Inconsistencies data between ODS and RSA3 in SAP system (delta problem??)

Hi everyone,
I have a problem in my SAP BW production system. There is inconsistencies data between ODS (using tcode LISTCUBE) and Datasource in SAP system (tcode RSA3).
I'm using Datasource: 0FI_GL_10 and ODS: 0FIGL_O10.
In SAP system (using RSA3):
GL Account: 1202012091
Comp Code : 5400
Bus Area: 5401
Fiscal Year :2008
Period: 07
Accum Balance : $0
Credit Total: $350
Debit Total: $350
Sales : $0
And in ODS (using ListCube):
GL Account: 1202012091
Comp Code : 5400
Bus Area: 5401
Fiscal Year :2008
Period: 07
0BALANCE : $350 (it should be $0,shouldn't it? )
0CREDIT: $0 (it should be $350,shouldn't it? )
0DEBIT: $350
0SALES: $350 (it should be $0,shouldn't it?)
I have tried these :
1. Check if there is a start routine / routine or not in transfer or update rules....and...i get nothing
2. Check the data using tcode FBL3N..but the data is ok
And then i tried to trace the process chain and find error on delta infopackage which pull these data
Date
07.30.2008 : 231141 records --> error (ODS activation) --> request has deleted forever
07.31.2008 : 2848 records --> error (ODS activation) --> request has deleted forever
08.01.2008 : 135679 records --> error (ODS activation) --> request has deleted forever
08.02.2008 : 135679 records --> successfull repeat delta action
From 30 July until 1 August there is an error on delta infopackage because
fail to activate ODS (No SID found for value 'RIM' of characteristic 0UNIT). On 2 August someone delete the red requests and repeat the delta and success. Is there any possibilities that this problem arise because of this? If this the cause, how to bring back 2848 and 231141 records which has deleted?
Thank you and Regards,
-Satria-

Hi everyone,
I have solved my problem. I executed my infopackage again (selection condition using GL Account which have wrong amount) with update mode 'Full update' and choose Scheduler > Repair Full Request and tick the checkbox.Thank you.
Regards,
-Satria-

Similar Messages

Setting up SSO between EP and back-end SAP systems

Can anybody give me some insight about setting up SSO between EP and back-end SAP systems. If possible some links to write up would be great.
Thanu

Hi,
This link gives you a detailed information on setting up SSO : http://help.sap.com/saphelp_nw04/helpdata/en/89/6eb8deaf2f11d5993700508b6b8b11/frameset.htm
Some How-guides:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e676ec90-0201-0010-cfa3-90b7c1291903
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/77378b3d-0b01-0010-ffa5-c6941e286c43
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80fbc690-0201-0010-1aba-93d5c8232b4a
Regards,
Sunil

Diffrerent data between table and RSA3

Hi all,
I got one prduction order.We filled the setup tables.
Later we changed production order.We deleted and filled the setup tables again.
But in RSA3 Its showing the same dates wht we before.
In tables also its showing changed information.But in RSA3 the old ones we r getting.

Krish,
Give a new run and fill the setup tables. This might be due to the validity of given before the run. Check it once.

Secure the file/data transfer between XI and any third-party system

Hi All,,
I would like to use to "secure" SSH on OS Level the file/data transfer between XI and any third-party system Run OS Command before processing and OS command After processing. right now my XI server installed on iSeries OS.
with ISeries we can't call the Unix commands hope we need to go for AS400 (CL) Programming. If we created the AS400 programm how i can call that in XI.
If any one have idea pls let me know weather it will work or not.
Thanks in adavance.
Venkat

Hi,
Thanks for your reply.
I have red some blogs like /people/krishna.moorthyp/blog/2007/07/31/sftp-vs-ftps-in-sap-pi to call the Unix Shell script in XI.
But as i know in iSeries OS we can write the shell script we need to go for AS400 programe. If we go with AS400 how we need to call that programe and it will work or not i am not sure there i need some help please.
Thanks,
Venkat

Why replicate Master Data between CRM and IS-U?????

