Inconsistant value assignment.

Hi Everybody,
when iam entering the values for a character, it is showing the message as "Inconsistant value assignment. I have checked in CT04. The data type also showing as Numeric.
please advise.
Regards,

Hi,
Check the decimal point,Check the Template format of your character.Also the user profile say 1,2987766.78 or 1.23355667,34.
Regard,
Raj

Similar Messages

Error at sales order: Inconsistent characteristic value assignment

Hi SAPians
There is a problem in variant configuration. I have configurable materials at sales order level with BOMs and super BOMs. When I am executing the scenario, not able to process further after selecting characteristic values for a configurable material. The error saying " Inconsistent characteristic value assignment". I checked all the relevant master data, every thing is okay. But I am not able to proceed further. Can any one provide some valuable inputs for this.
Raksha.

Hi
Did u create variant table (CU61) if not plz and try to make it by tick mark of Decision table..
u can check assignmebt consitance thru CU60 ..if there again blank plz maintain it manually..
basically wt happened during creation of Characteristics and assignment of value in value tab .. there is indicator ..which influence assignment consistance..
hope u may get clue.
correct me if i went wrong..
thanks
mk

Error in Release strategy : Inconsistent Characteristic Value assignment

Hello Gurus ,
Good Day ...
Need your help in release strategy in purchase order .
Thanks in advance .......
Characteristics characteristics value
R2R_PURCH_ORD_TYPE NB
R2R_PURCH_GRP1 001
R2R_PURCH_ORD_VALUE 0,00 - 1000,00 USD
1001,00 - 2000,00 USD
2001,00 - 10000,00 USD
Class assigned char
Z_CLASS R2R_PURCH_ORD_TYPE
R2R_PURCH_GRP1
R2R_PURCH_ORD_VALUE
Rel grp assigned class
PH Z_CLASS
rel grp rel codes
PH 1 -director/VP
PH 2 - manager
PH 3 - buyer
rel grp rel strategy
PH A1
PH A2
PH A3
Now in SPRO -
> define Release Procedures for Purchase ORder -
> Release Strategies
PH A1 Release Strategy 1 (rel. prereq , rel statuses, classification , rel simulation ) working fine
PH A2 Release Strategy 2 (rel. prereq , rel statuses, classification , rel simulation )
ERROR MSG: INCONSISTENT CHARACTERISTIC VALUE ASSIGNMENT
DETAILS :
You want to change the value assigned to a characteristic. However, the change causes inconsistency, so the new value is not allowed.
The inconsistency may be for the following reasons:
A precondition or selection condition is violated.
The characteristic is a single-value characteristic, and different values have been set by constraints, actions, or procedures.
In classification, inconsistencies occur when you change the value set of a characteristic if objects or classes have already been classified with values from the previous value set.
Procedure
Choose Inconsistencies to see what triggered the inconsistency. You can also use the explanation facility for more information.
Delete the values that triggered the inconsistency.
You can only change or delete a value or value set that has already been used to classify objects if you delete the existing allocations.
PH A3 Release Strategy 3 -
> SAME AS ABOVE
regards,
ajay

Hi,
Inconsistency due to different "VALUE" in the Release Strategy & "VALUE" present in the Release Characteristics . Check details with value assignment with designed Strategies.
Also keep following VALUE Release Characteristics for value
<=1000,00.00 USD
1000,00.01 USD- 2000,00 .00USD
2000,00 .01- 10000,00.00 USD
instead of (0,00 - 1000,00 USD,1001,00 - 2000,00 USD,2001,00 - 10000,00 USD )
Regards,
Biju K

Cu 50 Inconsistent characteristic value assignment Message no. C1821

Dear All
sorry I come from Taiwan,my English is not well
I have a question for SAP PP
I study Make-to Order Production with Variant Configuration
I read paper Make-to order Quotation Processing with Vaniant Procing(663)
and In accordance with the file operations
but when i According to cu50 display an error message：
Inconsistent characteristic value assignment，Message no. C1821
creat pland order in tcode co08 display an error message：
No valid BOM exists
i choices "no" display an error message：Error or warning occurred during master data transfer
I do not know how to resolve
Please help me thank you very much

