Incompatible extensions were not disabled at first-run
After having success running FF4b6 on one windows XP SP3 laptop, I decided to install it on my other XP SP3 laptop. The install on laptop #2 went fine, but when b6 loaded, I noticed that extensions I knew from installing on laptop #1 were incompatible with the beta (i.e. Personas changer, Echofon) were not disabled on first-run. Instead, they seem to now be zombie extensions, with their icons hanging out in my statusbar and menus, but unable to function. Clicking on the zombie icons gets empty lists or no reaction, rather than the usual options. I am unable to manually disable the zombie extensions because the extension manager shows empty space where it should show a list of the extensions (i.e. it loads the sidebar of "find add-ons, add-ons, plugins, etc, but the inner frame that would list the contents of any of those tabs is blank). A restart of the browser didn't help.
Deleting the extensions.* files didn't help, but I think safe mode helped me get a handle on things. (I also forgot to mention the first time around that I installed the beta on a system that already had 3.x installed. Not sure if that matters.)
Here's what I've done based on/after your reply:
1. Closed beta and made sure 3.x wasn't open
2. Deleted extensions.* files
3. Opened beta. Observed that same problems persisted
4. Uninstalled beta
5. Opened 3.x. Observed that extensions were all working perfectly in that install.
6. Reinstalled beta.
7. Launched beta. At first run check for extension updates, before the browser window launched, progress bar got approximately 3/4 of the way through, then popped up an error dialog box that said, "The operation can not be completed because of an internal failure. A secure network communication has not been cleaned up correctly."
8. Observed in launched beta that same problems persisted.
9. Closed beta. Launched beta in safe mode.
10. Checked add-ons manager. Displays properly in safe mode. Disabled all add-ons that said they were incompatible with beta6.
11. Restarted beta. I now have a functional add-ons manager! Woohoo!
Thanks for your help!
Similar Messages
-
As title says.
Both Disable Office First Run on application boot and
Disable Office First Run on application boot are enabled via GPO, confirmed via gpresult /h. But then when I open the application the "Welcome to your new Office" screen shows.
I have also set the following:
Automatically receive small updates to improve reliability"
Enable Customer Experience Improvement Program"
Enable Customer Experience Improvement Program
Send Office Feedback
All to disabled.
But still on first running say Word 2013 I get the "Welcome" screen...
So what am I missing?I also have the setting 'Disable the Office Start screen for all Office applications' enabled.
This does not stop the Welcome Message.
Welcome screen:
http://blogs.technet.com/b/odsupport/archive/2012/11/14/how-to-manage-the-first-run-screens-that-appear-when-microsoft-office-2013-applications-are-first-launched.aspx
http://technet.microsoft.com/en-us/library/cc179123(v=office.15).aspx
-=-=-
Start screen:
http://www.maketecheasier.com/disable-start-screen-in-microsoft-office-2013/
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!) -
Extensions were not installed properly is this normal?
Hi, I recently did an erase and install of Snow Leopard. After the install I used Migration assistant to restore all my files. Before it completed I got about 7 messages that extensions were not installed properly and need to be reinstalled. One of them had something to do with my Canon Printer and the other was for my Elgato TV Tuner. I'm not sure what the other extensions were. Is it normal for some extensions to not restore correctly after using Migration assistant?
Those aren't available in SL as such. Just reinstall, which removes all OS components, puts down new ones, and leaves everything else in place. E&I requires you to use Disk Utility to erase and then separately to reinstall. Erasing removes everything, requiring reinstalling all 3rd-party things and resetting all preferences, a veritable PITA.
-
I am a system administrator and need a way to set a global preference to not open the Whats New and first run pages. I found the browser.startup.homepage_override.mstone preference in the user profile but want to be able to set this globally.
Use a mozilla.cfg file in the Firefox program folder to lock prefs or specify default values.
Place a file local-settings.js in the defaults\pref folder where you also find the file channel-prefs.js to specify using mozilla.cfg.
pref("general.config.filename", "mozilla.cfg");
pref("general.config.obscure_value", 0); // use this to disable the byte-shift
See:
* http://kb.mozillazine.org/Locking_preferences
You can use these functions in mozilla.cfg:
defaultPref(); // set new default value
pref(); // set pref, but allow changes in current session
lockPref(); // lock pref, disallow changes
*http://kb.mozillazine.org/browser.startup.homepage_override.mstone -
Items picked in APP proposal but were not included in payment run
Hi,
There has been a payment run, in which 4 items are excluded strangely. The proposal picked up the 4 items.
