Incompletion log Field VBAP POSEX is not defind in incompltion procedure ZA

Hi Friends,
Need some help on this issue.
We have some orders created in production, and when ever we go to VA02-> enter-> it pops up with the below error  message." Field VBAP POSEX is not defined in incompletion procedure ZA ".
I already checked the incompletion procuredue and the field VBAP-POSEX (Purchase order item) was not at all defiend.
It gives the incompletion log for only certain line items in the sales order and not for all. There are already few items delivered and we cannot reject the order to create a new one.
I reveiwed this note "1497255 - Incompletion for PO item number (vbap-posex)" but it states it is for specifically for intercompnay orders.
Our case is standard trade order. It woud be really great anyone has come across the same situation so that i can seek for help..
Thank you so much!!
Best Regards,
Ram

Hi Lakshmipathi,
Firstly, thanks for the response.
Yes.. I did checked... the field VBAP-POSEX was not maintained at item level though.
The same item in other order does not have this problem and it is still open.
This is specific to only very few orders, namely 4 or 5 orders but not with others.
Moreover, these materils  are widely used among other company codes or sales org but no issues what so ever.
This one appears to be a peculiar case. Thanks for your time and suggestions for looking it over.
Thank you..
Best Regards,
Ram

Similar Messages

  • Va42 item billing plan, incompletion log,T185-requested func FEBA not avail

    Va42 item billing plan, incompletion log,T185- error "requested func FEBA not available here"
    We have created new entries in the T185 table to enable the imcompletion log to go to the billing plan tab in the sales contract.  However, when I click on the green back arrow, I get  the above error.
    Can someone give me an idea of the cause of the error and if there is a how-to manual on creating new screens, new flow control, and debugging methods for the incompletion log?
    I am creating incompletion log entries for the billing plan in the sales contract at the item level. We have modified the special rules table RV45A_UV to add the additional check fields.
    Can I add additional  check tables to the TVUVF table?
    Here are the entries I created in T185:
    SAPMV45B,PFPL,FL,,,*,P0,PFPL,ENT1,T,0
    SAPMV45B,PFPL,K0,,,*,P0,PFPL,ENT1,T,0
    SAPMV45B,PFPL,P0,,,*,P0,PFPL,ENT1,T,0
    SAPMV45B,PFPL,PX,,,*,P0,PFPL,ENT1,T,0
    SAPMV45B,PFPL,U0,,,*,P0,PFPL,ENT1,T,1
    Thanks
    Paul

    sorry. tis may not be correct forum.

  • Intrastat - Incompletion Log- The regional code has not be found for Cntry

    Hi,
    Though I have already maintain region code. Still I am getting an error message that The official regional code of region 001( country GB) has not be found.
    Can somebody help.

    hi,
    if ur in ecc6.0, go to SPRO-SAP NET WEAVER -GENERAL SETTING-SET COUNTRIES -INSERT REGION
    If ur in 4.7 u may not find netweaver part, u can get general settting direck
    cheers

  • VBAP-POSEX field defaulting item number

    When we first set up sale orders in SAP the field VBAP-POSEX (purchase order item) always remained blank.  We only use this field for a specific order type.  Now the system is always putting in a number, based on the line item and I can not figure out why it is doing this all of a sudden.  Does anyone know where the settings are or what I need to do to keep the system from always numbering this field?  It causes problems for other order types because of the number being there and even if you delete it the next time you make a change to the order it puts it back and always the number of the line item.  Very frustrating.  Any ideas?
    regards,
    Donna M.

