Inconsistency between R3 and APO. - not getting reconciled in CCR or CPP.

Hi,
We have a PO that is not getting reconciled in CCR and CPP.
it give the message
Unit of conversion from H to KG for the Product "ABCD"  is not possible.
this PO has 3 products and off which only one is not getting reconciled. rest two are showing correctly in APO and R3.
The conversion is not maintained in material master for the rest for the two products also....
i have a similar set up in my quality environment. i tired to change the PO with some qty and it refelcts in APO immediately..
Any idea on where the conversion is not happening correctly???
Thanks
Aswath

Hi,
Have u activated detailed application CIF log. Can you check the error details in APO using t-code /n/SAPAPO/C3 or in ECC using t-code CFG1.
Can you also try to send the queue using /n/SAPAPO/CPP. CCR will show no error only when there are no queues in SMQ1 or SMQ2 of both the systems and also no queue pending in postprocessing.
Best regards,
Vaibhav

Similar Messages

  • HT1203 i have tried this 6+ times to "How to share music between different accounts on a single computer" on my wifes mac and can not get it to work!! On my PC no problem but on the MAC it will not work, follow the instructions to the T but no go????

    i have tried this 6+ times to "How to share music between different accounts on a single computer" on my wifes mac and can not get it to work!! On my PC no problem but on the MAC it will not work, follow the instructions to the T but no go????

    It is almost as if the program does not exist on my computer. If I search for it, the only thing that comes up is the installer. I cannot find it anywhere despite the fact I have installed it numerous times, uninstalled it and conducted a fresh install, and the Adobe website checks says that it is installed.

  • Inconsistency between tbtco and tbtcs

    Hello guys,
    we have a big problem after our HWU upgrade.
    We have copied the content of tbtco into a new table tbtco_copy before the upgrade to save all the job entries.
    After this we have deleted the contant of tbtco. So we had no scheduled jobs for the HWU
    After the HWU we have copied back the content of tbtco_copy into tbtco.
    But now we have a inconsistency between tbtco and tbtcs. This means that all planed and released jobs are not starting (delay goes up).
    How we can start this jobs << Removed >>
    Br
    Christian
    Edited by: Rob Burbank on Apr 19, 2009 4:23 PM

    USer TR: SM65

  • APO/BW: Verifying/Establishing a connection between BW and APO

    Hi
    1. Is there a way to see that my BW system is connected to an APO system, other than finding a name with “APO” in it under the Source System tree in BW?
    2. Also, if the connection does NOT exist between BW and APO, can you provide me with the steps on how do I establish such a connection?
    3. Does a successful  in “Generate Export DataSource” in BW indicate that my BW system is connected to APO DP?
    Thanks

    . Is there a way to see that my BW system is connected to an APO system, other than finding a name with “APO” in it under the Source System tree in BW?
    In source system tree, you will find all the systems that are connected to your BW system. The system name need not have to start with APO.
    2. Also, if the connection does NOT exist between BW and APO, can you provide me with the steps on how do I establish such a connection?
    Transaction Sm59. you need to know the source and destination IP adresses. Usually, the baais will take care of connections.
    3. Does a successful in “Generate Export DataSource” in BW indicate that my BW system is connected to APO DP?
    NO. Export generaion is within BW system; nothing to do with the APO system that is connected.
    Ravi Thothadri

  • Withdrawal Qty don't match between ECC and APO

    Hi Experts.
    I am facing a discrepancy for Withdrawal Qty between ECC and APO before delivery/PGI creation.
    In ECC T.code MD63 I am able to see the withdrawal Qty as expected but in APO a duplicated withdrawal Qty is being created. But this is not happening for all materials, only some specifics materials. I did a check in Material Master data and I have no found any difference between a material that is working and one that is not working...
    Can please somebody explain me why APO is dobling the Withdrawal Qty.
    Thanks a Lot
    Daniel Campos.

    Please check wthether you have dp index duplication in this problem.
    Please follow the process.
    For this process , you need to follow these steps .
    1. From the table /SAPAPO/MATKEY , find the product id of the product for which you feel there is problem .
    2. Find the location id from table /SAPAPO/LOC for the location.
    3. Use the above found 'product id' and 'location id' to find the dp index in table "/SAPAPO/DP_HEAD "  .
    Enter the planning version ' 000 ' in this table . If there is some error you will find multiple entries of the 'dp index ' in this table for the ' 000 ' planning version. If error found use below program to delete the dp index .
    4.  Precaution should be taken before we delete the 'Dp Index' as the consumption history is lost due to this .          In the program  'Z_DEL_WITHDRAWL'  there are 2 check boxes " update " and " list ". List will show the DP index and update will delete it. Need to extremely careful in this program as wrong selection will cause problem .

