are not backed up?
    It won't be a PowerMac. People tend to think they look alike? or mean the same thing.
    http://www.everymac.com/systems/apple/mac_pro/specs/mac-pro-quad-2.66-specs.html
    Try zap PRAM and SMC Reset. If you have ATI 5770 which many have upgraded to you won't be able to use older DVD or systems than 10.6.5

  • Rec Specs for External HD and AirPort Extreme

    I've been using my AirPort Extreme for a few months now and am very happy with the product.  I've encounterd one problem, though.  I have an external harddrive attached to the AirPort Extreme to wirelessly share my various media libraries (iTunes, iPhoto, etc.).  The HD works fine usually when I'm using it to play music via iTunes on my MacBook or from my MacBook to my AppleTV via AirPlay.  The HD will just stop working if I do anything more intensive than that, though, like burning CDs or downloading multiple podcasts at once.  The HD is an older LaCie 250GB; I'd provide a product number, but it doesn't have one visible.
    Is the issue I'm having resulting from the HD not being powerful enough to support the task of being shared wirelessly while performing more demanding tasks?  If so, I assume I would need to purchase a newer drive.  If so, can someone recommend specs to look for for a drive that will be able to be shared wirelessly using an AirPort so that I can both access my media libraries and write to them without the HD dropping out in the middle of the process?
    Thank you.

    I just found out something today which might help you Daniel, but that doesn't solve our problem in a "classic" way...
    So I was very obsessed by the fact that Windows Vista could actually access the shared HD with Bonjour and with a lot of testing I found this : let's say my macbook pro was off, if I would access the HD with Vista and then open up the MacBook Pro, then there would be no problem.
    Eventually I found out that the problem really came from the fact that my WD MyBook 1Tb external drive was putting itself on standby after a while (which is a good thing actualy). When I was trying to connect to the drive while it was on standby with Finder, it would try to connect forever... however, it would physically wake up the external drive (I could tell by the sound)... but too late for Finder, and no way to access it other than rebooting the Mac... OR crashing Finder (Apple Menu - Force to quit). Then the Finder restarts automatically and the drive works.
    I really don't like this solution (having to crash finder) but it works.
    PLEASE if someone has a better way, let me know !!!

Maybe you are looking for

  • Iphone 4 slow after IOS 8 upgrade

    I've upgraded my phone to IOS 8.0.2 and I've noticed a substantial decrease in both performance and ability to use SIRI.    Apps load incredibility slow and SIRI is painfully slow.    At least 8 seconds to load, and then another 8 to 10 to get the ap

  • Purchase Ledger report

    I want a report on Purchase Ledger & Stock ledger. What are the std reports? Regards VS

  • How do I view photos in a folder by date taken rather than by date imported?

    Hi, I've got some 500 photos in a folder which were imported on two different dates. I've created a new album on the right hand side under "Organize" and just the photos I want are in there. When I look at the folder on the right, all the pictures ar

  • How do i reinstall yosemite on new hard drive without a disk?

    I bought a used imac late 2009 as mine died and needed far to much to be repaired.  It came with yosemite installed.  I used carbon copy cloner were I had an external hard drive with a recent backup image.  I connected a usb external device and boot

  • ITunes will not run on Windows 7 unless "run as Admin" is selected

    I have been running iTunes in Windows 7 for a long time, then about 2 weeks ago, it stopped running, I double click the icon and it just hangs then nothing happens... I read through posts and found one that said to try running as admin, I tried it an