Incomplete Image ERROR HELP!!

So I'm stuck I have tried to burn a wedding dvd for a couple three times now and get the same error everytime. I have a 17" Macbook Pro with a phillips external hard drive that is holding the data. Everytime I burn the dvd once its done and has spat out the dvd is says image incomplete. Plays almost through the whole movie in the dvd player but then freezes towards the end. Please someone help me I'm absolutley stuck and need to get this fixed! THANK YOU!

Hi
Need more info:
a. Free space on internal (start-up) hard disk ?
b. How is the external hard disk formatted ?
c. What brand of DVD disks ?
d. Type of DVDs -R or +R or +/-RW ?
e. QuickTime version ?
f. Did You try to make a DiskImage and how did this play ?
Yours Bengt W

Similar Messages

Scratch disk error plus canvas image error help

so i recently restored my computer back to factory settings .. so my computer doesnt even have any new downloaded app .. i download photoshop cs6 now im getting scratch disk errors ..which i dont see possible if my computer doesnt have anything on it (besides what it came with) my hard drive has 276 gb i only used 33 .. so why am i having this problem?? i made an external hard drive and that has 8 gb ... also its moving very slow .. also its telling me i cant make an new canvas size 1920 x 1020 with an resloution of 300 which i know is possible because i done it before so if anybody can tell me what im doing wrong or how i can fix this problem please .. i need photoshop for work . and this is impossible .. im using windows 7 toshiba

Without going into much detail, the scratch can grow to humongous sizes. In general, figure on 50 to 100 times or more the size of your largest file multiplied by the number of files you have open.
My preference is not to work with less than 200 GB of contiguous, unfragmented available drive space for scratch on a physically separate, dedicated, internal hard drive as my primary scratch disk.
Also consider that if you rely on your boot drive for primary scratch disk, Photoshop's scratch is sharing that space with the swap files of the OS.
That's one of the issues, and it can be be made much worse if you have a faulty drive. A badly fragmented drive would also be a big problem.
As for that external drive with a pathetic 8 GB of remaining available space, you should back it up, store it in a safe place, a get a new one. Any time any one of your hard drives gets to be 80% full or more, you are already in a heap of problem. With that little space left, you should make sure it's not being used even as a secondary scratch disk.
Hard drive real estate is very cheap these days.

Missing images error. help needed

Hey,
Since i had an issue with having iPhoto library on Airport, i moved it back and rebuilt library etc.
All is fine but there are about five photos that have been lost which is fine.
I dont mind the loss of these photos, but id like to get rid of these error messages.
Please see screenshot attached.
S

"copy imported items to the iPhoto library" is checked.
It wasn't when these files were imported.
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

Display incomplete image: Premature end of JPEG file

Hello people,
My problem is that displaying an image with incomplete data works fine, apart from that the following error message is printed out: Premature end of JPEG file
The picture looks perfect (the missing part is rendered in gray), but I want to get rid of the error message.
//init
File jpegFile = new File("picture.jpg");
FileInputStream inputStream = new FileInputStream(jpegFile);
ByteArrayOutputStream outputStream = new ByteArrayOutputStream();
//step 1: downloading the image
byte buffer[] = new byte[bufferSize];
int bytesRead;
while( bytesRead = input.read( buffer ) ) >= 0 )
output.write( buffer, 0, bytesRead );
//step 2: create (and display) incomplete image (download not finished yet)
byte byteArray[] = outputStream.toByteArray();
Image img = Toolkit.getDefaultToolkit().createImage( byteArray );Thanks for help,
Martin

Recreate the JPG image in your graphics editor - it is
corrupted.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"wuest" <[email protected]> wrote in message
news:e20uth$pme$[email protected]..
> Have just used the assets panel for the first time...
tried to create a
> template... an image showed up and then this unending
message kept
> appearing
> ... "premature end of jpeg file" and no matter how many
times you click it
> stil
> keeps reappearing... please, can someone put me out of
my misery?
>
> thanks.
>

INCOMPLETE IMAGE

Hi, I'm a new entry, I'm italian so please excuse me for my bad english....
My problem is that when I burn a photo dvd whith iDVD the disc has correctly created but the program says "incomplete image" and it stucks.
Is there anyone can help me please?

Hello Linda:
Benvenuto alle discussioni!
Does the error say that there is not enough disk space?
Sue

I have the version of iPhoto that comes with my OS when I purchased my MacBook, but now I can't open it, because it says this, "You can't open the application "iPhoto" because it may be damaged or incomplete. Please help I have tons of family photos.

