Incomplete order Pricing (17) block

Hi,
    Could you please share some information about the Incomplete Order Pricing (17) block. How to activate this block.
regards,
      Milan Thaker

Hello,
If I understand you correctly this message you get if you have a mandatory condition in your pricing procedure (tr v/08) yet a condition record has not been found.
Additionally you have to activate pricing in incompletion log (tr. ova2), but I am not sure if it's mandatory.
Best regards.
Piotr.

Similar Messages

  • How to prevent shipping if order pricing (EDI1) is incomplete

    Dear Gurus,
    would like to prevent shipping of sales orders that are incomplete due to EDI1 (customer expected price). Is it possible to configure the system so that delivery docs will only be created if the sales order pricing is complete?
    Wishes,
    Abhishek

    Make EDi1 mandatory, this will make the sales orer to get saved only if EDi1 is entered .
    Thanks and regards,
    Sudhir

  • Incomplete order list V.02 shows complete orders

    Hi All,
    There is a order which has a pricing error, but this order is complete(header ---> status). There is a issue with pricing being changed after a invoice being created.
    Could someone please advise on how to correct this as the conditions cannot be changed as the invoice is already being done.
    Also should'nt V.02, not show orders which are complete as for Header--> status completion.
    Thanks
    Keshini

    Hi
    By rejecting all the line items you are changing the status of the order to closed but the document is still incomplete. At any point of time you can change the status of the same document to open by removing the reason for rejection. Hence the document is considered as incomplete only.
    To meet you requirement, consult your ABAPer who can copy the standard program of the report V.02 and will make the required coding so that it will not consider those incomplete orders whose status is complete/closed(checking the VBUK table).
    Thanks,
    Ravi

  • How to set Incomplete order to set complete status

    Hi Gurus,
    Issue background: I have one order where delivery and billing has taken place accounting doc also generated.
                                  But order INcomplete log status is incomplete, (Plant and Pricing is showing as incomplete).
                                  Pl don't ask me how this is possible (because I can see in the system)
    What I have done: I have set the reson for rejection in the sales order header for all items. Still issue not resolved.
    Issue here is:        Order is still showing in the incomplete order report
    Business wouldn't want to:     revere this inv/del/order and redo.
    Is there any sap program I can run to set the incomplete order to set as complete?

    Hi,
    If you want to close or get the status the sales order as completed,
    1.Check the entry for the field ABGRU in the table VBAP for the sales order.
    2.If there is no value i.e the field is empty then try to assign the reason for rejection in the sales order item level and save the document.
    Regards,
    Gopal.

  • Report for released orders from credit block

    Dear Friends,
    Can you tell me any report which can give us the list of released sales orders from credit block with user ID (who released) and date (when released).  If no standard report is availble then please give me the table where this data gets stored, so that I can create a query.
    Thanks in Advance,
    Sreehari.

    Dear Krishnan,
    Thank you very much for your immediate response...................
    With VBUK-CMGST (D) we can get the list of orders which were released from credit block, but I require the ID and Date (who released and when relaesed).
    I hope my requirement is clear.
    Thanks & Regards,
    Sreehari.

  • Developed a report which gives PO(Purchase Order) Pricing details.

    hi experts,
    please give me tables and fields for following report, and also exlain me briefly,
    Developed a report which gives PO(Purchase Order) Pricing details.
    thanks in advance,
    radhakrishna

    Hello Radhakrishna,
    you can use the function module
          CALL FUNCTION 'RV_PRICE_PRINT_HEAD'
            EXPORTING
              comm_head_i       = wa_komk
         LANGUAGE          = ' '
       IMPORTING
         COMM_HEAD_E       =
         COMM_MWSKZ        =
            TABLES
              tkomv             = gi_komv
              tkomvd            = gi_komvd.
    in wa_komk pass the condition record number.
    this you will get from your vbak table
    reward  points if helpful

  • Order Confirmation - Generate IDoc even if the order is credit block - How?

