Inconsistencies during role update

Hello Gurus,
Scenario: When custom tcodes are added to an existing role and the profile re-generated, the change documents shows deletion of some other Auth Objs from the same role.
We found that, upon the addition of the custom tcode, ACTVT 01 was removed from one of the Auth Objs and the chnage documents were showing that some other standard Auth Objs has also been deleted.
Can anyone provide some insight on this scenario.
Please note that just for testing purpose, we had created a test role by copying from any existing role, here too the chnage documents showing deletion of some Auth objs.
Is this a problem, with the Change Documents , which are being displayed here. Also, would like to re-confirm if manually added ACTVT gets overwritten if a new tcode is added to the existing role.
Regards

Hello Suman,
[SAP Note 113290|https://service.sap.com/sap/support/notes/113290] gives you the answer.
b.rgds, Bernhard

Similar Messages

Resource account password set during User Update process.

Hi friends,
I added to the Update WF a step to initialize an account password when, during the update of the user, IDM creates the new resource account.
This is an initial password (known).
This event basically happens in two User's Update cases:
A. when the account was (accidentally) removed from the resource
B. when a new Role requires to add a new resource account to the user
In both cases IDM (re)creates the user account on the resource.
In order to set this account initial password, I check (in the Update WF) the value of 'user.update.toCreate': if it contains the resource name, then I set the pw after the account has been provisioned.
This method fails during case B. only when, for some reason, the resource account already exists BEFORE the update starts: even if the account is already there, IDM sets 'user.update.toCreate', leading my step to reset the account password to the initial value.
What could I check in order to avoid it? (I don't want to reset account passwords when linking existing accounts)
The only way I see at the moment would be to query the resource at the beginning of the Update WF to check if the account is already there...
MTIA

Hi,
Have you found a resolution to this problem?
Thanks
Edited by: sun_to_Orcl on Jan 31, 2010 8:28 PM

HT201628 My girlfriend accidentally rebooted her iPod during an update, and now it won't boot. How can this possibly be fixed?? She says the OS has been wiped. You know how to fix this??

My girlfriend believes she's wiped out the OS on her iPod 4th generation she said she did this by accidentally rebooting her iPod during an update, and now her iPod just shows the apple logo then fades to white. My question is, can this be fixed? Or is a new iPod necessary??

If you live near an Apple store take it in for diagnosis. Don't forget to make an appointment online first. If you don't live near a store, you may get help by searching "youtube" for DFU Restore ipod. This is not difficult to do but it requires proper timing to get the device into DFU mode.

Win 7 PC freeze and block network access for other PC on same switch during windows update from WSUS

Hello,
It's been a problem for me for a long time now, but the last time (today) I found 3 PC on 2 different switches that block all the network on this 2 switches during the update.
I have a Domain with 80 PC with Win 7 (32&64bit) that takes the updates from the WSUS server that is configured on a Win2k8 r2. The system works well from 2 years from now but sometimes cause this errors that make me look like a dummy in front of angry
employees. If one of the PC get freeze , it will cause lost of connection on all the PC on same switch, and i have to find the blocked PC, remove from network, restart switch and hope that they will came back on.
Does anyone experienced this problem? Any help will be appreciated
Thank you!
List of updates for today below

Hi
Thanks for your response, yes I understand that the result is a Broadcast Storm and yes I have the cheapest switch on market :/.
The interest fact is that on one PC, I changed everything and keep only the old HDD and on last updates yesterday it was one of the blocked one too. So this make
me doubt that is something wrong in software on that PC. I don't have any third-part programs except browsers and all have Genuine Win7
The only investigation remained is what happens during the update process?
Is WSUS involved in something?
And another thing is the fact that some of the PC are cloned, but I have carefully changed the SID
Thank you for your support

