Incomplete Procedure while creating Sales Order
I want to configure incomplete procedure for Material or Customer, if they are not extended for Sales Area of that Sale Order type.
In short I want Sales Order number to be saved eventhough Material or Customer is not extened for Sales Area mention in VA01.
Pl let us know, how to configure such scenario, is it possible using incomplete procedure?
Regards,
Sanjay
Hi,
Follow the SPRO menu ptah given below:
SPRO->Logistics->Sales & Distribution->Basic Functions->Log of Incompletion.
Here you can assign incompletion procedure for Sales order header, line items, Schedule line etc.
tcode: OVA2
regards,
Siddharth.
Similar Messages
-
Function module to add record into incompletion log of creating sale order
Hi SD Experts,
Do you know any function module / class to add record a into incompletion log procedure of creating / changing sale order process? We can do it through configuration OVA2 but I need to add more condition before adding to this table.
Thanks,
DuyHi,
Refer to The SDN Post : [user exit to update the incompletion log in sales order for pricing error |Re: user exit to update the incompletion log in sales order for pricing error].
Limitation : While creating Sales order, this works only for document type with external number range as the code required for updating XVBUV require Sales Order Number.
Regards
Vinod -
Error while creating sales order with ref to contract
while creating sales order, with refernce to contract system is giving a message
Configuration not possible for material : Reason 3 --> Help
Message no. V1360
and the message is as follwed can any one explain
Diagnosis
This may have been caused by one of the following:
1. The configuration profile for the material allows or requires the bill of materials to be exploded during order processing. However, a plant has not been specified in the item.
2. The configuration profile of the material allows or requires the bill of materials to be exploded during order processing, but the order quantity in the item must be greater than 0.
3. A configuration profile has not been maintained
or
A configuration is not permitted for the material
or
4. The configuration profile of the material allows or requires the bill ofmaterials to be exploded during order processing. However, the system could not determine a date because important data is missing from the item (see incompletion log).Hi
I think you have both Variant configuration and BOM.
Pls ensure the following.
1. BOM masterdata is maintained for the variants
2. Variant configuration is configured correctly
Configuration profile is created for the material
Knowledge base object and run time version are available
3. Maintain materials as not relevant for delivery or dont give delivery quantity as 0
Once you are sure that these are in proper shape, you can start creating order. The problem wont come.
Reward points if it helps you. -
Error while create sales order
Hi,
Please help.
I am facing error while create sales order.
No item category available (Table T184 OR VERP )
Message no. V1320
Diagnosis
No item category could be determined for the combination OR VERP .
System Response
The system does not allow further processing of this item.
Procedure
Check the entries in table T184 by means of which item category determination is controlled.
If you do not have the authorization to do this yourself, contact your system administrator.Hi,
Check in spro whether Item categorygroup VERP is assigned to sales document type.if not assign.
Path
SPRO-SD-sales-sales douments-sales document item-assign item categories. -
How to manual maintain TAX condition value while creating sales order
Hi
I am creating one Tax condition suppose JLST without access sequence .
while creating sales order I am manually maintain the % value of TAX. suppose it is 1%
then I see It show some value in TAX .
save that sales order & creating delivery document for that but when I create Invoice its show error.
" Tax code in procedure CMTAXP is invalid ".
I know the configuration only for Tax condition with vk11 condition record .
BUT now I want to maintain TAX condition at the time of creating sales order.
so I remove the access sequence of that condition .
but It shows tax code error while billing.
My main question is that If i maintain condition record while creating sales order then how i can assign Tax code .
Can it is possible ?
if yes then How?
please help me.
thank youHi,
The "straight-forward" answer for Tax Code creation is contact the FI consultant. He shall help you, by creating Tax codes.
I have tested, with creating a tax cond type (copy of MWST) & manually entering values. I can create Sorder, Dlv and Bill but I cannot create an Accounting document. That is because of every line (amount) a Tax code is necessary.
I THINK, you can NOT have manually filled tax codes; access sequence is needed to get the tax value (%) and the Tax code from the condition record.
There is lot of material on the web to understand Tax classification, code etc. etc. See a useful link below -
http://www.sapgeek.net/2010/04/sd-determines-tax-code/
In short Tax code is a must and take the help of your FI consultant for the configuration of the same.