Dear All
Thank you for your help
I found the problem
1.cu50 error message Inconsistent characteristic value assignment，Message no. C1821
ans: the paper Bast Practices Make-to-Order Quotation Processing with Variant Pricing(663) , page 85
Dependency name : YI_PC_YI_005_SELE_OPT
Syntax : $root.YI_004_ADD_OPT='01'
2.creat pland order in tcode co08 display an error message：No valid BOM exists
ans :
a.Tcode cu42 , in BOM application select SD01 for Production-General
b. IMG OPL8 BOM Application sele SD01

DMS - Inconsistent characteristic value assignment

Dear experts,
I've some DMS documents with an 'Inconsistent characteristic value assignment': two values for a single-value characteristic.
I want to correct those documents, but I don't to change AUSP directly. I've tried BAPI_DOCUMENT_CHANGE2, but without results.
Thanks in advance for any help.
Regards,
sb.

Thanks Charlie.
Yes, this is for PR release strategy. I have checked OMGQCK, there is no inconsitency related to char value assignment. But when I tried to assign char values in SAPL0ME2, there is hard error C1821.
I also tried to delete the char from the class but the error is still there. Any ideas?
Thanks
JM

Inconsistent characteristic value assignment

Hi
When I am trying to change the value of the characteristic for relase strategy ; the system is giving me error
"Inconsistent characteristic value assignment"
Kindly reply me

Check this answered link:
Inconsistent characteristic value assignment
Re: PO Release Strategy on Value Based

Dynamic value assignment to a particular column in a vertical ALV

Hi Friends,
In the present program ALV has 44 fields and output row is only one(with some field editable).
My requirement is to change present output to vertical ALV and editable field should be available
as editable.
Now I have changed this to transposed ALV manually(not dynamically) with required fields editable.
Now there is 44 rows and two column "FIELD and "VALUE'.Some values in the second column is editable.
Previously output was like this:
field1   field2 field3 ...
val1     val2    val3   ...
Now output is like:
FIELD   VALUE
field1 value1(type INT)
field2 value2(type char5) Editable(need F4 help)
field3 value3(type date)
My present structure declaration is:
types: begin of ty_itab,
        field type char 50,
        value type char70,
        celltab type lvc_t_styl,(for editing some values in VALUE column).
       end of ty_itab.
data: itab type standard table of ty_itab.
Now the second column i have declared as CHAR70 which contains only char
values because to put all differt types of values to one single column named
'VALUE'.
But as field1 field2 field3... had differnt type of value like integer char date...I need to validate some values
(specially those which are editable) before saving to custom DB table.
So I need dynamic value assignment to VALUE column when preparing internal table for display.
What I want to say is that VALUE column should be able to contain different type of values like INT, DATE, CHAR...etc
Is the requirement is feasible?
If yes then How should I declare the structure and populate different type of values within single column 'VALUE'.
Also is it possible to have F4 helps in the second column (VALUE)???

Hi Manab,
I did something comparable: We have a very complex transaction with several subscreens with multiple fields to be filled with complex logic to create a very special contract. The requirement was to create a method to create a copy of this contract being able to apply some changes.
I created a wizard (transaction SBPT_WIZARD_BUILDER - Wizard-Builder) to accomplish that. I grouped all the fields to just 3 logical groups and thius created 3 stesp where the user gets an ALV as you describe, but we have the rows like FIELD with the new value editable. Additionally I have hidden fields with table name and field name so that I can determine the characteristics (datatype) at run time.
The value fields are just strings (every ALV field is a text field on the surface).
For editable fields, you have an event DATA_CHANGED. I used this method as a handler for the event:
(I will leave out the wizard part here - maybe a good idea for a blog to explain that)
METHOD handle_data_changed.
    CALL FUNCTION 'RS_CONV_EX_2_IN'
      EXPORTING
         input_external                     = <mod>-value
         table_field                        = ls_tabfield
I also created handlers for F1 and F4
Handler for CL_GUI_ALV_GRID->ONF1
METHOD handle_f1.
    CALL FUNCTION 'HELP_OBJECT_SHOW_FOR_FIELD'
      EXPORTING
        called_for_tab   = lv_tabname
        called_for_field = lv_fieldname
      EXCEPTIONS
        object_not_found = 1
        sapscript_error = 2
        OTHERS           = 3.
Handler for CL_GUI_ALV_GRID->HANDLE_F4
METHOD handle_f4.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
    EXPORTING
      tabname    = lv_tabname
      fieldname = lv_fieldname
    TABLES
      return_tab = lt_return_tab
    EXCEPTIONS
      OTHERS     = 5.
    er_event_data->m_event_handled = abap_true.
* if er_event_data->m_event_handled is not set to abap_true, system will handle it.
* In this context the message 'Keine Eingabehilfe verfügbar' will be displayed
ENDMETHOD.
This is just an excerpt from my project. It shows that you can do more in ALV as you knew.
I tried to post a little more but the formatting break down, possibly a result of the character limit
Regards,
Clemens

