Incomplete DB Recovery, Basic query

One legacy database needs to be recovered. Version 8i,
SVRMGR> shutdown abort
SVRMGR> startup mount pfile='D:\oracle\admin\ORCL\pfile\initORCL.ora'
SVRMGR> recover database until cancel
I cannot enter CANCEL, it throws the following error and comes out to SVRMGR prompt.
ORA-00283: recovery session cancelled due to errors
ORA-00368: checksum error in redolog block
ORA-00353: log corruption near block4993 change *110829381* time 02/11/10 02:06:35
ORA-00334: archived log 'D:\ORACLE\ORADATA\ORCL\ARCHIVELOG_1\LOG0000442324.ARC'
Now If I issue RESETLOGS, it says file 1 is in inconsistent state due to a failed media recovery session
Should I do a fresh recovery with the following...
recover database until time '2010-02-11:01:00:00';
OR
recover database until change *110829379*;
thanks

userR12 wrote:
One legacy database needs to be recovered. Version 8i,
SVRMGR> shutdown abort
SVRMGR> startup mount pfile='D:\oracle\admin\ORCL\pfile\initORCL.ora'
SVRMGR> recover database until cancel
I cannot enter CANCEL, it throws the following error and comes out to SVRMGR prompt.
ORA-00283: recovery session cancelled due to errors
ORA-00368: checksum error in redolog block
ORA-00353: log corruption near block4993 change *110829381* time 02/11/10 02:06:35
ORA-00334: archived log 'D:\ORACLE\ORADATA\ORCL\ARCHIVELOG_1\LOG0000442324.ARC'
Now If I issue RESETLOGS, it says file 1 is in inconsistent state due to a failed media recovery session
Should I do a fresh recovery with the following...
recover database until time '2010-02-11:01:00:00';
OR
recover database until change *110829379*;
thanksYou can't recover the database because your archived redo logs has been corrupted

Similar Messages

Basic query in Oracle Spatial

I'm trying to learn Oracle Spatial working with 11g R2 and with 3D georeferenced data (specifically data describing buildings in a city).
But I'm having trouble getting a basic query to work on my dataset (it works for the book example), and I'm trying to do it exactly the way it's done in the Spatial Developer's Guide for 11g.
To learn how spatial queries work, I set up the cola_markets tables used in the book, made the appropriate manual entry in the user_sdo_geom_metadata view and created the index. Having done that, I can run the following simple query (as well as the others in the manual) on the book tables:
SELECT SDO_GEOM.SDO_DISTANCE(c_b.shape, c_d.shape, 0.005)
FROM cola_markets c_b, cola_markets c_d
WHERE c_b.name = 'cola_b' AND c_d.name = 'cola_d';
but when I try to do the same thing on my own tables (created from citygml data), I get an error. There is the difference that the data is 3D, and the index was created without any PARAMETERS ( ... ), hence is just 2D. But still I don't get why the following query doesn't work:
SELECT SDO_GEOM.SDO_DISTANCE(c_w.envelope, c_b.envelope, 0.0005)
FROM cityobject c_w,
     cityobject c_b
WHERE c_w.id = 50025
     AND c_b.id = 50018;
The id's for the buildings are valid, and I used the same tolerance used by the software that set up the database.
Here's the error I get in SQL developer:
ORA-29532: Java call terminated by uncaught Java exception: java.lang.Exception: 54535
ORA-06512: at "MDSYS.SDO_3GL", line 637
ORA-06512: at "MDSYS.SDO_GEOM", line 1973
ORA-06512: at "MDSYS.SDO_GEOM", line 1990
29532. 00000 - "Java call terminated by uncaught Java exception: %s"
*Cause: A Java exception or error was signaled and could not be
     resolved by the Java code.
*Action: Modify Java code, if this behavior is not intended.
So, thinking it might have something to do with the fact that it's a Java interface, I also tried running it from SQL/PL command line and get essentially the same thing:
ERROR at line 1:
ORA-29532: Java call terminated by uncaught Java exception:
java.lang.Exception: 54535
ORA-06512: at "MDSYS.SDO_3GL", line 637
ORA-06512: at "MDSYS.SDO_GEOM", line 1973
ORA-06512: at "MDSYS.SDO_GEOM", line 1990
Any ideas why this isn't working?
(P.S.: I couldn't find a specific board for Oracle Spatial, hence put this question here--if there's a better place for this question, then, admins, of course, feel free to move the thread to the appropriate spot)

