Incompatible device detected printer mg6222

I am receiving the error message "incompatible device detected can go no further after the message.

Hi durkinjt!
To have a better understanding of your issue, please let everyone know what operating system you are using and where you see the error message. That way, community will be able to assist you with suggestions appropriate for your product.
Thanks!

Similar Messages

Solution Centre in Win 8.1 keeps runs device detection on every use

New Win 8.1 notebook. Connected the OfficeJet Pro 8500A A910g by USB. Windows detected and loaded printer driver, also loaded network driver as printer connected via wireless. Disconnected USB cable. Downloaded and installed HP full software package. It went through device detection, wirless, could not find printer, gave it the IP address, it then found it OK. Went through all steps including opening an HP web page to sign up for something. It created desktop shortcut and enabled scan over network. Can scan from device to PC, works just fine. Next time I wanted to scan from PC, double click on desktop shortcut, UAC pops up, say OK can make changes. Goes through device detection agian. Eveything works. Closed Solution Centre. Re-opened it and same thing. Every time I want to use the Solution Centre I have go through teh detection process. I tried running the .exe directly from Windows Explorer so there are no switches in the command line, no change. There must be a fix.

Hi,
Please try following the steps below and let me know if that helps:
From the Control Panel go to View devices and Printers.
Right click the HP Officejet Pro 8500A and select Remove Device, next unplug the USB,
from the start menu's search bar type %temp%. open the temp folder and then open the newest installation folder which starts with 7z, then open the Utils folder.
For a 32 bit OS open the X86 folder, open the X64 folder for a 64-bit OS.. follow those steps if you aren't sure about your OS type:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03666764&lc=en&cc=us&dlc=en
Run the RemovePreinstalledDrivers file and allow it to reach 100%
Go 2 folders up back to the 7z folder and locate the installation MSI file:
search for *x86.msi or *x64.msi, depanding on your OS type.
Right click the larger MSI file out of the 2 resutls, then click on Repair. if you get a prompt that it is only valid for installed software select Instal instead of repair.
Reboot your PC if prompted to do so.
Open the Officejet Pro 8500A software and follow the steps to reconfigure the device, then check for any difference.
Please let me know if that helps,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Atheros ar5b95 generates 104 Error: incompatible wireless device detected

The intel wireless card failed in CQ61 - 425SA. So i ordered an Atheros AR5B95 that is listed as compatible here at the HP site and at the manufacturer's site.
Unfortunately, the machine won't boot with the card inserted, generating error message 104: Incompatible Wireless Device Detected.
I had a look at the BIOS but it's up to date (F.23) and there appears to be no place in the setup menu where I can indicate a different wireless card. I tried installing new drivers but, of course, if the machine won't book I can't install the drivers for the card.
The card is imprinted with the AR5B95 identity and Atheros branding, so I presume it's genuine.
Any help would be greatly appreciated.

hp implement whitelisting of wifi cards in BIOS, your original intel would of had hp part number that matched with allowed numbers in the BIOS thus boot without 104 error > your current atheros is a generic atheros card & the BIOS sees no matching part number so flags 104 error.
You have 2 choices, 1: buy a correct hp branded card that is supported by your BIOS , 2: install a no whitelist BIOS so you can use any wireless card .
No whitelist bios link below >
http://www.bios-mods.com/BIOS/index.php?dir=Whitelists%2F&download=sp51527_NWL_EISTUlk_MoreOptions_B...
You may need tape pin 20 on the atheros card with some scotch tape & use windows 7 mobility centre to toggle wifi on/off
Like my post? Click Kudos (thumb+) to show appreciation.

