Inconsistency in IW8W transaction - Refurbishment goods receipt

Hi All,
I have a problem which is as follwos:
Refurbishment order (order type PM04) was created for a material with target quantity, say 10 EA.
Due to change in priorities, goods issue (MB1A) for that material was done only for quantity, say 5 EA.
Order was processed and when the material is returned to stores by using IW8W transaction for that refurbishment order after refurbishment, the system automatically proposes the quantity that was entered as target quantity during maintenance order creation (say qty : 10 EA).
To circumvent this problem, I have maintained the over delivery tolerance as 1% in work scheduling view in the material master. I have used T. code MB31 for doing the goods receipt. Still the quantity proposed by the system is the target qty that was entered during order creation. Here the system does not allow more than 1% of the qty proposed by the system (i.e: qty 10 EA).
Automatic proposal of target qty during goods receipt, causes incorrect entries being posted in system, i.e: say if qty 10EA that was automatically proposed is posted system accepts the entry and creates the document.
In material stock overview, the qty of C3 val. type material was reduced by 5 EA; whereas the qty of C2 val. type material was increased by 10 EA.
This is incorrect posting apart from incorrect proposal qty in goods receipt transaction by the system.
There seems to be an error in system design. The system should automatically propose the qty that was issued through goods issue and also should not allow more than the qty issued. Less qty is acceptable. Automatic proposal of target qty is incorrect.
Kindly furnish solution so as to overcome this issue.
Thanks in advance and with best regards.
Kannan J

hi kannan
i also checked it is behaving as you said only, i think you can have control by consulting MM perople. since the movment will allow unplanned material.i thnik there will be some settings for the movment type which will not allow unplaned material to be posted.in maintenance order if you check carefully suppose you have made the reservation for 5 material and taken only 2 materials,if you try to post 261 then the system will propse the remaining qty only say 3 materials, whereas if you want to reserve the taken 2 qty, the system will not propose the 2 quantity you can specify whatever qty in this field still the system will accept and post the goods receipt.
regards
thyagarajan

Similar Messages

Print programs for Goods Receipt, GI, ST, Subcont. TP, Consignment TP ...

Hello Gurus,
There is a Business requirement to have a separate print forms for every Inventory transactions like Goods Receipt, Goods Issue, Stock Transfer, Sub-Contracting Transfer Posting, Consignment Transfer Posting, etc.
We need to use the Transaction MB90 to print all the Inventory documents.
While checking the Output types, we find that basically WE03 is for Goods Receipt (Collective Slips) & WA03 is for Goods Issue / Transfer postings (Collective Slip)
I would like to know that inorder to assign a different Smart Form & Program (One for each of the transactions listed above) to the output types, is there a way around to work with these 2 Output types & have the 5 different Smart Forms - Programs assigned to these 2 Output types or do I need to create a copy of these output types & use them instead, one output type for each Smart form - Print program combination
Regards,
Zafar.

First, you can maintain PRINT ID in the IMG for each movement type 
Second, you can create multiple OUTPUT TYPE - one for each.
Third, in MN21, create ouotput records using a combination of OUTPUT TYPE and PRINT ID
 
Example:
GR movement types 101, 105, etc, you can have PRINT ID 1 and OUTPUT TYPE Z001
GI movmeent types 201,261, etc. you can have PRINT ID 2 and OUTPUT TYPE Z002
 
Configure PRINT ID: IMG path: Materials Management > Inventory Management and Physical Inventory > Print Control 
Configure OUTPUT TYPE: IMG path: Materials Management > Inventory Management and Physical Inventory > Output Determination

Goods Receipt by delivery - RF LM71

Hi,
Hopefully a very simple question.
Within the RF transaction Lm71 (Goods receipt for delivery) I only want to generate transfer orders for those materials that have been selected. At present transfer orders are generated whether the select flag has been set or not.
Is this select flag just an indication to the user that they have checked this material? Can we enforce that the check has been flagged to only generate transfer orders for those materials which have been checked?
Any guidence appreciated,
Thanks
Adam.

Hello,
Havent used LM71 as-is and hence cant comment on the select functionality. However, the other part should be achievable with the help of a developer. You could probably modify the code and put in a logic where in the TO item is only created for the "select " flagged items only. The developer should be able to help you here.
Im sure someone on the forum having experience with LM71 can share.
Thanks,

"Post Goods Receipt" is not allowed (HU 2023125)

HI,
I want to post goods receipt (VL32N) the batch with HU but there is a error log ""Post Goods Receipt" is not allowed (HU 2023125)
". Could any one tell me what happen and how to fix the error ?
Thank's & Regards,
Saiful arif

Hi!
I have the same problem, but in my case it is because I have one HU with 2 subordinated HU. I have created the OT for the main HU, and when I try to post good receipt, It show me this error:
"Post Goods Receipt" is not allowed (HU 362640)
Message no. BS007
Diagnosis
The current status of object 'HU 362640' prohibits business transaction
    'Post Goods Receipt'.
Procedure
To process business transaction 'Post Goods Receipt', you first have to
    change the status of object 'HU 362640' to allow the transaction 'Post
    Goods Receipt'.
This gives you an overview of the system and user statuses that affect
    the transaction. A transaction can only be executed if there is at least
    one status that allows it and there is no status that forbids it.
Transaction analysis"
Please, do you know what can I do???
I can't chage the HU subordinated status, how can I do that???
Thanks a lot!

