Incompatible tunnel type in BGP update

PDT: %MDT-4-INCOMPATIBLE_TUNNEL_TYPE: Incompatible tunnel type in BGP update router_id:192.168.201.10 RD:1200:12 type:1; local tunnel_type:0
added a new PE. double checked configuration and it looks same as other PE.

What range you are using for the SSM? Probably a good idea to specify the range if you using outside the default SSM range. Sample config below - modify the range as per your assignments. Cisco IOS software allows SSM configuration for an arbitrary subset of the IP multicast address range 224.0.0.0 through 239.255.255.255.
ip pim ssm range SSM-Range
ip access-list standard SSM-Range
permit 224.0.0.0 0.255.255.255

Similar Messages

Billing type is not updating in COPA table

HI Gurus
Billing type is not updating for few billing documents in ECC COPA table CE11000 but for few documents billing type is updating correctly in ECC COPA table CE1100
Example 1 for billing document 10351144 billing type is not updating in ECC COPA table CE11000 billing type ZDN
Example 2 for billing document 10354965 billing type is updating in ECC COPA table CE11000
Billing type is same for the both billing documents but its updating for one document and it is not updating for another document
Please help me to find out the rout cause

hi, can your replay the problem in your system?
if so , I suggest you to set a user breakpoint in ERP function BAPI_ACC_DOCUMENT_POST, (the user need to use the Middleware user not your foreground login user)
And when billing document inbound to ERP, SAP will call the function. then you can check if the CO-PA fields has been filled correctly or not.

How to stop non statistical condition type value from updating total amount

Gurus,
Can any body explain me how to do following setting,
How to Stop non statistical condition type value from updating Total Amount
Regards,
Sai

Dear Sai,
You need to make that condition type as Statistical one
Go to SPRO - Sales and Distr. - Basic Functions - Pricing - Define and Assign Pricing Proc - Maintain Pricing Proc - Control Date
Select the proc. - select the condition type and activate the check box Statistical
This will show the amount of the condition but will not consider for the net value calculation
Hope this will help you
regards,
Sagar

Set tunnel type = GRE in ISE v1.2?

Hi.
I have a setup with Aerohive AP's and ISE as radius-server.
To use User Profiles in Aerohive, I need ISE to send some information back to the Access point via an Authorization Profile, namely this:
Tunnel-Private-Group-ID=(4095)
Tunnel-Type=GRE
Tunnel-Medium-Type=IP
It's pretty straight forward to set it up, but as soon as I click save, and then goes back in to the profile, the Tunnel-type has changed to VLAN.
A quick look into the logs confirm that too:
Tunnel-Type
(tag=1) VLAN
Tunnel-Medium-Type
(tag=1) 802
Tunnel-Private-Group-ID
(tag=1) 4095
With the result that the User Profile assignment is not working.
I have used this in ACS v5 for years, and it works like a charm.
But now I looking to move from ACS to ISE, but I need this to be in working order first.
Any ideas?
Thank you.

How did you go about setting the Authorization Profile?
If you go to Policy > Policy Elements > Results then choose Results > Authorization > Authorization Profiles from the menu on the left.
Click the +Add button
I created a tunnel with the name AEROHIVE_TUNNEL and the Access Type set to ACCESS_ACCEPT
Choose the DACL to which the policy should be applied and set the Advanced Attributes.
As you can see in the screenshot the Radius:Tunnel-Private-Group-ID = IdentityGroup:Name can be changed manually by deleting the word Name and replacing it with 4095:
You can also change the Tag ID:
Once you submit, you'll receive confirmation of the save. Leave that screen and go back in to confirm the Authorization Profile:
Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question. Otherwise, feel free to post follow-up questions.
Charles Moreton

Incompatible data types in combination

Hi All,
i am getting this error incompatible data types in combination when i run my interface. my interface extract data from table and loads into file.it was running fine but dun know why its giving this error now during insert rows step.

