Incompatible Format question

Thanks in advance for any help. My problem is that I have a .mov file that I'm trying to put into DVD studio pro and I keep getting the "incompatible format" message. I don't know why though.
Here's how I made the .mov file though. (By the way, this for work in case you are wondering). I took a DVD of my boss speaking and ripped it and then exported it using MPEG Streamclip to a .mp4 file. I took that into FCP and added some graphics at the beginning and end from Motion (exported to .mov files though) and some sounds and then exported all of it to a .mov file. The odd thing though was that these exported super fast compared to how long it usually takes (which I'm thinking is the problem). I have two video and both are around an hour each, and both get the same message. But when exporting them, they took less than 15 minutes to export, where as I usually have to wait longer for videos that length. Below are the format stats of the 2 .mov files. MIght help. Again, thanks for any help.
Video 1 Format: H.264 Decoder, 640 x 480, Millions
16-bit Integer (Little Endian), Stereo, 48.000 kHz
Video 2 Format: H.264 Decoder, 640 x 480, Millions
16-bit Integer (Little Endian), Stereo, 48.000 kHz

crestfalleen wrote:
I am one of those souls.
Any luck using QuickTime Player to convert your files into DV-NTSC media?
To spell it out, with your h.264 file open in QT, do a *File > Export* and select +QT Movie+ (in case that's not already pre-select) from the Export drop-down. Hit the Options button, then the Settings button under Video area to use DV-NTSC as the Compression Type. You'll also probably be best off adjusting the Size to *NTSC 720x480 4:3* as well.
This is just to speed you along your way. If you were to start from scratch, I'd listen to Russ - use Demux in MPEG Streamclip to produce a DV-NTSC file from the get-go.

Similar Messages

Can't open project - incompatible format???

I just did a project on DVD studio pro, and ultimately made a disk image of my final DVD (standard procedure for me.) Anyway, I opened up the disk image and was checking it out on the DVD player (on my Mac) and realized I forgot to set one of the buttons. Not a huge deal, I can just go back to the project, set it, and redo the image, right? Yeah, not the case. When I try to open the project an error comes up telling me that the project cannot be opened, that it’s an incompatible formate???? I just had the project open 5 minutes ago, and now it wont’ open??? Any ideas? It shows it loading the project up, and this happens as the end of initializing the assets.
I could understand if there was something with one of the assets it didn’t like, but that should have been a problem when I tried to import the asset from the start. I got all the way to a finished disk.

Have you recently reinstalled FCE and forgotten to update it?

Dts and ac3 - incompatible format

I have been given some pre-encoded dts and ac3 (5.1) files that were encoded on a windows audio encoding system. DVDSP gives me the "incompatible format" message and cannot import them. I suspect the data itself is fine, and there is problem with the file headers on the windows-created files.
Anyone know of a way I can force the files to be readable to DVDSP from my mac, or any tips I can give the person doing the encoding on making the files compatible with DVDSP?
the extension on the dts files is .dtshd
I am able to open the ac3's with VLC, but not with any apple programs.
Any help would be appreciated.

One of the reasons for non-importing AC-3 file could be wrong parameters. Have you specified your requirements for AC-3 files (bit-rate, metadata, etc). Can you see the file parameters in VLC?
DTS files used to come in two flavors, before HD-DVD and Blu-Ray were invented: padded dts file (.dts) and compact dts file (.cpt). The new HD formats pushed the envelope pretty high, and extension such as dtshd could signify exactly that: DTS-HD file which is not compatible with SD DVD specs.
DVD SP can import only compact dts files with .cpt extension, and it is very finicky about parameters.
For example earlier version of Minnetonka's DTS DVD encoder, copies of which can be found on the web, have a bug that prevents DVD SP from importing the files produced by it.
You should contact the audio house and ask them about procedures and parameters used to create the problematic files

Landscape formatting question

Can anyone help me with a formatting question? I have a number of PDFs that are landscape format. Every time I open them they default to portrait, even when I change orientation in page set-up and re-save...