Transaction BORGR: No tolerance on goods receipt for Kanban calloff

Hello,
we have the following situation:
- MM scheduling agreement with tolerance of 10% for under and overdelivery, production supply "summarized JIT call" is set.
- KANBAN cycle has 1 empty container with a summarized JIT call for replenishment, quantity 10 pieces.
- ASN has been created with BORGR transaction, it contains: 1 line item for the material with delivery quantity 9 pieces, assigned to this line item is the JIT call with notified quantity 9 pieces as well.
My expectation was that the JIT call can be booked with 9 pieces as it is inside the 10% tolerance defined for the scheduling agreement. In addition, I expected the KANBAN container be set to full.
Instead, the following error message is given:
'Post GR' carried out without success
(Message no. BORGR215)
Because of previous error, dispatching is not possible for ID 0180573431
(Message no. /SPE/ID_HANDLING011)
Inbound Delivery 0180573431 00010
(Message no. BORGR210)
Total of the summarized JIT calls does not match the current delivery qty
(Message no. BORGR540)
Changing the delivery quantity and the notified JIT quantity to 10 pieces, the goods receipt is booked correctly.
I only found the following notes that deal with tolerances but they are outdated, as we are using DIMP release 603:
https://service.sap.com/sap/support/notes/393421
https://service.sap.com/sap/support/notes/508215
Has anybody faced a similar problem or can help me with this?
Thanks!

Hello Jiaul,
Sorry I may have mislead you. The actual error message is "Goods Receipt for Production Order XXXX can only be made on 2010.08.25 to 2010.08.27". These two dates are the Start Date and FInish Date for the Production Order in CO03,
The Basic Start Date for the current Production Order is 2010.08.25
The Basic Finish Date for the current Production Order is 2010.08.27
I think what it means is that you can only Post Goods Receipt for the Production Order only after the Basic Start Date of the Production Order. Do you know where I can find the configuration for this message?
Thanks

Should the Goods Receipt Inventory Transaction include Item Cost selection?

When processing a Goods Receipt inventory transaction, the Price List pull down does not display "Item Cost" as a selection.
The user can make the Unit Price field visible and active, compare the cost displayed from the Price List selected to the current Item cost and update if different. This forces the user to be very cost cognizant as none of the price lists available are guaranteed to be equal to the current item cost.
Update of the record can cause a cost revaluation in moving average or a cost varinance account adjustment in a standard cost system.
The companies I have talked to would prefer to select Item Cost in the price list field as they can do in the Stock Posting.
I am looking for further input on this.
Thanks,
Jim

No replies since April 2009, closing.

Classical Report for linking/applying the goods receipts transaction

Classical Report for linking/applying the goods receipts transaction quantities against oldest schedule line item dates and then downloading the file to Excel.
o Classical Interactive Reports for calculating average Day Payable Outstanding. Option 1) in summary by company code, vendor, currency. (w/ DPO calc) Option 2) in detail (w/o DPO calc) Option 3) special summary by vendor and roughly convert different currency into one currency of choice, using current YEARLY rate.
thow to do these objects
plz assist me
and how to transfer the data from from one server to other like 3.1 to 5.0
plz assist me
Edited by: Alvaro Tejada Galindo on Feb 21, 2008 5:28 PM

Hi,
You can use Call Transcation tcode
for calling the transaction u can pass values to the transaction by using SET PARAMETER ID and GET PARAMETER ID
technique.
For downloading use function module LIST_DOWNLOAD
or GUI_DOWNLOAD.

How can I disable POST GOODS RECEIPT button in transactions VL31N/VL32N via Authorization or Role Level.

How can I disable POST GOODS RECEIPT button in transactions VL31N/VL32N via Authorization or Role Level, There is a requirement from my client and i propose two methode
1- Creation of Ztcode ZVL32N and do changes ABAP program level
2- Disablement via Authorization/Role level - but how can i find the auth object/ Authorization corresponds to POST GOODS RECEIPT button in VL32N

I think you can make use of SHD0 - Transaction variant to achieve this. You can make it as grayed out while recording steps in SHD0.

