Incomplete Mapping!!

Why is the mapping so incomplete when compared to Google Maps. A large part of th eharbour in my home town is not even shown!!! Is this typical of the mapping in other parts of the UK and other countries?

Hi erik1963,
Welcome to Nokia Support Discussions!
For which phone is this? Were you able to download the complete map data for your current location? What particular location-based app are you referring to? Are you using Wi-Fi or mobile data connection when trying to access this app? Please provide us the details so that we can assist you further.
We hope to hear from you soon.

Similar Messages

  • Looking for a programmer

    Im looking for someone without a lot of experience to share knowledge with (no complete newbies, please). Im trying to create a MORPG and it'd be nice to work with someone who has at least a little experience with java. I personally, began learning java about a month ago and Im really committed to accomplishing my goal (Im 18 years old).
    my email is [email protected]
    Im intensively studing java and Im not a complete noob.
    Please, feel free to contact me at any time.
    PS: Ive already created a nice but incomplete map generating engine (tile based), and I incorporated movement.

    youll have more luck here: [java gaming|http://www.javagaming.org/forums/index.php]

  • Exception occurred when tried to install Weblogic Adapter for SAP 7.0

    Hi,
              I tried to install current available Weblogic Adapters for SAP 7.0 into weblogic platform 8.1 sp3, I got the following exceptions. Those exceptions can be reproduced when to deploy BEA_SAP_1_0_70.ear into a weblogic integration domain. Based on BEA Weblogic Adapter for SAP installation guide, there should be a new version of adapter for SAP, such as BEA_SAP_8_1.ear, but for some reason, I couldn't find it. The following are error messages, please help.
              Thanks,
              pg
              ------------- error message ------------------
              <Jul 28, 2004 3:01:41 AM EDT> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating Deploy task for application BEA_SAP_1_0_70.>
              <Jul 28, 2004 3:01:41 AM EDT> <Error> <Deployer> <BEA-149201> <Failed to complete the deployment task with ID 2 for the application BEA_SAP_1_0_70.
              weblogic.management.ApplicationException:
              Exception:weblogic.management.ApplicationException: Prepare failed. Task Id = 2
              Module: BEA_SAP_1_0.rar Error: Error parsing file at line: 36 column: 27. weblogic.xml.process.XMLParsingException: Error parsing file at line: 36 column: 27. The content of element type "map-config-property" is incomplete, it must match "(map-config-property-name,map-config-property-value)". - with nested exception:
              [org.xml.sax.SAXParseException: The content of element type "map-config-property" is incomplete, it must match "(map-config-property-name,map-config-property-value)".]
              org.xml.sax.SAXParseException: The content of element type "map-config-property" is incomplete, it must match "(map-config-property-name,map-config-property-value)".
              at weblogic.apache.xerces.parsers.AbstractSAXParser.parse(AbstractSAXParser.java:1189)
              at weblogic.xml.jaxp.WebLogicParser.parse(WebLogicParser.java:67)
              at weblogic.xml.process.ProcessorDriver.process(ProcessorDriver.java:154)
              at weblogic.connector.deploy.dd.xml.WeblogicRarLoader_Connector10.process(WeblogicRarLoader_Connector10.java:170)
              at weblogic.connector.deploy.dd.xml.DDUtil.processDDFile(DDUtil.java:380)
              at weblogic.connector.deploy.dd.xml.DDUtil.processWeblogicRaDD(DDUtil.java:218)
              at weblogic.connector.deploy.dd.xml.DDUtil.processDDFiles(DDUtil.java:126)
              at weblogic.connector.deploy.dd.xml.DDUtil.getConnectorDescriptor(DDUtil.java:602)
              at weblogic.connector.deploy.dd.xml.DDUtil.getConnectorDescriptor(DDUtil.java:577)
              at weblogic.connector.deploy.ConnectorModule.loadConnectorDescriptors(ConnectorModule.java:693)
              at weblogic.connector.deploy.ConnectorModule.loadDescriptor(ConnectorModule.java:202)
              at weblogic.j2ee.J2EEApplicationContainer.loadDescriptors(J2EEApplicationContainer.java:1379)
              at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1204)
              at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1051)
              at weblogic.management.deploy.slave.SlaveDeployer$ComponentActivateTask.prepareContainer(SlaveDeployer.java:2444)
              at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.createContainer(SlaveDeployer.java:2394)
              at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.prepare(SlaveDeployer.java:2310)
              at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer.java:866)
              at weblogic.management.deploy.slave.SlaveDeployer.prepareDelta(SlaveDeployer.java:594)
              at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java:508)
              at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:25)
              at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
              at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)

