Inconsistencies between B1 SLSP/SLSPP and B1i SLD

Dear Experts,
Can anyone please help me with the error encircled in the attached file? I am not able to run dashboards and I guess this error is the cause.
Any help will be highly appreciated!
Thanks & Regards,
Aakash Deliwala

Hello,
Check weather the Company Database names are available in SLD Integration Framework.
If Does not exist then follow this:
1. Go to SQL Server>SBO_Common (DATABASE)>Table>SLSP. Check all your company database are available or not?
2. If database exists then DELETE your Company Database.
3. Go to SAP and Refresh your database.
4. Check your JAVA version. It should be greater than Version 5.
5. Now Install Event Sender. (Your System Drive:/Program Files/SAP/SAP Integration Framework/Event Sender/Setup. Step 3/5 Test Connection. And Finish.
6. Now restart your SAP Integration Framework Services.
7. Now go to Integration Framework & there you can see your Company Database in SLD.
This will remove inconsistencies between B1 SLSP/SLSPP and B1i SLD
Kind regards,
Jai

Similar Messages

Diffence between XI 3.0 and PI7.0

Hi
I am having one dought. what are defferences between XI 3.0 and PI 7.0 at Mapping and in IR and ID.

Hi,
1.All new features for XI 7.0 are almost same as for XI 3.0 at least till SPS 19.
Some differences are as follows:
Adapter Enhancements like JMS, JDBC, Oracle-JDBC and CIDX Enhancements
New Conversion Agent,
Receiver Determination Enhancements
Multi mapping
User defined enhancements
Unbounded Processes (Integration Processes).
2. One more difference is the ABAP stack (which is 7.0 and not 6.40) but from the developer point of view there is nothing new.
3. PI 7.0 = XI 7.0
4. For each SP in XI3.0 there is a corresponding SP being released for PI (XI 7.0). A comparison of the service packs in 2004 and 2004s:
In 2004 - In 2004s
SP12 & lower = SP04
SP13 + 14 = SP05
SP15 = SP06
SP16 = SP07
SP17 = SP08
SP18 = SP09
5. XI3.0 is based on WAS(web application server)6.40 - NW2004
PI7.0 is based on WAS(web application server)7.0 - NW2004's
There is not much difference between XI 3.0 with latest Service Pack i.e. 20 or 21 and PI 7.0
The main difference between 3.0 and 7.0 is the GUI in SLD. But, it is pretty easy to adopt. All other components, e.g. IR, ID, RWB, should virtually be identical.
7.0 also contain some SCM contents not available from 3.0. For most of us, this is a non-issue.
In 7.0 we can schedule a background job and edit the payload.
XI3.0 is based on WAS(web application server)6.40 - NW2004
PI7.0 is based on WAS(web application server)7.0 - NW2004's
Currently SP 21 for XI 3.0 and SP12 for PI 7.0 is the latest one.
ref:http://help.sap.com/saphelp_nw04/helpdata/en/cf/9844428e9cbe30e10000000a155106/frameset.htm
See This Thread on the Same Discussion
Diff between XI and PI
http adaptor on which factors we will use
differences between xi 3.0 and pi 7.0
Difference/ changes from XI 3.0 to PI 7.0
give me main advantages of XI-7.0 TO XI-3.0
XI 7.0 vs Xi 3.0
XI/PI
XI vs. PI
XI 3.0 vs. PI (XI 7.0)
Difference/ changes from XI 3.0 to PI 7.0
moving from XI 3.0 to PI 7
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/xi%2band%2bpi%2bglossary
Reward points if helpful.
Thanks,

Urgent pls ---- How to install SAP XI and check SLD configuration

Hello,
Pls send me links/pdfs/how to guide links --- to install SAP XI and check SLD configuration.
Regards