You're essentially trying assign a void value to a double... that's what the error is telling you.
public static void showKilometers(double m)
double kilos;
kilos = m * 0.001;
JOptionPane.showMessageDialog(null,(m) + " Meters is " +
(kilos) + " Kilometers.");
} The reason this doesn't work is because in order to assign the value of a function to a variable, the function must actually return a value.
Try this:
public static double showKilometers(double m)
double kilos;
kilos = m * 0.001;
JOptionPane.showMessageDialog(null,(m) + " Meters is " +
(kilos) + " Kilometers.");
return kilos;
} Do the same thing for your other conversions and make sure the function and return types are correct.
Edit: Ah, looking back over the program, you weren't actually trying to assign variables; rather, you were just wanting to display them. My bad, I only looked at the narrow scope of the error and wondered why you wanted message dialogs. =)
But, hopefully my description of that error will help you understand a few things.
Edited by: Thok on Oct 10, 2007 2:40 PM

Error -1074396077 (IMAQ Vision: Incompatible image type) after running IMAQ Mask

I am attempting to process color picture of pellet. I want to exclude any particle that touches the edges of the color images. I created mask from original image and used this mask on the original color image to retain only the color particles that don't touch the boundary. The error occured when I ran the IMAQ Mask. The error message is “Error -1074396077 (IMAQ Vision: Incompatible image type)”. How can I fix it ?
I have picture and program as attached.
Attachments:
color sorter 01f.vi ‏87 KB
Red01a1.jpg ‏30 KB

Hi XuanThuy,
The IMAQ Cast function is part of the Vision Development Module (VDM), under the Image Management Palette, as indicated by this document: http://zone.ni.com/reference/en-XX/help/370281P-01/imaqvision/imaq_cast_image/. If you can't locate it and you indeed have the VDM, there may be an issue with the installation of this module. A similar issue has been encountered and resolved in this forum post: http://forums.ni.com/t5/Machine-Vision/can-t-find-IMAQ-cast-image-vi/td-p/340157. What version of the vision software are you using?

Debug ip bgp update is cpu-intensive

Hi,
I would like to know if the command in the subject is cpu-intensive or not.
Thank you very much.
Paolo

debugs always use cpu to one extent or another.
debug of bgp updates should not be too impacting unless you continually have tons of updates.
it should be ok to run during production hours if you have very few bgp changes/updates occuring.

SOM expression - resolved to an incompatible node type of 'dataValue'

Hi experts,
i am working on wd abap interactive forms, i have taken a table on pdf and provided binding.. like data node is with data[*] and rest of the fields are maped preperly.
by default on initialization i fill some data this popup message is not coming..
if there is no data this message appears, when i fill some data manually and try to fetch i am not getting the records.
please let me know how to get rid of this message.
The SOM expression '$record.Z_TY_SFLIGHT_LIGHTS' for the dataRef specified
on field 'Table1', resolved to an incompatible node type of 'dataValue'.
Thanks,
Mahesh.Gattu

If i maintain the cardinality of the table node 1..n it is not giving me the SOM popup.
instead of 0..n.
Thanks,
Mahesh.Gattu

HT1338 6 point grey on grey type in Software update

Do any other non-teengers have any trouble seeing the 6 point grey on grey type in Software update?? Come on Apple, make it readable please

Always clone your startup drive before doing any updates or upgrades. I clone my startup drive to a second internal drive using carbon copy cloner so I'm able to get back to work immediately if any problems occur.

BGP Update Messages

Can a bgp UPDATE message carry more than a single prefix ? I have read a lot of text about this ( Halabi, Doyle, RFC 1771 ) but I think the wording that this literature is never clear to me about what they are exactly saying.
below is a quote from RFC 1771
" An UPDATE message can advertise at most one route, which may be
described by several path attributes. All path attributes contained
in a given UPDATE messages apply to the destinations carried in the
Network Layer Reachability Information field of the UPDATE message. "
In the wording of this RFC, is " route " same as prefix ?
Here is what Doyle says
" The Update message, whose format is shown in Figure 2-45, is used to advertise a single feasible route to a peer, or to withdraw multiple unfeasible routes, or both. "
And here is what Odom says in the Official CCIE R&S Guide
" The central concept in an individual Update message is the set of PAs. Then, all the prefixes (NLRIs) that share the exact same set of PAs and PA values are included at the end of the Update message. If a router needs to advertise a set of NLRIs, and each NLRI has a different setting for at least one PA, then separate Update messages will be required for each NLRI "
Anyone has the time to authoritatively explain this to me ?
Herbert