Hello colleagues,
I am at a customer who is already replicating Business Partner and Contract Accounts between CRM 5.0 and IS-U (ECC 6.0).
He is using CRM IC WinClient where most of the processes are implemented as transaction calls in IS-U.
There is a possibility to replicate all objects (Accounts, Connection Objects and Installations) but what is the purpose of doing it.
Could anybody tell me what is the advantage of replicating all objects and having them redundant?
Why to replicate?
I just found information on how to replicate but not why.
Thank you very much for your help in advance,
Edgar Kauter

Hi All,
The major thing is we should not use ISU as stativ and CRM dynalic system. As we all aware When SAP is launching any module or technology its beleives in re-usabilty.
Now the issue data replecation between CRM and ISU-
1. In a utility market if the customer,retailer and the network operator initiate any business flow they should start with CRM as CRM is handling FOP part.It means CRM has not only build only for ISU.
2. In ISU before billing so many things is getting triggered - like new connecion,transfer,move-in,move-out etc....these process cant be done with the CRM business module as I mentioned earlier CRM is not only designed for IS-U
So for a smoother process and with proper business SAP introduced CRM IS-U.
Without replacting the data between CRM and IS-U we cant process the steps which will at last billed a customer.
Regards.
Abinash

What's the difference between WorkflowTask and WorkflowJob in SAP MDM API?

Hi Support,
Could you tell me the differences between WorkflowTask and WorkflowJob in SAP MDM API? And which can represent a workflow in Workflows tab in MDM Date Manager.
Thanks & Regards,
Song

Hi Songxu,
Workflow Task: It is the task(workflow steps like Process, Approver etc) assigned to different user during Workflow. User's use the workflow tabs in Data Manager to view and process workflow tasks. see page 91/654 of Data Manager Guide.
http://help.sap.com/saphelp_nwmdm71/helpdata/en/4b/72b8aaa42301bae10000000a42189b/MDMDataManager71.pdf
Workflow Job: Each workflow is invoked as a job that can consist of multiple records that move through the steps of a workflow (how many records are involved into your Workflow) as a group while simultaneously maintaining record-level granularity. Once the job has been launched, it moves automatically from step-to-step and from user-to-user, showing up in the inbound task queue in each useru2019s Workflows tab for disposition and processing.
Regards,
Mandeep Saini

Please write the difference between ODS and DSO...

Hi all,
Please write me the differences between ODS and DSO.. I think both are same in structure and have same update types (Over write, Addition) and also with the tables (changelog, Activation queue, Active table).. Is there still a difference between ODs and DSO...I can assign the points..
thanks
arya

Hi,
You can check the below document for new Features in BI:
http://help.sap.com/saphelp_nw04s/helpdata/en/a4/1be541f321c717e10000000a155106/frameset.htm
/people/martin.mouilpadeti/blog/2007/08/24/sap-netweaver-70-bi-new-datastore-write-optimized-dso
Reg
Pra

What is the difference between ODS and PSA?

DIFFERENCE BETWEEN ODS AND PSA?

hi..
ODS:
Stores consolidated data on the document level.
Data is stored in transparent tables.
Reporting is possible.
Represented on the database by three transparent tables.
Stores Transaction data.
Can merge data from different infosources.
Can be defined as a datasource for another Bw system.
ODS has granular data, it is volaital.
ODS having the Over write functionality
contains Current data
PSA:
It is source system dependent.
Stores data in 2-D format.
We can edit data in PSA.
Reporting is not possible.
used mainly for performing manual update or simulate update or reconstruction.
partition is possible.
Data stored in psa can be used for several purposes.
Repeated delta updates possible.
Error handling posibility.
Structure of PSA is called as Trasfer structure.
It stores the data exactly like how the data is presented in the source system.
We have psa and ODS but we can't do reporting on PSA
You can do reporting in ODS , In PSA u cant do reportin directly
ODS contains detail -level data , PSA The requested data is saved, unchanged from the source system. Request data is stored in the transfer structure format in transparent, relational database tables in the Business Information Warehouse. The data format remains unchanged, meaning that no summarization or transformations take place
In ODS u have 3 tables Active, New data table, change log, In PSA u dont have
We can only add in PSA and change, add and delete in ODS.Is the statement true?
we can edit/add the records in PSA and delete the records,
i thjink its not possible to edit the records in ODS, u can delete the records, and u can add records in ODS
check out this link..
PSA and ODS
hope it helps..