BTW - Tax code is already made created for MWST, therefore I suggested that you can use MWST. Furthermore, you can change the values corresponding to Tax codes in FTXP.
But if you are a beginner in these things, better take help. -
Condition tab in display mode while creating sales order.
Hi Guys,
When I go to create a sales order the condition tab shows all the condition types in grey, irrrespective of its being manual or mandatory. I know it has nothing to do with V/06 or standard pricing transactions. So I changes the item categry.Again used the same order type, same customer , same material and same sales area. Once I change the item category to Zxxx, Condition tab becomes changeable. So I concluded that item category is the culprit. But the question is Which part of item category is influencing it ?
Please help.
Regards,Hi Phani,
While creating sales order (VAO1), I go to item level and click on condition tab. I see all the things in this tab grayed. Nothing is changeable. I changed the item category, while the pricing procedure was same as the old one. Condition tab became changeable. So it has something to do with item category. But what is that one thing missing in my item category which is making condition tab grayed out..?
Regards, -
How to restrict the order reason in Tcode Va01 while creating sales order
Hi Gurus,
My requirement is
while creating sales order in VA01
if order type is Zvol
than the list of order reasons has to be restricted.
Now 15 are coming from OVAU tcode
I need only 5 from these.
Thanks & Reagrds
kals.Hi,
By doing the user exit in IW32 we achieved the requirement of restriction of maintenance order TECO functionality if any Service Entry sheet pending with reference of maintneance order.
regards
JKM -
Hello,
I am getting this Error message"error determining posting period(infostructure S008,Variant Z2,RC3)" while creating Sales order from Inbound Idocs in the IDOC,which is affecting sales order creation.
While viewing this Info structure S008, I could see no records have been maintained. Wanted to know the reasons behind this Hard error?
Is it something related to Date Field used in the Update Rules for this Infostructure which is causing this posting period error?
Appreciate your inputs on this.
Thanks and Regards
Mohammed RoshanThank you Jelena,I checked the Ship. Delivery dates in the IDOC which are for Current Fiscal Year- 20140703 and 20140711,Could there be any other reason for this error?
Could it be an issue with e Update rule in this Infostructire S008
Secondly when we try change the update rule thru MC25 for this Infostructure S008,It gives a message"
"Maintenance of SAP standard updates not allowed"
Kindly advice
Thanks and Regards
Mohammed Roshan -
Error while creating sales order
while creating sales order for a particular plant there is error coming
NO NUMBER RANGE FOR DOC TYPE ZOS1VXBAK-AUARTSILD
PLANTXVBAK-VKBUR.
Intailly I have check the no series we have internal no series for all plant,the
number series which start 195000001, only one plant the giving the above error, rest all plant it is as applicable above series.
kindly guide me for the same.Hi Sanjay
This is regarding number ranges defining and assigning tips which you can follow as below:
Whenever there is a new Sales Org being created, you will be required to maintain Number Ranges for Sales Documents which are allowed for your New Sales Area.
Number Ranges can be maintained Internally by the system, however it can be maintained externally also if you customize it accordingly.
In Standard SAP the Transaction code for Maintaiing Number ranges externally is VN01.
Defining - The same can be reached through in IMG as : Sales & Distribution>Sales>Sales Document Header-->Define Number Ranges for Sales Documents.
Here you provide the system a specific Number range as follows:
Number range Key Start Number range End Number Range+Current Number
For Example: If you want to propose the following Number Range
*1 9000076000 9000076999 0
The Current Number field will be kept zero as you are proposing new number range and no sales documents have been created on it , Obviously..
*1 is a Unique Two digit Alphanumeric Key, while proposing your key, you should ensure that it should not be there in the system as existing.
If you propose a key that is there in the system or if the Number Range (Start and End Series) is there in the system already, the system will throw a message that Interval already already exists. So choose a key that is unique, and which is not there in the system.
Here , by making this , you are assigning a Key to a Number Range Series.
All the symbols can be used along with numbers from 0 to 9 and Alphabets from A to Z and in any order. For example: !1, ^A, BB,Z*,M2.........
