Incompatible with Powerpc error

I recently purchased a new Retina Macbook Pro. I installed CS5.5 on it and I cannot open several of the apps (ie. Photoshop, Dreamweaver) because I am getting an error that says that they are no longer supported for powerpc computers. My computer is not powerpc. Does anybody know what I need to do to get things working again? Has this happened to anybody else?

This article is for cs3 and cs4 , but worth trying
http://helpx.adobe.com/photoshop/kb/error-powerpc-applications-supported-photoshop.html

Similar Messages

  • I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported..pls advise

    I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported......Is there a way to run FCP6 on lion withoput this error? Any help would be appreciated.....

    Hi Shane,
    Just one more quesiton re: this topic, I am looking to get rosetta but do not have Leopard or Snow Leopard...
    I read that it is not on Snow Leopard only on Leopard....so do I need to get only Leopard? Can u advise?
    Alternatively I do have Mac OS X Tiger so is it on this and can I install it from here?
    Please excuse my lack of knowledge here, just trying to get my FCP 6 up and running asap....
    Best Rgds.

  • HT1414 I used to have 'sky at night' app but it got deleted in error, now when I try to download the app I get 'this app is incompatible with this phone' ' this app requires a gyroscope'...why ? whats changed ? how do I resolve the issue ?  thanks CB

    I used to have 'sky at night' app but it got deleted in error, now when I try to download the app I get 'this app is incompatible with this phone' ' this app requires a gyroscope'...why ? whats changed ? how do I resolve the issue ?  thanks CB

    I used to have 'sky at night' app but it got deleted in error, now when I try to download the app I get 'this app is incompatible with this phone' ' this app requires a gyroscope'...why ? whats changed ? how do I resolve the issue ?  thanks CB

  • Compile error in hidden module: Essbaselogon. This error commonly occurs when code is incompatible with the version, Platform, or architecture of this application

    Hi,
    I am getting below wrror while accesing the Ecel:
    compile error in hidden module: Essbaselogon. This error commonly occurs when code is incompatible with the version, Platform, or architecture of this application

    IIRC essbase is a financial reporting add-in (Hyperion, or something similar?).
    This message is telling you that the add-in is not compatible with your current software. You should check with the vendor who provided the essbase add-in. Tell them what version of windows and Excel (and maybe Hyperion) you are using, and get a compatible
    version from them...
    If you do not need or run essbase/hyperion/etc then you should just remove/disable the add-in. If it doesn't show in your add-in menu, then you may have to do a repair installation or re-install Excel

  • HT1338 tried to update 10.7.4 to 10.7.5 get un expected error at cleanup....have tried several times with no success..after failed try mail will not open because the mail is now incompatible with 10.7.4......HELP

    tried to update 10.7.4 to 10.7.5 get un expected error at cleanup....have tried several times with no success..after failed try mail will not open because the mail is now incompatible with 10.7.4......HELP

    2009 MacBook Pro eh? It looks like your hard drive has failed. Three years is pretty standard. Often, then only hint you have is catastrophic failure.
    If you put the old hard drive into an external enclosure or similar device, you may still be able to migrate your data from it. Just because it won't boot doesn't mean you can't still read from it. Still, I wouldn't keep trying it. As long as you are buying a new hard drive, may as well get sometime to use with Time Machine too.

  • Incompatible with Adobe InDesign (Error code: 14)

    Hi all,
    I've been having major problems with InDesign CS3 and OS 10.5. It always crashes when I try to Place, Export, Save As, anything that requires it to navigate the finder.
    Now, while trying to export to PDF, the document froze. So I had to force quit it. Now ANY InDesign file I try to open gives me the error message:
    The file "file name" is incompatible with Adobe InDesign (Error code: 14).
    Has anyone experienced this? I'm now stuck as I cannot open anything to get some work done.
    Thanks in advance.

    Hi all
    I have the excat same problem. Indesign CS5 and also my CS4 comes op with the error code 14.
    It qrashes before I get into the program, also when I open it throug the program Icon and not the file.
    I have tried:
    Restarting
    Shot down and take out the power cord for severeal minutes
    Deleting the preference files "Defaults" and "SavedData" manualy
    Deleting the file "InfoPlist.Strings" in folder "itlproj" which was a folder that keept showing on restart. (it was a italian languae to a dropdown shadow throug Flash CS5)
    Remove indesign CS5 and CS4 (with the program uninstall icon) and reinstalled it
    I have no clue to what more I can do. Think it could be a system fault. I have the following:
    Mac OS X Version 10.6.8
    Dual core Intel Xeron
    Snow leopard
    It just suddenly didnt work. Couldnt copy paste text from a mail into a file in Indesign and then it just crashed. Havent installed any new updates or programs so it is very weird.
    Any help would be very much appriciated
    Take care
    Fustrated Jinnie

  • Getting error message when I attempt to update my apps.  Error says This app Is Incompatible with this iPad.

