Incomplete Export

I have a movie clip. It is about 15 minutes long. Captured from a DV tape. Slightly modified, but nothing intense. When I export it (AVI, NTSC-DV compression, 23.97 fps, 320 X 240) it won't export the entire clip. It only exports 1 minute 13 seconds every time I try. Any suggestions? Thanks in advance.
Regards
FCP 5    

How big is the exported file? If it's 2 gigs, it does point to some sort of file size limitation as many pc formatted drives have a 2 gig file size.
I banged my head against the wall repeated a few months ago trying to export a embedded flash video which kept exporting an incomplete file. it turned out there was a limitation to the number of frames possible for that particular flash flavor.

Similar Messages

  • Incomplete Export data--No FI document generated

    Hi,
    Sales order created with subsequent delivery.
    Picking/ PGI done.
    Billing document generated.
    But it does not generates any accounting document.
    Gives message The accounting document has not yet been created.
    What could be missing here ??
    Thx in advance
    Regards,
    manOO

    Hi,
    Agreed.How do you differentiate domestic and export customer ?
    If I want to know my customer whether it's export or domestice where should I check it ?
    Account groups genearlly differentiates them but can you suggest which settings I should check.
    My system suggests me that this customer is using domestic acct group
    Thx in advance
    Regards,
    manOO

  • Motion incomplete export

    Greetings all,
    I'm having an issue exporting from Motion 3. I'm working with an animation that is 3min45sec long, consisting of fairly high-res images and text, and a single camera that slowly tracks back away from them. Although the export seems to go ok, when I play back the exported file, it consistently stops short of the end, by almost two minutes. I tried exporting just the last two minutes and thirty seconds, and it will export ok for a while, but again the file just stops well short of the end, although not in the same place as when I tried the full export. Any ideas on what might be causing this?
    I've got Motion 3 running on a 8-core G5.
    Thanks.

    Motion loads everything into memory, unlike Final Cut Pro which streams media from disk. If you figure 1 megabyte per Standard Def frame, that's 30 megabytes per second or 1.8 gigabytes per minute.
    If you go HiDef, you've gotta figure more. 1920x1080x3 bytes per pixel = 6+megabytes per frame or 180 megabytes per second, 10 gigabytes per minute.
    Anything that doesn't fit into physical RAM has to be paged out to disk as virtual memory.
    You got 40 gigabytes laying around?
    Now, this is just back-of-the-envelope figuring, I'm not sure how close it comes to reality, but it should give you some idea. I like to keep my Motion projects under 30 seconds. Way under if possible.
    Patrick

  • Incomplete exporting.

    When I attempt to export an album or project to Facebook or Snapfish, not all the pictures export.  Even when I access system preferences to change the wallpaper, not all the pictures show up.  Help!

    Please exactly specify your hardware, OS, Aperture version, workflow, etc. so we can help you to troubleshoot your issue.
    TIA
    -Allen Wicks

  • Incomplete export/import

    hi all,
    I work with version 4.0.2.00.07 more than a year without problems.
    Since a few weeks (I didn't change something) if I export an application from one workspace "A" and import this in another workspace "B" I lost some settings and parts. After I import the application I don't have an authentication scheme, no plugins and the settings for tabs are wrong.
    If I open the export-sql-file in an editor I see the authentication scheme and the code for the plugin. but it isn't in the imported application.
    If I import the export-file in the beginning workspace "A" all is ok.
    any hints?
    best,
    carsten
    edit: If I import an old export-file, e.g. from july this year, also all is ok. The theme is also damage. Thats the reason for the wrong tab. If I run my application the current theme is showing. But in the shared components there is no theme in use. If I'll like to install the same them from the repository I get the following error message:
    "ORA-00001: unique constraint (APEX_040000.WWV_FLOW_BUTTON_TEMP_IDX2) violated
    Unable to create theme."
    An other theme I can install and the tabs are correct.
    Edited by: cc13 on 27.08.2012 10:29
    Edited by: cc13 on 27.08.2012 10:43

    Hi Casten,
    it looks like you have an issue with constraint violations.
    Try the following installation script:
    begin
        apex_application_install.generate_offset;
    end;
    @H:\file_name.sqlfor the full documentation of this and other options see http://docs.oracle.com/cd/E17556_01/doc/apirefs.40/e15519/apex_app_inst.htm#BABFDGCG
    regards,
    Erik-jan