HT201407 during a update of apple my iphone 3GS crashed an now the operating system wont load up..ive tried to reset the phone to the factory settings it took 4 hours an completed but my iphone still wont come on..what can i do to fix the problem? please

during a update of apple my iphone 3GS crashed an now the operating system wont load up..ive tried to reset the phone to the factory settings using itunes it took 4 hours and completed but my phone still wont come on..what can i do to fix the problem? please help #

In trying to include what information all that I could I should have specified I DON'T KNOW THAT IT WAS DEFINATELY JAILBROKEN when I took it to the apple store they told me there's no way for them to tell if it was jail broken or not. I'm only going by what ppl have told me COULD HAVE BEEN DONE TO THE PHONE. With that said the only thing I know for sure is that the apple tech at the Genius Bar told me that someone took control of my root menu in February & I've had no control of my phone since. I asked him how to regain control & how he knew his exact words were "oh that is out of our scope of capabilities here at this level & you would need an apple engineer to fix it". I said ok then how do I get an apple eng then? He laughed & said you can't!!!! To which I was furious I came home & called apple requesting to speak w/the fraud dept to file a report they said we don't have a fraud dept!! So after a 45 mn phone call again I left w/no answers.
@TJBUSMC1973-
I DON'T HAVE THOUSANDS OF DOLLARS TO SPEND HIRING AN ATTORNEY & Although I appreciate your suggestion I fail to how an attorney would be able to facilitate in any way since there's no suspect. I cannot prove that it's him doing it so I certainly can't pursue legal action w/no proof & no money. :'((
Again I thank you for your advice but I don't think that will help.
I was looking more for a TECHNICAL way to avoid this happening w/a new phone should I buy one or trying to get them out of my phone now! Such as installing some kind of software protection?? Someway to clear out the entire phone (other than factory reset which was done 10 x's w/no success, etc. if this person got in then there HAS TO BE A WAY OF GETTING HIM OUT, right????

Can I change mi Macbook pro 2012 to a new one, because my fan died during an update?

Well the other day I was using my Macbook Pro 2012 (not the retina) and I made an update soy leave my Mac during the update because I went downstairs for dinner, but when I went to se my Mac it make a strange sound on the fan, so I scared a lot and I download a program to see how my fan was doing and it sayed "0 rpm". My fan died during the update.
So my question is, Can I change my Mac to another one?

Welcome to Apple Support Communities
First, make a SMC reset > http://support.apple.com/kb/HT3964
If it doesn't work, the fan is defective. If you take the MacBook Pro to an Apple Store, Apple will try to repair the defective part, so you shouldn't need a new MacBook. However, if your MacBook Pro doesn't work correctly after replacing fans, Apple might give you a new Mac

In updating my iPod to 6.1.2, I received an error during the update. Now, ipod is not rebooting. Has screen showing usb to Itunes picture.   Turning off and back on it goes back to this picture. I don't know how to reset so that I can restore my backup

In updating my iPod to 6.1.2, I received an error during the update. Now, my ipod is not rebooting. It continues to display a screen showing usb to Itunes picture.   Turning off and back on, it goes back to this picture. I don't know how to reset so that I can restore from my backup.
A similar thing happened when I updated the ios on my ipad. But, I was able to reboot, and then restore from backup.   How can I get my ipod to reboot and allow restore when it is not even recognized as I reconnect to my computer?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My new ipad froze during software update thru itunes. The normal reset tructions do not work and itunes on my pc no longer recognizes my ipad. how do i get past this issue?

My new IPAD froze during software update thru itunes on my winows PC. The normal reset instructions holding the home and power buttons do not work. Itunes no longer recognizes my IPAD. What can i do?

See here -
Recovery Mode
http://support.apple.com/kb/HT1808
iPad not showing up in iTunes on a PC
http://www.apple.com/support/ipad/assistant/itunes/
iPad not showing up on a Mac
http://support.apple.com/kb/TS1591

During an update my iphone wiped all the music I had bought on itunes on my phone and i hadnt backed it up, how do i get those songs back?! help!!!

help! during an update it somehow went terribly wrong and restored my phone back to factory settings! I didnt lose my photos or contacts but have lost all the songs i bought via my itunes app! I admit I havent backed up recently, but how do i get those songs back?!