    Hello,
              You may have a lot of greif if this is the wrong version of adaptor for 8.1. I too was directed to this EAR file when looking for the 8.1 adaptor. The problem looks like it is in the weblogic-ra.xml file in BEA_SAP_1_0.rar. The some of the xml entries for <map-config-properties> loo incomplete:
              <map-config-property>
              <map-config-property-name>bselocation</map-config-property-name>
              </map-config-property>
              <map-config-property>
              <map-config-property-name>bseeis</map-config-property-name>
              </map-config-property>
              Are missing a value tags.
              You can try adding some dummy ones in order to get passed the SAX exception but you may run into more problems. (I was going to install this my self but never got round to it in the end).
              Good Luck

  • Bootstrap OID to AD

    I am trying to bootstrap our new OID with an existing AD. I have worked through many issues in trying to set this up. I am able to bind to and perform searches on the AD installation; however, I cannot seem to get the bootstrap to work properly. I installed diptester and used the default ActiveChg.map file except I changed the Domain mapping to the following:
    DomainRules
    ou=usersyccd,dc=fabnoa,dc=fabcorp,dc=fabrikam,dc=com:cn=users,dc=dwapp-bak,dc=com
    All other mapping rules were left as delivered.
    The bootstrap.aud log shows the following (summarized):
    MAPPING: Attributes - Start
    MAPPING : Source Change Record : ChangeRecord : ----------
    Changetype:
    ChangeKey: CN=Alfred E.. Newman,OU=UsersYCCD,DC=fabnoa,DC=fabcorp,DC=fabrikam,DC=com
    Attributes:
    Class: null Name: name Type: nonbinary ChgType: Value: [Alfred E.. Newman]
    Class: null Name: badpwdcount Type: nonbinary ChgType: Value: [0]
    Class: null Name: instancetype Type: nonbinary ChgType: Value: [4]
    Class: null Name: displayname Type: nonbinary ChgType: Value: [Alfred E.. Newman]
    My Question here is: Does the "Class: null" entry on each line indicate that there is problem? Or is the "Class: null" entry valid?
    The bootstrap log shows the following (summarized):
    INFO: [Wed Nov 30 14:07:12 PST 2005] Beginning the bootstrap process....
    ERROR: [Wed Nov 30 14:07:13 PST 2005] Writer Thread - 0 - Error occurred while mapping. Ignoring - CN=Alfred E.. Newman,OU=UsersYCCD,DC=fabnoa,DC=fabcorp,DC=fabrikam,DC=com
    ERROR: [Wed Nov 30 14:07:13 PST 2005] Writer Thread - 0 - null
    ERROR: [Wed Nov 30 14:07:13 PST 2005] java.util.EmptyStackException
    at java.util.Stack.peek(Stack.java:79)
    at oracle.ldap.odip.map.MapEngine.evalstack(MapEngine.java:1033)
    at oracle.ldap.odip.map.MapEngine.ConvertValue(MapEngine.java:713)
    at oracle.ldap.odip.map.MapEngine.mapAttribs(MapEngine.java:464)
    at oracle.ldap.odip.map.MapEngine.map(MapEngine.java:234)
    at oracle.ldap.odip.bootstrap.ODIBootstrap$WriterThread.run(ODIBootstrap.java:1036)
    INFO: [Wed Nov 30 14:07:16 PST 2005] Writer Thread - 0 #no of entries - 4
    INFO: [Wed Nov 30 14:07:16 PST 2005] Writer Thread - 0 #no of entries successfully processed - 0
    INFO: [Wed Nov 30 14:07:16 PST 2005] Writer Thread - 0 - Exiting....
    INFO: [Wed Nov 30 14:07:19 PST 2005] Cleaning up the source connector - 0....
    INFO: [Wed Nov 30 14:07:19 PST 2005] Cleaning up the destination connector - 0....
    INFO: [Wed Nov 30 14:07:19 PST 2005] Bootstrap process completed.
    Does anyone know why the errors are occurring?

