Incompatible with ASUS Padfone
I am using ASUS Padfone and it can as a tablet also. I would like to purchase this apps but unfortunely Googly plays show that it incompatible with the device. Is there anyway I can purchase the apps?
Air on intel x86 android is causing a good amount of grief to a lot of folks. Please vote !! https://bugbase.adobe.com/index.cfm?event=bug&id=3648268
Similar Messages
-
Can't pair SW2 with Asus Padfone 2
As the title said really. I have done everything as the instructed. Yet I can't even make a pair happen via bluetooth. All it ever show up is "Can't comunicate with SmartWatch 2"
any help will be much appreciated...... and no I do not wish to root my phone just yet :dDid you ever get this working as was going to buy a smartwatch tomorrow to go with my padfone?
-
Is adobe working on the compatibility of AIR with Intel system on android devices?
Air on intel x86 android is causing a good amount of grief to a lot of folks. Please vote !! https://bugbase.adobe.com/index.cfm?event=bug&id=3648268
-
Hi all,
I have searched through forums, but could not find the solution to my problem:
I have a notebook ASUS with Windows 8 preinstalled.
Yesterday I was doing some housecleaning jobs with some freeware tool (don't remember the name).
Afterwards I have not been able to boot into Windows.
CURRENT SITUATION: When I switch the PC on, after the welcome screen of ASUS and Windows 8 the system goes to a blank screen (no cursor, no mouse, CTRL+ALT+DEL not working).
On next reboot, it does not start automatically the Recovery/Repair procedure and goes through the same steps again. It's not a loop, it just hangs.
Looking into c:\windows\system32\LogFiles\Srt\srttrail.txt I see the following error message at the bottom of the file on the time of my last boot attempt: "Operating system version is incompatible with Startup Repair"
I tried several things without success, so now I want to solve the problems one by one and first thing is to understand what might be causing the "Operating system version is incompatible with Startup Repair" error and how it can be solved.
Thanks for readingHi,
Any update here?
I agreed with the others. First, if we have any backup available to restore Windows 8.1, we may take use of that.
If we don't have any backup available, we'd better contact the manufacturer side for a deeper help.
Or as Janek Fehn suggested, make a clean install of Windows 8, then update to Windows 8.1 again.
Best regards
Michael Shao
TechNet Community Support -
Adobe Touch Apps on ASUS Padfone
Hello,
I was quite disappointed when I saw that none of the Adobe Touch Apps are working on ASUS Padfone. Everytime it says that the device is not compatible - even though I docked the Padfone in its station making it a 10" tablet with Android 4.0.3.
Please add compatibility with the Padfone since it seems to be a quite fantastic device for creative working!I found out that all Touch apps are working perfectly on the Padfone. You can download them by changing the build.prop faking to have a supported device (i.e. Galaxy Tab 10) - although it works, it's pretty inconvenient, especially concerning updates.
But I assume it is as easy as adding the Padfone to the list of supported devices for the Touch apps. That should be possible in no time, shouldn't it?
Would be glad to be able to finally buy these neat Apps! -
Hello.
I thought to check if there is any information about www.asus.com/Mobile/PadFone2/ but I did not find. So I decided to start new topic exclusively about this device because I am participating Asus PadFone 2 Test Pilot program and I recieving my device next week.
I will test and benchmark how well Adobe software do work on this device, so there will be reviews and other details what I think and how I feel of using this device.
I will also do video material about using device etc. However most of videos will be in Finnish since I primarily try to reach Finnish audience with this, however some videos may also be in english where I cover key features of device and how Adobe programs work on it.
More of content will be created and links added here so other users can see my reviews about device etc.Technically, I would say the Padfone is more a smartphone than a tablet, so Adobe Photoshop Touch for Phone might be a better fit...though, technically, the Padfone *can* do tablet resolution PS Touch for Tablets requires...
As a curiosity, have you tried it anyway to see? You have 15 mins. from when download starts to refund it via Google Play. -
SOURCE_PACKAGE is INCOMPATIBLE with the FORMAL PARAMETER DATA_PACKAGE
Hello Experts,
Infocube A is getting updated from shopping carts DSO. I have added 3 new fields in SC DSO then cube transformations got inactive. I do not want 3 new fields in cube. we have report on DSO. Below is syntax error when checking transformations.
Error: In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter "SOURCE_PACKAGE" is incompatible with the formal parameter "DATA_PACKAGE".
3 New fields are available in tys_SC_1 but not available in tys_SC_1_full. I tried to insert 3 fields in tys_SC_1_full but still it is showing same syntax error. And more TYPE is availalbe tys_TG_1_full. This type does not have 3 fields.