Xorg-No Device Detected-ATI Radeon [solved]

I keep getting errors while trying to start the X server- EE No Deviced Detected. I'm usting a dell inspiron 600m laptop with an ATI Radeon 9000 mobility.
I used the fglrx driver which loaded perfectly, it's just not working when i start X.
Here is my /var/log/Xorg.0.log
X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: UNKNOWN
Current Operating System: Linux derek-laptop 2.6.21-ARCH #1 SMP PREEMPT Sun May 6 18:33:47 CEST 2007 i686
Build Date: 08 April 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 2 21:02:08 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Xorg Configured"
(**) |-->Screen "aticonfig-Screen[0]" (0)
(**) | |-->Monitor "aticonfig-Monitor[0]"
(**) | |-->Device "aticonfig-Device[0]"
(**) |-->Input Device "Keyboard0"
(**) Option "XkbRules" "xorg"
(**) XKB: rules: "xorg"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(WW) Option "XkbLayout" requires an string value
(WW) Option "XkbVariant" requires an string value
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "USB Mouse"
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/75dpi").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/75dpi").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/100dpi").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/100dpi").
(WW) The directory "/usr/share/fonts/PEX" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/cyrillic".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/cyrillic").
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ttf/western" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ttf/decoratives" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/openoffice" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/ttf-bitstream-vera" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/CID" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/TrueType" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/misc
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Option "AllowMouseOpenFail" "true"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81c44a0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.1
X.Org XInput driver : 0.7
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.1
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,3340 card 1028,01be rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,3341 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:1d:0: chip 8086,24c2 card 1028,01be rev 01 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,24c4 card 1028,01be rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,24c7 card 1028,01be rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,24cd card 1028,01be rev 01 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev 81 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,24cc card 0000,0000 rev 01 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,24ca card 1028,01be rev 01 class 01,01,8a hdr 00
(II) PCI: 00:1f:5: chip 8086,24c5 card 1028,01be rev 01 class 04,01,00 hdr 00
(II) PCI: 00:1f:6: chip 8086,24c6 card 14f1,5422 rev 01 class 07,03,00 hdr 00
(II) PCI: 01:00:0: chip 1002,4c66 card 1028,01be rev 02 class 03,00,00 hdr 00
(II) PCI: 02:00:0: chip 14e4,170c card 1028,8127 rev 02 class 02,00,00 hdr 00
(II) PCI: 02:01:0: chip 1217,7113 card d001,0000 rev 20 class 06,07,00 hdr 82
(II) PCI: 02:01:1: chip 1217,7113 card d801,0000 rev 20 class 06,07,00 hdr 82
(II) PCI: 02:03:0: chip 8086,4223 card 8086,1020 rev 05 class 02,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,7), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b]
[1] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[b]
[2] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[b]
[3] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfc000000 - 0xfdffffff (0x2000000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[b]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,10), BCTRL: 0x0004 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[1] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[b]
[2] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[b]
[3] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[b]
[4] -1 0 0x0000e000 - 0x0000e0ff (0x100) IX[b]
[5] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[6] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[b]
[7] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xf6000000 - 0xfbffffff (0x6000000) MX[b]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0x50000000 - 0x57ffffff (0x8000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 3: bridge is at (2:1:0), (2,3,6), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 3 I/O range:
[0] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[1] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[b]
(II) Bus 3 prefetchable memory range:
[0] -1 0 0x50000000 - 0x53ffffff (0x4000000) MX[b]
(II) PCI-to-CardBus bridge:
(II) Bus 7: bridge is at (2:1:1), (2,7,10), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 7 I/O range:
[0] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[b]
[1] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[b]
(II) Bus 7 prefetchable memory range:
[0] -1 0 0x54000000 - 0x57ffffff (0x4000000) MX[b]
(--) PCI:*(1:0:0) ATI Technologies Inc Radeon R250 [Mobility FireGL 9000] rev 2, Mem @ 0xe8000000/27, 0xfcff0000/16, I/O @ 0xc000/8
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe7ffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xfaffd000 - 0xfaffdfff (0x1000) MX[b]
[1] -1 0 0xfaffe000 - 0xfaffffff (0x2000) MX[b]
[2] -1 0 0xf4fff400 - 0xf4fff4ff (0x100) MX[b]
[3] -1 0 0xf4fff800 - 0xf4fff9ff (0x200) MX[b]
[4] -1 0 0x58000000 - 0x580003ff (0x400) MX[b]
[5] -1 0 0xf4fffc00 - 0xf4ffffff (0x400) MX[b]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[7] -1 0 0xfcff0000 - 0xfcffffff (0x10000) MX[b](B)
[8] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[b](B)
[9] -1 0 0x0000b080 - 0x0000b0ff (0x80) IX[b]
[10] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[b]
[11] -1 0 0x0000bc40 - 0x0000bc7f (0x40) IX[b]
[12] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[b]
[13] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[b]
[14] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
[15] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
[16] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