You are only changing the view, not the pdf. Use the Rotate command in the Document menu, not the view menu.

Locale Formatting question

Locale Formatting question
In the preceding code the number 50 represent currency.
The output of NumberFormat is 50 with the local symbol
The output of DecimalFormat is 50.00 without the local symbol
The question is how to show 50.00 with the local symbol ???
import java.text.*;
import java.math.BigDecimal;
public class LocalFormating {
public static void main(String[] args) {
NumberFormat nf = NumberFormat.getCurrencyInstance();
DecimalFormat decfs = new DecimalFormat("#,##0.00");
BigDecimal anumb = new BigDecimal(50);
String temp = nf.format(anumb);
System.out.println("local anumb = " +temp);
String temp2 = decfs.format(anumb);
System.out.println("Decimal format anumb = " +temp2);

Locale Formatting question
In the preceding code the number 50 represent currency.
The output of NumberFormat is 50 with the local symbol
The output of DecimalFormat is 50.00 without the local symbol
The question is how to show 50.00 with the local symbol ???
import java.text.*;
import java.math.BigDecimal;
public class LocalFormating {
public static void main(String[] args) {
NumberFormat nf = NumberFormat.getCurrencyInstance();
DecimalFormat decfs = new DecimalFormat("#,##0.00");
BigDecimal anumb = new BigDecimal(50);
String temp = nf.format(anumb);
System.out.println("local anumb = " +temp);
String temp2 = decfs.format(anumb);
System.out.println("Decimal format anumb = " +temp2);

Incompatible format all the sudden

I am getting "incompatible format" all the sudden when trying to import into Studio Pro. I have tried many different compressions using compressor 3 but I getting the same result. Any help would be greatly appreciated.
Thanks!

Hi
Probably you are trying to import HD assets in SD projects or vice versa.
Hope that helps !
Alberto

Cascading lookup format questions

Hi everyone,
I have a couple of questions regarding formatting the cascading look up fields. I have a list that filters classes and mnemonics by educator which works fine however on the entry form, when the "Educators" drop down menu is changed,
a secondary description box appears. The question is, how do I get rid of that secondary description box?
The second formatting question is that when I have filled out the form, on the edit entry form, there is a hyperlink to the list that the cascading lookup is using as a reference. How do I get rid of that link? See image 002 below

It's not easy to understand the question, please attach the image here.
if you mean to achieve a cascade lookup in SharePoint new/edit form, after selecting one column, the cascaded column below will show with filtered value, otherwise, the column is hidden, you may consider to use JavaScript/JQuery to show/hide the second column,
following is an article about how to use cascaded lookup in SharePoint:
http://www.sharepointboris.net/js/spcd/
Qiao Wei <br/> My blog:http://blog.goobol.com

Export AVI video trunked and "incompatible format" comes back with DSP

Hi all,
I'm trying to export a my digital video created with iMovie in AVI format, but the final video is trunked after 7 min. At the same time I tried to generate the .mov file and import it into DVD Studio Pro 4, but an "Incompatible format" comes me back. Help me!
Thanx a lot.

One thing to try is deleting preferences.
Home-library-preferences-imovie preferences
also, sometimes people start running out of hard drive space...is there enough room left?
Hugh

Cannot write medium - incompatible format

Keep getting this message "the recording device reported the not ready error. Cannot write medium - incompatible format (0x30, 0x05)
Any suggestions?

If you more details on the project, the burner you are using, how you are writing the project, the DVD-R (is that what it is?), the set up of your computer (says PowerMac 7.3? and which OS of 10.4) it can help narrow it down
Also some threads
http://discussions.apple.com/thread.jspa?messageID=1090247&#1090247
http://discussions.apple.com/thread.jspa?messageID=1192904&#1192904
http://discussions.apple.com/thread.jspa?messageID=1087561&#1087561

Incompatible format (0x30, 0x05)

