Inconsistencies in P_ORGIN for Transaction code PU00
Hello Gurus,
I am getiing a inconsistancy error in the auth object P_ORGIN when I try to add a tcode PU00 and while going into the authorization tab.
I understand that this need's to be corrected in SU24 for the tcode PU00 and deleting the proposed values and saving the settings then modifying the role and then changing back to the previous authorization values. I checked that the tcode PU00 has these values currently.
P_ORGIN AUTHC M
P_ORGIN AUTHC R
P_ORGIN AUTHC W
P_ORGIN INFTY
P_ORGIN PERSA $PERSA
P_ORGIN PERSG
P_ORGIN PERSK
P_ORGIN SUBTY
P_ORGIN VDSK1 $VDSK1
Please let me know if I need to delete all these values then save the settings and then modify the role. I see that it prompts a workbench request for this changes.
Regard's,
Salman
Hi Salman
Yes, you would need to delete the objcet P_ORGIN and add it back with the same values as listed. It will promt you to create a workbench request. Once changes are done you can go to the role in transaction PFCG and authorization tab go to "Expert mode for Profile Generation" and check on "Read old status and merge with new data" to import the changes in the role.
Once the changes are done in the role, generate the role.
Thanks.
Anjan
Similar Messages
-
Creating of Notes for Transaction Code RECN(Using Classes and Methods)
Hi Experts,
I want to Create Notes for Transaction Code RECN, This should not done manually but should be done programatically.
I had used the Class CL_GOS_SRV_NOTE_CREATE to create the notes.....but here comes the doubt for me.....note will be created by using this class and how this can be created for the Tcode RECN........
I am using the Real Estate Module.....Plz help me....awaiting for ur helpful answers....
Thanks in Advance.....!
BrahmaHi kanagaraja,
Thanks...!
The BADI which u have given is not existing in my system...i had gone through the se18 and se19 tcodes....
Awaiting for ur response......!
Thanks,
Brahma... -
LSMW for Transaction Code FB41
Hi,
Can any one let me know LSMW - direct input method or BAPI (Bussiness Object) to update data using transaction code FB41.
I have used direct input method RFBIBL00, but this standard direct input method is not supported for transaction code FB41.
Thanks and Regards,
Shravan G.BAPIs for FB41:
BAPI_ACC_DOCUMENT_POST
BAPI_ACC_INVOICE_RECEIPT_POST,
BAPI_ACC_GL_POSTING_POST,
BAPI_ACC_DOCUMENT_POST.
Regards,
Nagraj -
For transaction code MD61, I want to upload data using BAPI
Hi,
for transaction code MD61, I want to upload data using BAPI.
Which BAPi I ll call ?
Can anyone suggest me how to do it with any simple example program ?Refer the thread for details about coding-
BAPI_REQUIREMENTS_CREATE
Reards,
Amit -
Writing a Batch Input or Call Transaction program for transaction code MMAM
Hi All,
I'm writing a Batch Input or Call Transaction program for transaction code MMAM (Changing Material Type). The program was able to run but somehow I was not able to capture the log of the output after running MMAM. The log was not part of the SY-MESSAGE so adding in MESSTAB into call transaction doesn't help while BDC session logs shows only the transaction was processed.
Anyone has encounter such problems before?
Regards,
Ramu.Hi
Overview of Batch Input Session
The first batch input method is to create a batch input session. It is the processing of this batch input session that updates the database, not the execution of the batch input program. i am giving you example for Change Vendor you practice for ur tcode
For our example, we will use the Change Vendor transaction (FK02) to add a street address to an already existing vendor.
Step #1
Use SystemStatus menu path to determine online program name (SAPMF02K), screen number (0110)
Step #2
Use F1 key and Technical Info pushbutton in each screen field to be filled to determine the field name.
Step #3
Determine how to proceed in the transaction
(save the record by clicking on the Save pushbutton or pressing the F11 key).
The process flow of CALL TRANSACTION
A program that uses CALL TRANSACTION USING to process legacy data should execute thefollowing steps:
Prepare a BDCDATA structure for the transaction that you wish to run.
Prepare a internal table to store error messages Tab_Mess like structure of BDCMSGCOLL.
With a CALL TRANSACTION USING statement, call the transaction and prepare the BDCDATA structure. For example:
CALL TRANSACTION MM01' USING BDCDATA MODE 'A' UPDATE 'S'. MESSAGES INTO TAB_MESS.