[17] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[18] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[b]
[19] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[b]
[20] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[b]
[21] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfaffd000 - 0xfaffdfff (0x1000) MX[b]
[1] -1 0 0xfaffe000 - 0xfaffffff (0x2000) MX[b]
[2] -1 0 0xf4fff400 - 0xf4fff4ff (0x100) MX[b]
[3] -1 0 0xf4fff800 - 0xf4fff9ff (0x200) MX[b]
[4] -1 0 0x58000000 - 0x580003ff (0x400) MX[b]
[5] -1 0 0xf4fffc00 - 0xf4ffffff (0x400) MX[b]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[7] -1 0 0xfcff0000 - 0xfcffffff (0x10000) MX[b](B)
[8] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[b](B)
[9] -1 0 0x0000b080 - 0x0000b0ff (0x80) IX[b]
[10] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[b]
[11] -1 0 0x0000bc40 - 0x0000bc7f (0x40) IX[b]
[12] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[b]
[13] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[b]
[14] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
[15] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
[16] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
[17] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[18] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[b]
[19] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[b]
[20] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[b]
[21] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfaffd000 - 0xfaffdfff (0x1000) MX[b]
[5] -1 0 0xfaffe000 - 0xfaffffff (0x2000) MX[b]
[6] -1 0 0xf4fff400 - 0xf4fff4ff (0x100) MX[b]
[7] -1 0 0xf4fff800 - 0xf4fff9ff (0x200) MX[b]
[8] -1 0 0x58000000 - 0x580003ff (0x400) MX[b]
[9] -1 0 0xf4fffc00 - 0xf4ffffff (0x400) MX[b]
[10] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[11] -1 0 0xfcff0000 - 0xfcffffff (0x10000) MX[b](B)
[12] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[b](B)
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[15] -1 0 0x0000b080 - 0x0000b0ff (0x80) IX[b]
[16] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[b]
[17] -1 0 0x0000bc40 - 0x0000bc7f (0x40) IX[b]
[18] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[b]
[19] -1 0 0x0000bfa0 - 0x0000bfaf (0x10) IX[b]
[20] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
[21] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
[22] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
[23] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[24] -1 0 0x0000bf20 - 0x0000bf3f (0x20) IX[b]
[25] -1 0 0x0000bf40 - 0x0000bf5f (0x20) IX[b]
[26] -1 0 0x0000bf80 - 0x0000bf9f (0x20) IX[b]
[27] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[b](B)
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules//libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.2.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.37.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "keyboard"
(II) Loading /usr/lib/xorg/modules/input//keyboard_drv.so
(II) Module keyboard: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.7
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.37.6
(II) ATI Proprietary Linux Driver Release Identifier: LGDr8.37g1
(II) ATI Proprietary Linux Driver Build Date: May 25 2007 14:25:03
(II) ATI Proprietary Linux Driver Build Information: autobuild-rel-r6-8.37.1.1.2.3-driver-lnx-x86-x86_64-346145
(--) Assigning device section with no busID to primary device
(EE) No devices detected.
Fatal server error:
no screens found
and my /etc/X11/xorg.conf:
# Auto-generated by Archie mkxcfg
# Auto-generated by Archie mkxcfg
Section "ServerLayout"
# PS/2 Mouse not detected
# Serial Mouse not detected
Identifier "Xorg Configured"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "USB Mouse" "CorePointer"
EndSection
Section "Files"
# Additional fonts: Locale, Gimp, TTF...
# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" ""
Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "Monitor"
# Warning: This may fry old Monitors
# Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
# Default modes distilled from
# "VESA and Industry Standards and Guide for Computer Display Monitor
# Timing", version 1.0, revision 0.8, adopted September 17, 1998.
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
Identifier "Monitor0"
HorizSync 28.0 - 96.0
VertRefresh 50.0 - 75.0
ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync interlace
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
ModeLine "1800x1440" 230.0 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
ModeLine "1800x1440" 250.0 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
ModeLine "640x480" 43.2 640 680 744 848 480 481 484 509 -hsync +vsync
ModeLine "768x576" 35.0 768 792 872 976 576 577 580 597 -hsync +vsync
ModeLine "768x576" 42.9 768 800 880 992 576 577 580 601 -hsync +vsync
ModeLine "768x576" 45.5 768 808 888 1008 576 577 580 602 -hsync +vsync
ModeLine "768x576" 51.8 768 808 888 1008 576 577 580 605 -hsync +vsync
ModeLine "768x576" 62.6 768 816 896 1024 576 577 580 611 -hsync +vsync
ModeLine "800x600" 68.2 800 848 936 1072 600 601 604 636 -hsync +vsync
ModeLine "1024x768" 113.3 1024 1096 1208 1392 768 769 772 814 -hsync +vsync
ModeLine "1152x864" 81.6 1152 1216 1336 1520 864 865 868 895 -hsync +vsync
ModeLine "1152x864" 119.7 1152 1224 1352 1552 864 865 868 907 -hsync +vsync
ModeLine "1152x864" 143.5 1152 1232 1360 1568 864 865 868 915 -hsync +vsync
ModeLine "1280x960" 124.5 1280 1368 1504 1728 960 961 964 1001 -hsync +vsync
ModeLine "1280x960" 129.9 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
ModeLine "1280x960" 179.0 1280 1376 1520 1760 960 961 964 1017 -hsync +vsync
ModeLine "1280x1024" 191.0 1280 1376 1520 1760 1024 1025 1028 1085 -hsync +vsync
ModeLine "1400x1050" 122.6 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
ModeLine "1400x1050" 149.3 1400 1496 1648 1896 1050 1051 1054 1094 -hsync +vsync
ModeLine "1400x1050" 155.8 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
ModeLine "1400x1050" 179.3 1400 1504 1656 1912 1050 1051 1054 1103 -hsync +vsync
ModeLine "1400x1050" 214.4 1400 1512 1664 1928 1050 1051 1054 1112 -hsync +vsync
ModeLine "1600x1200" 280.6 1600 1728 1904 2208 1200 1201 1204 1271 -hsync +vsync
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
EndSection
Section "Screen"
Identifier "Screen0"
Device "aticonfig-Device[0]"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Last edited by DrRootabega (2007-07-03 02:58:08)