    Hi EDI Experts,
    I have a simple requirement. I have no requirement set up in the output determination procedure for Order Confirmation. At this scenario, i am getting outbound 855 IDoc for all the orders except, the orders with Credit block on it.
    The client wants to send out the order even if it is credit blocked. Is there a way that i can do this?? Any suggestions ??? Your views are most welcome.
    Thanks and Waiting for youy replies,
    Creasy Matt

    Hi,
    I'm not sure, whether it is apt to ur requirement.
    We can remove the Credit block by configuring the 'Sales Order Types'.
    from the Tcode: VOV8, 
    Select ur order type (OR), click on the details icon
    there u can find the 'Delivery block' at the Shipping tab.
    thanks\
    Mahesh

  • Credit card Orders are getting blocked with credit check

    Hi All
    In our system, If customer's credit exposure is greater then 100 % then all the credit card orders are getting blocked with credit check even though it has valid authorization. Is this sap standard behaviour?....is there any setting that will always exclude credit card orders when it has valid authorization
    Thanks in advance for looking into this

    Hi,
    In OVA8- under document controlling- check the existing routinue 1 for orders etc., else modify as per your requirement
    Thanks
    Chidamabram

  • Standard T Code to release list of sales orders in 'Delivery Block'

    Dear All,
    Is there any standard transaction code in SAP which provides the facility to release list of sales orders in 'Delivery Block'. (Additional information - List of sales orders in 'Delivery block' is available in V.14,however it does not have release facility).
    For example, VKM3 gives the list of sales orders in 'Credit block' with release facility.On the same lines, is there any standard T code or any other facility in standard SAP which provides the facility to release list of sales orders in 'Delivery Block'.
    Thanks and Regards,
    Zahid

    As already suggested, if you execute VA14L you can see all sale orders that are blocked at
    -  header level
    -  item level
    -  credit check
    Wherever you see "X" under the tab Header level, double click on the respective sale order, so that system will take you to sale order in change mode.  You can remove the header level delivery block and save.
    thanks
    G. Lakshmipathi

  • Prevent Outbound delivery creation in sales orders with delivery block

    Hi gurus
         We are facing the following issue:
         Some sales orders have delivery block header and once they are saved an outbound delivery document is created; we want SAP system creates outbound deliveries only in those cases were sales orders have not a delivery block in header, is there any option or configuration we can use in order to prevent the creation of these documents?
    Regards,
    Edgar.

    Well Edgar,
    let's see then in spro
    Logistics Execution->Shipping->Deliveries->Define Reasons for Blocking in Shipping
    Check out the configuration of your delivery block reason and pay special attention to this instruction:
    "In sales documents, you can either enter delivery blocks manually at header level (business data in the sales document header) or they can be proposed automatically by the system. In the latter case, the delivery block must be entered in the respective sales document type (see chapter
    "Define sales document types"). In addition, the delivery block in the sales document header is only effective if the delivery block has been assigned to the respective delivery type."
    It must be something in the configuration of the delivery block reason you're using.
    Regards,
    Edgar

  • Sales Order Pricing User Exit Problem

    Hi,
    I am facing a problem related to coding in Sales Order pricing user exits. Scenario is as mentioned below:
    Based on Material Entered and Sold To in Sales Order, auto determination of a manual pricing condition happens. For doing this, coding has been done in USEREXIT_PRICING_PREPARE_TKOMP by changing XKOMV table. Auto determination of the manual price is happening properly.
    From Sales Overview Screen when user goes to the Conditions tab, Net Value is not getting calculated. When we navigate away to Schedule line tab and then come back to COnditions tab, Net Value is automatically getting calculated.
    AM i missing something in the coding part? As the data is getting populated automatically I guess some piece of code needs to be triggered. Can anyone shed some light into this.
    Thanks in advance,
    thunderans.

    Prabhu: After filling in XKOMV structure, I am calling FM PRICING. On doing this, the Sales Pricing is getting calculated but even then net value of order at header i.e VBAK-NETWR is not getting populated when we are in Sales Overview screen. When, I am getting into Conditions tab and coming back to Sales Overview screen, Net value is getting populated correctly. This portion of everything not getting populated at the same time is bothering me. The pricing conditon that I am  filling is a manual pricing condition.
    I put a breakpoint after FM PRICING which correctly populates XKOMV structure. How do I properly update Order Net Value in Sales Overview screen wihtout having to navigate to any other tab?
    Nicklas: I am looping at Order line within the user exit USEREXIT_PRICING_PREPARE_TKOMP and determining price. Once all line items are processed, I am using the FM PRICING for calculating Sales Prices.
    J@Y: Request to send me a bit more details into your approach.

