Inconsistencies found when checking Multiprovider REFX_13

Hello,
this question is w.r.t the following thread which i had started previously....
error when trying to view Multiprovider contents
The Basis people implemented the above SAP Note and now when I try to check the contents of the Multiprovider, it gives me the following error message....
Inconsistencies found when checking Multiprovider REFX_13
Pls help.
SD

Yes, it was the first thing I tried.
Everything correct.
I have found that there is a RRI defined between a multiprovider and my ODS. Checking this multiprovider I get message "no inconsistencies" and a log with "inconsistencies found".
I don't find an explanation because it is contradictory. I have checked all infoobjects, assignments, and sources for multiprovider and I can't see any error. Also I can actívate it, still a log with inconsistencies appear but another message with "no inconsistencies found" is also shown.
Also I have marked flag to avoid checking relationship as error, but problem still arises.

Similar Messages

I can find many purchases in my purchase history, but they are not found when I "Check Available Downloads." How else can I download my purchases?

I can find many purchases in my purchase history, but they are not found when I "Check Available Downloads." How else can I download my purchases?

what happened to the initially downloaded files ? did you make a backup ? do you use time machine ?

HT1338 I have a Mac OS X 10.5.8 running verrry slowly. The HD still has 113.3 GB free. Could I need a Safari update or Flash update? No updates found when I check. ??Thanks.

I have a Mac OS X 10.5.8 running verrry slowly. The HD still has 113.3 GB free. Could I need a Safari update or Flash update? No updates found when I check. ??Thanks.

Is it slow with everything you do, or just with Safari?

No Data Found when Sum in Report is checked?

Does anyone have an Idea why ora-1403 error occurs when you select sum a numeric column in report? It goes away when I deselect it. I have run several reports and this is the first time I experienced this in version 2.0.

report error: ORA-01403: no data found when SUM columns
This person has the Error also, any suggestions?? A Bug??

Error when checking remodeling rule

I am trying to use remodeling to remove a characteristic (ZSORTDTL) from an infocube (ZLO_C01A). When I run a check on the remodeling rule it gives me the following errors:
Selection parameter is not a characterictic in InfoProvider "ZLO_C01A"
Inconsistencies were found when InfoCube ZLO_C01A was checked
Error while checking metadata
When I try to get more information on these messages they just give me message numbers: RSARCH162, R7I404, and RSCNV606, respectively. I can't find anywhere that refers to these messages. I get these errors in both our development and sandbox environment. I have created remodeling rules (even remodeling rules that delete characteristics) before and haven't run into this error. And, the cube is active and has this characteristic in a dimension table (ZLO_C01A5).
Any ideas on what is wrong here?

Poornima,
Follow this thread:
Error occurred during post handling RS_AFTER_IMPORT for UPDR L
Re: RS_UPDR_AFTER_IMPORT
Collect Objects seperatly for UR not bundled together.
~AK

Error 404: SRVE0190E: File not found when trying to access jsp

I am using RAD (new to web dev) for some reason my app is unable to find .jsp's when they are not in the web content folder. I have a predefined package for my jsp's and when I run my servlet I get
Error 404: SRVE0190E: File not found: /WEB-INF/classes/app/view/search.jsp
now if I amend my URL in the servlet to "/search.jsp" and move the jsp to the web content folder, it works. I just don't understand why it cannot find the file when I put it in the package I created and link to it, but finds it just fine in the webcontent folder. Is there some unwritten rule JSP's MUST be in the webcontent folder? Because when i do that, then I have issues with my image links for the GUI (get red X's for all my images regardless of the fact they are linked properly.) Basically if I put my jsps where I want, look fine in design and preview, but the jsp isnt found when executed, if I move them to the web content folder the images no longer work but the jsps run. I am getting rather frustrated. Any help is appreciated.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
See also:
*https://support.mozilla.org/kb/Clear+Recent+History
Are you using cleanup software like CCleaner or other software that may corrupt the cache?
You can try to delete the entire cache folder. 
You can find the location of the cache folder on the about:cache page (open via the location bar, like a web page).
You can check the browser.cache.disk.enable pref on the about:config page to verify that the disk cache is enabled (should be true).

Errors were found when compiling the workflow. The workflow files were saved but cannot be run.