I have the version of iPhoto that comes with my OS when I purchased my MacBook, but now I can't open it, because it says this, "You can’t open the application “iPhoto” because it may be damaged or incomplete. Please help I have tons of family photos.

1 - the iPhoto application is an application and does not hole your photos - your photos are in the iPhoto library an dour normal daily backup will back them up so your photos are safe
2 - what exactly does the error message say? You probably need to reinstall the iPhoto application form the original source
3 - note that no version of iPhoto comes with any OS - iPhoto comes with all new Macs but not with any OS and most OS versions can run many different versions of iPhoto
LN

Error message "Save image error! Please check your profile"

Hi,
I have installed the second version of the Lens Profile Creator. When analyzing the images all is working fine and it is at the end where the following error message appears -
- Save image error! Please check your profile path and permission of the folder.
I have check and I cant anything that looks strange.
Have anybody seen this problem before ?
Thanks for any help solving this
/Mikael

Hi Simon,
Thank you, it was doing what you asked me when I realized that I had previous V1 file from ALPC in the structure.
Once I removed them It all worked well
Thanks
MIkael
Le 8 sept. 2010 à 04:15, simonsaith a écrit :
Please go to the ALPC preference dialog and see where is the default save profile location. Check if the folder exists on your system and whether you have permission to write to the folder.
-Simon
>

"Photoshop Elements10.0.exe - Bad Image" Error message

My Photoshop Elements 10 will no longer start.
I have been running Windows on my PC since initial installation and have not changed my set-up in any way, but now receive a "Photoshop Elements10.0.exe - Bad Image" Error message when trying to start my program. The error further reads c:Program Files 9x86)\Adobe\Elements 10 Organizer\amtlib.dll is either not designed to run on Windows or it contains an error etc. I have deactivated, removed and then reinstalled Photoshop Elements using my original discs and serial number, but continue to get the same message.
Any suggestions?

Hello,
Try doing a clean uninstall of the BlackBerry Desktop Software. Then reinstall it in an admin account on the PC. http://bit.ly/aMZYJL
Thank you
-DrP
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

DLL Image Error

After downloading iTunes 7.3, I keep getting the following error message:
DLL C:\Windows\system32\DCIMAN32.dll
is not a valid image. Please check this against your installation diskette.
What happens is iTunes opens, but without the skin, so I can see text but there's no white backround rendering it unusable. I tried every troubleshooting tool I use (e.g. registry cleaner) but nothing works. Si Ican't use iTunes , which is a massive problem if you have an iPod!
Nothing on the support pages quite relates, so I'd appreciate any help.

Just in case someone else is viewing this, I finally fixed this problem. If you are reading this, that probably means you have the same problem. There a tens of this "Bad Image" error Posts in this forum and in the Microsoft forum.
I believe that "Image" is the clue here, but it took me a very long time to figure that out.
Via a very circuitous route I ended up at the Intel support site (a friend suggested this). There you can download a drive update utility, which I did. When it was run, it informed me that it thought I have a vendor customized Graphics driver and (thank you very much) I should be careful about downloading a new driver from them. Therefore I did not. However, that indicated to me that there could be a Graphics Driver problem.
I then recalled that in my many and various travels across the internet reading something about a "Recovery Manager" that HP installs in the product (again, thank you very much). HP customer support has a set of instructions on how to use the tool on their website: (Using Recovery Manager to Restore Software and Drivers (Windows 7).
I ran the Manager and replaced the Intel Graphics Drive. Problem solved.
I hope that this may be of help to others.

Invalid image error when saving to pdf

I keep getting an invalid image error when saving a MS Publisher file as a pdf. Can anyone help with solving this issue?

You need to provide system and version info and explain how you actualyl produce the PDF. Unless you use the Acrobat PDF printer, I don't see how Adobe software would be involved in any of this, as recent versions of MS Office products can save PDFs natively...
Mylenium

PSE 8 Organizer 'Bad Image' Error Message

I have PSE 8, PS Premier 8 and LR 4 insta;lled and haven't had any problems with them. Yesterday I tried to open PSE 8 and received a 'Bad Image' message that stated
"C\:Program Files (x86)\Adobe\Elements Organizer 8.0\amtlib.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support.'
However, I went to My Pictures, selected a file that I had edited in PSE 8 a few weks ago, right clicked on Open With PSE 8 Editor and there it was. When I right clicked on Open With PSE 8 Organizer, I got the same error message as shown above. I also tried openiong Organmizer through Editor ald also got the same error shown above.
How do I resolve this? I'm running WIN 7 Pro, DELL XPS 8300.