    I found the problem and got the bootstrap to work. It appears there was a problem with the mapping file that came with DipTester. I did not type the mapping file in myself but instead used the mapping file (ActiveChg.map) that came with diptester. This file had four lines that appeared to be wrapping. However, upon further inspection I found that these lines were actually broken into separate lines thereby breaking up the attribute mapping. Upon performing the bootstrap the Integration daemon did not know what to do with these incomplete mapping rules thereby causing the errors I received in the log.

  • Network Management Category?

    Network Management missing from Product Category.
    Trying to find bugs for Ciscoworks LMS.

    Hi
    We have identified the root cause for the issue of Product series or category missing from Bug Toolkit.
    The issue was that in our upstream process was pulling/reading product information before second process completed its
    writing operation which results into incomplete mapping and resulting into product & category getting lost.
    The reason for the cause was change in the timing when two operations were scheduled to performed which resulted in the overlap.
    We are working on fixing the issue so it will not re-occur in the future, but in the meantime we have found an interim solution
    and as you see below, you can now search on "Network Management" product category again.
    One change to observe is that now Product Category is renamed to "Network Management & Automation", will get back to you on the reason for the change, but you should be able to see "Ciscoworks LMS" under "Network Management & Automation".
    Please let me know if this is product you were attempting to search for bugs and if it is working fine now.
    Thanks
    Arun

  • How do you contact the people at App World (for PlayBook)...

    Does anybody know who I need to talk to regarding App World (for the playbook). It really gripes me when you write a constructive review for an app, but the vender then removes it - surely, this should not be allowed (as it can lead to customers being mislead). I wrote the following review for the UK on-device GPS Map app, and guess what, it was removed!
    Not as impressed as i thought it would be for the following reasons:1. Incomplete maps - I've lived in my house for over ten years, yet my housing estate doesn't show up on the map (I wonder if this is the case elsewhere???)!
    2. Map scale - When I'm out and about, and zoom into the map, it doesn't always rescale itself; rendering the map useless.
    3. GPS Location - Once the App finds your location, and you then move, it doesn't then replot your movement on the map; to re-establish your position, you have keep repressing the button - very poor!
    4. Finally, the App just keeps crashing! Your using it, then it just switches off.
    Considering all the above, and the price of this App (£9.99!), I am really disapointed. Please fix the issues identified or refund asap.
    Cheers...

    Possibly the best bet is simply discussing it here.  RIM tends to like such feedback to be filtered through the forum, I presume because allowing much direct contact would overwhelm them (these days, with negative feedback!).  It's also reasonable in that it gives other people here (users like you, and developers) a chance to comment, expand the discussion, correct misconceptions, and so on.  As I understand it, RIM tries to monitor these forums, and in the cases where they may not notice a particular concern, some of the long-time participants have back-channels to escalate serious concerns to their attention.  I'm pretty sure they watch the "big picture", and if enough people complain about something, I'm pretty sure they take notice and engage in internal discussions to decide what to do about it.  (My main problem with this whole process is that they almost never provide any external feedback to us, even to let us know they recognize certain problems.  For example, the PlayBook rapid charger quality problems... it's incontrovertibly a defect, but there's been no sign of any recognition of that on their part.)
    That said, I sympathize with you.  I'm disgusted by that map vendor's products and behaviour, as I think they give the rest of us devs a bad name, not to mention "hogging" too much of the space in the Newest and Recently Updated lists, among other things.
    I'll note one thing, however, though I don't like the idea I might actually be seen as defending them.  On the map quality topic, those maps are actually using the OpenStreetMap data, aren't they?  (Visit http://openstreetmap.org)  If so, the quality of the data isn't something that vendor has control over... OSM is basically just like Wikipedia, in that the content is almost entirely generated by volunteers, people like you and I, who have chosen to contribute.  (I've edited OSM for my own town, adding many missing roads, fixing spelling errors, etc.) 
    If that's true, then I think the vendor ought to have made that very clear to their customers.  I'm not too surprised they did not, however, since I believe they knew they couldn't charge people $10 for a poor quality app that was merely giving you access to map data that cost the vendor nothing to provide.
    Have you tried contacting the vendor and demanding a refund?  It is possible for developers to request that RIM arrange a refund, as I understand it.
    Peter Hansen -- (BB10 and dev-related blog posts at http://peterhansen.ca.)
    Author of White Noise and Battery Guru for BB10 and for PlayBook | Get more from your battery!