    Hi,
    Check any user exit used to populate this automatically because this number is taking same as sales order item number,
    However for this field there is no any functional setting to auto populate it is freely defined field to put customer P.O item number.
    Kapil

  • No Incompletion Log for Sales Order with net value as zero

    Hi all,
    There is an Inbound IDOC which creates a Sales Order.
    When we check the IDOC, we find that it has got 4 line items (E1EDP01). However, for all the items except the third one (for example), the segment E1EDP05 is filled. In the segment E1EDP05 the field KRATE contains the corresponding net value for the respective line items.
    Then when we check Sales Order which is created, we find that the third line item (for example) has the net value as zero. In this case, ideally there should have been an entry in the Incompletion Log. However, it does not happen so.
    I suppose the issue is with the third line item in the IDOC for which the segment E1EDP05 is not present. I have debugged the corresponding FM is IDOC_INPUT_ORDERS, but was unable to find any clue.
    Please let me know the reason for this.
    Thanks and regards,
    Anishur

    In routine interpret_idoc_orders the item conditions are filled by calling
    WHEN 'E1EDP05'.
           MOVE IDOC_DATA-SDATA TO E1EDP05.
           PERFORM ZUORDNEN_ORDERS_E1EDP05.
    In case KRATE is empty no values are transferred to the order
        IF NOT E1EDP05-KRATE IS INITIAL.
          PERFORM IDOC_CUR_MOVE USING E1EDP05-KRATE XKOMV-CURRDEC
                                      XKOMV-KOEIN
                                      XKOMV-KBETR D_FLAG_P-PKON.
        ENDIF.
    If that is a valid scenario, you need to adjust your incompletion procedure in customizing to include the net value on item level so any missing value is reported.
    If this is not supposed to happen you might want to hook into one of the user exits in the idoc and in case KRATE is missing let the idoc fail.
    Hope that helps,
    Michael

  • Credit - Field VBAP-CMPRE

    Dear experts,
    I've this issue:
    When i Create a new order the field VBAP-CMPRE is not valued. Do you know the reason?
    I've checked all credit settings in customizing and these are correct.
    If I check others orders in the table VBAP the field is valued correctly.
    Thanks
    Regards
    Max

    Dear Max Pozzi,
    Did you check whether the pricing procedure coming in the old sales orders is same as the one coming in the new sales order?
    Usually VBAP-CMPRE gets filled with the value of the condition type to which a subtotal A is assigned in the pricing procedure.
    Check what is the pricing procedure coming in the new sales order and go to v/08 and check whether there is a subtotal A assigned against any condition type.
    Check and revert back.
    Thanks & Regards,
    Hegal K Charles

  • Field VBAP-MAGRV update??

    Hi gurus,
    we have an user exit in master material (MGA00001) that modifies sales order with bapi BAPI_SALESORDER_CHANGE, but field VBAP-MAGRV is not in parameters of this bapi. How Can we change this field in correct form?? Or only exist through UPDATE directly in table VBAP?
    Thank you!!!
    I will revvard all answers!!

    Hi Daniel
    U need to create an enanchement:
    U need to use the paramenter table EXTENSIONIN (like BAPIPAREX) in order to transfer other informations (not managed by std structure of BAPI).
    All item information will transfered from EXTENSIONIN to structure BAPE_VBAP, so u make sure your field is in this structure, if there isn't, u need to add it there by append structure.
    U need to manage the structure BAPE_VBAPX just like BAPE_VBAP: here u need to insert the flag field.
    At the end the information will be transfered from BAPE_VBAP to structure VBAPKOM, so yuo make sure your field is in this structure too, else insert it.
    U need to manage the structure VBAPKOMX too.
    How to fill EXTENSIONIN structure:
    TABLES:  BAPE_VBAP, BAPE_VBAPX.
    BAPE_VBAP-VBELN = BAPE_VBAPX-VBELN = <VBELN>.
    BAPE_VBAP-POSNR = BAPE_VBAPX-POSNR = <POSNR>.
    BAPE_VBAP-MAGRV = <.....>.
    BAPE_VBAPX-MAGRV = 'X'.
    EXTENSIONIN-STRUCTURE = 'BAPE_VBAP'.
    EXTENSIONIN+30                = BAPE_VBAP.
    APPEND EXTENSIONIN.
    EXTENSIONIN-STRUCTURE = 'BAPE_VBAPX'.
    EXTENSIONIN+30                = BAPE_VBAPX.
    APPEND EXTENSIONIN.
    Max