Here is an update and a workaround. I hope it's helpful to others as well.
After receiving lots of views, but not receiving any suggestions, I decided to uninstall PSE 8, but kept getting an ERROR 1316 message. After additional searching I found MicrosoftFixIt, a free download that enabled me to uninstall PSE 8 and Premier Elements 8, where I had encountered the identical amtlib.dll BAD IMAGE error message described in my initial post.
I then reinstalled both programs, and now everything is fine.
Case CLOSED

Bad Image error - igdumdim32.dll

Somehow igdumdim32.dll got onto my Windows 7 system. From what I can find, this is a Windows 8 dll. Keep getting error message: "C:\windows\system32\igdumdim32.dll is either not designed to run on Windows or it contains an error....." Very irritating and does disrupt some functionality. What do I do?
Let me describe the problem as completely as possible.
The "error" message reads: "C:\Windows\system32\igdumdim32.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator...."
The "error" message occurs in several instances. It occurs when I attempt to open a video on Foxfire. It comes entitled "FlashPlayerPlugin_15_0_0_223.exe - Bad Image." When I click OK, the message reappears. It appears 3 times in total and after I’ve clicked OK each time the video will run properly, except it will not go to full screen. This does not happen with Internet Explorer. The same message occurs when opening certain programs such as: Quicken (entitled qw.exe - Bad Image), QuickTime Player (entitled QuickTimePlayer.exe - Bad Image), Garmin Express (entitled Express.exe - bad image) and others. In all cases the message come up 3 times and once I've clicked OK to all the program runs normally.
I've tried to find igdumdim32 in windows\system32 but it's not there. There is a igdumdim64 there. However, I have found it in C:\Windows\System32\DriverStore\FileRepository\5.inf_a….etc. It is also in C:\Windows\SysWOW64.
This question was solved.
View Solution.

Just in case someone else is viewing this, I finally fixed this problem. If you are reading this, that probably means you have the same problem. There a tens of this "Bad Image" error Posts in this forum and in the Microsoft forum.
I believe that "Image" is the clue here, but it took me a very long time to figure that out.
Via a very circuitous route I ended up at the Intel support site (a friend suggested this). There you can download a drive update utility, which I did. When it was run, it informed me that it thought I have a vendor customized Graphics driver and (thank you very much) I should be careful about downloading a new driver from them. Therefore I did not. However, that indicated to me that there could be a Graphics Driver problem.
I then recalled that in my many and various travels across the internet reading something about a "Recovery Manager" that HP installs in the product (again, thank you very much). HP customer support has a set of instructions on how to use the tool on their website: (Using Recovery Manager to Restore Software and Drivers (Windows 7).
I ran the Manager and replaced the Intel Graphics Drive. Problem solved.
I hope that this may be of help to others.

Itunes.exe bad image error

I have been trying to get iTunes up and running for months now with no luck what so ever. I'm running on Windows Vista Service Pack 2.
On opening iTunes I get the error message
'iTunes.exe - Bad Image
C:\WINDOWS\system32\softpub.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support." '
After clicking Ok a window appears saying itunes has stopped working and that its trying to find a solution. only button is 'close program'. After closing the program a message appears in the bottom right of the screen saying DEP (Data Execution Protection) has closed itunes to protect my computer.
As well as this problem I have been unable to perform a windows update. It has been giving various error codes which I tried to fix using the windows Fixit programs and other fixes but both problems persisted.
I looked thorugh a lot of discussions on different forums online and have tried various things but to no avail. At first I uninstalled iTunes and reinstalled it (I have now done this around twenty times after trying different fixes) and it downloaded and installed perfectly every time but whenever I tried opeing it I would get the bad image error message.
I have also tried running system file checker (sfc scan) by running command prompt as administrator and it says
'Beggining system scan. This may take some time.
There is a system repair pending which requires a reboot to complete. restart windows and run sfc again.'
But when I restart windows and run sfc again it gives exaclty the same message. I repeated this on numerous occasions after trying other fixes but always gave the same message.
I also read that replacing the softpub.dll file in the system32 file could be a fix, so I downloaded a new file but when I tried to either rename the old one, move it or do a move and replce with the new file I was told that I couldn't because it needed the administrators permission. I am the only user and was logged in with administrators rights so don't know why it asked and when I tried to give permission it says
' Destination Folder Acces Denied
You need permission to perform this action.'
It gives the option to retry but this just produces the same message.
Any help would be massively appreciated.