Hey everyone. I'm really at a loss here. I'm using FCP 4.5 and compressor 1.2.1 for my video files. I've tried several encoding codecs, iDVD, DVDSP and even a basic drag and drop - using the finder - to burn DVDs and I get the same error message EVERYTIME: incompatible format (0x30, 0x05)
I've tried sony, memorex and fujifilm dvd-r's, all compatible w/ 1x to 16x drives. My drive is a
SONY DVD RW DW-U21A:
Manufacturer: SONY
Model: SONY DVD RW DW-U21A
Revision: AADB
Serial Number:
Drive Type: CD-RW/DVD-RW
Disc Burning: Apple Supported/Shipped
Removable Media: Yes
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
I've got plenty of thru-put, drive space and updated firmware. I've tried lowering the write speed (all the way down to 2x), lowering the data rate, using mpeg-1, mpeg-2, DV NTSC, NOTHING WORKS!!! There has to be something I'm missing. The fact that I get the same error code using all 3 burning methods (DVDSP, iDVD, finder) makes me think the problem is either in the configurations of FCP or compressor , or it's a hardware issue. I have projects that I need to get on disc ASAP and am completely stumped. Any help would be GREATLY appreciated. Thanks
powermac g5 Mac OS X (10.3.9)

Tried building to the drive - drag and drop quick burn right? No dice. My burner handles cds no problem. But it doesn't work in the finder, in DVDSP or iDVD. A buddy told me there's a hardware refresher button on the logic board. I'll try that and if it doesn't work I'm taking it into the mac store.
Has anyone ever heard of a burner that can burn cds and not dvds (as a glitch, please no sarcasm guys) ? Mine is SUPPOSED to be set up to do both. Thanks
powermac g5 Mac OS X (10.3.9)

File import to DVD Studio Pro-incompatible format

hallo,
i made from an final cut studio project with DVCPRO HD 720 50p material via compressor an new compressed file with ".mov" suffix.
the attitude in compressor was:
H.264 10,3 Mbits/s for HD DVD
the film is about 20 minutes
also after repeated tries it dosn't work.
i get the announcement:
"incompatible format" when i try the import
what to do?
thank you for answering

Are you trying to make an SD DVD or an HD DVD (which only play on Macs, and the now obsolete HD DVD players)?
If you are trying to make an SD DVD, then you are using the wrong format. Export out of FCP using the DVCPRO codec. Bring that into Compressor and make a MPEG-2 for your video and a AC3 for your audio. Bring those files into DVD SP.

"Incompatible format" with DVD Studio Pro

I'm trying to put together a DVD with DVD Studio Pro. When I transfer the movie into the "track 1" area in DVD Studio it says "Incompatible format". I've tried going under "preferences", then under the "project" tab and selecting both HD DVD and SD DVD but neither setting makes a difference, it still will not accept the clip. I've gone into the "General" tab under preferences and tried setting the resolution to the same as the movie file and still nothing. Does anybody have any suggestions as to what might be going wrong?
Just to let you know as well, I have a smaller file that I've tried inserting into DVD Studio and it seems to work fine. Both this smaller file(891MB) and the actual movie that I'm trying to add(22.1GB) have the exact same attributes when checked in QuickTime using "command + i"
Here's the info for the movie file I'm trying to add:
Self contained QuickTime file from Final Cut that is about 2 hours long.
Apple HDV 1080i60, 1440 x 1080 (1888 x 1062), Millions
16-bit Integer (Little Endian), Stereo, 48.000 kHz
Normal Size:1920x1080 Current Size:1920x1080 (actual)
Here's the info for the small video that works:
Self contained QuickTime file from Final Cut that is about 4 minutes and 39 seconds long
Apple HDV 1080i60, 1440 x 1080 (1888 x 1062), Millions
16-bit Integer (Little Endian), Stereo, 48.000 kHz
Normal Size:1920x1080 Current Size:1920x1080 (actual)
Any help is appreciated!

Your best bet is to encode the video outside of DVD SP to an m2v stream. Are you making a SD DVD or HD DVD?

