Incomplete podcasts; and getting back an episode I deleted

Hi,
I'm having trouble with incomplete podcast episodes. They sit in my library and on my ipod but are only partially downloaded. I can't find any way to persuade my machine to re-download them?
Also, I deleted an episode as an attempt to persuade a redownload and now that episode is gone from my iTunes and I cannot find a way to get the episode back ...
Don't really want to delete the whole podcast and resubscribe as I have a bunch of episodes downloaded and our bandwidth down here is pretty expensive...
Thanks,
Steve
Help, please.

Delete the episode in iTunes. (press the delete key).
Then click on the little arrow next to the podcast series WHILE HOLDING DOWN the option key. iTunes will reload the index and you'll now see the missing episode. Now you can click GET to download it again.

Similar Messages

Since recent updates, I have noticed that my apps close automatically when I am distracted. In some cases it is time consuming to sign back in and get back to the task I was doing. Is it possible to change a setting so the apps will stay open?

Since recent updates of iOS, I have noticed when using my iPad that my apps close automatically when I have to leave the room or am otherwise distracted for a few minutes. It is sometimes time consuming to sign back in and get back to the task where i left off. Is there a setting I can change so it will keep the apps open until I am ready to close them? Thanks for your help.

Did you have this problem before Restoring you iPad?
If you did then did you restore with a backup. You may have reinstalled something that is conflicting in this back up
If not then sounds like either something went array with the clean install or a hardware issue.
I know it's long winded but have you tired a clean install then downloading the apps again?
PJRS

How do I re-open and get back into my iPhoto if this message appears: "Your photo library is either in use by another application or has become unreadable"? What do I do?

How do I re-open and get back into my iPhoto if this message appears: "Your photo library is either in use by another application or has become unreadable"? What do I do?

Rebuild your iPhoto Library:
iPhoto 6 and later: Rebuilding the iPhoto library

I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine

I recently Updated my phone and my front camera stopped working its pitch black but still shows the icons on the screen but when i get off the app and get back on and flip the camera to my face view it works fine

Hi there Fgonzalez2015,
You may find the camera troubleshooting steps in the article below helpful.
Get help with the camera on your iPhone, iPad, or iPod touch
You see a closed lens or black screen
If you see a closed lens or black screen when you open the Camera app, try these steps:
Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
Force the app to close, then open the Camera app again.
Restart your device, then open the Camera app again.
If your device has a front and rear camera, try both cameras by tapping the camera swap icon . If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
-Griff W.

How can I get rid of Itunes 11 - such a bad version !!- and get back to the previous version?

How come the new itunes 11 is so bad? I need to force quit every 10 mn as it buggs all the time for no reasons (for ex. when I search a song beginning by "a"): Moreover, the search engine is not reliable at all, the Genius application is dead, the tracks disappear, the duplicate function is acting silly etc
So please any tip to get rid of this technological accident and get back the previous version?
Thanks.

This article will walk you through it
http://www.emacconsulting.com/apple/itunes/downgrade-itunes-11-to-itunes-10-7/

I just updated my latest java but the update is causing problems with some externale devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device

i just updated my latest java but the update is causing problems with some external devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device.
Is this possible and how do i do that?
Anyone who responds thanks for that!
Juko
I am running
Hardware Overview:
Model Name:          Mac Pro
Model Identifier:          MacPro1,1
Processor Name:          Dual-Core Intel Xeon
Processor Speed:          2,66 GHz
Number of Processors:          2
Total Number of Cores:          4
L2 Cache (per Processor):          4 MB
Memory:          6 GB
Bus Speed:          1,33 GHz
Boot ROM Version:          MP11.005D.B00
SMC Version (system):          1.7f10
Serial Number (system):          CK7XXXXXXGP
Hardware UUID:          00000000-0000-1000-8000-0017F20F82F0
System Software Overview:
System Version:          Mac OS X 10.7.5 (11G63)
Kernel Version:          Darwin 11.4.2
Boot Volume:          Macintosh HD(2)
Boot Mode:          Normal
Computer Name:          Mac Pro van Juko de Vries
User Name:          Juko de Vries (jukodevries)
Secure Virtual Memory:          Enabled
64-bit Kernel and Extensions:          No
Time since boot:          11 days 20:39
Message was edited by Host

Java 6 you can't as Apple maintains it, and Java 7 you could if you uninstall it and Oracle provides the earlier version which they likely won't his last update fixed 37 remote exploits.
Java broken some software here and there, all you'll have to do is wait for a update from the other parties.