Hi,
The SPATIAL forum is here : {forum:id=76}

Basic question - Problems with basic query - Mask = INSIDE

Greetings,
I'm doing a basic query on Oracle 10g Spatial, is to determine the intersection between two layers (one point called "Calidad1") and other polygons, called "Parishes")
For issuing the following query based on the documentation of oracle:
"select C1.ID, C1.SECUENCIA,
P. COD_ENTIDAD, P. STATE
Cod_county P., P. TOWNSHIP,
P. COD_PARROQUIA, P. PARISH
from CALIDAD1 c1,
PARISHES p
where sdo_relate (c1.geoloc, p.geoloc, 'mask = INSIDE querytype = WINDOW') = 'TRUE'
order by C1.ID;
When I run the query, no errors but extends too long (more than 10 minutes) and no end, I have to cancel.
Canceling shows me the following error:
"ORA-13268: error obtaining dimension from USER_SDO_GEOM_METADATA
ORA-06512: at "MDSYS.MD", line 1723
ORA-06512: at "MDSYS.MDERR", line 8
ORA-06512: at "MDSYS.SDO_3GL", line 89 "
This query is very basic and the data volume is small, a conclusion: I must be skipping a step or activity.
Can you guide a little to resolve this situation and get the query that I need?
Thanks to all

First, try this query with the ordered hint and also note the change in the FROM clause.
select /*+ ordered */ C1.ID, C1.SECUENCIA,
P. COD_ENTIDAD, P. STATE
Cod_county P., P. TOWNSHIP,
P. COD_PARROQUIA, P. PARISH
from PARISHES p,
CALIDAD1 c1,
where sdo_relate (c1.geoloc, p.geoloc, 'mask = INSIDE querytype = WINDOW') = 'TRUE'
order by C1.ID;
See if this is using the index as expected. If not try this:
select /*+ ordered index(p name_of_the_spatial_index_on_the_PARISH_Table) */
C1.ID, C1.SECUENCIA,
P. COD_ENTIDAD, P. STATE
Cod_county P., P. TOWNSHIP,
P. COD_PARROQUIA, P. PARISH
from PARISHES p,
CALIDAD1 c1,
where sdo_relate (c1.geoloc, p.geoloc, 'mask = INSIDE querytype = WINDOW') = 'TRUE'
order by C1.ID;
siva

Basic Query on CQ 5

Hi,
I have a basic query about CQ5 ,actually i will be getting training on it ,i have the following doubts:-
1)I am a beginner in JAva and related technologies,does one need to be an expert in java to understand CQ5?
2)I have mainly worked on Teamsite CMS before,how easy is it for someone from that background to adapt to DAY CQ/
I can go through all the java concepts which are mandatory in CQ5 understanding,please guide regarding them.
Looking forward for expert guidance.
Regards,
Raul

Hi Raul,
Here's my 2 cents:
1)I am a beginner in JAva and related technologies,does one need to be an expert in java to understand CQ5?
No - and - depends. CQ is an enterprise level CMS. As such, it has many many bits and bobs. There is a back-end Java element, a front-end JavaScript/ExtJS element, and a bunch of stuff between the two (sling, crx, osgi, etc.). My best recommendation would be get on a project with a skilled architect in which you are being given components or other parts/pieces to work on. That will give you hands on guidance on building CQ and direct access to seeing an entire project go up from soup-to-nuts. Also, if you haven't already, try to get to an Adobe CQ Dev training class. That will really help jump start your knowledge and get you off on the right foot.
2)I have mainly worked on Teamsite CMS before,how easy is it for someone from that background to adapt to DAY CQ/
Any previous CMS knowledge is definintely helpful. Teamsite is VERY different to CQ. However, the goal is the same. Content authors need a way of entering content that ultimately gets displayed and served up as a web page. Teamsite does this with forms whereas CQ does this more inline on the page... If you've ever worked with Teamsite Sitepublisher, that's even better. Either way, having CMS experience is definitely helpful.
Todd

Restore and Recovery basics!!!