Assigning - In Assigning, you assign the particular Sales Document to the Number Range you have already proposed as above.
The Assigning Part is done as follows:
The Two digit Alpha Numeric Key is maintained or Assigned to the respective Sales Document type in V0V8.
This can also be reached in IMG by:
Sales & Distribution>Sales>Sales Document Header-->Define Sales Document Types
Locate the particular Sales Doc Type, and double click on it to display it configuration. Here you put the Two Digit Number key in the Field- "Number range External Assignment"
Besides this:
If a new Shipping Point is created then Delivery Number ranges are required to be maintained.
Similarly,
If a new Plant is created then Billing Number Ranges are required to be maintained.
Regards
Naren -
End of Valid Logistic Calender error while creating Sales Order
Hi,
While creating Sales order in VA01 the following error message comes for particular material code for a particular site only:
24.01.2202 date comes after end of valid logistics calendar. (Please
correct)
Message no. 61062
Can anyone suggest on the same.
Regards
NiloferHi,
The input value given in Sales order is " Req Delivery date: 31.03.2012", but the error comes with the below date such as
"24.01.2202 date comes after end of valid logistics calendar.(Please correct)"
We also face one more error such as
" Incorrect index structure for table XMVERF_POS/0000224110/000040 ".
From where system is taking 24.01.2202 date? -
Hi error while creating sales order
hi
i am getting 'not able to save' message while i am creating sales order.
how should i proceed to know where is the problem???
i tried debugging but it is taking lots of time, is there any other way i can know the reason for this error in standard code.
there is no wrong data entry while creating sales order.
i just want to know what are the ways to know where is the problem in the standard code.
thanx
rockyhi ,
try too create a sales order after that check transaction code ST22 U WILL FIND AN SHORT DUMP then check in the source code extract an pointer will be visible where the error is coming and it will also show the program name , please read the dump analysis care fully
srinivas -
Run time error while creating sales order in VA01
Dear all,
In our develpment server(ecc 6.0),while creating sales order in VA01 for a sales area, when ever entering material number and quantity and press enter, it is giving error and taking to Runtime error long text showing syntax error in program RK2LSFOC
application patch level for both production and development is same.
can any one suggest the solution please
Moderator message - Cross post locked
Edited by: Rob Burbank on Jan 7, 2010 10:03 AMths
-
Hello all,
my requirement is, system should give error message while creating sales order, if chapter ID is not maintained for a material and plant combination.
please suggest the user exit.Hi
CASE 1 : All Plants are excisable.
In Material master , Foreign Trade data tab- mentioned Control code field mandatory. ( i.e nothing but Chapter ID)
CASE 2 : Few Plants are excisable
In the Case 2 you need to go for Enhancement
Program Name : MV45AFZB
User Exit: USEREXIT_CHECK_VBAP ( Item Level Check )
By using above user exit you write a logic with the help of ABAPer
Plant and Chapter ID combination table : J_1IMTCHID -
Automatic creation of settlement rule while creating sales order
Hi Friends,
Can any one help me how to create settlement rule automatically while creating sales order i.e saving sales order. Is there any function module or any badi which can be used.. please suggest.
thanks
bobbyHi,
Here is the solution , First Create a sustitution by going into OPSN Transaction , only user exit say 'U902'
and write the form routine in Program named 'ZRGGBS000'
The code is below ,
*& Form U902
Automatic Generation of Settlement Rule For WBS and Company 4180
FORM u902.
Exit For Automatic Settlement Rule Creation for WBS Billing elements
IF sy-tcode = 'CJ20N' or sy-tcode = 'CJ01' or sy-tcode = 'CJ02'.
DATA lv_proj TYPE ps_pspid.
lv_proj = proj-pspid.
EXPORT lv_proj TO MEMORY ID 'PSPID'.
Calling YGPS_CJB1EXEC Program For Creating Settlement Rule
SUBMIT ygps_cjb1exec AND RETURN.
ENDIF.
ENDFORM. "u902
*& Program YGPS_CJB1EXEC
PROGRAM ygps_cjb1exec.