There are document numbers shown in the log against those items. But those documents were not posted. Has
any one ever come across such a situation? please guide me as to what the problem may be.it is red and the payement method is also fine . Problem is in proposal log I can see the entry for that line item .In the square box the accounting entries are visible.I mean there it qualifies for payment . A posting document number is also mentioned n proposal log. I mean if it would have picked that item for payemnt that document number would have been created. But that document number is not present in FB03. PFB how the log appears.
Posting documents additional log
Currencies in line 1: RUB / RUB Currencies in line 2: USD / ___
Document 4500001630 company code XXXX currency RUB payment method V
LIt PK Acct RA Amount Tax
001 29 0005023392 14.986,00 0,00
486,11 0,00
002 50 0011911500 14.986,00 0,00
486,11 0,00
but there is no document as 4500001630 -
Show not flagged as "first run" in listings, causing dvr headaches
As of 21 April 2014, "The Boondocks" episode that airs on Cartoon HD at 10:30pm EDT each Monday is a first run. However, the listings on my FiOS guide don't show it as such, so if I have my dvr set to record first run only, it doesn't record ANYTHING. If I eliminate the first run requirement, it schedules EVERY airing of the show to record. Please fix this. Thank you.
One area I saw a major improvement (about 2.5x faster) was in the processing of Magic Bullet effects, specifically Colorista and Looks.
If you use those effects at all (or any others that may be processed on the GPU), the extra CUDA cores really do make a significant difference. -
Flash does not register on first run
Hello,
after flash 9 is installed, I tried running a flash file on
our web site. The first time one clicks on the link to the flash
file, it brings up a new browser window, but nothing happens. If
one clicks on the refresh button, the flash file begins to run. Any
subsequent visits to this or any flash file and the flash file runs
correctly (ie, the user does not have to click the refresh button).
Is there a setting that I am missing so that this flash file will
run correctly the first time?
Most of you are thinking, "Big deal, it works... move on."
And I agree. However we have the typical users who will call the
helpdesk when the flash files does not run correctly. Our helpdesk
fields enough ID10T calls as it is. I would like to minimize those
calls as much as possible.
thanks in advance for any help, advice or suggestions.url?
--> **Adobe Certified Expert**
--> www.mudbubble.com
--> www.keyframer.com
ffriedman wrote:
> Hello,
>
> after flash 9 is installed, I tried running a flash file
on our web site. The
> first time one clicks on the link to the flash file, it
brings up a new browser
> window, but nothing happens. If one clicks on the
refresh button, the flash
> file begins to run. Any subsequent visits to this or any
flash file and the
> flash file runs correctly (ie, the user does not have to
click the refresh
> button). Is there a setting that I am missing so that
this flash file will run
> correctly the first time?
>
> Most of you are thinking, "Big deal, it works... move
on." And I agree.
> However we have the typical users who will call the
helpdesk when the flash
> files does not run correctly. Our helpdesk fields enough
ID10T calls as it is.
> I would like to minimize those calls as much as
possible.
>
> thanks in advance for any help, advice or suggestions.
> -
Office 2013 Home and Business OEM First Run screen
Hi There
We are starting to roll out office 2013 oem Home and Business our users are reporting that the first run screen get coming up every time there open an office application.
In Group Policy I've disable the First Run Movie and Office First run on application boot however the users are still getting to first run screen this is every annoying.
Any help with would be great?
Cheers,
BrettThe policy setting should work: it correctly adds bootedrtm=1 value to HKCU\Software\Policies\Microsoft\office\15.0\firstrun. But for some reason Office apps ignore it. I tried disabling the entire policy, then go through the welcome screen. After finishing
with it, office created the same value, but in another place (HKCU\Software\Microsoft\Office\15.0\FirstRun), and the screen never appeared anymore.
So to make the setting work, you have to manually create registry setting (via GPO preference) with the following data:.
[HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\FirstRun]
"BootedRTM"=dword:00000001
P.S. this was pretty easy, but did anyone look at disabling the EULA prompt? The acceptance is marked by creating a registry key for each user, but the path contains computer name :)) Therefore if all users of the PC have accepted the agreement, and you
renamed the computer, the popup comes back again. And of course group policy is impossible with such path. -
When I upgraded firefox, my skype and McAfee were disabled. Received a message that they were not compatible with the new version of firefox.