Hi All,
Can somebody provide some useful links for restore and recovery basics...
Thanks in advance,
Regards,
Nick.

this is a create book to have. It talk everything from general backup to diff situation, to settin up tape backup...
http://www.amazon.com/Oracle-Database-RMAN-Backup-Recovery/dp/0072263172

Basic Query Creation

Hello,
Our company is about to go live with B1 and E commerce. We are very much looking forward to getting the ball rolling: the old MOM system and Sitelink shopping cart is causing issues!
Anyway, before i go too much further i would like to get hold of some basic Query creation documentation. So far i have been unable to find any.
If i have posted this in the wrong discussion group i apologies.
I look forward to hearing your comments and becoming a regular in this group,
Thanks,
Charlie

Hi Charlie,
Beside this forum, you may also search and post here:
SAP Add-Ons
Thanks,
Gordon

HP Pavilion dv6-6b47dx gets "Restoration Incomplete" from Recovery Manager.

I got my son's older HP Laptop, and decided to restore it before using it for myself. Previously it was working OK. An HP Pavilion dv6-6b47dx gets "Restoration Incomplete" from the Recovery Manager. I have tried running the recovery manager from both the HD partion and the DVD media I created. The HD and Memory pass. The wireless f12 key is off, and can not be turned back on from the keyboard. Some previous post have suggested the wireless being off could be a problem. Any suggestions would be greatly appreciated, Thanks!

Hi
No that Recovery media won't work in your laptop.
ISO file can be used to clean install. You'll have to get all the 25 character alphanumeric product activation key printed on the COA label on the back of your laptop to be clearly & legibly readable for activation of ISO after install.
Tutorial: http://www.sevenforums.com/tutorials/219487-clean-reinstall-factory-oem-windows-7-a.html
For additional drivers you can get them here:
https://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&os=4063&product=5197401&soft...
AMD chipset driver :
http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2064
Download, save them to a USB and install them from there during/after Win 7 installation.
You have to first install chipset, restart system - then audio driver-restart, graphic driver- restart, ethernet controller(LAN), network controller(WLAN & Bluetooth), card reader, touchpad , Protect smart hard drive protection driver, quick launch software in order.
I could see that your model came with Windows 7 Home Premium (64-bit) pre installed.
Here is the ISO file:
http://msft.digitalrivercontent.net/win/X17-58997.iso
Windows 7 Home Premium x64 English
Size: 3,243,070KB, MD5 hash: a319b5826162829c436306bebea7f0ff
Source: http://www.w7forums.com/threads/official-windows-7-sp1-iso-image-downloads.12325/page-2#post-124821
Download , save it to another PC, then make a bootable DVD/USB by mounting this ISO on to it by using software like Imgburn (choose lowest speed while burning to DVD).
Imgburn : http://www.imgburn.com/
This will be your Windows 7 installation disc.
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

HP pavilion dv6 restoration incomplete after recovery

I recently try to facotry reset my Hp pavilion dv6 using the recovery usb I make with the HP program when I brought this laptop, but it said "restoration incomplete".
I have ran the hard drive check and mem test at the BIOS and there isnt any problem. I also did a full format on the hard drive and it works. So I dont think there are any bad sector on hard drive.
I did factory reset, miniimze windows install...all the option I can had on the recovery problem but It doesnt work.
Once It finish the installation and laptop is restart, it automatically boot into the HP recovery program and said "restoration incomplete".
I am wondering how can I find my license product key so I can install a windows 7 or any other solution?
Thank you

Sorry no solution for you but I to have a DV6 that no longer allows the DVD drive, bluetooth, web cam, wi-di and probably a load of other things to work to work. I've never been able to make back ups of my settings so like you want to start again. Please HP answer this question as I'd love to try Windows 7 also. P.s. never had so much trouble with a laptop!!!! Runs hot, can't system restore, can't use the simple things I'm used to on any other laptop!!