Automatic Generation of Settlement Rule For WBS and Company 4180
Called From Exit For Automatic Settlement Rule Creation for WBS Billing elements
DATA: bdcdata_wa TYPE bdcdata,
bdcdata_tab TYPE TABLE OF bdcdata,
itab TYPE TABLE OF bdcmsgcoll.
DATA :lv_currm LIKE bkpf-monat,
lv_curry LIKE bkpf-gjahr,
lv_prevm LIKE bkpf-monat,
lv_prevy LIKE bkpf-gjahr,
lv_proj TYPE ps_pspid,
lv_mode TYPE c,
lv_time TYPE sy-uzeit.
DATA :g_datfm LIKE usr01-datfm,
g_dd(2) TYPE c, " Day
g_mm(2) TYPE c, " Month
g_yyyy(4) TYPE c, " Year
g_sydatum(10) TYPE c.
IMPORT lv_proj FROM MEMORY ID 'PSPID'.
lv_mode = 'N'.
CLEAR bdcdata_wa.
bdcdata_wa-program = 'SAPLKAZB'.
bdcdata_wa-dynpro = '1000'.
bdcdata_wa-dynbegin = 'X'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_CURSOR'.
bdcdata_wa-fval = 'PRZB-VARIANT'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'PRZB-VARIANT'.
bdcdata_wa-fval = 'ZGPS0001'.
APPEND bdcdata_wa TO bdcdata_tab.
CALL FUNCTION 'GET_CURRENT_YEAR'
EXPORTING
bukrs = '4180'
IMPORTING
currm = lv_currm
curry = lv_curry
prevm = lv_prevm
prevy = lv_prevy.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'RKAUF-FROM'.
bdcdata_wa-fval = lv_currm.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'RKAUF-GJAHR'.
bdcdata_wa-fval = lv_curry.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_OKCODE'.
bdcdata_wa-fval = '=VARC'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-program = 'RKPSEL00'.
bdcdata_wa-dynpro = '1000'.
bdcdata_wa-dynbegin = 'X'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_CURSOR'.
bdcdata_wa-fval = 'CN_PROJN-LOW'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'CN_PROJN-LOW'.
bdcdata_wa-fval = lv_proj.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'CN_PSPNR-LOW'.
bdcdata_wa-fval = space.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'CN_NETNR-LOW'.
bdcdata_wa-fval = space.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'CN_ACTVT-LOW'.
bdcdata_wa-fval = space.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'CN_MATNR-LOW'.
bdcdata_wa-fval = space.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_OKCODE'.
bdcdata_wa-fval = '/00'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_OKCODE'.
bdcdata_wa-fval = '=SAVE'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_OKCODE'.
bdcdata_wa-fval = '=VBAC'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-program = 'SAPLSPO1'.
bdcdata_wa-dynpro = '0100'.
bdcdata_wa-dynbegin = 'X'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_OKCODE'.
bdcdata_wa-fval = '=YES'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-program = 'SAPLKAZB'.
bdcdata_wa-dynpro = '1000'.
bdcdata_wa-dynbegin = 'X'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'RKAUF-BATCH'.
bdcdata_wa-fval = 'X'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'RKAUF-TEST'.
bdcdata_wa-fval = space.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_OKCODE'.
bdcdata_wa-fval = '=RUN'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-program = 'SAPLKABA'.
bdcdata_wa-dynpro = '0210'.
bdcdata_wa-dynbegin = 'X'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'KABA01-JNAME'.
bdcdata_wa-fval = 'CJB1_EXEC'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_SUBSCR'.
bdcdata_wa-fval = 'SAPLKABA'.
APPEND bdcdata_wa TO bdcdata_tab.
Extract the date format from the user settings
PERFORM f_get_dateformat CHANGING g_datfm.
Changing the current date format to User Profile Date Settings
PERFORM f_format_date USING g_datfm
sy-datum+4(2)
sy-datum+6(2)
sy-datum+0(4)
CHANGING g_sydatum.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'KABA01-STDAY'.
bdcdata_wa-fval = g_sydatum.
APPEND bdcdata_wa TO bdcdata_tab.
lv_time = sy-uzeit + 30.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'KABA01-STTME'.
bdcdata_wa-fval = lv_time.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'KABA01-PRIKZ'.
bdcdata_wa-fval = space.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_OKCODE'.
bdcdata_wa-fval = '=TAKE'.