  • Find my iPhone - security breach?

    Dear Apple community,
    Here is a Find My iPhone brain teaser. I have an iPhone and if I track it via Find My iPhone it appears in site A, a work place. That is where it should be. However, there are times when the device appears in a second site, site B, which is approximately 3 to 4 direct miles away from site A. When it is located in site B it is not a wide green circle suggesting its whereabouts. It quite accurately locates the phone inside a building which must be 25,000 square feet and set in its own grounds. The phone will appear there for a while and then after a new Find my iPhone search or a after some minutes the phone sometimes goes back to site A. I've observed this happening generally through the hours of 9am to 3pm and on several occasions. You might also like to know that site A and B are both in a city.
    Firstly, the phone has never been in site B, ever neither is the route taken to site A any where near site B.  Secondly I am tracing its position from another iPhone, iPad and a MacBook Pro that are located over 15 miles away. They all show the same mysterious location issue. The only common factor between site A and site B is that there is a person, a colleague, who works part time in both sites. My concern is that there is some sort of security breach. Can anyone advise?
    Looking forward to your replies.
    Mike

    Hi Mike,
    Thank you for using Apple Support Communities. 
    I have seen the same anomolies on occasion. From the following article:
    Note: Maps and location information depend on data collection services provided by third parties. These services are subject to change and may not be available in all geographic areas, resulting in inaccurate or incomplete maps or location information.
    iCloud: Locate your device
    Regards,
    Jeff D. 

  • Why am I getting emails twice?

    Why am I getting emails twice. Not all the time ... but sometimes. An email comes in ... five minutes later the same email comes in  again. And theyre not spams ... theyre legit emails.
    Im puzzled by this.

    Hi Kara38,
    Thanks for using Apple Support Communities.  This article contains information on the conditions that have to exist for an iPad to trigger that email:
    iCloud: Locate your device
    http://support.apple.com/kb/PH2698
    Find the approximate location of your iOS devices and Mac computers. You can locate your device if:
    Find My iPhone is set up on the device.
    The iOS device is online, or the Mac is online (awake and in range of a Wi-Fi network).
    Note:   If Find My iPhone can’t locate a device, the last known location is displayed for up to 24 hours. Select “Notify me when found” to get an email when it comes online.
    Note:   Maps and location information depend on data collection services provided by third parties. These services are subject to change and may not be available in all geographic areas, resulting in inaccurate or incomplete maps or location information.
    In the above quotes, the term "online" leads to this article:
    iCloud: online
    http://support.apple.com/kb/PH2593
    That article goes on to further define being online as:
    An iOS device is online if it’s turned on (with or without a passcode lock) and connected to a data network, such as EDGE, 3G, or Wi-Fi. A Mac computer is online if it’s turned on and connected to the Internet via Wi-Fi or Ethernet.
    If a device is online, a green dot appears beside the device in the My Devices list.
    I hope this helps,
    - Ari

  • Technical mapping incomplete for Purchase Order when we change address.

    Hello Experts,
      When we change the delivery address manually in the Purchase Order item we are getting the message 'Customs Business Partner Required'.  In the GTS system the PO status as Technical Mapping Incomplete. 
      Our system is configured to take the delivery address from the plant automatically.
      If we don't change the address manually in the PO we are not having any issue. 
      Please help me with this, this is very ungent.  Thanks in advance.
    with best regards
    K. Mohan Reddy

    Hi Mohan,
    Please counter check your configuration/mapping  per the SAP Configuration guide.
    This message is very clear, and points to the communication problem between your feeder system and the GTS Server/client.
    Check the following:
    System Communication
    Connecting the Feeder System to SAP Global Trade Services
    Defining a Logical System
    Assigning the Logical System
    Defining RFC Destinations for RFC Calls
    Defining RFC Destinations for Method Calls in Feeder Systems
    Defining the ALE Distribution Model
    Connecting SAP Global Trade Services to the Feeder System
    Defining the Logical Systems of the Feeder Systems in SAP GTS
    Assigning the Logical System
    Defining Groups of Logical Systems
    Assigning Logical Systems to Logical System Groups
    Defining the Target System for Remote Function Calls
    Defining RFC Destinations for Method Calls in SAP GTS
    Thanks,