Basic query in JAVA Threads....Please reply !!

I have a class (say ABC) which extends Thread...This class basically
reads some file which provides some start-time and stop-time information..
File structure is like:-
===========================================
<Entry1>Starttime = A and Stoptime = B
===========================================
Logic is that thread sleeps till time A arrived, then do some operations (which are written
in it's run() method) till stoptime..
The object of ABC class is being constructed in some other class.
Now there is a change....File can have multiple entries like..
======================================
<Entry1>starttime = A and stoptime = B
<Entry2>starttime = X and stoptime = Z
<Entry3>starttime = A and stoptime = B
<Entryn>starttime = X and stoptime = Z
======================================
The start-time and stop-time of any two Entries can be same or different.
The operations should start executing at the defined time..
In this case, multiple threads are required, which can do the operations
mentioned in Entry1,2 etc.....But how should it be implemented..
My query is:-
1) Can I have a common-wrapper class, which reads the file and based on
the number of Entries, instantiates that much number of threads...
But how to do that....I am new to JAVA...Should that class be a simple
class...or should it also implement Thread/Runnable interface.....
Or can I implement it as ThreadGroup......
Please give soem suggestions....Thanks...

e.g.
        ScheduledExecutorService exec = Executors.newScheduledThreadPool(2);
        exec.schedule(new Runnable() {
            public void run() {
                runTask();
        }, delay, TimeUnit.MILLISECONDS);

Help with a basic query

Hello
I am looking at a set of records and need to query them but cannot work out what syntax to use to get the desired result.
This is the query for the basic data
SELECT
SCE_STUC,
SCE_CRSC,
SCE_STAC
FROM SRS_SCE
WHERE SCE_AYRC = '2009/0'
and Sce_stuc LIKE '0702794'
This gives:
SCE_STUC SCE_CRSC SCE_STAC
0702794     OAKC3ZSKG     C
0702794     UBSH1BINS W
0702794     UBSH1WIDS C
So I need to create a query that shows where a person (sce_stuc) has a C status for sce_crsc OAKC3ZSKG but also has another SCE_CRSC not OAKC3ZSKG that is not status C.
I am using Oracle SQL developer btw
Any help much appreciated

Hi thanks for these
So I am looking for people that are C on course OAKC3ZSKG but have a record that is not C for another course this could be an In ('W','N') etc.
Sorry I have not been that clear so looking to return:
SCE_STUC SCE_CRSC SCE_STAC
*0702794     UBSH1BINS      W*
where the student has
SCE_STUC SCE_CRSC SCE_STAC
0702794     OAKC3ZSKG     C
0702794     OAKC3ZSKG     C
0702794     UBSH1BINS     W
Again many thanks

Basic query regarding work-area and select query

hi
dear sdn members,
thanks too all for solving all my query's up till now
i am stuck in a problem need help
1) why basically work-area has been used ? the sole purpose
2) different types of select query ? only coding examples
note: no links pls
regards,
virus