Please advice.
Thanks in advance.
Regards
Venkata.Hello Rathy,
I have resolved issue by addinng fields to data package. Issue is becasue of 4 fields in source and I have added only 3 fields in data package. Added one more field to data package and no syntax errors when checked.
Thanks for the input and points assigned.
Regards
Venkata Agraharam. -
When I try to open Mail from the launchbar it won't open and comes up with a window saying it may be incompatible with this version of OS X.
What is the answer to fix this?!Backup for safety on at least two reliable drives.
Reinstall using the combo update at http://support.apple.com/kb/DL1746
You would be wise to quit all apps, disconnect all peripherals and preferably delete all email accounts before upgrading. -
K7N2 Delta (ILSR) incompatible with 200FSB?
Is the K7N2 Delta (Nforce2 Chipset) incompatible with 200FSB??... Ive seen many problems when trying to upgrade the CPU, and use a 200FSB in various forums. So, why does it keep hanging/crashing?? Might it be not really supported even though it specify it does?
From most of the posts I've been reading about this issue, the users are trying to build their systems using Value RAM from various manufacturers such as Kingston or Corsair among others...this just isn't a reality anymore in the high speed world of components...the Delta boards require a lot of power and high speed memory nowadays and a lot of the users are just unaware of these facts...
Part time builders are the most susceptible to this as they build a system every few years and think that all of the 'old' rules apply to their situation...what 'should' be isn't anymore as we continue to design and produce faster products that require faster peripherals to support them...
Getting away cheaply has been designed out of most systems and this really stems from the CPU mfg's and how MB designers have to approach BUS speeds and the like...
CDM has it right that you need to dip a little deeper these days for good QUALITY memory and peripheral items to ENSURE that when you build your new PC that you minimize these issues from the get go...if not then you're going to have a good run at testing this RAM or that RAM to find one that is cheap and will still have the speed capability to keep up with your high end MB & components...
Apacer is a good example of this...they're moderately priced and they perform very well in the sandbox with most applications that you set before them...overclocking them can lead you down a problematic path but overall they're pretty flexible from what I've seen...
Most of us here know that Mushkin is pretty infallable and will take pretty much whatever is thrown at their modules...if not calling their CS dept gets you the kind of help that most companies only dream about providing...
All in all the 'line' has risen and it will rise again and you'll see a rash of users that will complain that "This should do what I want it to do" but as is most always the case, you'll find that they're trying to build an underpowered system that requires fast peripheral components and a lot of them just aren't willing to dish out the cash required for a great white box system...
Yes I agree that it's a scam from the companies to force us to spend more of our hard earned dollars but that is the way of the world now, albeit that it's unfortunate...if you're really good at building systems tho, you'll find that you can usually come up with a pretty mid-range priced system that will blaze thru all the latest games but that only comes with buying components to play trial & error with...much like I used to do in my Computer Store years ago...these days I don't do much of that, I just buy the good stuff and save my time... -
Witch laptops are compatible/incompatible with windows XP/VISTA
Hi so i am planning on buying Apple MacBook or maybe PRO
i have a list of laptops that are served in our area:
Apple MacBook Pro MA895
Apple MacBook Pro MA610
Apple MacBook Pro MA611
Apple MacBook Pro MA897
Apple MacBook MB062
Apple MacBook MB063
and i need to know wich one of those are compatible or incompatible with Windows XP? please make a quick response
In advance thank you for your timeAll of the "MacBook" laptops are compatible with XP/Vista.
One thing to note is that BootCamp is currently in the beta version (at least until when OS X Leopard comes out), so you may have some minor problems installing and running windows, but they should be fine.
Another thing to note is since Vista craves a lot of CPU, RAM, HD and graphics, I would suggest you going to a MacBook Pro. I have heard that Vista does not run smoothly on computers with less than 2 GB RAM, nor does all of its features render well if you don't have a 128 MB graphics card. Increasing the MacBook's RAM to 2 GB may also significantly increase the performance.
Either way, the option is yours. All of them should work out fine, with perhaps a couple of firmware updates -
Subroutine-the actual parameter is incompatible with the formal parameter
Hi,
I have the following code that is outputting an error message during activation:
DATA: I_RESBB TYPE TABLE OF RESBB,
WA_RESBB TYPE RESBB.
PERFORM OBTAIN_RESBB_DATA
USING I_RESBB.