  • Buy chips pokerist were withdrawn money from a bank and did not get what happened chips

    Buy chips pokerist were withdrawn money from a bank and did not get what happened chips
    <Personal Information Edited By Host>

    Provide this information to the program developer using the "Report a Problem" link.  This transaction is between you and KAMAGAMES LTD.

  • HT4759 Please I need a help I cannot backup my ipad and can not get into the icloud storage.  What would I do to get into my ipad?  please I need your help

    Please I need a help.  I cannot backup my ipad and can not get into the iclous storage to delet them, because its read icloud storage is full.  Please do you have a knowledge of how I can get rid of the message and get into the ipad?

    Welcome to the Apple Community.
    You might try a forced shutdown to begin with, hold down the top and home buttons together until the device shuts down, then restart it.

  • I updated from windows xp to windows 7 and can not get into my itunes account.  I get the notice that I am only allowed 5 devices and this isn't a new device just an updated one.  How do I get to my itunes?

    I updated from windows xp to windows 7 and can not get into my itunes account.  I get the notice that I am only allowed 5 devices and this isn't a new device just an updated one.  How do I get to my itunes?

    Take a look at Apple's document for authorizations -> iTunes Store: About authorization and deauthorization.
    You can deauthorize all computers from iTunes. All you have to do is click iTunes Store, click your account name in the upper right corner of iTunes, then deauthorize all.

  • Hi!  I have to update the iPad, and do not get it!

    hi! I want to buy about 20€ in apps (keynote, pages, numbers) but for this, I have to update the iPad, and do not get it! in the service have told me that I have to install the update on the Mac lion! you serious!??

    If you have iOS 5 already installed on your iPad then you don't need to update the iPad - if you are on iOS 4 or lower then you will need to update if you want those apps as they now have iOS 5 as a requirement.
    If you have a Mac then in order to update to iOS 5 you will need iTunes 10.5+ and Mac OS X10.5.8 or higher. If you have a PC then you will iTunes 10.5+ and Windows 7, Vista or XP Home or Professional with Service Pack 3 or later.

  • I have an ipod nano 7th generation and can not get it recognised by my Windows 8.1 laptop (it appears briefly on My computer, then disappears). This happened after I updated iTunes to the latest version. Does that have something to do with it?

    I have an ipod nano 7th generation and can not get it recognised by my Windows 8.1 laptop (it appears briefly on My computer, then disappears). This happened after I updated iTunes to the latest version. Does that have something to do with it?

    Hello there, kiwilucea.
    The following Knowledge Base article offers up some in-depth steps for troubleshooting your issue:
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Keep in mind if you get to Step 12 Reinstall iTunes, those steps need to be followed exactly as outlined for the reinstall to be effective.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I have Windows XP 32 bit and can not get Adobe flash player to load!!! Do not know what version I ha

    I have
    Windows XP, 32 bit and can not get the flash player to load
    . Do not know what version I had to start with. When I
    try to load the 10.3 version it gets to 50% then tells me
    to close the Internet explorer and bartshel!
    If i do this then there is nothing left to load.
    I tried to save it to my desktop but then itt says no active thread foun
    d. How do I load it without my Internet being open and a
    dobe site up and running when it tells me to close them?

    Thanks the address you gave me gave me what I needed but still had alot of trouble with the game. Come to find out it was my browser IE8 that was causing all the problem. So I changed to google chrome and loaded the regular version of Flash player and have been able to get on the game. Now i have trouble with my plugins can you send me a link to find Adobe flash player plugin 9.0.124.0?
    Date: Tue, 6 Sep 2011 19:39:16 -0600
    From: [email protected]
    To: [email protected]
    Subject: I have Windows XP 32 bit and can not get Adobe flash player to load!!! Do not know what version I ha
    Hi,
    Could you download the appropriate version of the installer from the following page?
    http://forums.adobe.com/thread/889580?tstart=0
    Once downloaded, please quit all of your browsers and launch the installer.  If it still fails, please restart your system and try again.  Let me know how it goes.
    Thanks,
    Chris
    >

  • How can I get itunes to download on my PC. I just got an ipod classic for Christmas and can not get Itunes to download. Website goes to downloaded page but i never get a downloading popup. I even turned off my popup blocker.