Firefox 5 has lost all my chrome tab's and capabilities which came with 4? how do I un install 5 and get back to my version 4?

firefox 5 has lost all my chrome tab's and capabilities which came with FF4? how do I un install 5 and get back to my version 4 & retain all my bookmarks at least I's also like to retrieve my Chrome capabilities as well?

Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com

Is it possible to edit a DNG file in Photoshop and get back to Lightroom?

Hi,
The question title probably doesn't explain much what I'm looking for...
I shot in RAW and then converted to DNG, I like DNG and I can't understand what so many people have against it, anyway that's not the point...
I know have the DNG as my digital negative instead of the original RAW file and I start to do some editing in Lightroom. But then I realized that Lightroom is not enough for something I want to do. For instance, just today I had this picture I needed to remove some people and I had to use heal/clone but as you know, Lightroom's clone and heal features are not as flexible as Photoshop ones.
So now I needed to go into Photoshop, fix the photo and get back to Lightroom and continue my editing. However, I couldn't find a way to do it how I wanted to do... What I did was open the original (unedited) DNG in Photoshop, Adobe Camera Raw pops up and I ignore it, remove the people from the photo and save as TIFF. Then, back in Lightroom I open the new edited TIFF and copy Lightroom's settings from one photo (the DNG) to the other (the edited TIFF).
This workflow sucks and I know there are some options in Lightroom to automate it, but still, I don't think it would solve my problem. At least I couldn't find a way to do it...
What I wanted to do instead was to indeed remove that people from the photo with Photoshop but keep those changes in DNG. But take a note here that those changes could very much be destructive, I'm not talking about ACR or Lightroom's non-destructive editing, the removed people would be gone forever unless I draw some new ones. I really wanted to edit and save some changes on the DNG in Photoshop and keep editing the DNG in Lightroom without using a TIFF in between, do everything in the DNG.
Is this possible or not at all?

Ricardo.Amaral wrote:
What I wanted to do instead was to indeed remove that people from the photo with Photoshop but keep those changes in DNG.
sorry, no can do...ain't gonna happen.
What you've done is hit the wall on is the basic difference between lite duty spot healing and photo level tone and color correction (Lightroom and Camera Raw) and heavy duty pixel retouching in Photoshop.
When you need to substantially manipulate the "pixels" you need Photoshop and you'll be forced to render the raw file into a TIFF or PSD file either through Camera Raw or more better, via Lightroom.
You can do the basic tone and color correction directly in Lightroom and edit in Photoshop from Lightroom. But you will NEED to create and save out a "rendered" image that is no longer raw...then retouch to your heart's desire, save it and it'll be available in Lightroom along side your original raw if you choose.
But no, there's no way to open a raw in Photoshop, manipulate the heck out of it with massive retouching then save that back out as a raw file...ain't gonna happen.

How to GET RID of RAID and get back to IDE??

Hi,
I have a great Z800 Workstation with a 1.5TB HDD running Win7Pro-64. I've been using an 128GB SSD cache (Synapse/Dataplex) for about a year with no trouble, but stupidly thought that Intel's RST (Rapid Storage Technology) would do a better job, for writing in particular. So I installed RST... and run into touble.
RST put the two disks into a RAID... but since the disks are not the same geometry, and I appear to have an old chipset, it never actually worked: RST was unable to create a cache (i.e. to accelerate the HDD with the SSD) and the SSD became useless, as its Dataplex conroller clashed with the RAID.
In short, I would like to GET RID of the RAID (in view to replace the HDD by an SSD altogether)... but that appears to be impossible: I uninstalled RST and followed the "removdrv.txt" advice to switch (back) from RAID to IDE in the machine Setup... but Windows BSODs unless I keep RAID. Yes, I tried any and every "Repair" options Win7 could offer.
So my question is: how can I get rid of the (fake/useless) RAID and get back to IDE?
Many thanks for your advice!