I think Flgrx simply does not support cards that are that old anymore. Use an older version or use xf86-video-ati which probably will be the better choice for you card anyways.
Last edited by kth5 (2007-07-03 01:37:02)

TS1363 Error message for my ipod touch, ipad and Nano. they all say the same thing " there has been a device detected, but cannot be identified properly. please disconnect and re-connect ipod properly". i have done all it asks, and still nothing help.

can anyone help me try to figure out whyall 3 of my devices jsut stopped beign acceptd on my itunes? ipod touch, nano 6th gen and ipad. none of them will be read on my itunes, yes i have uninstalled and re installed my itunes and plugged and unpluggd the devices and i have reset them numerous times. so what next?

Doublechecking. In the course of your troubleshooting to date, have you worked through the following documents?
iPod nano: Error message saying that iPod 'could not be identified properly'
iOS: Device detected but not identified properly on iTunes for Windows

Error message: "Remove USB Device from printer."

I have an HP Photosmart 309 a All-In-One. It is attached to my desktop computer, which utilizes the Windows XP system. I've owned the All-In-One for about three years. I do not use the All-In-One -- or this computer -- very much. (I mostly use my laptop.)
I have not made any changes to this computer and/or All-In-One in quite some time. This error message is new. I do not have a USB device attached to the printer. Even with the error message displayed, the All-In-One allows me to print, but it will not allow me to make a copy or scan. How do I make this error message go away? What's wrong with my All-In-One? Thank you for your help!

Hi DuckLakeSue,
I understand that you are getting an error message to 'Remove USB Device from printer'. Follow the steps provided in this link by the PrintDoc to determine if your wireless radio has failed.
I hope this helped, let me know.
Thank you,
I worked on behalf of HP.