Hello Herbert,
the RFC is always right. ;-)
There is one prefix (network/mask) in a single BGP Update message. There can be, however, several BGP update messages in a single TCP segment. This is why one shoud always enable path MTU discovery on a BGP speaker ( ip tcp path-mtu-discovery).
While writing this I am looking at a sniffer trace from an MPLS PE router exchanging BGP updates. So I am pretty sure, that a Cisco PE (3640 with IOS 12.3T) will do exactly, what the RFC tells you.
Hope this helps! Please rate all posts.
Regards, Martin

Valuation Type Price not updating in the PR

We are using two valuation types for a material.
Valuation type(New)in Material master has some price value in it Ex: 50 dollars per unit and Valuation type (Expense) is with Zero value.
While creating a Purchase Requisition,default valuation type(New) gets updated and if we change the valuation type to (Expense) in the PR,there is no change in the Price.Actually the price should be Zero as defined in Material Master.
Why the price is not updating ????
Apperciating ur immediate response.

Hi,
During PR creation, Valuation Price is to be maintained derogatorily and generally it gets defaulted from Material Master.
Once the Valuation Type "NEW" is getting defaulted in PR then it is copying the price from this and after changing the valuation type it doesn't change the Price since the valuation price obligation has already been fulfilled.
So if you will stop defaulting the Valuation Type "NEW" for the material then it will ask Valuation type in PR and then it will pick up the price for that Valuation type.
Default Valuation Type is maintained in OMWC
Go to OMWC, there click on "Global Categories", here position cursor on the Valuation category (Maintained for Material Master) and click on "Change" button, here check have you entered any Valuation type "NEW" in field "Default: val.type ext.procure."

How to Keep Content Types Current with Updated Data

Let’s say that I have four content types—content type 1, content type 2, content type 3, and content type 4—all based on the same list, say list A.
Each content type has its own workflow.
When the workflow for content type 1 is completed, the data is saved to an individual item, say item Z, in a separate list, list B.
When the workflow for content type 2 is completed, the data is saved to the same item (item Z) in list B. The reason that there are two lists is that the creation of content types causes new items to be created, but the each
new item must reference data from the previous item. That means that data has to be copied from the first item to the second item. But what happens to the data in the second item when data from the first item is changed? The solution is to have a single item
in another list to which all content types write their data.
What I need to know is how can all the content types retrieve data from list B when those content types are based on list A? For example, let's say that content type 3 uses data originally input through content type 1. As the
user inputs and saves data through content type 3 he sees data that had been originally input through content type 1. Another user then accesses content type 1 to update and save data through it. When content type 3 is opened again that user will not see the
updated data entered through content type 1 because it is tied to a different item. The solution seems to be for all content types to save their data to the same item in another list. But then how can those content types be designed so that when they open
they show updated data from List B when those content types are based on List A?
Other applications have the notion of a folder containing all the up-to-date data fields. Another way to look at this problem is to state what SharePoint 2007 does to mimic the notion of a folder.

Thanks for responding, but I don't think that the solution provided solves my problem. What you described will keep the item in List B in sync with the changes made to List A. However, the content types from List A will not be in sync when they are opened
from List A. Say content type 1 makes changes to various fields. When content type 3 opens it displays some of the fields that content type 1 changed; however, content type 3 and content type 1 by definition display different items--and those items are not
in sync. Either I have to copy the updated item from List B back to the related items in List A or there has to be another solution.
Is it possible to have a workflow update all the items in a list based on a key field whenever changes are made to that item. Say content types 1, 2, 3, and 4 already exist and each refers to a different item in List A, but they are "tied" together
by a key field. When content type 1 is reopened and changes are made, is it possible to iterate over the items in a list to find other items whose key field matches the key field from content type 1? If so, then when matching items are found the fields in
them can be updated by the same changes made to content type 1.
If this latter scenario is possible, how is that iteration set up in a SharePoint 2007 workflow? Thanks again.

4.7.5.1.83.3.37 (Type B) firmware update causing p...