Problem in prompt value assignment in free hand SQL full client report in BO 6.5

Post Author: simarora
CA Forum: Desktop Intelligence Reporting
I automated the generation of reports using the perl, XML and java servlet. A perl script is invoked by a batch file , URL of BCA scheduler and name of XML file are passed as parameters to perl script. This perl script invokes a java servlet which reads the parameters from XML and pass them to BCA. BCA generates the reports and save the external formats to a specified location.
Two of the reports that are free hand SQL reports fail to generate saying that prompt value assignment failed. Not, sure whether it is due to free hand SQL / shared conenction or something else. I have tried assigning date prompt values in different formats and even in the same format that is set in report SQLs, but it always fails.
NOTE: When generated through BO, these free hand SQL reports got generated successfully without any issues and other reports that are based on Universe get generated by this automation / API without any issues.
Log messages are as below. Please take a look and advise:
Thu Jul 26 05:32:56 2007 INFO read xml file ./XML/ABC.xml Thu Jul 26 05:32:56 2007 INFO content dump of raw xml file:
<ReportingBatch><BroadcastAgent>ABCDEG</BroadcastAgent><BobjUser
name>POIUYT</BobjUsername><Documents><Document><DocumentName>Rank
ing
Report</DocumentName><DocumentType>rep</DocumentType><DocumentId
/><Domain>Domain1</Domain><DatePostFix>false</DatePostFix><Refres
hInNameOfRecipient>true</RefreshInNameOfRecipient><Prompts><Promp
t><PromptName>1. Select Business
Date:</PromptName><PromptValue>7/3/2007 12:00:00 AM</PromptValue></Prompt><Prompt><PromptName>2. Select Cluster:</PromptName><PromptValue>US Interest Rate Products</PromptValue></Prompt></Prompts><Actions><Action>refres
h</Action><Action>ftp</Action><Action>pdf</Action></Actions><Grou
ps><Group>ABC</Group></Groups><FtpServers><FtpServer><Name>Server
1</Name><UserName>user1</UserName><Password>password</Password><D
irectory>/Reports/ABC</Directory></FtpServer></FtpServers><Emails
><Email><Subject>Test</Subject><Body>Test</Body><FromAddress>
email@removed
</FromAddress><Attachments><Attachment>pdf</Attachment></Attachm
ents><Destinations><DestinationTo> email@removed
</DestinationTo></Destinations></Email></Emails></Document></Doc
uments></ReportingBatch>
Thu Jul 26 05:33:07 2007 FAIL Return Code For ./XML/ABC.xml : -1
Thu Jul 26 05:33:07 2007 INFO
BeginningProcessingofbatchfeedonservlet.........
Thu Jul 26 05:33:07 2007 INFO
INFO%3AAttemptingtocreatea+session
Thu Jul 26 05:33:07 2007 INFO
INFO%3ARetrievedWebiServerObject
Thu Jul 26 05:33:07 2007 INFO
INFO%3AValidsessionopenedforuseruser1
Thu Jul 26 05:33:07 2007 INFO
INFO%3ASessionandContextretrieved.
Thu Jul 26 05:33:07 2007 INFO INFO%3ADocumentRanking
Report%2CBeginprocessing******************
Thu Jul 26 05:33:07 2007 INFO
INFO%3AThisisaFull-Clientreportforin-lineprcessing
Thu Jul 26 05:33:07 2007 INFO
INFO%3ADocumenthasbeenopened+successfully
Thu Jul 26 05:33:07 2007 INFO ERROR%3ARanking Report%2CExceptionraisedduringprocessingWebIntelligence+SDK
%2FJSPException-Number%3A1410+-javaError%3AWISDKSpe
cificException---Description%3APromptrequiredtoaccess+thi
s+document.
Thu Jul 26 05:33:07 2007 INFO INFO%3A+Ranking
Report%2CEndprocessing******************

Hi David, this is a difficult taks to answer all these questions in a forum. I suggest if you have valid SAP support you log a case for each issue and BO support will assist.