Cancellation of Goods Receipt with Credit Memo Transaction Issue

Dear SAP Expert and Guru,
Normally cancellation of goods receipt cannot be done when invoice has been issued. Cancellation of Goods receipt can only be done when there is the credit memo being issued in MIRO.
The problem now is that is there any table that can tracked the linkage between Credit Memo and the Cancellation of Goods receipt?
The goods receipt with the invoice linkage can be found in both table EKBE and BKPF. But not the credit memo and cancellation of Goods receipt.
Thank you
Regards
Leonard Tan

Dear Jeya and SAP expert and Gurus,
You are correct, but with the document number, how am I going to get the Cancellation of GR document?
In table BKPF and EKBE. With the invoice number (34*******) then pass it to table BKPF to get the invoice number (52*******),
Then get the invoice number (52*******) pass it to table EKBE to get the Goods Receipt document (61*******).
However, this only can track the transaction goods receipt and Invoice but not the credit memo with cancellation of goods receipt.
Kindly asvise on that.
Thank you
Regards
Leonard Tan
Note : Do not quote previous reply every time,simply reply for member you want to respond.
Edited by: Jeyakanthan A on Jul 8, 2011 3:23 PM

Goods Receipt with respect to Handling Unit (Transaction u0096 MIGO)

Hi All,
A delivery is created for stock transport order for goods movement from Plant XXXX (Storage Location YYYY) to Plant XXXX (Storage Location ZZZZ).
Handling Units are packed on delivery and delivery is post goods issued from Plant XXXX (Storage Location ZZZZ).
While posting goods receipt (Transaction MIGO) without selecting Via Handling Units system populates the packaging material line item whereas when Via Handling Units is selected (in other words when tried to post Goods Receipt with respect to Handling Units) system doesnt populate the associated packaging material.
Requirement is to populate packaging material line item while posting Goods Receipt with respect to Handling Unit.
Plz guide me.
Satish

Hi Vatcan,
Chek the Inbound Delivery 1st weather you refer the right PO in it
You can also chek in PO i
1 Me23n Go to confirmation tab here you can see the Inbound delivery quantity
2 Chek which reference document you recived the goods, (i.e You recived the goods with reference to PO or Inbound delivery)
2 Coz if you refer the inbound delivery then syestem will deafult show the inbound quanity
And yes the actual quanity will update in inbound delivery if you refer the inbound deivery while reciveing the goods

BAPI for Reversal of Goods Receipt Purchase Order(Transaction : MIGO)

Hi all,
Is there any BAPI for the Reversal of posting the documents Goods receipt Purchase order
(Transaction: MIGO).
Any inputs on this..is highly appreciable...
thanks in advance...
regards..
prathima.

Hi,
Try this passing material doc and year.
* Cancel the goods movement (creates a reversal document)
CALL FUNCTION 'BAPI_GOODSMVT_CANCEL'
    EXPORTING
      materialdocument = g_material_doc
      matdocumentyear = g_matdoc_year
    TABLES
      return           = i_return.
Edited by: Raj on May 14, 2008 7:46 PM

BAPI needed for Goods Receipt Purchase Order(Transaction : MIGO)

Hi all,
We have a requirement where in we need to post the documents throuh BAPI for Goods receipt Purchase order(Transaction: MIGO).
Any inputs on this..is highly appreciable...
thanks in advance...
regards..
prathima.

Hi,
use 'BAPI_GOODSMVT_CREATE'
Check this sample.
code
REPORT ZRICH_0001 .
Structures for BAPI
DATA: GM_HEADER TYPE BAPI2017_GM_HEAD_01.
DATA: GM_CODE TYPE BAPI2017_GM_CODE.
DATA: GM_HEADRET TYPE BAPI2017_GM_HEAD_RET.
DATA: GM_ITEM TYPE TABLE OF
BAPI2017_GM_ITEM_CREATE WITH HEADER LINE.
DATA: GM_RETURN TYPE BAPIRET2 OCCURS 0 WITH HEADER LINE.
DATA: GM_RETMTD TYPE BAPI2017_GM_HEAD_RET-MAT_DOC.
CLEAR: GM_RETURN, GM_RETMTD. REFRESH GM_RETURN.
Setup BAPI header data.
GM_HEADER-PSTNG_DATE = SY-DATUM.
GM_HEADER-DOC_DATE = SY-DATUM.
GM_CODE-GM_CODE = '04'. " MB1A
Write 971 movement to table
CLEAR GM_ITEM.
MOVE '412' TO GM_ITEM-MOVE_TYPE .
MOVE 'Q' TO GM_ITEM-SPEC_STOCK.
MOVE '3800533484' TO GM_ITEM-MATERIAL.
MOVE '1' TO GM_ITEM-ENTRY_QNT.
*MOVE 'PC' TO GM_ITEM-ENTRY_UOM.
MOVE '1060' TO GM_ITEM-PLANT.
MOVE '0007' TO GM_ITEM-STGE_LOC.
*MOVE '0901' TO GM_ITEM-MOVE_REAS.
MOVE 'P203601001' TO GM_ITEM-WBS_ELEM.
MOVE 'P203601001' TO GM_ITEM-VAL_WBS_ELEM.
APPEND GM_ITEM.
Call goods movement BAPI
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
EXPORTING
GOODSMVT_HEADER = GM_HEADER
GOODSMVT_CODE = GM_CODE
IMPORTING
GOODSMVT_HEADRET = GM_HEADRET
MATERIALDOCUMENT = GM_RETMTD
TABLES
GOODSMVT_ITEM = GM_ITEM
RETURN = GM_RETURN.
IF NOT GM_RETMTD IS INITIAL.
COMMIT WORK AND WAIT.
CALL FUNCTION 'DEQUEUE_ALL'.
ELSE.
COMMIT WORK AND WAIT.
CALL FUNCTION 'DEQUEUE_ALL'.
ENDIF.
WRITE:/ GM_RETMTD.
LOOP AT GM_RETURN.
WRITE:/ GM_RETURN.
ENDLOOP.
[/code]
Also check the Bapis
BAPI_PO_CREATE --> To create Purchase Order
BAPI_PO_CHANGE --> To change Purchase Order
BAPI_PO_GETDETAIL --> Todisplay Purchase Order
Regards,
Raj.