  • Incomplete Export w/Compressor

    I'm new to Compressor. Everything makes sense except the export is acting odd: I am exporting several separate projects (under 15:00 minutes) directly from FCP to Compressor 2.0.1, for DVDSP. The shortest project (5:00) exported fine but only a portion of others export or they don't export at all.
    I've tried to start over by renaming the projects in FCP and setting new destinations but no files show up - instead the modify date/time on my original export if updated. I have 5GB+available on my drive which seems like plenty of room. Am I goofing up or is there something buggy with my software? thanks!

    The first thing is that you should really update Comressor to at least 2.1 (currently 2.3) as there were some major improvements over the version you are currently using.
    In FCP make sure that all the media is available to the project (nothing is offline).
    As a test you can Export a QT reference move:
    File > Export > QuickTime Movie
    Leaving the "self-contained" checkbox deselected.
    Then import that movie into Compressor and apply your preset.
    BG

  • CS4  Won't export entire timeline

    Hi again.  This is another "first" for me.  I have a  66 min timeline that I am trying to export to DVD, mpg2 using the Media Decoder.
    I have searched and checked the "Help" areas but found no help.
    I carefully made sure the sliders just above the timeline were set to include the entire timeline. These are actually the two sliders found on the vertical
    hashmarks on the timeline.
    Out of the 66 minutes to be exported, only 44 minutes of the video track  was exported.  Here's the
    strange part,  all 66 minutes of the audio track  DID export just fine.
    Suggestions appreciated.
        Tks,  Tom B.

    Yes, there are four sequences butted together.  It is during the middle of the last sequence that it stops exporting video, audio exports fine.
    Here's what I have done.  i exported the fourth sequence by itself.  that's the sequence that stops exporting when the four sequences are
    dropped onto the timeline together.  It exported fine and all 16 minutes have exported. 
    Now then, I can open Encore and drop both the incomplete exported video onto the timeline and the final exported sequence video at the end of the same timeline, however, I need to delete about 5 minutes of the first video since there is now a repeat of about 5 minutes of that asset.  How can I shorten the first exported video, now on the Encore timeline, so the two exported clips make the correct complete 66 minute video??  I know this is as clear as "mud".  Ask if this is not real clear.

  • Problem with deleted delivery and cancellation invoice

    I have a problem. I have to resolve a cancellation invoice with error saying Missing Export Data. However, when i try to update this invoice, the fields to be updated are all shaded out meaning they cannot be changed. now the problem is, the delivery where the cancellation invoice retrieves its data shows a status of Archived. but when we tried to find it, it seems that it has already been deleted though the status shows Archived. I do not know how they have managed to delete this delivery with the Goods Issue still active, even with the Invoices. All I know is that the user who has deleted the delivery has made a mistake for this.
    Can anybody please help me?

    Can you please check the OSS note 908748. It may be of some help to you. The contents are pasted here.
    Symptom
    A cancellation document cannot be transferred to accounting because the system has issued error message VF 072:
    'Document 90001234 has been saved (foreign trade data incomplete)'.
    However, the underlying business process concerns domestic business and the invoice to be cancelled does not contain any foreign trade data.
    Other terms
    VF02, VF11, VF072, cancellation, EXNUM, incompleteness, export data
    Reason and Prerequisites
    Prerequisites:
    This is a partial cancellation document.
    When you create the cancellation document, you inadvertently branch to the foreign trade data and choose 'Set'.
    Reason:
    When you choose 'Set' in the foreign trade data, the system assigns an export number, which then results in an incomplete document because the other export data is missing.
    Solution
    Implement the attached correction.
    There is no provision to take account of a cancellation scenario in which foreign trade data can be entered or changed.
    This correction deactivates the ready for input status of the 'Set' button in order to prevent the system from inadvertently assigning an export number.
    In this context, refer also to Note 354222.