  • Partner function AP is not def in partner procedure in ECC - CRM complaint

    Hi,
    There is an error occured while creating credit memo request from the service complaint in the CRM. It is not stopping the process but it happens several times. The error message is always in the document but not able to fix it. There is no partner function called AP in both CRM and ECC but how come the system is looking for this new partner function in the partner determiination procedure in ECC. The detail error message as below
    An error has occurred in the system RP9CLNT020 while copying the document
    Message no. CRM_ORDER_MISC 020
    Diagnosis
    Errors have occurred while transferring the document into another system. Refer to the enclosed log to view the error messages.
    Transmission log
    Partner function AP is not defined in partner procedure ZUK () (Notification E VPD 003)
    ORDER_HEADER_IN has been processed successfully (Notification S V4 233)
    ITEM_IN has been processed successfully (Notification S V4 233)
    Sales document 0350002869 was not changed (Notification E V4 219)
    Any clue in fixing this issue will be great.
    Regards,
    Ram.

    Hi,
    There is no problem in creating credit memo in ECC even with these error message.  the credit memo document is created in ECC. Actually thiis is not happening for all the complaint documents in CRM. It happens only for few customers/complaints.
    My doubt is with contact person mismatch in crm and ecc, but that is also perfect. pls let me know solution for this issue.
    Regards,
    Ram.

  • Custom field in incompletion log

    Hi All,
    I have added a new custom field (custom field from VBAK) in VA31/VA32 Additional data A tab .
    My requirement is : This custom field should appear in the incompletion log ONLY based on some condition.
    So to add this custom field into incompletion log, configuration is done through
    SPRO->basic functions->Log of Incomplete items->Define incompleteness procedure .
    query:
    How to proceed further to handle the incompletion log conditionally .
    so that only for specific document type and only for specific sold-to-party this field should appear in incompletion log.
    Could you please help me if anyone have come across such scenario.
    Thank you.
    Regards,
    Sangita

    Sangita,
    You will not be able handle incompletion log conditionally ONLY just  by adding the required custom field in the Incompletion log procedure. Along with the right customization you also have to write the custom logic in the one of the MV45A* userexits populating a record with the sutom field in the runtime structure XVBUV.
    Hope this helps.
    Thanks
    Arjun

  • EDI1 Message on incomplete log is not V1 249

    This question is about the message withing the incompletion log.....
    When we see the VA01/VA02 incompletion log is says "Expected Price Missing" We were expecting V1 249 "Customer expected price differs from net price for item &." Debugging the formula shows that V1 249 is being populated to xkomv-fxmsg. Has anyone encountered this? Does anyone who uses EDI1 for reporting differences between net price and customer expected price normally get "Customer expected price differs from net price for item &." V1 249 on incomplete log. when in VA01/VA02?
    No problems encountered using V.25 and the release works fine, so no problems there.
    We are also able to correct the price difference manually within VA01/VA02, that works fine.
    The only question we have is why Message V1 249 does not display incomplete log. It has "Expected Price Missing instead.
    What does everyone else encounter on VA01/VA02 incomplete log at their sites when using this functionality?
    Ian

    It seems that you're misunderstanding the purpose of the incompletion log. Incompletion procedure and log is meant only to inform the user that some required data is missing. It doesn't provide any further analysis as to why it is missing or anything like that. Therefore the message will always look like '<...> is missing'; sometimes even just a field name will be mentioned.
    The code behind the incompletion procedure is a simple comparison blank/not blank. Naturally, some other functional code may precede it, but it's totally irrelevant to the incompletion log.

  • I paid for exportpdf and everytime i try to use tool on pdf, it asks me to subscribe. i have to log into website EVERY time. not acceptable.  how can i export only form fields that were filled in?

    i paid for exportpdf and every time i try to use tool on pdf, it asks me to subscribe. i have to log into website EVERY time. not acceptable. Some forms can't be saved so having to log in and only use webtool to upload a saved pdf won't work.
    as well, how can i export only form fields that were filled in if I can get pdf to save to computer?