APPEND bdcdata_wa TO bdcdata_tab.
Calling Transaction 'CJB1' for creating settlement rule
CALL TRANSACTION 'CJB1' USING bdcdata_tab MODE lv_mode .
IF sy-subrc = 0.
ENDIF.
*& Form F_GET_DATEFORMAT
This subroutine returns the date format in the user setttigs
<--P_G_DATFM Date Format
FORM f_get_dateformat CHANGING p_g_datfm. "#EC *
SELECT SINGLE datfm FROM usr01 INTO p_g_datfm
WHERE bname = sy-uname.
ENDFORM. " F_GET_DATEFORMAT
*& Form F_FORMAT_DATE
This subroutine returns the date as per the user settings
-->P_G_DATFM Date Format
-->P_G_MM Month
-->P_G_DD Day
-->P_G_YYYY Year
<--P_G_DATE Date
FORM f_format_date USING p_g_datfm
p_g_mm
p_g_dd
p_g_yyyy
CHANGING p_g_date. "#EC *
CONSTANTS: c_dot VALUE '.',
c_slash VALUE '/',
c_dash VALUE '-',
c_1 VALUE '1',
c_2 VALUE '2',
c_3 VALUE '3',
c_4 VALUE '4',
c_5 VALUE '5',
c_6 VALUE '6'.
DATA: l_day(2),
l_month(2).
l_day = p_g_dd.
l_month = p_g_mm.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = l_month
IMPORTING
output = l_month.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = l_day
IMPORTING
output = l_day.
CASE p_g_datfm.
WHEN c_1.
CONCATENATE l_day l_month p_g_yyyy INTO p_g_date
SEPARATED BY c_dot.
WHEN c_2.
CONCATENATE l_month l_day p_g_yyyy INTO p_g_date
SEPARATED BY c_slash.
WHEN c_3.
CONCATENATE l_month l_day p_g_yyyy INTO p_g_date
SEPARATED BY c_dash.
WHEN c_4.
CONCATENATE p_g_yyyy l_month l_day INTO p_g_date
SEPARATED BY c_dot.
WHEN c_5.
CONCATENATE p_g_yyyy l_month l_day INTO p_g_date
SEPARATED BY c_slash.
WHEN c_6.
CONCATENATE p_g_yyyy l_month l_day INTO p_g_date
SEPARATED BY c_dash.
ENDCASE.
ENDFORM. " F_FORMAT_DATE
thanks
bobby -
How to change the status of material while creating sales order via BDC
Hai.
In BDC while creating sales order( va01 posting ) it is stucking up in middle saying material is new. I.e Sales order (va01) is not getting created because of material status is new . I want to create sales order (va01) even material status is new.
pls give me out the solution. Points will be rewarded.
thanks & regards,
sami.Hi,
If you drag the line item a little towards the right side, you will find a filed material entered. The one you see in the material filed on sales order over view screen is the one determined. You can as well double click and see the fields material entered and material determined.
Is there anything else you are expecting to see as part of analysis ?
Regards
Sadhu Kishore
Maybe you are looking for
-
Help required: Classes and class values for Func Loc
Dear All, I have a requirement to get the classes and values associated with a functional location. Any idea how to get this data, as in IL03. Thanks, nsp.
-
Opening qries (BEX7.0) through web browser
Dear Experts I have created a query using Query Designer (BEX 7.0) and now I want to open or execute it in WEB Browser . Pl. mention all the steps............ Thanks in advance Dinesh Sharma
-
Mitel phone 802.1x with Cat 3560 and Cisco ACS5.2 problem
I am piloting an 802.1x implementation for a client who has Mitel IP Phones. I have setup the switch and ACS based on previous experience and a windows PC can authenticate onto the network OK. When I use a Mitel phone however, it seems to skip past
-
HT4910 how to transfer contacts from i cloud to galaxy s3
how to transfer contacts from i cloud to galaxy s3
-
How do I kno d cost of my iPhone 5?and also the country to which it belongs to?!
How do I kno d cost of my iPhone 5?and also the country to which it belongs to?!