    I am getting an error message when I attempt to update my apps.  It says "This App Is Incompatible with This iPad"  Have never had this problem before, any suggestions?

    Hello Jones The Steam
    Check the App to see what Apple ID it is associated with. If it is with another Apple ID, you would need to delete it and download it with your current Apple ID.
    Recovering a forgotten iTunes Store account name
    http://support.apple.com/kb/ht1920
    Regards,
    -Norm G.

  • I'm trying to open samsung pc studio and it givesme an error message and windows then tells me my flash player is incompatible with my system...this after i've downloaded the flash player im told is compatible with my system

    i'm trying to open samsung pc studio and it givesme an error message and windows then tells me my flash player is incompatible with my system...this after i've downloaded the flash player im told is compatible with my system

    In general, when desktop software is using Flash Player, it's because they're embedding an Internet Explorer window in the application.  If you don't have Flash Player for Internet Explorer (aka. the ActiveX Flash Player) installed, then the desktop application isn't going to work. 
    So, fire up Internet Explorer
    Go here: http://get.adobe.com/flashplayer/
    Follow the prompts, and then re-launch the application after you've completed the installation in IE.  Hopefully that sorts it out for you.

  • Cannot boot from Windows 8 notebook - Error: Operating system version is incompatible with Startup Repair

    Hi all,
    I have searched through forums, but could not find the solution to my problem:
    I have a notebook ASUS with Windows 8 preinstalled.
    Yesterday I was doing some housecleaning jobs with some freeware tool (don't remember the name).
    Afterwards I have not been able to boot into Windows.
    CURRENT SITUATION: When I switch the PC on, after the welcome screen of ASUS and Windows 8 the system goes to a blank screen (no cursor, no mouse, CTRL+ALT+DEL not working).
    On next reboot, it does not start automatically the Recovery/Repair procedure and goes through the same steps again. It's not a loop, it just hangs.
    Looking into c:\windows\system32\LogFiles\Srt\srttrail.txt I see the following error message at the bottom of the file on the time of my last boot attempt: "Operating system version is incompatible with Startup Repair"
    I tried several things without success, so now I want to solve the problems one by one and first thing is to understand what might be causing the "Operating system version is incompatible with Startup Repair" error and how it can be solved.
    Thanks for reading

    Hi,
    Any update here?
    I agreed with the others.  First, if we have any backup available to restore Windows 8.1, we may take use of that.
    If we don't have any backup available, we'd better contact the manufacturer side for a deeper help.
    Or as Janek Fehn suggested, make a clean install of Windows 8, then update to Windows 8.1 again.
    Best regards
    Michael Shao
    TechNet Community Support

  • Error:configuration of serial number  1pm0hm incompatible with document num

    Hi Guys,
    When i enter a serial number in the delivery document, i get an error message saying
    "configuration of serial number  1pm0hm incompatible with document number "
    The material has serial number profile maintained in it and it is a configurable material...
    But i m not sure why this error message is showing up
    Please suggest....
    Thanks
    Anand Viswanathan

    Hi Anand,
    Please go to IQ02 --> Select the 2nd last Tab page "Configuration data" --> There you can see the material in the feild "Configurable material" --> Please check the boxes (Refrenced or Individual) --> mark it as per our requirement.
    Then click on Display and See whether system shows the charaterstics or not?
    Please try and revert back with your findings.
    Also tell what exactlythe status of your serial number,It should be ESTO SLOR.
    Hope this helps,
    Regards,
    MT

  • I just updated to 10.9.3. I now cannot open Mail - it comes up with an error window and suggests it may be incompatible with this OS. What is the fix for this? Thanks

    When I try to open Mail from the launchbar it won't open and comes up with a window saying it may be incompatible with this version of OS X.
    What is the answer to fix this?!

    Backup for safety on at least two reliable drives.
    Reinstall using the combo update at http://support.apple.com/kb/DL1746
    You would be wise to quit all apps, disconnect all peripherals and preferably delete all email accounts before upgrading.

  • Keep getting the installer encountered errors before installing ituunes.  Is it incompatible with windows 8 consumer preview?

    I don't have Itunes on my computer now.  This kind of *****.  Is it incompatible with windows 8 preview?

    Try this: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • SOURCE_PACKAGE is INCOMPATIBLE with the FORMAL PARAMETER DATA_PACKAGE

    Hello Experts,
    Infocube A is getting updated from shopping carts DSO. I have added 3 new fields in SC DSO then cube transformations got inactive.  I do not want 3 new fields in cube. we have report on DSO. Below is syntax error when  checking transformations.
    Error: In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter "SOURCE_PACKAGE" is incompatible with the formal parameter "DATA_PACKAGE".
    3 New fields are available in tys_SC_1 but not available in tys_SC_1_full. I tried to insert 3 fields in tys_SC_1_full but still it is showing same syntax error.  And more TYPE is availalbe tys_TG_1_full.  This type does not have 3 fields.
    Please  advice.
    Thanks in advance.
    Regards
    Venkata.