It seems as though everything is pointing at me to get a new router and ditch the BT home Hub 2.0
I've had another problem crop up since I was last here.
I have followed the instructions that were given to me in my previous thread and ensured that nobody touches the router while we try to get our connection taken off the "fixed rate" thing.
Things were going good and I had over 2 full days of connection time. But shortly after the 2nd day I happened to notice the upgrade light on the router was light up. After it went out I logged into the router out of curiousity and confirmed that it had updated right then with a new firmware:
Current firmware
4.7.5.1.83.3.37 (Type B)
Last updated
03/07/12
Later on I then noticed that my laptop was no longer connected and when selecting the option to connect to my wireless network I see that the wireless names had changed to "BTWiFi-with-FON" and "BTWifi". My main wireless connection was unchanged.
Since this upgrade I have found that my connection wo'nt go a day without ending up restarting. Also, my connection to my wireless seems to disconnect me if I sit idle for too long (this is a guess as I am not entirely sure)
Has anybody else had this problem or received this firmware update?
I try to make sure that my internet is not restarted only to have BT push out an update that ensures that it keeps happening...UGH

BT are updatig the hub's firmware so that the ssids for BTFON and BTOpenzone-H are changed to the new brand name (BTWifi). You will now see BTWifi-with-FON and BTWifi. Your personal wifi, eg BTHub3-XXXX or BTHomeHub2-XXXX will stay the same.
With your line being 2.9km long the firmware upgrade automatically restarts the router, which could have caused a slight change in noise margin but after 3+days should sort it self out.
You can check your status on BTWifi (BTFon) by visiting https://www.bt.com/wifi/secure/index.do
You can also opt back in and then back out again which will hopefully get ride of BTWifi (might take a few days for changes to apply)
cheers,
James
jac_95 | BT.com Help Site | BT Service Status
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Try a Search
See if someone in the community had the same problem and how they got it resolved.

How does set metric-type internal (bgp) work?

i can't realise how the command "set metric-type internal " to work.
bgp announce to ebgp use the igp next-hop metric as the med.
the igp means only isis?
does ospf use it ?
will you tell me how to use it ? give me an example . thinks

Hi,
This command can be used into two different contexts:
1- Redistribution into ISIS
When you are redistributing routes into ISIS, you have the choice to set the metric-type as internal (between 0 and 64) or external (between 65 and 128)
Internal metric are always prefer over external metric
2- Set the MED to reflect IGP cost to the NH on eBGP updates
You are receiving an iBGP update and before sending it to your eBGP peers, you want the MED for that prefix set to your IGP cost to the iBGP peer announcing this prefix.
In this case the IGP can be anything.
This command is not necessary if you are redistributing the route into BGP directly instead of receiving them from iBGP. In such case, the MED reflects by default the IGP cost of the redistributed prefix.
HTH
Laurent.

I am trying to reapply for the FAFSA online for school but when I click the "start now" button it takes me to a page which says I have an incompatible browser and need to update my Firefox.

I have the latest version and I tried updating anyways, but it still won't let me access the page to fill it out. This is what it says "An Incompatible Browser Has Been Detected Your Web browser is not supported by our Web site. You must use a Compliant Web Browser - Standard* to view our site properly. We recommend you upgrade to the latest version of your browser according to your Operating System. "
This is what it suggests I do, and I did update but still isn't working.
Supported Mozilla Firefox browsers:
Windows XP - Mozilla Firefox 3.5.x and 3.6.x
Windows Vista - Mozilla Firefox 3.5.x and 3.6.x
Windows 7 - Mozilla Firefox 3.5.x and 3.6.x
Macintosh Operating System 10.5 - Mozilla Firefox 3.5.x and 3.6.x
Macintosh Operating System 10.4 - Mozilla Firefox 3.6
Instructions for upgrading Mozilla Firefox browser:
Click this link to access http://www.mozilla.com/firefox.
Click the "Download Firefox" button.
We recommend you use your browser's default settings to safeguard your application information and ensure that the Web site works properly.
....I need to have it filled out and posted by 9/1/11 so if i could get into the website it would be a great help. It takes a long time or I would go do it on another comp at the library or something. Any help would be appreciated:) thankyou

http://portableapps.com/apps/internet/firefox_portable/localization#legacy36

Incompatible tunnel type in BGP update

Similar Messages

Maybe you are looking for