Hi,
A copy:
Links:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/73527b2c-0501-0010-5398-c4ac372c9692
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6bd6f69a-0701-0010-a88b-adbb6ee89b34
Follow these steps while installing XI:
1. Windows server or advanced server with latest service patch.
2. IE 6.0 with latest service patch
3. Install Microsoft office and winzip, acrobat
4. Install JDK with version 1.4.2_03 or above with the corresponding JVM
5. Install the SAP GUI 6.20
6. Make sure that you have hard disk space of 10 GB in C drive and 50 GB in the installation drive.
7. Make sure the virtual memory is between 512 and 1594 or above for the installation drive.
8. Copy the dumps of following DVDs into the installation drive.
Installation Master DVD
Installation Export
Additonal Components for SAP BW/SAP XI,SAP MI,SAP KW
SAP Web As Java
9. Start the installation from the DVD dump Installation Master DVD.
10. When installing the ABAP Database the SID of the oracle default database should be different the ABAP database SID.
U can go through the Installtion Guides for Installing XI from http://service.sap.com/instguides (SR1 installation)
u can also refer to service.sap.com/platforms to see the available platform on which XI can be installed. ( Windows/linux/UNIX)
or you can even go through this weblog which clearly talks to you about XI installation
XI installation: https://websmp202.sap-ag.de/~sapidb/011000358700009389172004E.PDF
In addition to this installation guide you also need to download the XI configuration guide which is very useful for technical configurations of various adapters and XI system.
At the same place you will also get the XI configuration guide e.g XI30ConfigGuideSPS11.pdf.
U can also download SAP Exchange Infrastructure 3.0 SR1 Installtion Guide from the articles scetion.
ABOUT XI :
If its just that you wanted to know more about sap xi....then the information below should definitely help you.
The best way to learn XI would be to make the maximum use of XI from its forums, weblogs, presentations, etc in SDN.
First I thought I will just give u the basic steps involved in doing any scenario in XI. This is very essential for a beginner.
First of all you would need to define your product, software component, business system and configure the technical landscape in the sld.
You then go on to create the objects in the repository, you import your software component here and then begin your design steps. To import your RFCs n Idocs if you require any before proceeding.
Then under the name space which you want, you go on to define your data types, message types and message interfaces.
Then you do your message mappings where you specify your source and target message types and the relation between them, then you do your interface mapping. If you are using a BPM, you do the integration process.
Once you have this done, you will have to move to the directory, here is where you define how you use the objects and how you configure them to work as a scenario.
You assign your business system to the configuration scenario which you have created, and create the communication channels. Then you go on to configure the receiver determination, interface determination, and the sender and receiver agreements. Once youre done you will have make sure you activate your objects. The exact parameters steps depend on what kind of scenario you are implementing.
You can use sxmb moni or the runtime workbench to monitor the entire scenario which you have done.
Also I would suggest this link on SAP help for any info that you want on XI,
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
<b>
Cheers,
*RAJ*</b>

Connections between decentral adapter engine and other components

Hi,
is there any documentation of what connections are needed between decentral adatper engine (DAE) and PI, SLD or other
components for configuration/monitoring&alerting and at runtime?
I need this information because our client has a very strict firewall policy and we are not shure
if we can place an DAE in a given zone of his network. It is very important which protokoll is used and in which
direction the connection is initiated (from PI/SLD/... to DAE or vice versa).
Best regards and thank you very much!
Stefan

Hi
Refer these links .
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/03fd85cc-0201-0010-8ca4-a32a119a582d
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/327dc490-0201-0010-d49e-e10f3e6cd3d8
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/webinars-nw-rig/configuring%20a%20local%20adapter%20engine%20to%20work%20with%20a%20central%20instance%20-%20webinar%20powerpoint.pdf
Regards,
Surya

Possible to segment traffic between 2 interfaces? And other questions...