IF SY-SUBRC <> 0.
<Error_handling>.
ENDIF.
Overview of Batch Input Session
The first batch input method is to create a batch input session. It is the processing of this batch input session that updates the database, not the execution of the batch input program -
BAPI for Transaction Codes FMV1 and FMZ1
hi,
is there any bapi for transaction codes FMV1 and FMZ1?!
please advice!
thanks JEHI,
For FMZ1
use this
FMFR_CREATE_FROM_DATA
FMFR_CHANGE_FROM_DATA
FMFR_CHANGE_COMPLETION_FLAG
Regards
Hiren K.Chitalia -
Unrestricted access for transaction codes
Hi,
We had set Production Client settings in SCC4 as "No chnages allowed"
for client specific objects and
"No changes to cross client & repository objects" in cross-client
settings.
As a part of regular job Finance users needs access to below
transaction codes when the client is in non modifible Mode.
I would like to give access to below listed transcation codes for
selected users Without opening client everytime , I have assigned
SAP_ALL profile for two users but still they are not able to perform
their activity using below transcation codes when the client
is "Nonmodifiable" state
Transaction Codes List :
S_BCE_68000174 - Enter Translation Rates
S_ALR_87003642 - Open and Close Posting Periods
S_ALR_87002510 - Enter Time Interest Terms
S_ALR_87002678 - Enter Referance Interest Values
FTXP - Tax Codes
Please suggest us how to provide full (display, create, change,
generate) access to specific listed users for specific transcation
codes when production client is in "Nonmodifiable" & No changes allowed
mode.
ThankuHello,
Usually it depends on some points of customizing, that allow you to choose how SAP treats those transactions. I mean, you can choose if they should be treated as business transactions or customizing. In your case, the application is configured to use those transactions as customizing. Depending on the business area, you have to ask OSS support to change the configuration of these transactions.
Hope it helps
Best Regards
Francisco -
How to create varient for transaction code
hello expert,
I created one Mod. pool program and transaction code.
while run this tcode, Save button is disable and unable to create varient.
could you please guide me hw to enable this save button and create varient. please
with best regards
srinivasHi,
You can create variants for transaction using transaction variants. That is meant to simplify these kinda scenarios.
The tcode for transaction variants is SHD0. You can create variants as you wish. It is simple only. No coding required. Just take SHD0. Give your transaction name.
Then press create variant.
It will guide you.
Regards,
Renjith Michael. -
User exit for transaction code MIGO (Goods Receipt)
Hi Team,
Please let me know the <b>name of the user exit</b> for adding a new field in transaction code <b>MIGO</b> (The field is Freight charges ) at header level.
Would be suitably rewarded.
Regards
Badarihi,
Transaction Code - MIGO Goods movement
Exit Name Description
MBCF0002 Customer function exit: Segment text in material doc. item
MBCF0005 Material document item for goods receipt/issue slip
MBCF0006 Customer function for WBS element
MBCF0007 Customer function exit: Updating a reservation
MBCF0009 Filling the storage location field
MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0011 Read from RESB and RKPF for print list in MB26
MB_CF001 Customer Function Exit in the Case of Updating a Mat. Doc.
Cheers
Alfred -
Table for transaction code for creation of process order
Hi Gurus,
Please tell me, in which table i can see the transaction code used to create process order.
regards
KaisarHi,
Table for transactions is TSTC.
If your looking for t-code for process order - COR1.
Regards,
Vivek -
Hi,
I have a task here that needs to send external email to the employee's manager whenever the approver set the status from 'released for approval' to 'approve'.
which is status 20 to 30 in CATSDB-STATUS thru transaction code CAT4 or
CATS_APPR_LITE.
Can anyone give some help here?
Thanks in advance.Hi,
there are mainly three ways to trigger a workflow:
- linked to a change document, because in standard function module to write change documents a trigger for a workflow is pre-designed. With workflow-customizing you can activate an active trigger.
- linked to output messages. There is a medium 9, which is the workflow trigger.
- linked to status changes. Maybe not all status change functions include a pre-designed workflow trigger, but at least for status in table JEST it should be possible to make workflow-customizing to activate a trigger.
- 'manually' with a function module SWE_EVENT_CREATE.
It's also possible to define filters (e.g. only status = approved), so your example was perfectly fitting workflow possibilities. If no other option is fitting, have a look at above mentioned exit.