DV7 - Error 03F0 - No Boot Device Detected - Passes both Memory and HDD Test

Hi there,
My DV7 will not boot up at all. When powered on, I see the HP loading screen briefly, then into "dos type" font saying "No Boot Device Detected - Error 03F0"
I have run both the memory test and hard drive test from the diagnostic menu and both come back ok.
A little more history on the Device/Problem;
2 months ago it was shutting itself off due to overheating - After a good cleaning, the temps cooled down enough that it was no longer shutting off.
I am currently in India, plugging directly into outlets (230v power) using an adapter. 10 days ago there was a small spark at the outlet leaving a very small spot on one of the prongs of the adapter. There was no power flicker, and it wasn't a surge, just almost like a bad connection sparking. This "spark" seemed to have killed my charger immediately. I used the battery until nearly dead, purchased a new charger, but when I returned and tried the new charger, it would not charge, nor power on. When plugged in, at this point, the power/charging light on the side was lit, but not on the front. I used a pin to open the CD drive, and the front light lit up, but it still would not power on.
I took it to a repair shop here in India, and they managed to get it so it would power on (not sure how), but that has only brought me to where I'm at right now with the Error. They said "It worked, and then we tested again and it didn't work and now it no work".
My current BIOS edition is F.46.
Essentially I'm wondering if I'm screwed - and if I'm not, then what can I do to trouble shoot/fix it?
P.S. Finding parts in India that are specific to my computer will be near impossible with the technology differences. Also, dealing with local techs is extremely difficult so I'll need to know
P.S.S. I just tried to power it on again to double check the accuracy of my post and it will not power on, nor can I get the CD drive open again....

Is the unit still in warranty?
Based on the description of the behavior, it does sound a hardware issue beyond the hard drive.
Was the AC adapter that was purchased an HP adapter? I know you said it is difficult to get the right parts in your area, but I want to confirm if it is an HP adapter or aftermarket.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

How do I fix a charger that has been used on an incompatible device?

I lent my charger to a friend, and when I got it back it started acting up. First it told me to reset my Ipod in Itunes, but before I could it suddenly refused to show up anywhere on my computer. It doesn't even register as a blank disk, and it doesn't show up in Itunes or My Computer. The problem isn't the Ipod itself, because once unplugged it works perfectly. But now I can't charge my Ipod OR add music to it. I assume that my friend used it on an incompatible device, and it has somehow damaged the charger itself.
Is there a way to fix this, or will I need to get a new charger?

Try posting to the iPod forums as this has nothing to do with iTunes, the forum in which you posted.

Connecting imac to macbook. "No devices detected"

I'm attempting to share screens betwee my MacBook and my iMac. I'm using a 18Pin DIGITAL SINGLE LINK DVI-I CABLE to conect them. Both devices are reading "No devices detected". Any suggestions for my next step?

The pre-2006 iMacs this forum covers do not support Target Display Mode. This Apple article shows the iMac models that do offer such support:
Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support
My 2010 iMac (pre-ThunderBolt with Mini-dispaly) connects nicely to my ThunderBolt=equipped MacBook Pro with a standard Mini DisplayPort cable. ThunderBolt connections have the same form factor and pins as mini-displayport.
If your iMac is newer than 2005---i.e., shows having an Intel processor when you do "About this Mac"---please let us know and we can ask the forums Hosts to move you the the more active forum for newer iMac models

HT5706 I just purchased an AppleTV and am trying to connect AirPlay with my mac (2012 model) In 'system preferences displays' an airplay menu is listed but it says 'no device detected'. My AppleTV and macbook are connected to the same network. Any help?

I just purchased an AppleTV and am trying to connect AirPlay with my mac (2012 model) In 'system preferences > displays' an airplay menu is listed but it says 'no device detected'. My AppleTV and macbook are connected to the same network. Any suggestions why it is not working?

Troubleshoot the network as that is likely what is causing the issue.
Also, temporarily disable the firewall on the Mac and disable IPV6 on the computer.

AirPlay mirroring issue "No Device Detected" with MBP2011 and ATV2

I upgraded my MBP (early 2011) to Mountain Lion. I have an ATV2 (v4.2.1 software). I am trying to AirPlay mirror from the MBP to the ATV but am getting a greyed out "No Device Detected" drop down. Both MBP and ATV2 are on the same network.