  • 3D Mapping Incomplete

    I found a solution to my objects being rendered incomplete by adjusting the perspective angle by a degree or two but this didn't help my problem of the graphic map being incomplete.
    Please see attached image
    Basically I'm making labels for different sized bottles (i.e. wine, beer and sake)
    the wine worked so far but for some reason this sake bottle's label wouldn't complete rendering.
    I dunno if it is because the side of the bottle is slightly angled or what but I cannot get it to complete the image map.
    System: Mac Pro, OS X 7.4, Illustrator CS6
    Thanks
    PS: I'd like to find a solution within Illustrator and not going to another program, the point of my exercise is to create a scene entirely using Illustrator.
    EDIT: Upon further review, the wine label is a little funky too

    Let me gather the files
    But is there a limit to how much detail can go into a mapped surface of a 3D object?
    When I move the label around the complex illustration stays blocked out but the background renders.

  • [ERR]crypto map WARNING: This crypto map is incomplete

    i have PIX 501 ver6.3(5) when i setup VPN i get this error message
    WARNING:This crypto map is incomplete to remedy the situation add a peer and a valid access-list to this crypto map.
    although it seems fine in sh conf command
    but tunnel is not started
    when i review log i found
    sa_request,ISAKMP Phase 1 exchange started

    i could successfully establish VPN with another FW cisco 501 6.3
    but still can't fix my dilemma which i connect to Huawei Eudemon 500‎
    sh isakmp
    PIX Version 6.3(5)‎
    interface ethernet0 10full
    interface ethernet1 100full
    nameif ethernet0 outside security0‎
    nameif ethernet1 inside security100 ‎
    access-list inside_outbound_nat0_acl permit ip host internal IP host name remote internal IP1‎
    access-list inside_outbound_nat0_acl permit ip host internal IP host name remote internal IP2‎
    access-list outside_cryptomap_100 permit ip host internal IP host remote internal IP1‎
    access-list outside_cryptomap_100 permit ip host internal IP host remote internal IP2 ‎
    global (outside) 1 interface‎
    nat (inside) 0 access-list inside_outbound_nat0_acl
    sysopt connection permit-ipsec
    crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac ‎
    crypto ipsec security-association lifetime seconds 3600‎
    crypto map outside_map 100 ipsec-isakmp
    crypto map outside_map 100 match address outside_cryptomap_100‎
    crypto map outside_map 100 set peer remote peer
    crypto map outside_map 100 set transform-set ESP-3DES-SHA
    crypto map outside_map 100 set security-association lifetime seconds 3600 kilobytes 1843200‎
    crypto map outside_map interface outside
    isakmp enable outside
    ‎ ‎
    isakmp key ******** address remote peer netmask 255.255.255.255 no-xauth no-config-mode ‎
    isakmp policy 20 authentication pre-share
    isakmp policy 20 encryption 3des
    isakmp policy 20 hash sha‎
    isakmp policy 20 group 2‎
    isakmp policy 20 lifetime 86400‎
    sh crypto map
    Crypto Map: "outside_map" interfaces: { outside }‎
    Crypto Map "outside_map" 100 ipsec-isakmp
    Peer = remote peer
    access-list outside_cryptomap_100; 2 elements‎
    access-list outside_cryptomap_100 line 1 permit ip host 10.102.0.11 host remote internal IP1 ‎‎(hitcnt=14) ‎
    access-list outside_cryptomap_100 line 2 permit ip host 10.102.0.11 host remote internal IP2 ‎‎(hitcnt=6) ‎
    Current peer: remote peer
    Security association lifetime: 1843200 kilobytes/3600 seconds‎
    PFS (Y/N): N
    Transform sets={ ESP-3DES-SHA, }‎
    Crypto Map: "set" interfaces: { }‎