I have some bad news for you.
If there is an actual RAID configuration present, then there is no turning back.
Breaking a RAID set destroys data on the set and makes it unbootable. That is why you are seeing the BSOD. If you kep playing with it, eventually it won't even boot up in RAID.
That means starting again from scratch with a new OS install.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Don't like 4, want to uninstall and get back to 3.6, this doesn't suit me, but how?

I find the system clumsy and awkward and I don't have the time to mess with this. Get into mail and have difficulty getting back to home page, have to exit and re-open. Seems very slow and inconsistant. I just want to get out and get back to 3.6. (Old proverb: If it aint broke, don't mend it!) a quality product, In my opinion, now mucked up.

To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles

HT1391 if I been robbed from my two diveces what can I do? to protect my informacion and get back my music??

if I been robbed from my two diveces what can I do? to protect my informacion and get back my music??

This won't get your old messages back but will help with new ones: https://selfsolve.apple.com/deregister-imessage

When I'm bouncing a project, it freezes or doesnt stop bouncing and keeps going past its cut off. how do i make it stop and get back to normal?

When I'm bouncing a project, it freezes or doesnt stop bouncing and keeps going past its cut off. how do i make it stop and get back to normal?

Hi
chorleyman wrote:
you do have to actually define the area to be bounced in the dialogue window that comes up - there are some discrepencies in the way that the program behaves like that,
Apart from the "Include Audio Tail" function, which can leave Logic bouncing for a very, very long time, there are generally, no discrepancies regarding the Bounce Locators:
If Cycle is enabled, the bounce locators will be set to the cycle locators.
If Cycle is off, and regions are selected, the bounce locators will be set to the selection.
If cycle is off, and no regions are selected, the bounce locators will be set from the Project Start to the project end.
It is smart to actually check that the bounce locators are set where you would like them to be.
wildfire31 wrote:
When I'm bouncing a project, it freezes or doesnt stop bouncing and keeps going past its cut off. how do i make it stop
If you get caught with a bounce that does not stop, Command . (period) should do the trick.
CCT

How to call plsql procedure or function and getting back the string?

Hi Everyone,
i am using Jdev 11.1.1.5.0.
i have a requirement to call plsql procedure or function from my backing bean java file and get back the returned value from the procedure or function.
what piece of simple code i need to write in my backing bean?
please suggest.
Thanks.

As always you write the method to call he pl/sql in the application module, expose this method to the client (so you see it in the datacontroll) then create a operation binding to the method and call this operation from the bean. The result you get by operation.getResult();
You should never call pl/sql from the bean directly!
The doc shows how to call the procedure from an application module: http://docs.oracle.com/cd/E21764_01/web.1111/b31974/bcadvgen.htm#sm0297
Timo

Call a webservice and get back a value within an ESB...

Hi!
I'd like to call a webservice and get back a value from it within an ESB. But I don't know how.
I think, I must create a routing service, then a SOAP service, but how can I get back the value from the webservice, which I called in the SOAP service?
Or it is not possible to realize this within an ESB?
Thank You very much!
Viktor

When you take a look at the Soa Orderbooking example you can see how it works. You create a webservice that accepts certain parameters and these are bundled into an object. This object, in case of the Soa Orderbooking example a 'PurchaseOrder', is described using an Xml Schema. The XML Schema is used to create the ESB with. Using this xsd the ESB knows which object it can expect and this object can be used inside your ESB or inside a bpel process.

How do I get off the settings screen and get back to the iPad desktop?

I am a first time user. How do I get off the settings screen and get back to the desktop?
Thanks

Press the home button.
It's the button on the face of the device.

Incomplete podcasts; and getting back an episode I deleted

Similar Messages

Maybe you are looking for