Greetings All,
I am having issues with a SharePoint Designer workflow. This is a SharePoint 2013 environment, I'm using SharePoint Designer 2013 and working on a SharePoint 2010 workflow. I'm developing this as a SharePoint 2010 workflow because I need to do
impersonation.
The environment and workflow have been running, in the past week, without issue. I went to add a couple steps and now I cannot publish the workflow. While in SharePoint Designer, I receive the error:
"Errors were found when compiling the workflow. The workflow files were saved but cannot be run." When I click the Advanced button on the error dialog, the message is "Unexpected error on server associating the workflow."
That is all the error information I have available; nothing is in the log files.
I have investigated this error and tried the following:
Cleared the SharePoint Designer cache.
The WebApp.UserDefinedWorkflowMaximumComplexity was at 7000 so I increased it to 10000. Restarted the servers (which may not have been necessary) and tried again receiving the same error. I then increased it to 30000 with the same error result.
Since this is a large workflow, I tried created a workflow with a single action, write to workflow log, with the same error results.
I reboot the servers and try again and now I can publish the small test workflow but not the original. However, neither will run. When I attempt to manually run the small test workflow on an item, I get an error: "Sorry something went wrong.
An unexpected error occurs. I checked the log files for the correlation id and nothing, nothing was logged for the error. ~arg~
Also, now no workflows can be published in this web app. Not just the one I was working on but none of them!
Does anyone have a clue what has happened to the SharePoint 2010 workflow service? Or some suggestions for me to try?
Thank you in advance for your help!
Bob Mixon

try these links:
http://sp2013.pro/2013/04/solution-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run-cannot-set-unknown-member/
http://code2care.org/pages/sharepoint-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run/
http://sharepoint.stackexchange.com/questions/119909/sharepoint-designer-error-errors-were-found-when-compiling-the-workflow
http://stackoverflow.com/questions/26413125/errors-were-found-when-compiling-the-workflow-in-sharepoint-2013
Hi Sagar,
I appreciate it but if you see my original post, this is a SharePoint 2010 workflow that cannot be published; which has now caused all SharePoint 2010 workflows in the same web app to error.
Your first link is specific to SharePoint 2013 workflows.
Your second link refers to the UserDefinedWorkflowMaximumComplexity. If you read my original post, I've already tried this and I've tried to publish a small (single activity) workflow.
Your third link also refers to large workflows with many approval activities. My workflow doesn't contain any approval activities.
And you fourth link refers to 2013 workflows not 2010.
My issue is with publishing and running a SharePoint 2010 workflow in SharePoint 2013.
Thank you...

I get "disc burner or software not found" when I try to burn a playlist.

I am now getting "disc burner or software not found" when I try to burn a playlist from iTunes version 10.6.1.7 on Windows 7 PC. I've not added any new burner software or made any software changes of any kind. I have NERO 8 and I checked the "burn rights" is set for "everyone".
Is the any solution?
NASA_1967

Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

Errors were found when compiling workflow in SharePoint Designer 2010

Hello there,
I've run into a interesting issue in SharePoint Designer 2010 when publishing a workflow. I now get the below error
Normally when I get this message I simply clear the SharePoint Designer 2010 cache described in this
article, however, in this case the issue still continued. Hence I started the process of trial and error and quickly realized that the Update Item action was the culprit. In this action I am updating approximately 70 columns. Currently, I have two such
actions running in sequence. When I added the third Update Item action to do the same, I started getting this error.
Has anyone else experienced this before? In the workflow I am currently working on I am going to have to using the Update Item action several times and update approximately 70 columns hence I am open to other ideas to do the same.
Thanks in advance.

Hi Entan Ming,
Thanks for your reply, Hope you are aware that while we create any new workflow using SharePoint Designer 2013. There are two ways (We can say Platforms) to create the new workflow 1. SharePoint
2010 and 2. SharePoint 2013.
If I choose second one I. e SharePoint 2013, and try to create, save and publish workflow it`s working fine. But whenever I select option no. 1 i.e. SharePoint 2010 Platform to create
the workflow, I am able to Create it , save it , but while I try to publish it I got an error:
Errors were found when compiling the workflow. The workflow files were saved but cannot be run.
When I click on Advance I got message:
Unexpected error on server associating the workflow
My question is that, I am not able to publish any workflow in SharePoint 2010 Platform, using SharePoint Designer 2013.
Before publishing a workflow, I click on ‘Check for errors’ button, there was no any error found.
Thanks & Regards Mr. Bajirao Shinde