  • WARNING: This crypto map is incomplete

                    Hi ,
      i have ASA with 4 l2l vpn configured. as now am trying to configure new VPN tunnel; while configuring of crypto map set match add its giving me
    error like ... WARNING: This crypto map is incomplete
      as i have read all the discussion from forms its not effecting ; request you to please help
    Thanks
    Gajendra

    Hi,
    This is a normal message and just tells you that you have not yet entered all the "crypto map" commands related to this new connection to make the configuration complete
    You will essentially have to make sure that you have ATLEAST the following lines configured
    crypto map match address
    crypto map set peer
    crypto map set ikev1 transform-set
    The "transform-set" part might NOT need the "ikev1" depending on your ASAs software level.
    - Jouni

  • Crypto map entry is incomplete

    Hi
    This is my config below. The error i am recieving is crypto map entry is incomplete. Can someone please take a look and let me know.  Thank you
    ASA(config)# crypto map outside_map 1 match address outside_1_cryptomap
    WARNING: The crypto map entry is incomplete!
    ASA(config)# show run
    : Saved
    ASA Version 8.4(4)1
    interface Ethernet0/0
    switchport access vlan 2
    interface Ethernet0/1
    interface Ethernet0/2
    interface Ethernet0/3
    interface Ethernet0/4
    interface Ethernet0/5
    interface Ethernet0/6
    interface Ethernet0/7
    interface Vlan1
    nameif inside
    security-level 100
    ip address 10.10.10.2 255.255.255.0
    interface Vlan2
    nameif outside
    security-level 0
    ip address dhcp setroute
    ftp mode passive
    object network obj_any
    subnet 0.0.0.0 0.0.0.0
    object network net-local
    subnet 10.10.10.20 255.255.255.0
    object network net-remote
    subnet 10.10.3.0 255.255.255.0
    access-list outside_1_cryptomap extended permit ip 10.10.10.20 255.255.255.0 10.
    10.3.0 255.255.255.0
    pager lines 24
    logging asdm informational
    mtu inside 1500
    mtu outside 1500
    icmp unreachable rate-limit 1 burst-size 1
    no asdm history enable
    arp timeout 14400
    nat (any,any) source static net-local net-local destination static net-remote ne
    t-remote
    object network obj_any
    nat (inside,outside) dynamic interface
    timeout xlate 3:00:00
    timeout pat-xlate 0:00:30
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
    timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
    timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    timeout floating-conn 0:00:00
    dynamic-access-policy-record DfltAccessPolicy
    user-identity default-domain LOCAL
    http server enable
    http 192.168.1.0 255.255.255.0 inside
    no snmp-server location
    no snmp-server contact
    snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
    crypto map outside_map 1 match address outside_1_cryptomap
    crypto map outside_map 1 set pfs group1
    crypto map outside_map 1 set peer 96.145.68.82
    crypto map outside_map interface outside
    crypto ikev1 enable outside
    crypto ikev1 policy 10
    authentication pre-share
    encryption aes
    hash sha
    group 2
    lifetime 86400
    telnet timeout 5
    ssh timeout 5
    ssh key-exchange group dh-group1-sha1
    console timeout 0
    dhcpd auto_config outside
    dhcpd address 10.10.10.22-10.10.10.231 inside
    dhcpd enable inside
    threat-detection basic-threat
    threat-detection statistics access-list
    no threat-detection statistics tcp-intercept
    webvpn
    tunnel-group 81.141.29.69 type ipsec-l2l
    tunnel-group 81.141.29.69 ipsec-attributes
    ikev1 pre-shared-key *****
    class-map inspection_default
    match default-inspection-traffic
    policy-map type inspect dns preset_dns_map
    parameters
      message-length maximum client auto
      message-length maximum 512
    policy-map global_policy
    class inspection_default
      inspect dns preset_dns_map
      inspect ftp
      inspect h323 h225
      inspect h323 ras
      inspect rsh
      inspect rtsp
      inspect esmtp
      inspect sqlnet
      inspect skinny
      inspect sunrpc
      inspect xdmcp
      inspect sip
      inspect netbios
      inspect tftp
      inspect ip-options
    service-policy global_policy global
    prompt hostname context
    no call-home reporting anonymous
    Cryptochecksum:c2b7cdae5eb0961d822f634f2b36d3dc
    : end
    ASA(config)#