Did a restart and there are a few errors and warning listed below,
error 10016 - Distributed COM
The application-specific permission settings do not grant Local Launch permission for the COM Server application with CLSID
{C97FCC79-E628-407D-AE68-A06AD6D8B4D1}
to the user NT AUTHORITY\LOCAL SERVICE SID (S-1-5-19) from address LocalHost (Using LRPC). This security permission can be modified using the Component Services administrative tool.
warning 7 - Kernel-Processer-Power
The speed of processor 1 is being limited by system firmware. The processor has been in this reduced performance state for 71 seconds since the last report.
warning 7 - Kernel-Processer-Power
The speed of processor 0 is being limited by system firmware. The processor has been in this reduced performance state for 71 seconds since the last report.
error 7000 - Service Control Manager Event Log Provider
The Parallel port driver service failed to start due to the following error:
The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.
error 10016 - Distributed COM
The application-specific permission settings do not grant Local Launch permission for the COM Server application with CLSID
{C97FCC79-E628-407D-AE68-A06AD6D8B4D1}
to the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from address LocalHost (Using LRPC). This security permission can be modified using the Component Services administrative tool.
warning 7044 - Service Control Manager Event Log Provider
The following service is taking more than 4 minutes to start and may have stopped responding: Avira Real-Time Protection
Contact your system administrator or service vendor for approximate startup times for this service.
If you think this service might be slowing system response or logon time, talk to your system administrator about whether the service should be disabled until the problem is identified.
You may have to restart the computer in safe mode before you can disable the service.
warning 3004 - windows defender
Windows Defender Real-Time Protection agent has detected changes. Microsoft recommends you analyze the software that made these changes for potential risks. You can use information about how these programs operate to choose whether to allow them to run or remove them from your computer. Allow changes only if you trust the program or the software publisher. Windows Defender can't undo changes that you allow.
For more information please see the following:
Not Applicable
           Scan ID: {C9F59478-26AB-4B82-BE2B-2386B5269205}
           User: BILL\Cust
           Name: Unknown
           ID:
           Severity ID:
           Category ID:
           Path Found: driver:RapportIaso;file:c:\programdata\trusteer\rapport\store\exts\rapportms\ba seline\rapportiaso.sys
           Alert Type: Unclassified software
           Detection Type:
error 10016 - Distributed COM
The application-specific permission settings do not grant Local Launch permission for the COM Server application with CLSID
{C97FCC79-E628-407D-AE68-A06AD6D8B4D1}
to the user NT AUTHORITY\LOCAL SERVICE SID (S-1-5-19) from address LocalHost (Using LRPC). This security permission can be modified using the Component Services administrative tool.
error 10016 - Distributed COM
The application-specific permission settings do not grant Local Launch permission for the COM Server application with CLSID
{C97FCC79-E628-407D-AE68-A06AD6D8B4D1}
to the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from address LocalHost (Using LRPC). This security permission can be modified using the Component Services administrative tool.
From checking the times I saw the message appear just before the last two error messsages.
I have also recently run some malware software which has quarentined about 20 files and since then the speed has been getting slower and slower to the point that the last restart took 20 mins

AcroMissingCompWClass Acrobat.exe Bad Image error message

Hi, I have a Windows 7 PC and InDesign, IIustrator CS4. When I try to print I get AcroMissingCompWClass Acrobat.exe Bad Image error message. Has anyone come across this?

My Acrobat 9 Pro freezes constantly. Seeing a pdf inside mutiple browser is not possible. Most of the time Acrobat 9 Pro and Acrobat Reader X starts within 5 min! As soon as I do anything, the top bar that shows "File", "Edit" etc. dissapears and averything freezes! Security software with possible firewalls I've uninstalled. Un- and re-installing Acrobat doesn't change anything. I'm using MS Windows XP, running Adobe CS4. Making any pdf's is no problem. I just can't see them. I can open a pdf inside Illustrator but that goes page by page. Any help?

"Photoshop.exe - Bad Image" error [CS3]

Hi everyone,
I use Photoshop CS3, and every time I go to open a new document or open a saved document/picture/etc. I get a "Photoshop.exe - Bad Image" error that reads:
The application or DLL C:\WINDOWS\System32\spool\DRIVERS\W32X86\3\HPZRPP04.DLL is not a valid Windows image. Please check this against your installation diskette.
I have to "OK" this message 4 times until I am able to use the program. Any help would be greatly appreciated.
Thank you,
Peter

HPZRPP04.DLL
Have you tried updating or reinstalling your HP printer? If it's a network printer, try setting up a local printer as the default printer and see if that error goes away.

Incomplete Image ERROR HELP!!

Similar Messages

Maybe you are looking for