  • Country of Delivering Plant is not showing in Sales Order Pricing Analysis

    Hello All,
    I have created a new condition table with the field Country of Delivering Plant (KOMK-WKCOU).
    But in the sales order pricing analysis this field is not fetching the country of the plant (it is showing the Yellow color exclamation icon).
    This is  a standard field, I am not able to understand why it is not fetching this field.
    I have used the same field for tax condtions in my previous projects as well, there it worked well. 
    Even I have activated the KOMK structure in SE11 also, but still the same problem.
    Can anybody tell me how to resolve this issue.
    Thanks & Regards,
    Sreehari.

    Rightly suggested by Shiva.
    As plant determines at item level.
    So, instead of KOMK-WKCOU, field should append in KOMP.
    FYI, for checking any inconsistency in condition table, you can use TCode VK+C.
    Regards
    JP

  • Control Sales order Pricing Date with Delivery GI Date

    Is it possible to have a control that ensures the Actual GI date in a delivery is not more than a number of days from the sales order pricing date?

    Hi,
    To have restriction in actual GI date in transaction VL01N . Please find the user exit for VL01N , you can use one which are marked as bold . Kindly take the help of abaper to put the validation or logic as required.
    V02V0001   - Sales area determination for stock transport order 
    V02V0002   - User exit for storage location determination 
    V02V0003   - User exit for gate + matl staging area determination 
    V02V0004   - User Exit for Staging Area Determination (Item) 
    V50PSTAT  - Delivery: Item Status Calculation 
    V50Q0001   - Delivery Monitor: User Exits for Filling Display Fields
    V50R0001    -  Collective processing for delivery creation 
    V50R0002    - Collective processing for delivery creation 
    V50R0004    - Calculation of Stock for POs for Shipping Due Date List
    V50S0001    - User Exits for Delivery Processing 
    V53C0001    - Rough workload calculation in time per item 
    V53C0002    - W&S: RWE enhancement - shipping material type/time slot
    V53W0001   - User exits for creating picking waves 
    VMDE0001  - Shipping Interface: Error Handling - Inbound IDoc 
    VMDE0002  - Shipping Interface: Message PICKSD (Picking, Outbound) 
    VMDE0003  - Shipping Interface: Message SDPICK (Picking, Inbound) 
    VMDE0004  - Shipping Interface: Message SDPACK (Packing, Inbound) 
    Hope this will help you to resolve your issue!!!!
    Regards,
    Krishna O

  • Excise CIN amounts not updated in TAX field in Sales Order Pricing

    Hi,
    I am not getting the Excise Amount [CIN] i.e BED + ECS + SHE Cess in Tax field of Sales Order Pricing Procedure. only Sales Tax amount is showing.
    Plz let me know, where did I go wrong in the Configuration.
    Thanx in advance.
    with best regards
    Jabbar

    Abdul,
    What you have said is correct with regards to condition record creation, excise rate picking and its calculation.
    On clicking the "analysis" button in pricing screen (Sales item details --> condition -->) try to analyse for each condition type
    we can resolve it
    Check within the condition type whether you have entered condition category = D, it must be like this
    Cond. class   =  D Taxes
    Calculat.type  = A Percentage
    Cond.category = D Tax
    In Pricing Procedure Activate "Statistical" Indicator, it will definitely appear in the tax field.
    Regards
    Sathya

  • Third Party Order pricing conditions copy to PO

    Hello,
    I have few pricing conditions in the 3rd party sales order. I want those conditions to be reflected in the 3rd party PO.
    Is there anyway to copy third party sales order pricing condition types to the PO?
    Cheers
    Anand.

    Dear Anand,
    Try with,
    T. Code: ME11 - Create Info Records
    Maintain the same condition in the info-record. The price shall be picked up in the PO by the inforecord.
    Best Regards,
    Amit

Maybe you are looking for