SSAS Cube - Throws "attribute key not found" when the key exists

Hi,
I created a cube with 2 fact tables ( CabecNF and ItensNF ) and with some dimensions, in this case Cliente.
When I proccess the cube it throws this error:
Internal error: The operation terminated unsuccessfully.
Errors in the OLAP storage engine: The process operation ended because the number of errors encountered during processing reached the defined limit of allowable errors for the operation.
Errors in the OLAP storage engine: An error occurred while processing the 'ITENSNF' partition of the 'ITENSNF' measure group for the 'SCA' cube from the SCA_Cube_ database.
Errors in the OLAP storage engine: The process operation ended because the number of errors encountered during processing reached the defined limit of allowable errors for the operation.
Server: The operation has been cancelled.
Errors in the OLAP storage engine: An error occurred while processing the 'CABECNF' partition of the 'CABECNF' measure group for the 'SCA' cube from the SCA_Cube_ database.
Errors in the OLAP storage engine: The attribute key cannot be found when processing: Table: 'dbo_CLIENTE', Column: 'CODIGO', Value: '6571'. The attribute is 'CLIENTEID'.
Errors in the OLAP storage engine: The attribute key was converted to an unknown member because the attribute key was not found. Attribute CLIENTEID of Dimension: CLIENTE from Database: SCA_Cube_, Cube: SCA, Measure Group: ITENSNF, Partition: ITENSNF, Record: 152957.
I understand that is not finding the ClienteID 6571. But I've checked on my database and he exists, and he has itens in the CabecNF wich has itens on ItensNF.
I've already customized the error configuration on the dimensions, but it didn't solve the problem.
What could be causing this behavior?
Thanks.

i did nt get what are trying say by this:
"First the Cliente dimension reported 500 rows skipped due to having the same name(even the name not being a key), so I changed the dimension and set the "name" property as not aggregable. Re-processed the dimension, and this time no skipped rows"
1.) were u able to do a full process of the dimension successfully?
if yes can you go and check the view or data source query that is making this dimension have the value for the column 'CODIGO' 6571
Yes, the process of the dimension was successful. At first successful with warnings, and then successful without warnings.
But I found the problem: The Cliente dimension has relathionship with the Seguimento dimension, and the Cliente 6571 had NULL at that relationship. I fixed that and the cube was processed successfully.
It was a bit hard to find the problem because the error didn't mentioned anything about the Seguimento dimension.
Thanks for all your help guys!

Errors in the OLAP storage engine: The attribute key cannot be found when processing

this is the absolute worst error message in all of computing. I despise it. Here is my situation.
SSAS 2008 R2.
I have one dimension. I have not even built my cube yet. only a dimension. I am trying to process it. I can process it when I only have a single attribute, they key. it is a composite key. When I add a new attribute (integer),
I get the error message. There are no null values. There are no blanks as its an integer.
The attribute key cannot be found where? I'm processing the dimension you idiot. there is not even a cube yet in order for any key to be found or not.

Hi Baracus,
According to your description, you get the error "Errors in the OLAP storage engine: The attribute key cannot be found when processing" when processing your cube, right?
Generally, the detail error message should like
Table: 'dbo_FactSales', Column: 'ProductID', Value: '1111'. The attribute is 'Product ID'
The above error explains that the fact table named "FactSales" contains column ProductID with value "1111" but the same ProductID is not present in your dimension table. There is a primary key - foreign key relationship exist
between the ProductID column of dimension table and fact table named "FactSales" and cube is unable to find ProductID with value 1111 in the dimension table.
At this time, what we need to do is to check either your dimension and fact table contains the value mentioned in the error message ( Value: '1111' in the above example). Here are some links about troubleshoot this issue, please see:
http://www.businessintelligence-solutions.com/ssas-typical-error-attribute-key-processing/
http://www.youtube.com/watch?v=5O7IAjvtAF4
If this is not what you want, please provide us more information about you issue, so that we can make further analysis.
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

Error 15401: Windows NT user or group not found. Check the name again

when adding a windows login on SQL SERVER 2008 R2 below error is throwing
Windows NT user or group 'domain\user' not found. Check the name again.
I have gone through the link
http://support.microsoft.com/kb/324321/en-us &
http://support.microsoft.com/kb/2770837
collation setting of the instance is not case sensitive.