Characteristic Value Assignment in Sales order

Hi Pals,
I am using the Variant configuration scenario in the sales order. My problem is, when ever i try creating a new sales order and enter a material, it suppose to display the Characteristic Value Assignment screen but for me it is showing the "Display Characteristic Values" Screen. Because of this i am unable to enter the data at the sales order level. what might be the problem for this case.
Kindly help me out in this issue.
Thanks & Regards,
Srinivas.D

Dear,
I hope the following link will help u in giving a good understanding of Characteristic values
help.sap.com/printdocu/core/Print46c/en/data/pdf/CACLCHR/CACLCHR.pdf
Regards,
R.brahmankar

I am working in Numbers and can't seem to change the generic value assigned to the legend. Any advice on how to select the legend and save new values?

I am working in Numbers and can't seem to change the generic value assigned to the legend. Any advice on how to select the legend and save new values?

Ntenich,
If your table has a Header and your Legend text is in the header, it will be picked up by the table.
Jerry

How to get the value assigned in dropdowmlistbox as well as radio button

Hi Everybody,
   Please help me to find the solution for the following:
   1. How to get the value assigned in dropdowmlistbox?
   2. How to get the value assigned in radio button?
I am waiting for the answer and reply...
Thanks & Regards,
ShanthaKumar.KA.

The radio button has a name attribute. That name attribute should be the same as the bean property. Then you just need a
<jsp:setProperty name="mybean" property="*"/>
and the bean's set method will be called for the value of that radio button.
so...
<input type="radio" name="doit"/>
class MyBean
public void setDoit( boolean yes )
//do whatever here
}

Fb60 business place field value assign to branch field

Hi Experts,
for vendor invoice creation in fi by using fb60 t.code i am giving business place & all required fields. My requriment is that business place value assign into branch name by using j_1i7_get_bussiness_place function module.suggest how to assign & how to develop logic in this function module(in ecc6.0).
Regards,
babu

Thanks a lot,
I am not referring to "Business area" here, but i am looking for the "Business Place / Section Code" fields.
While doing Down Payment Request to Vendor in F-47, I want to fill "Business Place / Section Code" fields but they are suppressed.
And this field cannot be controlled through FSG / Posting Keys.
Thanks,
Pavan.

How to Check Characterstic Values assigned for a material

Hi ,
My requirement is , to check each and every material entered in the selection screen and characterstic values assigned to this,
I dont need characterstic values for a material, i have to check whether characterstic values assigned or not , if not i have to give a message..
I used CLAF_CLASSIFICATION_OF_OBJECTS FM for getting charactersic values
it is giving NO classification found , but for tghat material classification is existing subsequently characterstic values are also there, i passed material no with leading zeros also.
i used WMCL_MAT_READ_CHAR_VALUES FM also , but it is giving No charcterstic values found for that Material but characterstic values are assigned for that Material..
Could u please find out ,where i am missing

THIS MATERIAL HAS CLASSIFICATION VIEW AND CHARACTERSTIC VALUES ALSO MAINTAINED
DATA : MATNO TYPE AUSP-OBJEK,
      L TYPE I,
T_CLASS TYPE STANDARD TABLE OF SCLASS ,
T_OBJECTDATA TYPE STANDARD TABLE OF CLOBJDAT.
MATNO ='631165'.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
    input         = MATNO
IMPORTING
   OUTPUT        = MATNO
"use this function moduel...
*Retrieve Batch class , characteristic name and values for Material
CALL FUNCTION 'CLAF_CLASSIFICATION_OF_OBJECTS'
    EXPORTING
     class              = 'ZCA2535'
      classtype          = '023'
     features           = 'X'
      language           = 'E'
      object             = MATNO      "pass material number with leading zeros..
      objecttable        = 'MARA'
    TABLES
      t_class            = t_class
      t_objectdata       = t_objectdata
    EXCEPTIONS
      no_classification = 1
      no_classtypes      = 2
      invalid_class_type = 3
      OTHERS             = 4.
IF sy-subrc = 0.
ENDIF.
BUT IT IS GIVING   NO CLASSIFICATION FOUND

EHS: Set up Table-based Value assignment Error.