hi,
Work Area
Description for a data object that is particularly useful when working with internal tables or database tables as a source for changing operations or a target for reading operations.
WORKAREA is a structure that can hold only one record at a time. It is a collection of fields. We use workarea as we cannot directly read from a table. In order to interact with a table we need workarea. When a Select Statement is executed on a table then the first record is read and put into the header of the table and from there put into the header or the workarea(of the same structure as that of the table)of the internal table and then transferred top the body of the internal table or directly displayed from the workarea.
Each row in a table is a record and each column is a field.
While adding or retrieving records to / from internal table we have to keep the record temporarily.
The area where this record is kept is called as work area for the internal table. The area must have the same structure as that of internal table. An internal table consists of a body and an optional header line.
Header line is a implicit work area for the internal table. It depends on how the internal table is declared that the itab will have the header line or not.
.g.
data: begin of itab occurs 10,
ab type c,
cd type i,
end of itab. " this table will have the header line.
data: wa_itab like itab. " explicit work area for itab
data: itab1 like itab occurs 10. " table is without header line.
The header line is a field string with the same structure as a row of the body, but it can only hold a single row.
It is a buffer used to hold each record before it is added or each record as it is retrieved from the internal table. It is the default work area for the internal table.
With header line
SELECT.
Put the curson on that word and press F1 . You can see the whole documentation for select statements.
select statements :
SELECT result
FROM source
INTO|APPENDING target
[[FOR ALL ENTRIES IN itab] WHERE sql_cond]
Effect
SELECT is an Open-SQL-statement for reading data from one or several database tables into data objects.
The select statement reads a result set (whose structure is determined in result ) from the database tables specified in source, and assigns the data from the result set to the data objects specified in target. You can restrict the result set using the WHERE addition. The addition GROUP BY compresses several database rows into a single row of the result set. The addition HAVING restricts the compressed rows. The addition ORDER BY sorts the result set.
The data objects specified in target must match the result set result. This means that the result set is either assigned to the data objects in one step, or by row, or by packets of rows. In the second and third case, the SELECT statement opens a loop, which which must be closed using ENDSELECT. For every loop pass, the SELECT-statement assigns a row or a packet of rows to the data objects specified in target. If the last row was assigned or if the result set is empty, then SELECT branches to ENDSELECT . A database cursor is opened implicitly to process a SELECT-loop, and is closed again when the loop is ended. You can end the loop using the statements from section leave loops.
Up to the INTO resp. APPENDING addition, the entries in the SELECTstatement define which data should be read by the database in which form. This requirement is translated in the database interface for the database system´s programming interface and is then passed to the database system. The data are read in packets by the database and are transported to the application server by the database server. On the application server, the data are transferred to the ABAP program´s data objects in accordance with the data specified in the INTO and APPENDING additions.
System Fields
The SELECT statement sets the values of the system fields sy-subrc and sy-dbcnt.
sy-subrc Relevance
0 The SELECT statement sets sy-subrc to 0 for every pass by value to an ABAP data object. The ENDSELECT statement sets sy-subrc to 0 if at least one row was transferred in the SELECT loop.
4 The SELECT statement sets sy-subrc to 4 if the result set is empty, that is, if no data was found in the database.
8 The SELECT statement sets sy-subrc to 8 if the FOR UPDATE addition is used in result, without the primary key being specified fully after WHERE.
After every value that is transferred to an ABAP data object, the SELECT statement sets sy-dbcnt to the number of rows that were transferred. If the result set is empty, sy-dbcnt is set to 0.
Notes
Outside classes, you do not need to specify the target area with INTO or APPENDING if a single database table or a single view is specified statically after FROM, and a table work area dbtab was declared with the TABLES statement for the corresponding database table or view. In this case, the system supplements the SELECT-statement implicitly with the addition INTO dbtab.
Although the WHERE-condition is optional, you should always specify it for performance reasons, and the result set should not be restricted on the application server.
SELECT-loops can be nested. For performance reasons, you should check whether a join or a sub-query would be more effective.
Within a SELECT-loop you cannot execute any statements that lead to a database commit and consequently cause the corresponding database cursor to close.
SELECT - result
Syntax
... lines columns ... .
Effect
The data in result defines whether the resulting set consists of multiple rows (table-like structure) or a single row ( flat structure). It specifies the columns to be read and defines their names in the resulting set. Note that column names from the database table can be changed. For single columns, aggregate expressions can be used to specify aggregates. Identical rows in the resulting set can be excluded, and individual rows can be protected from parallel changes by another program.