  • Indesign CS6 not so kosher

    Hello,
    Please could somebody help - this is driving me nuts.
    I am Running Indesign CS6.0.1 on an Imac (3ghz - 4gb Ram - Intel Core 2 Duo) using Lion 10.7.3.
    I have designed a Catalogue for my company which is 85 pages. This is the first catalogue I have produced on CS6, but have been using Indesign for many many years with no problems.
    The problem I am facing is that when I try to print the Book of the catalogue, it spools the first 40 odd pages with no problem, but then seems to randomly get stuck on subsequent pages. Like I said the page it gets stuck on is random, sometimes page 47, sometimes page 55 etc. I have gone into linked files and edited and fixed anything that I thought might be causing problems, to no avail.
    I tried to convert to PDF, to then print via Acrobat. The same problem arises. Randomly gets stuck on pages.
    I have now tried to split print the catalogue, ie first half, then second half.  The first half (33 pages), has printed with no problem, but the second half is now stuck on page 60.
    In addition to this. on certain occasions, it will just crash. This to seems to be random, as I have been busy with the exct same actions.
    I have deleted preferences & saved data, updated to latest version. I have tried to print on another colleague's Mac Pro (he has 6gb Ram - same OS & indesign version), still with no change in result.
    Other than reisntalling lower verson of Indesign, and coverting all my documents, I am at my wits end on how to solve this problem.
    If anybody could help - I would greatly appreciate it.
    Thanks
    Grant

    Hi Dov,
    Thank you for your quick response - it is greatly appreciated.
    To clarify a little - The problem is occurring when I try to print directly to the Printer from Indesign. But I have been unable to complete the PDF export, as the same problem occurs when exporting, as when printing. I.e. The progress gets stalled on random pages. So I have been unable to try and print form Acrobat, or to even view the PDF document. (incomplete export).
    The Printer we are using is a Canon iR ADV C5051 Laser printer.
    I completely agree with you on need or lack there of, of re-installing.
    I have just tried to split print the Book in 3 sections. To test if there are any problems in any particular parts of the book / documents, and whittle down the problem areas. This has spooled through & printed with no problems.  Unfortunately this is not a practical way forward for me, when it comes time for me to print these catalogues out in bulk. (I print several hundred catalogues).
    Please see below for the Link to the PDF catalogue. Again I have had to export the Book in sections and then combine it in Acrobat.
    Link: http://updates.musgrave.co.za/Musgrave/COMBINED_CATALOGUE.pdf
    Thanks again for your timeous response.

  • Foreign trade error Urgent!!!

    I have a Canceled Invoice that we are trying to post to accounting but it's not posting to accounting it's giving this error msg......
    _Foreign trade data incomplete?_ i cannot make the changes in the...mode of transport and Domestic mode transport since this fields are grayed out?
    What should i do for the invoice to post? where can i enter the missing data? since we can only make this changes in an invoice... text, Acct Assignt grp, Pricing cond, and output type.
    And is there anyway we can delete a canceled invoice document? and whats the procedure for it?

    HI Ann,
    I have a very similar problem. the only difference may be that the delivery in my invoice has been deleted already, therefore the reference document can no longer be found. check in the foreign trade header (organization sub-tab) if the reference document is missing its entry. if this is missing, then the problem lies in the EIKP table not being updated for the foreign trade. the invoices get its information for foreign trade from the deliveries so in my case, since the delivery was already deleted, there is no way we can update this. it has become a nuisance data, yes.
    however, if your delivery is still existing, then please read this OSS note :
    908748. It may be of some help to you. The contents are pasted here.
    Symptom
    A cancellation document cannot be transferred to accounting because the system has issued error message VF 072:
    'Document 90001234 has been saved (foreign trade data incomplete)'.
    However, the underlying business process concerns domestic business and the invoice to be cancelled does not contain any foreign trade data.
    Other terms
    VF02, VF11, VF072, cancellation, EXNUM, incompleteness, export data
    Reason and Prerequisites
    Prerequisites:
    This is a partial cancellation document.
    When you create the cancellation document, you inadvertently branch to the foreign trade data and choose 'Set'.
    Reason:
    When you choose 'Set' in the foreign trade data, the system assigns an export number, which then results in an incomplete document because the other export data is missing.
    Solution
    Implement the attached correction.
    There is no provision to take account of a cancellation scenario in which foreign trade data can be entered or changed.
    This correction deactivates the ready for input status of the 'Set' button in order to prevent the system from inadvertently assigning an export number.
    In this context, refer also to Note 354222.