*& Form OBTAIN_RESBB_DATA
* text
* -->P_I_RESBB text
FORM OBTAIN_RESBB_DATA USING VALUE(P_I_RESBB) TYPE RESBB.
ENDFORM. " OBTAIN_RESBB_DATA
However, I am getting the following messages during activation:
In PERFORM or CALL FUNCTION "OBTAIN_RESBB_DATA", the actual parameter
"I_RESBB" is incompatible with the formal parameter "P_I_RESBB".
What am I doing wrong? I have checked through many different threads & sites but can't find a solution.
Thanks,
JohnJohn, since you seem quite familiar with the ABAP help and obsolete statements I'm now surprised what you were initially asking for.. .
Anyhow, below a sample coding with the table being passed as a USING parameter. Avoid using VALUE on the parameter (i.e. pass by value) unless you need a copy of the parameter. Otherwise this leads to a performance overhead (requirement to copy the parameter), especially for large internal tables.
TYPES T_RESBB_TAB TYPE STANDARD TABLE OF RESBB WITH NON-UNIQUE DEFAULT KEY.
DATA I_RESBB TYPE T_RESBB_TAB.
PERFORM OBTAIN_RESBB_DATA USING I_RESBB.
FORM OBTAIN_RESBB_DATA USING I_RESBB TYPE T_RESBB_TAB.
FIELD-SYMBOLS: <RESBB> TYPE LINE OF T_RESBB_TAB.
LOOP AT I_RESBB ASSIGNING <RESBB>.
" Additional coding for evaluating/updating the table
ENDLOOP.
ENDFORM.
Cheers, harald
P.S.: Update of my posting: Just read your one comment. Looks like your only problem was attempting to define the table type in the parameters section of the form routine. This doesn't work. If you don't have a type you could use a generic type (i.e. simply just say <i>using i_resbb type table</i>), but in general I would stick to strong typing unless you have a generic routine that must handle different table types. So simply refer to a table type from dictionary or that you defined in your program. -
"SOURCE_PACKAGE" is incompatible with "DATA_PACKAGE"
Hi All,
While activating Transformation 2lis_13-vditm I am getting an error
In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter "SOURCE_PACKAGE" is incompatible with the formal parameter "DATA_PACKAGE".
Is there anyone who can solve this problem?
Regards
Amit SrivastavaHi,
Do you have a similar declaration as below, for Type tys_SC_1_full, in the routine?
TYPES:
BEGIN OF _ty_s_SC_1_full,
field1 type c,
field2 type c,
field3 type i,
END OF _ty_s_SC_1_full.
If Yes, delete or comment all the declarations present in between above BEGIN & END(remove the field1, field2 & field3 declarations).
Now copy all the declarations from the other TYPES tys_SC_1 delcaration and paste here.
In brief the structure of tys_SC_1_full should be exactly same as tys_SC_1. -
BIB-16633 Cannot connect because the database version is incompatible with
BIB-16633 Cannot connect because the database version is incompatible with Feb 15, 2005 9:28 PM
Reply
why is this?
oracle.dss.connection.common.ConnectionException: BIB-16633 Cannot connect because the database version is incompatible with this BI Beans version.
at oracle.dss.connection.server.drivers.mdm.MDMConnectionDriverImpl.connect(MDMConnectionDriverImpl.java:147)
at oracle.dss.connection.server.ConnectionImpl.connect(ConnectionImpl.java:285)
at oracle.dss.connection.client.Connection.connect(Connection.java:425)
at oracle.dss.connection.client.Connection.connect(Connection.java:342)
at oracle.dss.addins.designer.OLAPSource.test(OLAPSource.java:284)
at oracle.dss.addins.wizard.configFileEditor.OlapPanel.testConnection(OlapPanel.java:244)
at oracle.dss.addins.wizard.configFileEditor.OlapPanel.btnTest_actionPerformed(OlapPanel.java:378)
at oracle.dss.addins.wizard.configFileEditor.OlapPanel$3.actionPerformed(OlapPanel.java:120)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1786)
at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1839)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:245)
at java.awt.Component.processMouseEvent(Component.java:5100)
at java.awt.Component.processEvent(Component.java:4897)
at java.awt.Container.processEvent(Container.java:1569)
at java.awt.Component.dispatchEventImpl(Component.java:3615)