The data in result consists of data for the rows lines and for the columns columns.
SELECT - lines
Syntax
... { SINGLE }
| { { } } ... .
Alternatives:
1. ... SINGLE
2. ... { }
Effect
The data in lines specifies that the resulting set has either multiple lines or a single line.
Alternative 1
... SINGLE
Effect
If SINGLE is specified, the resulting set has a single line. If the remaining additions to the SELECT command select more than one line from the database, the first line that is found is entered into the resulting set. The data objects specified after INTO may not be internal tables, and the APPENDING addition may not be used.
An exclusive lock can be set for this line using the FOR UPDATE addition when a single line is being read with SINGLE. The SELECT command is used in this case only if all primary key fields in logical expressions linked by AND are checked to make sure they are the same in the WHERE condition. Otherwise, the resulting set is empty and sy-subrc is set to 8. If the lock causes a deadlock, an exception occurs. If the FOR UPDATE addition is used, the SELECT command circumvents SAP buffering.
Note
When SINGLE is being specified, the lines to be read should be clearly specified in the WHERE condition, for the sake of efficiency. When the data is read from a database table, the system does this by specifying comparison values for the primary key.
Alternative 2
Effect
If SINGLE is not specified and if columns does not contain only aggregate expressions, the resulting set has multiple lines. All database lines that are selected by the remaining additions of the SELECT command are included in the resulting list. If the ORDER BY addition is not used, the order of the lines in the resulting list is not defined and, if the same SELECT command is executed multiple times, the order may be different each time. A data object specified after INTO can be an internal table and the APPENDING addition can be used. If no internal table is specified after INTO or APPENDING, the SELECT command triggers a loop that has to be closed using ENDSELECT.
If multiple lines are read without SINGLE, the DISTINCT addition can be used to exclude duplicate lines from the resulting list. If DISTINCT is used, the SELECT command circumvents SAP buffering. DISTINCT cannot be used in the following situations:
If a column specified in columns has the type STRING, RAWSTRING, LCHAR or LRAW
If the system tries to access pool or cluster tables and single columns are specified in columns.
Note
When specifying DISTINCT, note that you have to carry out sort operations in the database system for this.
SELECT - columns
Syntax
| { {col1|aggregate( col1 )}
{col2|aggregate( col2 )} ... }
| (column_syntax) ... .
Alternatives:
1. ... *
2. ... {col1|aggregate( col1 )}
{col2|aggregate( col2 )} ...
3. ... (column_syntax)
Effect
The input in columns determines which columns are used to build the resulting set.
Alternative 1
Effect
If * is specified, the resulting set is built based on all columns in the database tables or views specified after FROM, in the order given there. The columns in the resulting set take on the name and data type from the database tables or views. Only one data object can be specified after INTO.
Note
If multiple database tables are specified after FROM, you cannot prevent multiple columns from getting the same name when you specify *.
Alternative 2
... {col1|aggregate( col1 )}
{col2|aggregate( col2 )} ...
Effect
A list of column labels col1 col2 ... is specified in order to build the resulting list from individual columns. An individual column can be specified directly or as an argument of an aggregate function aggregate. The order in which the column labels are specified is up to you and defines the order of the columns in the resulting list. Only if a column of the type LCHAR or LRAW is listed does the corresponding length field also have to be specified directly before it. An individual column can be specified multiple times.
The addition AS can be used to define an alternative column name a1 a2 ... with a maximum of fourteen digits in the resulting set for every column label col1 col2 .... The system uses the alternative column name in the additions INTO|APPENDING CORRESPONDING FIELDS and ORDER BY. .
Column labels
The following column labels are possible:
If only a single database table or a single view is specified after FROM, the column labels in the database table - that is, the names of the components comp1 comp2... - can be specified directly for col1 col2 ... in the structure of the ABAP Dictionary.
If the name of the component occurs in multiple database tables of the FROM addition, but the desired database table or the view dbtab is only specified once after FROM, the names dbtab~comp1 dbtab~comp2 ... have to be specified for col1 col2 .... comp1 comp2 ... are the names of the components in the structure of the ABAP Dictionary.
If the desired database table or view occurs multiple times after FROM, the names tabalias~comp1 tabalias~comp2 ... have to be specified for col1 col2 .... tabalias is the alternative table name of the database table or view defined after FROM, and comp1 comp2 ... are the names of the components in the structure of the ABAP Dictionary.
The data type of a single column in the resulting list is the datatype of the corresponding component in the ABAP Dictionary. The corresponding data object after INTO or APPENDING has to be selected accordingly.
Note
If multiple database tables are specified after FROM, you can use alternative names when specifying single columns to avoid having multiple columns with the same name.
Example