Must be the "hang at exit" problem. You already know how to do Step1; now just determine which Add-on (Extension or Plugin) is causing the problem.<br /><br />
#Stop the Firefox process:
#*[http://kb.mozillazine.org/Kill_application Mozillazine - Kill application]
#*Windows 7 users click [http://www.techrepublic.com/blog/window-on-windows/reap-the-benefits-of-windows-7s-task-manager/2576 here]
#Why Firefox may hang:
#*[http://support.mozilla.com/en-US/kb/Firefox+hangs Firefox hangs] (see Hang at exit)
#*[http://kb.mozillazine.org/Firefox_hangs Firefox hangs (Mozillazine)] (see Hang at exit and Closing Firefox properly)
#*[https://support.mozilla.com/en-US/kb/Firefox+is+already+running+but+is+not+responding Firefox is already running but is not responding]
#Use Firefox Safe Mode to find a problem with an Extension or Plugin:
#*Don't check anything when entering Safe Mode, just continue
#*If the problem does not occur in Safe Mode it is probably and Extension or Plugin causing the problem
#*See:
#**[[Safe Mode]] and [http://kb.mozillazine.org/Safe_Mode Safe Mode (Mozillazine)]
#**[http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes Troubleshooting extensions and themes]
#**[http://support.mozilla.com/en-US/kb/Troubleshooting+plugins Troubleshooting plugins]
#**[http://support.mozilla.com/en-US/kb/Basic+Troubleshooting Basic Troubleshooting]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.''' -
Greetings,
After the installation of the extension pack (local sql server and installed local) i get this warning:
Common requirement SSMA Runtime emulation components were not found on SQL Server, please check if Extension Pack is installed correctly
and
Common requirement SSMA Synchronization components were not found on SQL Server, please check if Extension Pack is installed correctly.
In the Program and Features Control panel the Feature "SSMA Extensionpack" (or similar) is installed and i see it in the startmenu.
what's wrong here, any hints?Hi A. Bloise,
Based on your description ,we need to verify that the type and version of SSMA Extension Pack. Assume that you install SSMA for Oracle Extension Pack, I recommend you check the following things.
1. Make sure that the setup file of SSMA for Oracle Extension Pack is not corrupted. You can download it from
Microsoft Download Center.
2. Make sure that your computer meets the following requirements for the SSMA for Oracle Extension Pack.
•SQL Server 2005 or higher.
•Microsoft Windows Installer 3.1 or a later version.
•Oracle Client 9.0 or a later version, and connectivity to the Oracle databases that you want to migrate.
•The SQL Server Browser service must be running during installation.
3. Make sure that the account used to install the extension pack, is a member of the sysadmin server role on the instance of SQL Server.
If this does not work, please contact with SSMA support team for further help:
[email protected]
Thanks,
Lydia Zhang -
When I first bought my ipad and connected it to my PC ten years worth of photos were downloaded ont ipad. It is now full! Cannot delete them as they were not taken with the ipad. Can anyone tell me how to delete them? Apple Store been very unhelpful.
Many thanksphotos that were synced to the pad can only be deleted by re syncing. When you do the resync, on your computer running i tunes, select the photo tab, and uncheck anything you do not want put back on your pad.
-
Class not found on the first run
The piece of code following is in my servlet. The first time (after start
WL server) I access the servlet, WL complains It can't find
ArgosClientBeans.ArgosSession and gives me a "500" error in the browser.
But if I open up the a new browser and re-run it, it would see and create
the bean fine.
What's going on? Am I missing something?
Thanks,
Tin
try {
argosSessionBean = (ArgosClientBeans.ArgosSession)
Beans.instantiate(getClass().getClassLoader(),"ArgosClientBeans.ArgosSession
} catch (Exception e) {
argosSessionBean = null;
throw new weblogic.utils.NestedRuntimeException("cannot instantiate
'ArgosClientBeans.ArgosSession'", e);
The problem was indeed related to the failure to load the plugin.
I renamed the package containing my test using the refactor command.
But the refactor did not update the plugin.xml file. This was prevent
the test plugin to load and generating the exception.
The fact that the refactoring does not update the plugin.xml is already
entered as a bug:
https://bugs.eclipse.org/bugs/show_bug.cgi?id=72296
Thanks Chris for the suggestion.
Best regards,
Cedric
Chris Senior wrote:
> I have had the same kind of exception being raised (ClassNotFoundEx)
> where the reported class is my TestCase.
> However after stepping through lots of complex Eclipse class loader code
> I found that the plugin it was dependent on (the one who's functions I
> was testing) was not loading correctly. The plugin class
> (BundleActivator) start() method was crashing with a dumb NullPointerEx.
>
> What I found irritating was that this exception (the real one) was never
> reported!? Rather Eclipse failed to start my plugin and then failed to
> load any classes from that plugin.
> This caused my test case not to be loaded because it's dependent classes
> were not correctly loaded.
>
> Normally stuff like this would get written to the log files. However in
> headless JUnit test mode I can't find the logs (the workspace mentioned
> in the launch does not exist). Are there any? If so where?