Contact iTunes support, plead your case, and request they add the lost music to your download queue. Be nice, as they are under no obligation to do so:
http://www.apple.com/support/itunes/contact.html

My ipod touch was interrupted during an update and now my itunes cant recognise the device, and ive tried to restore it but it just keeps coming up with the usb and itunes picture. how do i fix this? Please help

my ipod touch was interrupted during an update and now my itunes cant recognise the device, and ive tried to restore it but it just keeps coming up with the usb and itunes picture. how do i fix this? Please help

http://support.apple.com/kb/HT1808

My Apple TV stalled during an update and now just shows an image of it being plugged into a USB. It won't complete the update and does nothing when I plug it into my Mac via USB.

2 Apple TVs. The first won't reboot, it stalled during an update and now shows a picture of a UBS plug. Ive tried to plug into my computer, nothing happens. At a standtill.
The second Apple TV works but only if I send something via Airplay. The remote no longer has any affect. The light on the front of the Apple TV blinks when I push a buttom on the remote but nothing happens.
Any Ideas? I am starting to think I need to replace them. Thanks.

Ok, with itunes open on the pc, plug one end of the usb cord into the computer, but not connected to the ipad.
now, press the power button on the ipad until it turns off.
Then, press and hold the home button on the ipad at the same you plug the usb cord into the ipad. DON'T LET GO OF THE HOME BUTTON.
Keep holding the home button until you see the recovery mode message pop on the itunes window.
When that happens, you should now be able to restore.

Ok guys i need help my ipod touch froze during an update now i put it inot the recovery mode or dfu and it will not reset itself at all it comes up with an error code and says this ipod cannot reset now does anyone have any ideas of what to do with it

ok guys i need help anyone with my ipod it froze during an update now it will not work at all i ahve put it into the recovery mode or dfu and it will not reset it self it comes up with an error message 1603 the number is and says the ipod cannot be reset anyone please help me i have tryed everything googled you tubed everything

Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Error 1603
Follow the steps listed above for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts.

My iPad Mini iOS7 is showing only Apple Logo which happened during software update. I tried to restore using iTunes but it asking me to response from iPad. But my ipad only shows apple logo. How can i response? How to solve this problem?

My iPad Mini iOS7 is showing only Apple Logo which happened during software update. I tried to restore using iTunes but it asking me to response from iPad. But my ipad only shows apple logo. How can i response? How to solve this problem?

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

I downloaded the 4.0.1 and have had 10 updates so far. Firefox freezes up constantly and is now locking up during the updates. What the heck is going on?

I downloaded 4.0.1 Saturday and have had 10 updates so far, including 5 today. I am now up to 4.0.10.
Since I updated, Firefox keeps locking up while I am using it. It is now locking during the updates.
Why so many updates so soon.
What is wrong with Firefox and when am I going to be able to get on the web without locking up constantly?

I have Internet Explorer as well, but, It says I need Adobe to go to Facebook. When I try to download Adobe, I says IE must be my primary browser. I have no idea how to change, do you?
Firefox is especially bad at locking up when I am playing games. Have you had this problem?
I will switch immediately if I can figure out how.
Thanks so much for any help.

HT4623 During my update to the new operating system I am unable to get past Rescue EMail. I tried not putting in another e-mail as it says it is optional - that did nto work. I entered a Rescue E-Mail and it will not allow me to go to the next step. Help

During my update to the new operationg system I am unable to get past the Restore E-Mail. I first chose not to have an "optional" restore e-mail and was unable to get past this section. I then entered an alternate e-mail with the same results. I am unable to get past this section after I push the Next symbol. HELP!

I am having the same problem. I think I saw something about VPN and not being able to communicate with Apple web site. Do you have your protected company email on your phone?

Inconsistencies during role update

Similar Messages

Maybe you are looking for