Then you still have the question, should you try to define a workflow or just create a mail by FM. There I can't help you, this depends more on your skills and time.
Regards,
Christian -
Field for transaction code description ?
Hello,
I know that the T-code is stored in table BKPF, but what is the table where the transaction code DESCRIPTION is stored ?
Thanks,
Julienjulien,
tcodes are not stored in BKPF.
they are stored in TSTC ->tcodes and TSTCT ->text for tcodes.
and BKPF might be storing the tcode in some field which stores the value of tcode from which the document is being created. but that is not the table which stores TCodes.
hope this helps -
USer exit for transaction Code APPCHANGE
I want to include a function module to trigger a workflow
in a user exit related to program
SAPLHRHAP_UI_DOCUMENT_REPORT (transaction Code APPCHANGE.)
The workflow will be triggered when SAVE button is pressed.
Thank your for your helpHere is a program that can be used to find user exits per transaction code.
report z_find_user_exit no standard page heading.
tables: tstc, tadir, modsapt, modact,
trdir, tfdir, enlfdir, tstct.
data : jtab like tadir occurs 0 with header line.
data : hotspot(30).
parameters : p_tcode like tstc-tcode obligatory.
at line-selection.
get cursor field hotspot.
check hotspot(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
start-of-selection.
perform get_data.
perform write_list.
* FORM get_data *
form get_data.
select single * from tstc
where tcode eq p_tcode.
check sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = tadir-devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
endform.
* FORM write_list *
form write_list.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
endform.
Regards,
Rich Heilman -
Set Default value for transaction code F-36
Hi
I need to set default value to feild special G/L indicator in transaction code F-36 How can I do that. Please advice.
Regards
KesharikaJust in case anyone would need to know. You can change the default values for transactions by using SE93.
Regards, -
Authorization access Issue for Transaction Codes PA10 to PA40
Hi Experts,
I have created Custom role for accessing ALL HR Transaction codes in IDES System and added to the user & Tested.
All transactions codes are working fine except PA10,PA20,PA30 &PA40
We have new installation of ECC6.0 (HR) IDES System.
I am new to HR Security.
Here anything needs to configure in HR System for accessing transaction code PA10 to PA40.
Please help me regading this.
Advance Thanks,
BBCI have checked in SM01, Transaction codes PA10 to PA40 are not locked.
We are facing two issues
1) when accessing T- Codes PA10 to PA40, System showing message: You are not authorized to use Transaction code.
Thatz the reason i suggested you to check with basis consultant. Becuas he is the power user he can only see that from his window all the autharizations
May be you checked from your user your user might have autharization. that user might be end user who getting msg might not have authorizatoins.
2) function module : HR_READ_INFOTYPE.
When Debuging this, It calls internal FM
HR_CHECK_AUTHORITY_INFTY and returns exception
no_authorization=1
See this means that that user have NO autharizatoins
Best Regards
Maybe you are looking for
-
Oracle 8.0.6.1.0 and PHP 5.2.17
Hi all I need help, I've this enviroment: Dedicated Server: Oracle Version: 8.0.6.1.0 OS: UNIXware 6 Web Server (Windows 7): Oracle Client Version: 9.2 Oracle Instant Client: 10.1.0.5 (OCI Version: 1.2.5 Rev: 293036) Apache 2.2 PHP 5.2.17 (OCI librar
-
Illustrator 64-bit CC Install Problem - error 1603
I am trying to install Illustrator 64 bit that was packaged using CCP on a 64-bit Windows 7 machine. It installed OK on a test machine however it does not install on a machine that has existing CC apps on it. The error code is 1603 with no extra desc
-
Photoshop CS quitting unexpectedly
Usually happens when loading a file. Today, the file size was about 100mb. It has happened with far smaller files as well. Error message is that it can't load the color book because there is not enough RAM. I'm running a dual 2gig G5 with OSX 10.4.3
-
Settle PP Orders to SD Order items using KO8G in a MTO Scenario
Hi I've set a Make_to_Order scenario for a company. I need to settle the cost collected onto PP Order to the relative Sales Order Item. When I use the KO88 transaction, i can settle a single PP order without problems, but when I try to use the KO8G t
-
After uploading video it develops a stutter
After I have processed my movie and checked it I upload it to iCloud and it develops a stutter and becomes jumpy and unwatchable. The same thing happens if I upload the video to YouTube. It is not so bad when I share it to iTunes. I use a Panasonic a