>
> Maybe you have a similar problem?
>
> - Chris
> -
When I run the Dr. Fone software it shows they are still on my iPad 2 but it costs 60-70 dollars. Is there another way to retrieve them? They were not backed up on Itunes like I thought they were. Please help!!
Recover software as you have described is pretty much your only option - keep in mind that if wait, some of the currently recoverable data may well be over-written and lost.
-
I had files stored on a hard drive that were not on my Mac. I used the hard drive for my first Time Machine back up, but it was not enough hard drive space to finish. Now those stored files are gone. Is there any way I can recover them? No, they were not part of previous Time Machine backups, and I have checked both the hard drive the documents were lost on and the new one that I now use for backups. Any suggestions would be helpful, as the lost files are old pictures that are gone forever. :[ Thanks!
1. Yes, if both drives are formatted as Mac OS Extended (Journaled).
2. Reformat the drives if needed, open the Time Machine pane of System Preferences, and remove the drive with the pictures from the list of items set to be excluded.
(110331) -
Hello experts,
I'm totally new to C#. I'm trying to modify existing code to automatically rename a file if exists. I found a solution online as follows:
string[] allFiles = Directory.GetFiles(folderPath).Select(filename => Path.GetFileNameWithoutExtension(filename)).ToArray();
string tempFileName = fileName;
int count = 1;
while (allFiles.Contains(tempFileName ))
tempFileName = String.Format("{0} ({1})", fileName, count++);
output = Path.Combine(folderPath, tempFileName );
string fullPath=output + ".xml";
However, it gives the following compilation errors
for the Select and Contain methods respectively.:
'System.Array' does not contain a definition for 'Select' and no extension method 'Select' accepting a first argument of type 'System.Array' could be found
(are you missing a using directive or an assembly reference?)
'System.Array' does not contain a definition for 'Contains' and no extension method 'Contains' accepting a first argument of type 'System.Array' could be
found (are you missing a using directive or an assembly reference?)
I googled on these errors, and people suggested to add using System.Linq;
I did, but the errors persist.
Any help and information is greatly appreciated.
P. S. Here are the using clauses I have:
using System;
using System.Data;
using System.Windows.Forms;
using System.IO;
using System.Collections.Generic;
using System.Text;
using System.Linq;Besides your issue with System.Core, you also have a problem with the logic of our code, particularly your variables. It is confusing what your variables represent. You have an infinite loop, so the last section of code is never reached. Take a look
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.IO;
namespace consAppFileManipulation
class Program
static void Main(string[] args)
string fullPath = @"c:\temp\trace.log";
string folderPath = @"c:\temp\";
string fileName = "trace.log";
string output = "";
string fileNameOnly = Path.GetFileNameWithoutExtension(fullPath);
string extension = Path.GetExtension(fullPath);
string path = Path.GetDirectoryName(fullPath);
string newFullPath = fullPath;
string[] allFiles = Directory.GetFiles(folderPath).Select(filename => Path.GetFileNameWithoutExtension(filename)).ToArray();
string tempFileName = fileName;
int count = 1;
//THIS IS AN INFINITE LOOP
while (allFiles.Contains(fileNameOnly))
tempFileName = String.Format("{0} ({1})", fileName, count++);
//THIS CODE IS NEVER REACHED
output = Path.Combine(folderPath, tempFileName);
fullPath = output + ".xml";
//string fullPath = output + ".xml";
UML, then code
Maybe you are looking for
-
SharePoint 2013 - random authentication issue where users are suddenly anonymous
Hi, I've banged my head for too long now on this issue, so I'm hoping anyone here can shed some light on it. We're running on April 2013 CU but the problem has existed since RTM. The issue is that some users (all of this random) can't access the site
-
hi how to import *.dmp file Through Oracle SQL Developer (3.2.20.09) ? how to do it ? thanks
-
What version of Adobe Media Server would fit our needs?
Hello. We are considering doing HTTP video streaming on our intranet. We have approximately 500 employees and would want to be able to stream approximately 10 - 50 one-way connections at one time. What version of Adobe Media Server would you recommen
-
Assembly error SAP ESS Component concurrency-lock-denied
Hi, we are always getting the following exception while assembling SAP-ESS Component in our NWDI: (Step: Repository-export) 20101213121125 Info :PropagationList CMS_sap.com_SAP_ESS_26_4da649762a8311dfca0e005056942f98 added to export. 20101213121125
-
When i use vpn online movies like youtube still loading after even i closed firefox window
i tested many things to know this things ! totally when i use vpn connection (pptp) youtube movies when they loaded 50% i close firefox window but my firewall still shows me a program, connection or .... that using all of my internet bandwidth i test