"Incompatible format" when importing H.264 NTSC .mov file

DVD Studio Pro 4.0.3. G5. OS X 10.4.11.
Created a new SD DVD project, NTSC. Tried to import a .mov file: H.264, AAC movie file: H.264 Decoder, 320 x 240, Millions, AAC, Stereo (L R), 32.000 kHz. FPS: 15.
Message: "Incompatible format". Exported to PCM audio, no dice. Exported to DV/DVCPRO and PCM audio, imported OK. Any suggestions? Thanks.
Bob

DVDSP only accepts a fairly narrow range of file types when it comes to importing.
For video, that means files that are in editing codecs (like DV/DVCPro), if you want DVDSP's internal encoder to process them. Otherwise, if you want to encode elsewhere, you must present it with either an MPEG-2 file (usually preferable) or an MPEG-1 file. Since your source file is smaller-than-the-norm frame size, MPEG-1 would have worked for you. Though DVDSP, only accepts 23.98 or 29.97 frame rates in NTSC land. (of course, for PAL projects, 25 fps is cool)
In terms of audio, .aiff or .ac3 are acceptable.

Mpeg incompatible format!!!

Ok so i cant work this out.....
I have created a sd mpeg-2 in compressor and i cant seem to import it into dvd studio it comes up with incompatible format.... uh...why?
Please help

dunno if this helps but this is my summary:-
File Extension: mpeg
Estimated file size: 2.36 GB/hour of source
Type: MPEG-2 program stream
Video Encoder
Format: M2V
Width: 720
Height: 576
Pixel aspect ratio: PAL CCIR 601
Crop: None
Padding: None
Frame rate: (100% of source)
Frame Controls: Automatically selected: Off
Start timecode from source
Aspect ratio: 4:3
Field dominance: Automatic
Average data rate: 5 (Mbps)
1 Pass VBR enabled
Maximum data rate: 7.5 (Mbps)
High quality
Best motion estimation
Closed GOP Size: 1/2 second, Structure: IBBP
Audio Encoder
Format: MPEG
Sample Rate: 48.000kHz
Channels: 2
Bits Per Sample: 16
I had SD clicked for sure in DVDSP

Import Assets Incompatible Format - Apple HDV 1080i60

Isn't HDV 1080i60 a format the DVDSP 4.1.2 can import?
I recorded an event in a Gym in HDV with my Canon HV20, uploaded into FCP5 via HDV with the sequence presets using HDV-1080i60 compression.
After adding markers and markers I rendered it, and export>quicktime settings>current settings. When I tried to drag it into DVDSP (compressor will not connect to batch after the last quicktime update so that is out until I reinstall it) DVDSP gave me the Import Assets Incompatible Format warning box.
Any insight is appreciated.
I did go back to FCP and export it as DV NTSC 58kHz and it imported fine.
I guess I just don't know what will give me the best looking DVD from HDV: Change using export via FCP or Compressor or DVDSP - or do they all use the same QT engine to convert?
Thanks for your input.

HD DVD is not blu-ray, just an FYI, so not sure if you are asking for blu-ray or not?
Anyway with FCP 7 you have the ability to create limited blu-ray discs onto regular DVD-R/+R (and also the same for HD DVD via DVD SP) that will play in HD DVD Players (if you happen to have one and burn the HD DVD flavor) or blu-ray players.
By limited (more so on blu-ray side) think of it is a simple menu that has a limited amount of room compared to a full blown blu-ray disc. In other words to put a short thing of 15-20 minutes onto a disc that will work without extra equipment, which can suffice for many things.
Or are you meaning to do something more full blown blu-ray? If the later, do a search for blu ray in the box over there -> in the DVD SP forum, lots of options and methods are discussed.
You can look at a burner like this [one from OWC|http://eshop.macsales.com/item/Other%20World%20Computing/MRF8UEBDW8T> which includes Toast and prices are definately becoming more reasonable than they were not too long ago and the media is starting to drop.
Like most things prices will continue to go down some more, so keep that in mind as to whether it is time to buy, or just go with the limited use the system you have can currently do.

Incompatible Format question

Similar Messages

Maybe you are looking for