    Hello Rathy,
    I have resolved issue by addinng fields to data package. Issue is becasue of 4 fields in source and I have added only 3 fields in data package. Added one more field to data package and no syntax errors when checked.
    Thanks for the input and points assigned.
    Regards
    Venkata Agraharam.

  • K7N2 Delta (ILSR) incompatible with 200FSB?

    Is the K7N2 Delta (Nforce2 Chipset) incompatible with 200FSB??... Ive seen many problems when trying to upgrade the CPU, and use a 200FSB in various forums. So, why does it keep hanging/crashing?? Might it be not really supported even though it specify it does?

    From most of the posts I've been reading about this issue, the users are trying to build their systems using Value RAM from various manufacturers such as Kingston or Corsair among others...this just isn't a reality anymore in the high speed world of components...the Delta boards require a lot of power and high speed memory nowadays and a lot of the users are just unaware of these facts...
    Part time builders are the most susceptible to this as they build a system every few years and think that all of the 'old' rules apply to their situation...what 'should' be isn't anymore as we continue to design and produce faster products that require faster peripherals to support them...
    Getting away cheaply has been designed out of most systems and this really stems from the CPU mfg's and how MB designers have to approach BUS speeds and the like...
    CDM has it right that you need to dip a little deeper these days for good QUALITY memory and peripheral items to ENSURE that when you build your new PC that you minimize these issues from the get go...if not then you're going to have a good run at testing this RAM or that RAM to find one that is cheap and will still have the speed capability to keep up with your high end MB & components...
    Apacer is a good example of this...they're moderately priced and they perform very well in the sandbox with most applications that you set before them...overclocking them can lead you down a problematic path but overall they're pretty flexible from what I've seen...
    Most of us here know that Mushkin is pretty infallable and will take pretty much whatever is thrown at their modules...if not calling their CS dept gets you the kind of help that most companies only dream about providing...
    All in all the 'line' has risen and it will rise again and you'll see a rash of users that will complain that "This should do what I want it to do" but as is most always the case, you'll find that they're trying to build an underpowered system that requires fast peripheral components and a lot of them just aren't willing to dish out the cash required for a great white box system...
    Yes I agree that it's a scam from the companies to force us to spend more of our hard earned dollars but that is the way of the world now, albeit that it's unfortunate...if you're really good at building systems tho, you'll find that you can usually come up with a pretty mid-range priced system that will blaze thru all the latest games but that only comes with buying components to play trial & error with...much like I used to do in my Computer Store years ago...these days I don't do much of that, I just buy the good stuff and save my time...

  • Subroutine-the actual parameter is incompatible with the formal parameter

    Hi,
    I have the following code that is outputting an error message during activation:
    DATA: I_RESBB TYPE TABLE OF RESBB,
          WA_RESBB TYPE RESBB.
    PERFORM OBTAIN_RESBB_DATA
    USING I_RESBB.
    *&      Form  OBTAIN_RESBB_DATA
    *       text
    *      -->P_I_RESBB  text
    FORM OBTAIN_RESBB_DATA  USING    VALUE(P_I_RESBB) TYPE RESBB.
    ENDFORM.                    " OBTAIN_RESBB_DATA
    However, I am getting the following messages during activation:
    In PERFORM or CALL FUNCTION "OBTAIN_RESBB_DATA", the actual parameter
    "I_RESBB" is incompatible with the formal parameter "P_I_RESBB".
    What am I doing wrong? I have checked through many different threads & sites but can't find a solution.
    Thanks,
    John

    John, since you seem quite familiar with the ABAP help and obsolete statements I'm now surprised what you were initially asking for.. .
    Anyhow, below a sample coding with the table being passed as a USING parameter. Avoid using VALUE on the parameter (i.e. pass by value) unless you need a copy of the parameter. Otherwise this leads to a performance overhead (requirement to copy the parameter), especially for large internal tables.
    TYPES T_RESBB_TAB TYPE STANDARD TABLE OF RESBB WITH NON-UNIQUE DEFAULT KEY.
    DATA I_RESBB TYPE T_RESBB_TAB.
    PERFORM OBTAIN_RESBB_DATA USING I_RESBB.
    FORM OBTAIN_RESBB_DATA  USING I_RESBB TYPE T_RESBB_TAB.
      FIELD-SYMBOLS: <RESBB> TYPE LINE OF T_RESBB_TAB.
      LOOP AT I_RESBB ASSIGNING <RESBB>.
        " Additional coding for evaluating/updating the table
      ENDLOOP.
    ENDFORM.
    Cheers, harald
    P.S.: Update of my posting: Just read your one comment. Looks like your only problem was attempting to define the table type in the parameters section of the form routine. This doesn't work. If you don't have a type you could use a generic type (i.e. simply just say <i>using i_resbb type table</i>), but in general I would stick to strong typing unless you have a generic routine that must handle different table types. So simply refer to a table type from dictionary or that you defined in your program.

Maybe you are looking for