The issue is the "Projectors" as well (VGA projectors even DVI), Now Apple is asking all Universities, Colleges and High Schools to spend millions of Dollars to replace all their Projectors so students and professors they can install Mountain lion in order to run their presentations...Apple Mail still with BBC Bug, and many other bugs are not fixed yet because their nightmare Steve Jobs who was push on them to fix these bugs is not alive, and yes they can do anything bad to destroy Apple.
Mountain Lion is CRAP same thing as LION, Apple is doing worse and worse until Samsung will create a good machines for Microsoft, then Steve Jobs will wake up from his grave asking the bad administration of Apple why they are destroying it with such CRAP!!
check this out:
http://gizmodo.com/5782611/samsung-series-9-laptop-is-thinner-lighter-and-offici ally-more-expensive-than-the-macbook-air

Urgent problem with Recovery Manager's File backup operation: No storage device detected

I have a Pavilion g7-1070us laptop that failed to start and simply displays a blue-screen with a blinking cursor (no error message).
I could NOT get into safe-mode by hitting F8, but was able to activate the “HP recovery manager” by hitting F11.
I was trying to back-up my files before triggering the system restore. It asked me what types of files to back-up, then scanned the computer for these files and was finalizing the files for back-up; then suddenly an error message showed up saying something like "No storage device detected. Make sure the removable disc drive is connected to computer". But I have both a blank DVD sitting in the optical drive and a USB drive attached!!!!!!
I was expecting the system to ask me where to save these backed-up files but no such question was asked and this nonsense error message appeared out of nowhere. Apparently the recovery manager couldn't see my DVD or USB drive?
Can someone throw me a life-saver here? If I cannot recover my files, I cannot proceed with the system restore and I am forever stuck here!!!!!!
Please help!!!! Much appreciated!!
This question was solved.
View Solution.

The blinking cursor means the system is attempting to load Windows, but is unable to read the boot files. There are a number of causes including hardware issues. Run the tests as before to ensure the hardware is functional. I would have to run through the software repair steps only to find it is a hardware issue. Hard drives is perhaps the most common component to have issues regardless of the manufacturer.
I suspect the hard drive will pass the test and will go ahead and link to DavidPK's posts in this thread as they have the best chance to resolve the issue without losing and restoring everything. I do recommend this step at this point since two recoveries did not resolve the issue. DavidPK's solution comes in two parts, so be sure to follow both starting with the first post and moving to the second post should the first one not do the trick.
Let me know how this goes.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Installed itunes incompatible application detected

i have just installed itunes and it wont open. I have run the trouble shooter and it states 'incompatible application detected'
does anyone know what this means and if there is anything i can do to sort this out
thanks

I've not seen that error message, however Troubleshooting issues with iTunes for Windows updates may help you get iTunes installed properly.
tt2

"incompatible device" warning messages

Hi,
I get "incompatible device" warning messages on my phone/ I guess the reason is a misic device I tryed to connect. How can I stop yjose messages? Factory settings + restore didn't work...
Thanks,
Nadav.

The warning messages are fine and normal. (You may want to sellect a different build folder, looks lik eyou are building to where your apps are?)
Not sure about how you are trying to burn them (I use Toast or DVD SP itself), but in general make a new disc, then add the VIDEO_TS and AUDIO_TS folders

Unsupported wireless network device detected

Hi guys,
I had to change the motherboard of my DV9420US; I bought a new motherboard from Megabyte Trading, the part number was the same (444002-001) and they told me it was an HP piece. However, after the technician replaced it, the following error appears when booting and forces me to shut down:
"104-unsupported wireless network device detected. System halted. remove device and restart".
Can anyone tell me how to fix this problem?
It starts to be disappointing: I have already spent over 400 bucks to repair the original motherboard first and buy a new one after, with the result that my laptop does not work yet.
Thanks.
simone73
This question was solved.
View Solution.

Remove the wireless card and boot into the notebook. Once into windows you will have to hardwire the notebook into an internet connection and go to HP.com. Place your PN number in the search and go to the software and driver downloads find the BIOS header and download the most update BIOS and flash the BIOS for the notebook. Once this has completed replace the WLAN and boot it back up, should fix the issue.

Incompatible device detected printer mg6222

Similar Messages

Maybe you are looking for