I would like to set my G5 up as a server utilizing a second connection and to keep traffic seperated between this server connection and my regular internet connection (would be wireless). I'm pretty sure this alone is fairly straightforward and can be accomplished by setting up the new interface and moving it down to the bottom of the connection list with wireless at the top. That should keep all non-specific traffic from flowing out the ethernet/server connection - I think.
If the above works the way I stated then I would also want to firewall ONLY the ethernet/server connection (the wireless has it's own hardware firewall). AND - this is the tricky part - I also want to add a fake interface that has a fake IP and bind that to the "real" ethernet/server connection. The reason for that is because I need a static IP to bind the service to. I know if the connection list thing works to flow the traffic that if I had an external router on the server connection, this wouldn't be needed. I'd already have a fake IP to bind to and I wouldn't have to run the firewall on the Mac. But I don't and I'd rather not have to buy one.
So can this be done through the network/sharing preferance panes? If so, are there any "gotchas" I should be aware of? If not, is there any software tool out there that would make setting this up easier/faster? I'm not opposed to doing it all via command line, but I'm a bit rusty with my linux/unix admin knowledge. Plus I'm not 100% certain how to set all that up command line wise without screwing up OS X!
Thanks.

I'm not sure I fully understand what you are attempting to accomplish. Lets see if I have the general idea.
You have a single G5, that you want to use as both your desktop machine and also to provided specific services, such as web, email, etc.
You have some type of hardware firewall/security appliance.
You have some type of wireless access point.
You don't seem to have any type of router or switch in your configuration.
You want all of your server based traffic to be sent and received on it's own Ethernet port. You want your personal Internet traffic to be sent and received on your wireless connection.
So my questions are:
Where is the server traffic going to, coming from? Who is accessing the server, is it users on the Internet, or just computers on your own LAN (which you didn't mention).
If your server is to allow data from or send to the Internet, then you need to have a way to route the traffic there. Do you have more then one method to access the Internet, or will all traffic, both personal and server being going though the same Internet access pipe?
If it is all going through the same pipe, and you only have the single computer, I don't understand why you wish to segment the traffic.
If on the other hand you have multiple computers on your LAN. then segmenting traffic may make sense. This would allow access to your server and keep your LAN well secure.
Anyway, to get to specifics, you'll need to use the terminal app to bind specific services to specific IP's and ports on your Mac. You will also need to manually configure the firewall to be able to select specific connection ports and bindings. However, while I think it can be done, I'm not sure it makes a great deal of sense.
I would be more inclined to suggest a router or switch that can provide VLAN support, or a router that provides true DMZ support, would be a good way to go.
Anyway, a little more info would be helpful.
Oh and if I have this totally worng in what I think your doing.. My mistake.
Tom N.

Error while adding a used relationship between the New DC and the Web DC

Hi Gurus
We are getting the Error in NWDS while Adding a used relationship between the New DC and the Web DC.
Steps what we are Done
1. Create the custom project from inactiveDC's
2.creating the project for the component crm/b2b in SHRAPP_1
3.After that we changed the application.xml and given the contect path.
4.Then we tried to add Dependency to the custom create DC we are getting the error saying that illegal deppendency : the compartment sap.com_CUSTCRMPRJ_1 of DC sap.com/home/b2b_xyz(sap.com.CUSTCRMPRJ_1) must explicitly use compartment sap.com_SAP-SHRWEB_1 of DC sap.com/crm/isa/ like that it was throwing the error.
so, we skip this step and tried to create the build then it is saying that build is failed..
Please help us in this regard.
Awaiting for ur quick response...
Regards
Satish

Hi
Please Ignore my above message.
Thanks for ur Response.
After ur valuble inputs we have added the required dependencies and sucessfully created the projects, then building of the projects was also sucessfully done and EAR file was created.
We need to deploy this EAR file in CRM Application Server by using the interface NWDI.
For Deploying the EAR into NWDI, we need to check-in the activites what i have created for EAR. once i check-in the activites ,the NWDI will deploy the EAR into CRM Application Server.
In the Activity Log we are able to check the Activities as Suceeded but the Deployment column is not showing any status.
When i right click on my activity Id the deployment summery is also disabled.
So finally my Question is that where can i get the deployment log file, and where can i check the deployment status for my application..
Any pointers in this regard would be of great help..
Awaiting for ur valuble Responses..
Regards
Satish

The difference between VGA, DVI-D and ADC?