at java.awt.Container.dispatchEventImpl(Container.java:1627)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
at java.awt.Container.dispatchEventImpl(Container.java:1613)
at java.awt.Window.dispatchEventImpl(Window.java:1606)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:141)
at java.awt.Dialog$1.run(Dialog.java:540)
at java.awt.Dialog.show(Dialog.java:561)
at java.awt.Component.show(Component.java:1133)
at java.awt.Component.setVisible(Component.java:1088)
at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
at oracle.dss.addins.wizard.configFileEditor.ConfigFileEditorWizard.run(ConfigFileEditorWizard.java:229)
at oracle.dss.addins.designer.BIDesignerImpl.editConfigFile(BIDesignerImpl.java:1428)
at oracle.dss.addins.designer.BIDesignerAddin.openBIDesignerSettings(BIDesignerAddin.java:990)
at oracle.dss.addins.designer.BIDesignerAddin.actionPerformed(BIDesignerAddin.java:807)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1786)
at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1839)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.AbstractButton.doClick(AbstractButton.java:289)
at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1113)
at javax.swing.plaf.basic.BasicMenuItemUI$MouseInputHandler.mouseReleased(BasicMenuItemUI.java:943)
at java.awt.Component.processMouseEvent(Component.java:5100)
at java.awt.Component.processEvent(Component.java:4897)
at java.awt.Container.processEvent(Container.java:1569)
at java.awt.Component.dispatchEventImpl(Component.java:3615)
at java.awt.Container.dispatchEventImpl(Container.java:1627)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
at java.awt.Container.dispatchEventImpl(Container.java:1613)
at java.awt.Window.dispatchEventImpl(Window.java:1606)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
Lisa Sherriff
Posts: 137
OTN Member Since: Jan, 2001
Re: BIB-16633 Cannot connect because the database version is incompatible w ( In Reply To : BIB-16633 Cannot connect because the database version is incompatible with ) Feb 16, 2005 1:32 AM
Reply
Hi,
From the 10.1.2 BI Beans Install Guide it says:
OracleBI Beans supports data stored in Oracle9i Enterprise Edition or Oracle Database 10g Enterprise Edition. However, only particular releases and patchsets are supported:
* Oracle9i Release 2 Enterprise Edition, as follows:
o 9.2.0.6 for all platforms.
o 9.2.0.5 with the latest OLAP patch for Windows-only.
* Oracle Database 10g Release 1 Enterprise Edition with the latest OLAP patch.
From the error message it would appear that the Database is not one of the above.
Thanks,
Lisa
JDev QA
401488
Posts: 48
OTN Member Since: Aug, 2002
Re: BIB-16633 Cannot connect because the database version is incompatible with ( In Reply To : BIB-16633 Cannot connect because the database version is incompatible with ) Feb 18, 2005 8:01 PM
Reply
Hi,
Please note that we have follwing versions of DB up and running:-
1)Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
2)Oracle9i Enterprise Edition Release 9.2.0.5.0 - Production
With the Partitioning and Real Application Clusters options
JServer Release 9.2.0.5.0 - Production
Pls let us know the solution to resolve this problem ASAP.
Thanks.You are not using a supported version of the database. BI Beans/OLAP only support the following database versions:
10g - 10.1.0.3 with additional OLAP patch
9i - 9205 with additional OLAP patch
9i - 9206
I would suggest that you have not applied all the required database patches to your instance.
Hope this helps
Business Intelligence Beans Product Management Team
Oraclc Corporation -
Hi
I am trying to import data in Oracle 11g Release2(11.2.0.1) using impdp utitlity and getting below errror
UDI-00018: Data Pump client is incompatible with database version 11.2.0.1.0
Export dump has taken in database with oracle 11g Release 1(11.1.0.7.0) and I am trying to import in higher version of the database. Is there any parameter I have to set to avoid this error?AUTHSTATE=compat
A__z=! LOGNAME
CLASSPATH=/app/oracle/11.2.0/jlib:.
HOME=/home/oracle
LANG=C
LC__FASTMSG=true
LD_LIBRARY_PATH=/app/oracle/11.2.0/lib:/app/oracle/11.2.0/network/lib:.