Hi all,
We are customizin Basic Data & Tools and when trying to set table based assignments (table TCG11_VAI; program RC1TCG11_02) we are getting no entries in the table. The message shown is always <i>"0 unchanged entries, 0 new entries, 0 entries deleted"</i> independant on the entry criteria
The problem is that we can create those entries manually but it will be endless
Has this happened to anyone before? Any idea?
Many thanks and regards,
Alberto

Hi all,
We have just find the solution.
Just for your information the problem was that the IMG activity "Adopt
Standard Specification Database" was executed but not working properly
because no data can be copied from client 000. Then when executing "Set
Up table Based Value Assignment" no entries were made in the table. We
have just change the client, execute "Adopt Standard Specification
Database" and then "Set Up table Based Value Assignment" and now is
working properly
Alberto

Value assignment and value assignment type in the specification workbench

Hi all,
There is this section on the specification workbench called u201CProperty Treeu201D, this section contains all the value assignment type, I have two questions on this.
Question 1 u2013
What is exactly the value assignment type? The SAP help portal said it is a structure specification data and information. What exactly does it mean and its usage?
Question 2 u2013
May I know where is the SPRO configuration that actually causes the list of value assignment types appear on the property tree section for this particular specification type which I created.
In another word, I create this new specification with specification type u201CREAL_SUBu201C and specification category u201CSubstanceu201C in the specification workbench transaction. Next thing I know is that the property tree section for this particular specification consists of a list of value assignment type. How does the system assigned these list of value assignment types to this specification i created? Coz I didnu2019t do anything.
Where in SPRO and the logic link it up on this??
Thanks.
YY

Hello all
EH&S contains a number of submodules (PS, DG, IH etc.). Regarding each submodule a basic customizing is delivered by SAP. One example is the specification type. Usually you will find something like
REAL_SUB
LIST_SUB
etc. in the Customizing as discussed. Further more I believe with EH&S 2.7. the specification category come in place (SUBSTANCE as an example). You need to take care regarding this too.
An value assignment type can be grouped in a property tree and a property tree can be linked to a specification type and there are cases known that one specification type is linked only to one property tree (this is a decision regarding business needs and not an IT quesition). Using the EHS& surface you can change the property tree per specification if the set up is done in Customizing. Therefore the property tree is a "view" on the data linked to a specification. (identifeirs etc. are managed different)
A "property" is based on a value assigment type and in many cases on a related EH&S class and characteristic. You will find these types.
A => value assignment type to be used if you need characteristics
B => value assignment type to be used if you need specification listing
C => value assignment type to be used if you need composition
.. etc.
You can mix types. That means you can create a property of type "A" and "C" (take a look in SAP original tree; you will find examples how to do it).
A propetry tree is a "list" of assignment type related to a object (specification). Using the property tree you can maintain necessary data. Therefore ithe property tree itself contains per specification the list of "potential" data structures you can fill with data. I belive SAP Standard is delviering now something like 250 properties (valeu assignment types): To e.g. get an MSDS you need to maintain I would assume at least something like 20 up to 50 properties
The area of customizing regrading property tree, specification types etc. is the most crticial to have a sucessful EH&S project running; any wrong decision gives rise to a high cost later Therefore take your time to understand what effect does which customizing acitivity have later.
Based on the value assignemnt you will create later e.g. a WWI report (like MSDS).
Additionally if necessary you can create customer specific value assignment types by either do a copy from SAP original to "Z" (highly recommended to do so!) or starting from basic.
Starting with EH&S 2.7. you have now more options to "change" EH&S using standard EH&S functionality. Take a look in customizinjg (example: you could create you own "look and feel" of the workbench (you should'nt really do that but it is possible). You can design your own "tab strips" etc.
So once again: the "correct" set up of EH&S in the area of e.g. identifers, speficiation types, property trees etc. is the "core" activity in EH&S customizing and therefore think "twice" before you change the setup up (you need to understand what a change mean)
With best regards
C.B.

Inconsistant value assignment.

Similar Messages

Maybe you are looking for