    Hi kstine,
    I can see why that would be frustrating! Have you tried selecting Stayed Signed In underneath the Adobe ID and Password boxes when you try to log in?
    What did you use to create the PDF form? If you used FormsCentral, form data is saved to your online FormsCentral account. If you have Acrobat, you can export form data as described  here: Adobe Acrobat X Pro * Manage form data files
    Best,
    Sara

  • Sales BOM and Incompletion Log

    Hi SAP experts.
    We are on ECC 5.0. Wer are exploding sales BOM in sales orders. I have a requirement that if for certain reason a BOM fails to explode for a particular line item then that item should be go an incomletion log. I was able to select field VBAP-STKEY (BOM ORIGIN) in incompletion procedure at the item category level.
    However the problem i have with this is even if the BOM explodes the order is set to incomplete once I add VBAP-STKEY to the incompletion procedure. I find the VBAPSTKEY also gets a value of 5 in the table however the order is stil shown as incomplete. I am not sure if this is a bug.
    If it is not possible to control this via incompletion log is there a way to ensure that if a sales BOM does not explode in sales order the system should not create delivery for that line item.
    Any response will be highly appreciated.
    Thanks
    Praful

    Dear Praful
    You can try with this.
    Go to OVA2, block "Sales-Item" and double click on "Procedures".  Again block on "Standard Item" and double click on "Fields".  There maintain as follows:-
    Table::Fld name::::::::Description:::::::::Screen:::Status
    VBAP:::UEPOS:::::::Higher-level item:::POST::::::04
    thanks
    G. Lakshmipathi

  • MV45AFZB - FORM USEREXIT_CHECK_VBAP USING US_DIALOG - incompletion log

    Hello,
    I'm struggling with a problem concerning the incompletion log after deleting a value in the named user exit.
    I check if the profit center has a certain value in the form  USEREXIT_CHECK_VBAP USING US_DIALOG. if this is the case, the system deletes the value. But my problem is that at this moment, the incompletion log is not updated. Do I have to update the table xvbuv manually with the new entry ? Or is there another way to update this ?
    Thanks in advance !

    That's not entirely true - it depends on the user, what changes on the line item, and what the criteria are for blanking out the value.  Removing the value would be the normal trigger if the field is in the item incompletion procedure but not necessarily if done via code.
    The incompletion check occurs in routine VBAP_PRUEFEN_ENDE and requires that something has changed in VBAP in order to be triggered.  If the routine has already been called and then you change a VBKD-based value on the item, such as the incoterms, then the incompletion check is skipped but the userexit_check_vbap call is still made afterwards.  In this scenario, if you click 'Save' after making the incoterms change, the profit center value gets wiped out and no incompletion is triggered unless you append the value back to the table (or make a subsequent check with RV_CHECK_DOCUMENT_INPUT).  I'm assuming this is why the poster asked the question.  Might be a bug, but SAP would probably tell you it's 'working as designed'...

  • Additional tab in sales order-incompletion log

    Hi
    We have added additional tab in sales order at item level...
    But when we try to put the some fields which are available in the additional tab into incompletion log,we are not able to select the respective screen name...
    How to add that additional tab in the screen name of incompletion log..
    We could give field name,table name,but screen is not availble,,in incompletion log...
    When we did recording it gave us fcode as T14 (screen name)
    Can u tell us how to bring that screen in the incompletion log
    Regards
    Sudha

    Hi
    We have added customised fields in item level table  VBAP and include these in the screen  8460 (Additional data B).
    We need to bring these fields in incompletion log..Tell us what screen we should give in incompletion log config...

  • Incompletion Log V50UC  EXCTR inconsistency at Delivery header and Item lev

    Hello Experts
    Incompletion Log V50UC  EXCTR inconsistency at Delivery header and Item lev
    This fields and structure is defined both at header and Item Incompletion procedure .
    But at Header level , the field is getting removed , but not at Item level
    V50UC- EXCTR.
    Can you let me know what to do about this inconsistency / any SAP Note etc .
    REgards
    Rohit

    Hello
    This Incompletion log is related to Foreign Trade.
    Check maintain required foreign trade data at Item
    or If foreign trade is not active for your this business process..Check your config for Incompletion procedure for foreign trade by use TCode VI29.
    I hope this suffice your requirment.
    Thanks & Regards
    JP

Maybe you are looking for