Read specific columns of a single row.
DATA wa TYPE spfli.
SELECT SINGLE carrid connid cityfrom cityto
INTO CORRESPONDING FIELDS OF wa
FROM spfli
WHERE carrid EQ 'LH' AND connid EQ '0400'.
IF sy-subrc EQ 0.
WRITE: / wa-carrid, wa-connid, wa-cityfrom, wa-cityto.
ENDIF.
Alternative 3
... (column_syntax)
Effect
Instead of static data, a data object column_syntax in brackets can be specified, which, when the command is executed, either contains the syntax shown with the static data, or is initial. The data object column_syntax can be a character-type data object or an internal table with a character-type data type. The syntax in column_syntax, like in the ABAP editor, is not case-sensitive. When specifying an internal table, you can distribute the syntax over multiple rows.
If column_syntax is initial when the command is executed, columns is implicitly set to * and all columns are read.
If columns are specificied dynamically without the SINGLE addition, the resulting set is always regarded as having multiple rows.
Notes
Before Release 6.10, you could only specify an internal table with a flat character-type row type for column_syntax with a maximum of 72 characters. Also, before Release 6.10, if you used the DISTINCT addition for dynamic access to pool tables or cluster tables, this was ignored, but since release 6.10, this causes a known exception.
If column_syntax is an internal table with header line, the table body and not the header line is evaluated.
Example
Read out how many flights go to and from a city. The SELECT command is implemented only once in a sub-program. The column data, including aggregate function and the data after GROUP BY, is dynamic. Instead of adding the column data to an internal l_columns table, you could just as easily concatenate it in a character-type l_columns field.
PERFORM my_select USING `CITYFROM`.
ULINE.
PERFORM my_select USING `CITYTO`.
FORM my_select USING l_group TYPE string.
DATA: l_columns TYPE TABLE OF string,
l_container TYPE string,
l_count TYPE i.
APPEND l_group TO l_columns.
APPEND `count( * )` TO l_columns.
SELECT (l_columns)
FROM spfli
INTO (l_container, l_count)
GROUP BY (l_group).
WRITE: / l_count, l_container.
ENDSELECT.
ENDFORM.
SELECT - aggregate
Syntax
... { MAX( col )
| MIN( col )
| AVG( col )
| SUM( col )
| COUNT( DISTINCT col )
| COUNT( * )
| count(*) } ... .
Effect
As many of the specified column labels as you like can be listed in the SELECT command as arguments of the above aggregate expression. In aggregate expressions, a single value is calculated from the values of multiple rows in a column as follows (note that the addition DISTINCT excludes double values from the calculation):
MAX( col ) Determines the maximum value of the value in the column col in the resulting set or in the current group.
MIN( col ) Determines the minimum value of the content of the column col in the resulting set or in the current group.
AVG( col ) Determines the average value of the content of the column col in the resulting set or in the current group. The data type of the column has to be numerical.
SUM( col ) Determines the sum of the content of the column col in the resulting set or in the current group. The data type of the column has to be numerical.
COUNT( DISTINCT col ) Determines the number of different values in the column col in the resulting set or in the current group.
COUNT( * ) (or count(*)) Determines the number of rows in the resulting set or in the current group. No column label is specified in this case.
If you are using aggregate expressions, all column labels that are not listed as an argument of an aggregate function are listed after the addition GROUP BY. The aggregate functions evaluate the content of the groups defined by GROUP BY in the database system and transfer the result to the combined rows of the resulting set.
The data type of aggregate expressions with the function MAX, MIN or SUM is the data type of the corresponding column in the ABAP Dictionary. Aggregate expressions with the function AVG have the data type FLTP, and those with COUNT have the data type INT4. The corresponding data object after INTO or APPENDING has to be selected accordingly.
Note the following points when using aggregate expressions:
If the addition FOR ALL ENTRIES is used in front of WHERE, or if cluster or pool tables are listed after FROM, no other aggregate expressions apart from COUNT( * ) can be used.
Columns of the type STRING or RAWSTRING cannot be used with aggregate functions.
When aggregate expressions are used, the SELECT command makes it unnecessary to use SAP buffering.
Null values are not included in the calculation for the aggregate functions. The result is a null value only if all the rows in the column in question contain the null value.
If only aggregate expressions are used after SELECT, the results set has one row and the addition GROUP BY is not necessary. If a non-table type target area is specified after INTO, the command ENDSELECT cannot be used together with the addition SINGLE. If the aggregate expression count( * ) is not being used, an internal table can be specified after INTO, and the first row of this table is filled.
If aggregate functions are used without GROUP BY being specified at the same time, the resulting set also contains a row if no data is found in the database. If count( * ) is used, the column in question contains the value 0. The columns in the other aggregate functions contain initial values. This row is assigned to the data object specified after INTO, and unless count( * ) is being used exclusively, sy-subrc is set to 0 and sy-dbcnt is set to 1. If count( *) is used exclusively, the addition INTO can be omitted and if no data can be found in the database, sy-subrc is set to 4 and sy-dbcnt is set to 0.
if helpful reward points