Hi.
The difference between VGA, DVI-D and ADC and which should be used with a T244 widescreen monitor into a Quicksilver G4 with a GeForce2 MX nVIDIA (0x10de) card. What's a good upgrade card if the above is not good enough?
Thank you for your input.
Walter

Look at this link http://en.wikipedia.org/wiki/DigitalVisualInterface
 Cheers, Tom

The difference between AIR-ANT5135D-R and AIR-ANT5135DB-R

Hi,
Anyone know what is the difference between AIR-ANT5135D-R and AIR-ANT5135DB-R ?
From the dynamic configuration tools for 1252 and 1242, AIR-ANT2422DB-R is inside one of the antenna option.
However, I can't find it in the "Cisco Aironet Antennas and Accessories Reference Guide"
http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/product_data_sheet09186a008008883b.html
Inside the document there is only AIR-ANT5135D-R.
likewise for the 2.4 GHz, AIR-ANT2422DB-R is inside the dynamic configuration tools and not inside "Cisco Aironet Antennas and Accessories Reference Guide"
Any help would be appreciated
Thanks,
Richard

Found the difference, AIR-ANT5135DB-R and AIR-ANT2422DB-R are non-articulating antennas.
Thanks!
Richard

The difference between Telepresence Content Server and MSE 3500

Good day! Could someone explain me what's the difference between Telepresence Content Server and MSE 3500? Why do I need to obtain two these devices for sorting out my tasks? I want to understand gist of the first and the second devices.

In addition to what Jonathan posted above, here is a Capture Transform Share Solution Guide that goes over a little bit of what the TCS and MXE are and some possible deployment scenarios.
In short, TCS is used to record video conferences or lectures that can be streamed on demand or live using various streaming or distribution methods. One such distribution method is using the MXE 3500 to ingest the recordings from TCS and convert them to different media types and add in-video content such as logos etc. However, from the MXE, you can't send the video back to the TCS for viewing, you'd need to send that off to another viewing portal such as Show and Share.

The difference between SSO/NSF(GR) and NSR

Hello
I have question about the differnce between SSO/NSR(GR) and NSR.
In my understanding SSO/NSR is stateful switchover from Active to Backup
Mainly take over teh startup configuration and FIB TCAM table and so on.
But this protocol need to re-establish the routing table and topology database etc.
But if NSR functions when stateful switchover happens then it takes over routing table
and toplogy database etc. right?
If so, I think BGP peer down/up (flapping) , OSPF/EIGRP neighbor state change does not happen right?

ITS is used for accessing R/3 through browser....to implement SSO from Portal to access backend R/3 systems over ITS you need to follow certains step ...
1. Create RFC Destination in J2EE Engine RFC JCo Provider
2. Create RFC Destination in the R/3 Transaction: SM59
3. Maintain Portal Server Settings for the Portal
4. Maintain Single Sign-On in the R/3 System
5. Export R/3 Certificate to the Portal System
6. Import R/3 Certificate to the Portal
7. Create R/3 System in the Portal
8. Configure User Management in the Portal
9. Export Portal Certificate from Portal
10. Import Portal Certificate to the R/3 System
11. Set Up Repository Manager for R/3 in the Portal
12. Maintain User management as SAP Logon Ticket in the Portal
Hope I have answered your query in proper way.......
If you want step by step details pl s let me know
Swapnil

RFC connection error between BW 3.5 and ECC 6.0

Hi gurus,
We've defined an RFC destination between BW 3.5 and ECC 6.0. Connection test (SM59) is ok, but authorization one fails and ALEREMOTE users block. These users on both systems have good profiles. We look ST22 and find a runtime error on CALL_FUNCTION_REMOTE_ERROR. We've cleaned source system on BW and RFC destination and we've created one more time, but error doesn't disappear. We've looked OSS but don't find anything.
Any idea? Is there any other place (users, RFC) where we have to change user password on system?
Thanks a lot!
Regards,
Iván.
Edited by: Iván Cabezas Castillo on Nov 6, 2009 12:09 PM

Solved!
This is because of the incompatibility of password handling between
640 and 700 systems.
We have to use a maximum 8 character long password with only capital letters (numbers are also allowed) for the user "ALEREMOTE".
1. Change the password for the user in SAP R/3.
2. Maintain the password in SAP BW for the RFC destination (transaction SM59 - Logon/Security tab)
3. Authorization test is now successful.
(SM59 - Test - Authorization).
Regards!