Events limit can only be dates between 1 and 9 on the day field

Im an student, and im trying to put my timetable into ical as did last year
it goes ok, i set it up to repit every week mondays lessons for example
but when i am trying to set up a limit for this event to repit itself ical only allows me to
put a date between 1 and 9 on the day field.
Does anyone know why is that?
sorry is my english is not so good im from spain and i might not explained very well
thank you

The x86 architecture has a standard formatting for disks that uses up to four primary partitions on a disk. On DOS or UNIX, you can view the partitions with 'fdisk'.
This is layer that Windows and Linux tends to use for filesystems.
Solaris though uses only one of those partitions for its own use (marking it a Solaris partition) and places a label similar to that on a SPARC disk (VTOC). So within the single x86 partition are several further subdivisions (slices).
On solaris, the disk might be /dev/dsk/c0t0d0. You could access one of the Solaris (VTOC) slices as /dev/dsk/c0t0d0s0. As far as I know, Linux does not understand how to address the Solaris VTOC slices (If this isn't true, I'd love to know what the syntax for doing so is).
You'd access the (non-Solaris) x86 parititions like /dev/dsk/c0t0d0p1 or so. While Linux can address extended x86 partitions, Solaris can only address primary partitions.
Darren

How to sinck data between production and R12 instance

Hi,
I am working on Oracle Apps up-gradation project.
Now I have upgrade 11.5.7 to R12 (12.0.4) successfully. I started up-gradation task with 1 May of production data (backup) on new machine.
Client wants to live R12 from 1/August/2009.
Please suggest how to sinck data between production and R12 instance.
Thanks
Anup

Hi,
It is not possible to do what you propose (sync data from an 11.5.7 system to a 12.0.4 system). You will need to re-run the upgrade against the August 1 data, following your original upgrade procedures.
Regards,
John P.
http://only4left.jpiwowar.com

How to pass series of dates (between startdate and enddate) to subreport, which takes only one date as parameter

Relatively new to Microsoft report services. I have created a report which takes a single parameter named 'SelectedDate'. This report runs fine (uses complex query of hours of the selected date and complex joins & aggregate calculations between SQL
database tables). I created a new report with two parameters, namely, StartDate and EndDate. Also created a sql stored procedure which gives all dates between StartDate and EndDate. Added subreport to this report which calls my first report and defined 'SelectedDate'
parameter to get the value as "=First(Fields!dt.Value, "DataSet1") - where dt is the resultset of procedure called in DataSet1. When I run this report, in the subreport, all I see is the report for 'StartDate' which is the passed
value of the first parameter. I can't find a way to pass entire array of dates as parameter, to which user can browse forwards and backwards. Any idea? Thanks in advance for your help!

HI Visakh16..Never mind my comment..I tried it again. This time I went to the completion of previewing..and noticed that the table with DataSet1 does display dates and first report underneath but once I click any other date, it displays the subreport on
full page and navigation back arrow (with hint 'back to Parent Report) solution is not bad..so unless you a way to achieve my desired layout mentioned above - I am good for now! Thanks for your pointer in right direction!
One small observation for thread readers: When I published the report to the report server, the back button (back to Parent Report) which was available to me at design time, is not displayed at client's browser. Upon checking pertinent threads, concluded
that this is known issue for years and recommendation I concluded from various threads is: Use back button of browser and it should (& did) keep the parent report page, with table with selected dates intact. A few have noticed different behaviour
for older browser versions.