    Hi,
    You lack a "transform-set" configuration from the "crypto map" line.
    For example
    Create the IKEv1 Transform set
    crypto ipsec ikev1 transform-set AES esp-aes esp-sha-hmac
    and
    Use it in the VPN configuration
    crypto map outside_map 1 set ikev1 transform-set AES
    The values ofcourse depend on the your own preference
    Hope this helps
    - Jouni

  • Crypto map incomplete

    I have PIX 515 and trying to add a gateway to gateway VPN tunnel with dynamic IP. I already have two other VPN tunnels configured with static IP. I enter the access-list 110 than the crypto map mymap 20 ipsec-isakmp no problem. than the crypto map mymap 20 match address 101 I get error message Crypto map incomplete. Why am I getting this error and how do I get around it. Thanks.

    Yes I have an Incomplete.
    crypto ipsec transform-set tr-set esp-des esp-md5-hmac
    crypto dynamic-map dynmap 10 set transform-set tr-set
    crypto dynamic-map dynmap 15 set transform-set tr-set
    crypto dynamic-map dynmap 15 set security-association lifetime seconds 3600 kilo
    bytes 4608000
    crypto map mymap 10 ipsec-isakmp
    crypto map mymap 10 match address 101
    crypto map mymap 10 set peer 70.106.123.11
    crypto map mymap 10 set transform-set tr-set
    crypto map mymap 15 ipsec-isakmp
    crypto map mymap 15 match address 105
    crypto map mymap 15 set peer 67.100.146.217
    crypto map mymap 15 set transform-set tr-set
    crypto map mymap 20 ipsec-isakmp
    ! Incomplete
    crypto map mymap 6335 ipsec-isakmp dynamic dynmap
    crypto map mymap interface outside

  • Crypto map has incomplete entries message

    I'm working on building a configuration on a 5540 running 9.1.2 for L2L VPN.  When I reload the device, I get this message:
    .WARNING: crypto map has incomplete entries
    *** Output from config line 10665, "crypto map L2LVPN interf..."
    I seems it's giving me the error on the line where the crypto map is assigned to the outside interface.  Unfortunately this message really is not very helpful.  I do not have this in production yet. Is there any way I can find out where my problem may be?
    Thanks.
    Jason

    Hi,
    This usually indicates that one L2L VPN connection Crypto Map configuration is missing some essential parameter to make it complete.
    So issue the command
    show run crypto map
    Then make sure that the following lines exists
    crypto map match address
    crypto map set peer
    crypto map set ikev1 transform-set
    If any of the 3 things mentioned above are missing then the crypto map configuration is deemed incomplete and doesnt have the information needed for that L2L VPN to function.
    Atleast this is what it seems to me.
    Hope it helps
    - Jouni

Maybe you are looking for

  • HDV Workflow -- What's wrong with this picture (other than some obvious)

    Hi Powerusers, I have a client with a canon XH-A1, they are ingesting via iMovie HD, cutting a rough timeline in iMovie, and then porting to FCP (via drag and drop) for me to finish on. Seems plausible all editing via AIC (apple intermediate codec).

  • Controllers in the same WISM module in the 6500, i'm trying to make one of them anchor controller for guest internet

    I have 2 controller in the same WISM module and I'm trying to make one of them Anchor controller for guest WLAN, but when I give put the anchor controller in a separated non-routed VLAN and connect it to an outside switch by creating VLAN 192 on the

  • How DV-AVI is DV-AVI ?

    I have a lot of old (from 1988 onwards) analog Video 8 tapes. The old Panasonic stopped functioning for a long time now, but I found a company that will digitize the footage. Because I want to edit it all in Prel, the format is going to be DV-AVI. No

  • How do I watch multicam with audio?

    Made a nested sequence, turned it into multicam, but when I watch all angles simultaneously in the source monitor, there's no audio. How do I enable the audio tracks? I've tried turning them "on" on the timeline, selecting them, grouping them, nestin

  • DB package using in Forms

    Hello! We have migrate out application to other language. To avoid hard coded sting using in Forms we move all the strings (from trigger, PU...) to package functions. We estimate that it will be about 7000 functions in the package. Does it can be som