What is difference between Service map iview and Workset Map iview

Hi Experts,
Can anyone tell me the difference between service map iView and Workset Map iView.
When I am creating these iViews, its seams both are same. I canu2019t find difference still, can anyone help me out of this
Thanks in Advance
Janardhan

Hi,
Service Map Iview:The Service Map iView is an ERP-specific variant of the portal Workset Map iView. It serves as a central point of entry and guided access to the services of SAP service modules such as the Manager Self Service (MSS) module, or the Employee Self Service (ESS) module.
Workset Map iview:A Workset Map is the equivalent of a site map, providing users with explicit information on the functionality that is available in a given workset. It is based on an iView, and serves as a central point of entry and guided access to the contents of a workset.
if you want to more info pls go thr the below thread
Workset Map iView
i hope it will help you
Thanks,
Sreeni.

What is difference between ADF Task Flow and Faces-Config - when delpoy ?

What is difference between ADF Task Flow and Faces-Config? When I create navigation between pages with ADF task flow then the navigation don't work when I deploy my application to Weblogic 10.3. When I use default server then navigation works fine. With Faces_config in both situations all works ok - on Stanalone server and default.
Where is the problem?
Best regards!

Shay, I don't use both faces-config and adf task flow! When I failed with task flow I tried faces-config.
I have active on my weblogic - adf.oracle.domain(1.0,11.1.1.0.0). This is the right ADF? If yes then where is the problem?
Best regards!

What is the diffrence between package javax.sql and java.sql

Is javax designed for J2EE?
And when to use package javax?

Hi,
What is the diffrence between package javax.sql and java.sql?The JDBC 2.0 & above API is comprised of two packages:
1.The java.sql package and
2.The javax.sql package.
java.sql provides features mostly related to client
side database functionalities where as the javax.sql
package, which adds server-side capabilities.
You automatically get both packages when you download the JavaTM 2 Platform, Standard Edition, Version 1.4 (J2SETM) or the JavaTM 2, Platform Enterprise Edition, Version 1.3 (J2EETM).
For further information on this please visit our website at http://java.sun.com/j2se/1.3/docs/guide/jdbc/index.html
Hope this helps.
Good Luck.
Gayam.Srinivasa Reddy
Developer Technical Support
Sun Micro Systems
http://www.sun.com/developers/support/

What is the diffrence between My Runnable Interface and Java Runnable

Hi folks
all we know that interfaces in java just a decleration for methods and variables.
so my Question is why when i create an interface its name is "Runnable" and i declared a method called "run" inside it.then when i implements this interface with any class don't do the thread operation but when i implement the java.lang.Runnable the thread is going fine.
so what is the diffrence between My Runnable Interface and Java Runnable?
thnx

Hi folks
all we know that interfaces in java just a decleration
for methods and variables.
so my Question is why when i create an interface its
name is "Runnable" and i declared a method called
"run" inside it.then when i implements this interface
with any class don't do the thread operation but when
i implement the java.lang.Runnable the thread is going
fine.
so what is the diffrence between My Runnable Interface
and Java Runnable?
thnxClasses and interfaces are not identified by just their "name", like Runnable. The actual "name" the compiler uses is java.lang.Runnable. So even if you duplicate the Runnable interface in your own package, it's not the same as far as the compiler is concerned, because it's in a different package.
Try importing both java.util.* and java.awt.* (which both have a class or interface named List), and then try to compile List myList = new ArrayList();

Inconsistencies between B1 SLSP/SLSPP and B1i SLD

Similar Messages

Maybe you are looking for