LIBPATH=/app/oracle/11.2.0/JDK/JRE/BIN:/app/oracle/11.2.0/jdk/jre/bin/classic:/app/oracle/11.2.0/lib32
LOCPATH=/usr/lib/nls/loc
LOGIN=oracle
LOGNAME=oracle
MAIL=/usr/spool/mail/oracle
MAILMSG=[YOU HAVE NEW MAIL]
NLSPATH=/usr/lib/nls/msg/%L/%N:/usr/lib/nls/msg/%L/%N.cat
NLS_DATE_FORMAT=DD-MON-RRRR HH24:MI:SS
ODMDIR=/etc/objrepos
ORACLE_BASE=/app/oracle
ORACLE_HOME=/app/oracle/11.2.0
ORACLE_SID=AMT6
ORACLE_TERM=xterm
ORA_NLS33=/app/oracle/11.2.0/nls/data
PATH=/app/oracle/11.2.0/bin:.:/usr/bin:/etc:/usr/sbin:/usr/ucb:/home/oracle/bin:/usr/bin/X11:/sbin:.:/usr/local/bin:/usr/ccs/bin
PS1=nbsud01[$PWD]:($ORACLE_SID)>
PWD=/nbsiar/nbimp
SHELL=/usr/bin/ksh
SHLIB_PATH=/app/oracle/11.2.0/lib:/usr/lib
TERM=xterm
TZ=Europe/London
USER=oracle
_=/usr/bin/env -
Hi friends,
I am getting the error message:
In PERFORM or CALL FUNCTION "GETATTRIBUTES",
the actual parameter "LT_ATTR_DAT"
is incompatible with
the formal parameter "P_LT_ATTR_DATA".
Please advice what is wrong right here.
Thanks in advance
Sas
DATA: lt_attr_dat TYPE TABLE OF bbpt_attr.
PERFORM getattributes
TABLES
lt_attr_dat
USING
sy-uname.
FORM getAttributes
TABLES lt_attr_data type bbpt_attr
USING lv_user TYPE sy-uname.
TYPES: BEGIN OF lty_user_attr,
attr_id TYPE om_attrib,
value_logsys TYPE log_system,
value TYPE char30,
END OF lty_user_attr.
DATA: lt_user_attr TYPE TABLE OF lty_user_attr.
DATA: lt_attr_list TYPE bbpt_attr_list.
DATA: lt_vlist TYPE bbpt_attr_values.
DATA: ls_attr_list TYPE bbp_attr_list.
DATA: ls_attr_data TYPE bbps_attr.
DATA: ls_user_attr TYPE lty_user_attr.
DATA: ls_vlist TYPE bbps_attr_values.
DATA: ls_t77omattr TYPE t77omattr.
lv_user = sy-uname.
ls_attr_list-attr_id = 'WRK'.
APPEND ls_attr_list TO lt_attr_list.
* Read Attributes
CALL FUNCTION 'BBP_READ_ATTRIBUTES'
EXPORTING
iv_user = lv_user
it_attr_list = lt_attr_list
IMPORTING
et_attr = lt_attr_data
EXCEPTIONS
object_id_not_found = 1
no_attributes_requested = 2
attributes_read_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
endform. " getAttributesPERFORM getattributes
TABLES
lt_attr_dat[]
USING
sy-uname.
FORM getAttributes
TABLES lt_attr_data STRUCTURE bbpt_attr
USING lv_user TYPE sy-uname.
Note : STRUCTURE Is obselete, hence you may define it as
types: tab_type type table of bbpt_attr.
FORM getAttributes
TABLES lt_attr_data type tab_type
USING lv_user TYPE sy-uname.
Regards,
Mohaiyuddin
Edited by: Mohaiyuddin Soniwala on Nov 26, 2008 5:10 PM
Edited by: Mohaiyuddin Soniwala on Nov 26, 2008 5:12 PM
Maybe you are looking for
-
Event double -click doens't work
Dear All, Pls help event double -click doens't work. What can the reason be for it ? Regards Ilhan data tree1 type ref to cl_gui_alv_tree. data mr_toolbar type ref to cl_gui_toolbar. include <icon>. data: gt_sflight type ZQMCOMP occurs 0, "
-
How do i switch back to my ipod info after syncing with someone elses?
I plugged my Ipod into my sisters computer to download her Itune music onto mine. Now my ipod has all her info on it. Its like mine syned up to hers and all my info is gone. I still have my aps but it wont let me use them and my email info is her
-
How to make use of a global internal table in SAP BW during transfer rules
HI friends, I am ABAP consultant working on some APO info cubes. I have an issue during the upload of planning area data into APO info cube. Please help. I am using a transfer routine to find the TECHWEEK from a data base table ZGC_CALWEEK based on t
-
Apple TV to smart TV connection
I've connected my LG wifi ready tv to my Apple TV via hdmi. ATV connects to Internet via wireless which is all I need really, so I'm bypassing all the smart tv features. However, There are couple of things that would be nice to access to on smart tv
-
RoboHelp 6 crashes-Robo 5 project when using conditional build tags
Hi there I had no build tags in my project, and it was an R5 project. I just upgrated to R6. I need to use the tags & when I put a build tag or two in the project on the topic level and compile it and it crashes. Based on a prior thread (related to m