  • Group Key for IN customers?

    Hi Friends,
    While creating a customer using XD01 for country INDIA "IN", the message I get while saving is
    " All "IN" customers should have a group key ". However, I am able to create the custmer when I give other country like "DE". Incase I do that for the sake of completing the master record, I am not able to post the billing document to accounting. Its pointing out at incomplete export data.
    What is this Group Key and where do we maintain it?

    Hi,
    Group key can be given in "Control Tab" in Customer General data
    Group key : If the customer or the vendor belongs to a group, you can enter a group key here. The group key is freely assignable.
    If you create a matchcode using this group key, group evaluations are possible.
    Please let me know if you have any concerns,
    Hope understood and assign points if you get through.
    Thanks,
    Vasu..

  • Invoice is incomplete due to export data

    dear all
    my invoice is incomplete due to export data
    so i could not generate the accounting data for the invoice can any one suggest me wat will be the solution and wat i ve to fill in export data...
    the following are the error comming in eaach step
    <b>Document 90000003 has been saved (foreign trade data incomplete)
    Message no. VF072
    Diagnosis
    The billing document you have edited contains foreign trade data. These are however not complete.
    This means that the document cannot be transferred to accounting (FI).
    System Response
    The system issues a message.
    Procedure
    Maintain the incomplete foreign trade data. Then you can transfer the billing document to accounting (FI).</b>
    please suggest me the way
    with regards
    subrat

    the incomplition comming for export dta is as follows
    <b>business transaction type for foreign trade
    export import procedure for foreign trade
    comodity code import code for foreign trade</b>
    but wen i m clicking the drop down menu the fields having no values
    so wer to maintain data for this fields
    please help me
    with regards
    subrat

  • Incomplete slideshow export

    I am using iPhoto 9.5.1 on a late 2011 MacBook Pro, OS X Mavericks 10.9.2. I created a slideshow containing 297 photos, sorted by date. I added music to the slideshow. I was able to successfully export the slideshow in standard definition. However, when I tried to export it in 720 and 1080 high definition, the export was incomplete. The exported slideshow is four minutes shorter than the successful export in standard definition. When the slideshow reaches a certain point, it reverts to the first photo and stays there until finally resuming showing other photos. I can't find any answers for this problem. Can anyone help?

    How much free space do you have on your boot drive?  Turn off all Energy Saving and try exporting again.
    Have you added music to the slideshow?  Did all of the music come thru OK with the standard definition export?
    OT

  • Exporting file to pdf from internet, the document its in blank or incomplete

    When i export a file to pdf from internet, the document is in blank or incomplete. Its the same if i donwload in a PC or opening online. The trouble is only in this PC, and i try with diferent browsers.
    I try deleting temporary files, upgrading a latest version of Reader and modifying the security configuration in the browser.
    Any idea?

    Hi da23841142,
    What are you using to export the file to PDF? Or, are you simply downloading a PDF file from the Internet, and then trying to view it in Reader? What version of Reader are you using, and are you on Mac OS or Windows?
    Best,
    Sara

  • InDesign CC / Cloud Fonts - Incomplete Font warning, does not export font when Packaging?

    I'm using a new font from the creative cloud.  I  packaged my project and the fonts showed "incomplete fonts" and then didn't export the font, into the font folder, when packaging.  There is an AdobeFnt15.lst file in the fonts folder, which I'm not sure about?  If this is the case, how will I deliver my project to my printer when it is finished?

    If you downloaded Typekit fonts from the Creative Cloud (the ones available from the Fonts menu in the Creative Cloud Desktop app), they are not packaged. They are only licensed to Creative Cloud subscribers or Typekit subscribers. They can be embedded in a PDF file or in an EPUB file or in a DPS project.
    So you have two options: (1) Given the popularity of the Creative Cloud, your printer should have at least one CC subscription, then they can download  the fonts you're using. In fact, it's a relatively automatic process and I describe in the linked blog post below; or (2) you can create a PDF file they can print from.
    Here's an article on how it works:
    Typekit Update in InDesign CC 9.2

Maybe you are looking for