A basic query with respect to using Message Selectors in JMS

Hi
When i am going MEssage Selectors topic in web , it seems very confusing for me .
I have written a simple JMS Application based on Weblogic as my Queue .
I have two Java Files one for Message Producer and another file acting as Message Consumer using MDB
I have a basic TextMessage with some header properties in my Producer file .
Please tell me in what file should i put MessageSelector ??.
Thanks for reading .
Please clarify my query on this .

Thank you very much .
I found the code of a MDB making useage of a Selector .
*<message-driven>*
* <message-selector>shirtType = 'polo'</message-selector>*
* </message-driven>*
Assume that i written a MDB that listens to particular type of Messages (Polo in this case ) .
Please tell me what happens to other messages in the Queue that were never listened by the MDB .
Thank you .

A lot of trace events on a basic query

Hi All,
We are struggling with a strange olap engine behavior on resolving basic MDX query on any measure
even without any dimensions attributes involved. (on clear cache)
Enormous amount of Starting/Finishing Reading from Aggregation 0 emitted. (Progress Report Event; 14-Query sub event).
We commented out all mdx script and enabled one native measure (count),
but this take no effect. The product version is 2012 sp2.
Has anyone ever met this issue before?

Hi Dimitri,
According to your description, you can't execute MDX query at all. Right?
In this scenario, pelase make sure the SSAS database is not corrupt. Re-deploy your cube and see if any error is thrown. Check the data in tables which are involved in dsv. You can use SQL query to join those tables and query the data in SSMS database engine.
Go to SQL Server Configuration Manager and Services to see if SQL Server Analysis Services is running. And make sure the log on account has suffcient permission. If possbile please share some sample query and the detail error message.
Simon Hou
TechNet Community Support

Incomplete Database Recovery

Can anyone help me how to do a Incomplete recovery database recovery (Change/Time/Cancel) based.
I tried by looking documentation , but always I end up with error.
Many Thanks
-Prabhu

Hi,
Would you please post what you do and what error you have?
Michel

Basic query (in internationalization)

I am new to internationalization
I dont know how to run this file. i compiled this.
I have a basic code taken from sun site.
import java.util.*;
public class I18NSample {
static public void main(String[] args) {
String language;
String country;
if (args.length != 2) {
language = new String("en");
country = new String("US");
} else {
language = new String(args[0]);
country = new String(args[1]);
Locale currentLocale;
ResourceBundle messages;
currentLocale = new Locale(language, country);
messages =
ResourceBundle.getBundle("MessagesBundle",currentLocale);
System.out.println(messages.getString("greetings"));
System.out.println(messages.getString("inquiry"));
System.out.println(messages.getString("farewell"));
property files are
greetings = Hello.
farewell = Goodbye.
inquiry = How are you?
greetings = Hallo.
farewell = Tsch��.
inquiry = Wie geht's?
greetings = Hello.
farewell = Goodbye.
inquiry = How are you?
greetings = Bonjour.
farewell = Au revoir.
inquiry = Comment allez-vous?
where to place these file
i dont know how to use these files.
will anyone help me
i am new to this

You missed the next part, Running the Sample Program.

Incomplete DB Recovery, Basic query

Similar Messages

Maybe you are looking for