Error Transaction Currency Differs - Goods Receipt PO

Hi
I am trying to creat a goods receipt po for a overseas order which is in US $
(System Currency in AUS $)
When I try to add the Goods Receipt po i get the following error
Transaction currency differs from account or BP currency
[Goods Receipt PO - Rows- warehouse Code][line:0 ]
[Message 173-57]
Do u have any idea why am i getting this error.
thanks for the help in advance.
Sanjaya

Hi Sanjaya,
Me again, I will be more detailed this time.
The SO/PO will not be a problem as there is no Journal Entry created for those documents. For a Goods Receipt there is a Journal Entry created.
The Journal will debit Stock and credit Allocation Cost account.
The checks to be done:
- The Business Partner must be set to either multi currency or the same currency as the document.
- On the Item Master Data -> Inventory/Stock Data tab, check if the Item set to:
Set G/L Accounts by: WareHouse, Item Group or Item Level.
If it is set by Warehouse check the warehouse on the row level, if it is not already displayed use form settings to display it. Open it and check the above mentioned accounts. In this case they must be set as multi currency.
If it is set to Item Group please check the Item Group on the Item Master Data of all the Items involved in the Goods Receipt PO. Go to these Item Groups and check the above mentioned accounts. Again, they need to be set to multi currency.
If it is set to Iem Level, please use the Form Settings to display the allocation cost account and the stock account. The accounts will be displayed on the Inventory/Stock Data tab for each warehouse row. make sure that the accounts here are multi currency.
If it still does not work, in the Goods Receipt PO use form settings to display the GL account on the row level. Please make sure that for every row the account that is displayed is set to multi currency.
If there should still be problems start checking the tax accounts, after that if they are using additional expenses check those accounts as well.
This should hopefully solve it.
Thanks,
Jesper

Posting goods receipt using transaction MB1C

Hi
When I posting goods receipt using transaction MB1C , I am getting following error
Account 310000 for Transo/event key BSX is a A control Account.
Please tell me the solution for this error.
kalai.

Dear Suriya,
If your issue is still un-resolved, Just try with:
T. Code: FS00
Key-in your G/L Account - 310000 & Company Code, in respective fields; go to
Tab: Create/bank/interest
Here, you will find a Box: Post automatically only. Enable the box (check-mark the box) for GR/IR clearing account.
Jope, this may help in some ways.
Best Regards,
Amit.
Note: In continuation to others' suggestion, I'll also suggest to consult FI-Personnel, at your end.

User exit for transaction code MIGO (Goods Receipt)

Hi Team,
Please let me know the name of the user exit for adding a new field in transaction code MIGO (The field is Freight charges ) at header level.
Would be suitably rewarded.
Regards
Badari

hi,
Transaction Code - MIGO Goods movement
Exit Name Description
MBCF0002 Customer function exit: Segment text in material doc. item
MBCF0005 Material document item for goods receipt/issue slip
MBCF0006 Customer function for WBS element
MBCF0007 Customer function exit: Updating a reservation
MBCF0009 Filling the storage location field
MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0011 Read from RESB and RKPF for print list in MB26
MB_CF001 Customer Function Exit in the Case of Updating a Mat. Doc.
Cheers
Alfred

Inconsistency in IW8W transaction - Refurbishment goods receipt

Similar Messages

Maybe you are looking for