    How can I get itunes to download on my PC. I just got an ipod classic for Christmas and can not get Itunes to download. Website goes to downloaded page but i never get a downloading popup. I even turned off my popup blocker.

    Make an appointment at the genius bar.
    If you went without an appointment, then it would make sense that you could be turned away.

  • Running snow leopard on MBP and am not getting an sound alerts for Mail or Calendar; Have checked all setting in sound in the system preferences

    Running snow leopard on MBP and am not getting an sound alerts for Mail or Calendar; Have checked all setting in sound in the system preferences

    Hi..
    For Mail, from your Mail menu bar (top of your screen) click Mail > Preferences then select the General tab.
    Click the pop up menu to the right of New messages sound to make a selection.

  • I just bought the BDP-S1500 yesterday and can not get it to work via wireless

    I just bought the BDP-S1500 yesterday and can not get it to work via wireless????

    Hi BigDaddy317,
    Please the link below for further assistance in connecting your wireless device to the internet.
    https://us.en.kb.sony.com/app/answers/detail/a_id/33377/p/47329,47564,95482/c/65,66/kw/internet
    https://us.en.kb.sony.com/app/answers/detail/a_id/35983/p/47329%2C47564%2C95482/c/65%2C66/kw/internet
    Please let us know if you're getting the same result or the error messages that you see.
    Thanks,
    >Joffrey
    If my post answers your question, please mark it as "Accept as Solution"

  • What is the difference between != and Logical NOT operator

    kindly,tell me what is the difference between Not Equality operator and logical negation operator.
    Edited by: user13414134 on Dec 3, 2010 8:59 AM

    what is the difference between != and Logical NOT operator The NOT operator is transformed into the inequality operator (&lt;>), as can be seen from the Predicate Information of the explain plan:
    SQL> explain plan for select * from dual where  :x != :y
    Explain complete.
    SQL> select * from table(dbms_xplan.display())
    PLAN_TABLE_OUTPUT                                                              
    Plan hash value: 3752461848                                                    
    | Id  | Operation          | Name | Rows  | Bytes | Cost (%CPU)| Time     |    
    |   0 | SELECT STATEMENT   |      |     1 |     2 |     2   (0)| 00:00:01 |    
    |*  1 |  FILTER            |      |       |       |            |          |    
    |   2 |   TABLE ACCESS FULL| DUAL |     1 |     2 |     2   (0)| 00:00:01 |    
    Predicate Information (identified by operation id):                            
       1 - filter(:Y&lt;>:X)                                                          
    14 rows selected.
    SQL> explain plan for select * from dual where not :x = :y
    Explain complete.
    SQL> select * from table(dbms_xplan.display())
    PLAN_TABLE_OUTPUT                                                              
    Plan hash value: 3752461848                                                    
    | Id  | Operation          | Name | Rows  | Bytes | Cost (%CPU)| Time     |    
    |   0 | SELECT STATEMENT   |      |     1 |     2 |     2   (0)| 00:00:01 |    
    |*  1 |  FILTER            |      |       |       |            |          |    
    |   2 |   TABLE ACCESS FULL| DUAL |     1 |     2 |     2   (0)| 00:00:01 |    
    Predicate Information (identified by operation id):                            
       1 - filter(:Y&lt;>:X)                                                          
    14 rows selected.

Maybe you are looking for

  • Changes via SM30 of ztable is not reflected after saving...

    Hello experts, I am trying to modify a z table because the users told me that when they try to modify it using its maintenance view their changes is not being saved. Now, I checked the table and it has 3 fields(excluding MANDT) and I found out all of

  • Add ejb.jar as a module into ear using jdeveloper

    hi all, i have problem with ejb.jar file. i want to add one ejb.jar module into jdeveloper application. I means i want to add into ear as dependencies. right now, I can only add jpr project as dependencies. Unfortunately my ejb.jar dont have source f

  • Depot Repair Order Flexibility after SO created

    Hi everyone, I have a client who's looking into using the Depot Repair functionality to handle all returns.  What we're finding so far is that everything works well so long as you know what you're going to do with the material before you create the s

  • Java pdf-library

    Hi everybody! I am looking for a free library for Java for interaction with pdf-files. My goal is to create an image-file (jpeg, bmp or gif, ...) from an exisiting pdf file, in particular from the first page, ... Any ideas? Thx in Advance! StrongStev

  • BBM Restore via Email not working

    I have a 9930 on verizon, and have previously backed up my bbm contacts to my email address that I have also setup on my new blackberry. I try to restore bbm contacts via email, i click confirm to send an email, but then it says "The verification ema