Issue for currency exchange for curr types JPY,IDR and data will be moving to other SAP system(APO).

Hello All,
During validation of data between APO and BW its required for the manual intervention by multiplying leading 0’s(multipl with 100) to the key figure values.
So it is required to change the following key figures in the BW datasource to the external format.
data flow: (I.C-1 to I.C2)BW to I.C-APO
This is so that the small TCs like JPY, IDR, etc. are in the correct format when we extract it in APO.
Could you please suggest how should we solve this issue
Thanks and Regards,
Siva

Thank you Ethan,
Let me try to explain this with few dollar amounts:
Let us consider that I have data for 1st month (Jan) of the year 2011,
Net income for Jan. 2011 in LC = 59916152.19
Net income for Jan. 2011 in USD calculated using Average rate is = $ 9,223,013.14
CTA for the same month is (net income in LC X spot rate) - net income in USD at average rate =((59916152.19)*(0.154617))-9223013.14 = 41,042.564
This value is correct.
For the month of Feb 2011:
Net income for Feb.2011in LC = 60415519.01
Net income for Feb.2011 in USD at average rate (with periodic flag on) = 9,300,112.38 ( I calculated this value manually and it is correct after conversion)
calculated CTA for the same month is (60415519.01*0.154083)-9300112.38 = 8,892.035.
But actually BPC calculated CTA is 18,547.56 (I felt that this may be because I am not using the Flag apply periodic value while calculating CTA and when I flagged that, BPC is giving me a very big difference in CTA)
My balance sheet is exactly off with the difference in CTA.
Hope this helps you to understand my problem.
Edited by: amarnathputta on Nov 25, 2011 2:43 PM

Using EPMA to transfer data between HFM and Essbase on 11.1.1.3

Can we use EPMA to transfer data between HFM application and Essbase cubes on Hyperion version 11.1.1.3?
As far my understanding we can only link HFM and Essbase through EAL.
I would be very keen to know from the audience if we can use EPMA to transfer data between HFM and Essbase
Hyperion version 11.1.1.3
Windows 2003 64-bit
Regards
Yogananda Bharadwaj

Hi Yogananda,
Check epma admin.pdf, page 439. Chapter 19 describes how to synchronize and map data between Hyperion applications, interface tables, and external files via EPMA Data Synchronization.
Regards,
Thanos

Is there any way for updating wrong data in ODS and infocube?

Hi all
Is there any way for correcting wrong data in ODS and infocube?

You could do a selective deletion, by specifying the filter values, so that you only delete a subset of the entire data. You could then do a re-load for the same selection so that there is no duplication of records.
This is on the assumption, that your incorrect data is due to some incorrect update or transfer rules, which you have now corrected (before the re-load).
mate, you have mentioned that You could then do a re-load for the same selection .
could you please tell me how to do a re-load ? thank you very much

Jobchain scheduling with EVENTs and in different SAP systems or isol. grou

Hi,
I have the following task:
- Jobchain A in SAP system 1 raises EVENT E1
- Jobchain B in SAP system 1 raises EVENT E2
- Jobchain C should run after A and B in SAP system 2.
Jobchain A and B are defined in isolation group I1.
Jobchain C is defined in isolation group I2.
Where and how do I have to define the EVENTs.
We have a full demo version.
Thanks.
Br
Günne

Hi Günne,
The main idea of isolation groups is that there are no dependencies between objects/jobs/... in different isolation groups.
So the job chains need to be in the same isolation group.
Kind regards,
Anton Goselink.

Inconsistencies data between ODS and RSA3 in SAP system (delta problem??)

Similar Messages

Maybe you are looking for