Hi DevXYZ,
Have you checked the other possible reasons for this issue?
The login does not exist
Verify that the Windows login still exists in the domain. Your network administrator may have removed the Windows login for specific reasons, and you may not be able to grant that login access
to the SQL Server.
Verify that you are spelling the domain and login name correctly and that you are using the following format:
Domain\User
If the login exists, and it is correct, and you still receive the error, continue with the following sections in this article.
Duplicate security identifiers
In a Windows domain, unique Security Identifiers (SIDs) are automatically assigned to Windows logins in the domain. When you add a Windows login as a SQL Server login, the SID is stored in a system table in SQL Server. If you try to add a new login which has
the same SID as an existing SQL Server login, the 15401 error occurs.
Authentication failure
You might receive error 15401 when the domain controller for the domain where the login resides (the same or a different domain) is not available for some reason.
If the login is in a different domain than the SQL Server, verify that the correct trusts exist between the domains.
Verify that the domain controller of the login is accessible by using the
ping command from the computer that is running SQL Server. Check both the IP address and the name of the domain controller.
After you tried all the possible methods list above, you still receive the same error, please check the error log as Dean Savović mentioned above and share us the detailed error message here
as we can analysis further.
Thanks
Candy Zhou

BW: The following objects were not found when accessing server

Hi All,
Problem:
- on the infoprovider, no authorization object is flagged as authorization relevant
When trying to open the query in display mode, I get the message "The following objects were not found when accessing server", when I press cancel, the attributes are not available in the query.
I tested with authorization objects and the only way to get these attributes visible is to put them in an authorization object with full (*) authorization for the field.
Why does the system checks this? Because I don't want to give full authorization.
Is there a way to unable this check, as I want the attributes to be visible (also without the *)
+
When a query administrator with the sufficient authorization (sap_all or the * authorization for the field in the authorization object) is creating the query in query designer including the 'attributes' which are not visible with the 'normal' authorizations, the query will not list the columns in the output when it is executed by the normal user.
What can I do to get them visibIe in the output?
I can not create an authorization object for each of these attributes with * (full authorization)... as it is not logic, and no authorization should need to be checked...
Anyone who faced the same problem?
(>> it seems the system acts as if the attributes are keyfigures, for which you need * authorization to be visisble)
The attributes are navigational attributes.
Thanks for your reply

Hi Shivraj,
BW 3.5 version
Thanks

No Midlet Suites Found. Check the URL to make sure it is correct

hi,
i am very much in need of solution so plz respond as early as possible
i am trying to simulate OTA provisioning through J2ME Wireless Toolkit for this i am using Apache HTTP Server Version 1.3
i placed the .jad files and .jar files in htdocs directory and i added the below two lines to httpd.config file
AddType text/vnd.sun.j2me.app-descriptor .jad
AddType application/java-archive .jar
i changed the MIDlet-Jar-URL property in .jad file to point to .jar file
i restarted the Apache server and started the toolkit when i pointed to the .jad the error i got is "No Midlet Suites Found. Check the URL to make sure it is correct"
can any one help me out in finding what i missed in the process of installing the midlet suite through OTA provisioning in the toolkit

try adding these lines in the configuration file as applicable to your server
<mime-mapping>
<extension>jar</extension>
<mime-type>application/java-archive</mime-type>
</mime-mapping>
<mime-mapping>
<extension>jad</extension>
<mime-type>text/vnd.sun.j2me.app-descriptor</mime-type>
</mime-mapping>
Also, check if your JAD file contains the following information
MIDlet-Jar-URL: http://<server_ip_or_name>:<port_if_other_than_80>/<context_root>/<name_of_your_file.jar>

Errors were found when compiling the workflow

My company has consolodated many SharePoint sites into one with many subsites to save money. I ported my existing libraries from theold site to the new site (Same version of SP). The workflows did not go with the libraries, as expected. I re-created each
workflow, and every time have gotten the same error message: "Errors were found when compiling the workflow. The workflow files were saved but cannot run."
When I click Advanced I see some variation of the following:
(-1, -1) Compilation failed. Could not find file 'C:\Users\TEMP.*domain*\AppData\Local\Temp\ **and then a different .dll file every time'
I have not seen any other examples of this online. For some, creating a new task and history list for the workflow allowed it to compile, but not always.

Hi,
According to your post, my understanding is that Errors are found when compiling the workflow.
I recommend that you can check whether the file exists under the path 'C:\Users\TEMP.*domain*\AppData\Local\Temp\”.
If it exists, you can create a silmple workflow to check whether it works.
If it does work, you can add executionTimeout property in web.config file to increase the timeout interval(Make a copy of the web.config file before editing anything).
For more information, please refer to:
Manjuke's Blog: Fixed: SharePoint Designer Error - Unexpected error on server associating the workflow
SharePoint Designer 2010 Errors were found when compiling the workflow. The workflow files were saved but cannot be run. Unexpected error on server associating the workflow.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Inconsistencies found when checking Multiprovider REFX_13

Similar Messages

Maybe you are looking for