Inconsistency of order header and operation status

Hi guru.
I did final confirmation of the production order.
This production order has one operation.
So..the operation status was changed to 'CNF MILE REL'.
But Order header status was not changed to 'CNF DLV'.
It's status was still 'REL MSPT PRC GMPS SETC'.
I did final confrimation again with 0 qty.
So it was changed to 'CNF DLV'.
But i want to know why first 'final confirmation' could not change the order header status.
Please help me.
Thanks.

Dear Jong,
1) CNF and DLV are two different status
2) If Auto GR is not maintained then you only get status CNF after doing final confirmation in CO11N or in CO15
3) So in your case i guess after doing final confimation you checked the status and found CNF but not DLV
4) after user doing GR in MB31 or in MIGO you might have got status DLV, and mean while again you might have
done final confirmation with zero qty and seeing both status CNF and DLV
Regards
Madhu

Similar Messages

How to cancel the sales order - header and line status are in Entered Stage

Dears,
I have some sales order to be cancelled in which the header and line status are in *"Entered"*. I am not able to cancel these sales order.
Also note that these orders are for maintenance service.Once i book these orders the lines will change to closed status.
So it is not possible to book and cancel the lines.
Kindly me to resolve this.

926530 wrote:
Boss,
If i do Action-->cancel on header, it just makes the qty to zero.But the header and line status still showing as entered.It will not cancel the order.
The problem for me is that these lines are coming in my monthly reports. This is what your question says...be more specific as what is your issue..which in turn is your problem
How to cancel the sales order - header and line status are in Entered Stage
Coming to your Action-->cancel...as far as i know ...the header status will change to canceled..
unless until you have some processing constraints in place...which is stopping you...
HTH
Mahendra

Relation between Maintenance Order No. and Operation Number

Hi all,
I have to make a module pool in which i want to display the following field
Order No.
Operation no. | Operation Description |
Now my problem is that i m not getting the tables from which i have to select data basically i want to extract the data on the basis of Maintenance Order No. and Operation Number.
I have checked the following tables
AFKO , AFVu , AFVC, CAUFV.
But i m not able to find any relation between Maintenance Order No. and Operation Number.
Please help!!!
Thanks and regards,
Rachit khanna

Hello Rachit,
The relation is as follows
AFKO-AUFPL (Routing number is Order header)
Use this routing number to get operations from AFVC
AFVC-VORNR gives operation number
AFVC-LTXA1 gives operation description
For sub-operations, VORNR will be sub-operation number, and AFVC-SUMNR for this sub-operation corresponds to the respective superior operation(refers to AFVC-APLZL).
AFVC-APLZL is a unique number for each operation.
Hope this helps. You can check with some existing/new orders as well.
let me know if you need anything about split operations as well.
Best Regards,
Subhakanth

Merging of Prodn Order number and operation number into the unloading point

Hi,
I am creating the production order using the Tcodes Co01 or co10 and my requirement is that after creating the production number and then when I open that one in the change mode using co02 Tcode the unloading point which is present in the Goods Receipt tab should come as a concatenation of order number and operation number .
Thanks for the help in advance.
Regards,
Venkat.

Hello Rachit,
The relation is as follows
AFKO-AUFPL (Routing number is Order header)
Use this routing number to get operations from AFVC
AFVC-VORNR gives operation number
AFVC-LTXA1 gives operation description
For sub-operations, VORNR will be sub-operation number, and AFVC-SUMNR for this sub-operation corresponds to the respective superior operation(refers to AFVC-APLZL).
AFVC-APLZL is a unique number for each operation.
Hope this helps. You can check with some existing/new orders as well.
let me know if you need anything about split operations as well.
Best Regards,
Subhakanth

Incompletion Log V50UC EXCTR inconsistency at Delivery header and Item lev

Hello Experts
Incompletion Log V50UC EXCTR inconsistency at Delivery header and Item lev
This fields and structure is defined both at header and Item Incompletion procedure .
But at Header level , the field is getting removed , but not at Item level
V50UC- EXCTR.
Can you let me know what to do about this inconsistency / any SAP Note etc .
REgards
Rohit

Hello
This Incompletion log is related to Foreign Trade.
Check maintain required foreign trade data at Item
or If foreign trade is not active for your this business process..Check your config for Incompletion procedure for foreign trade by use TCode VI29.
I hope this suffice your requirment.
Thanks & Regards
JP

Linking Sales Order Header and Item into a DSO

I am trying to combine my Sales Order Header and Item into a DSO.
I created individual DSOs for each extractor and loaded successfully. I then created a new DSO with the Document number as the key field and loaded the data. However, when I check the new DSO, the data is not combined but seperated on one line.
To make it clearer
DSO1
CH1 CH2 CH3 KF1
DSO2
CH1 CH4 CH5 KF2
In my new DSO3, I used CH1 as the key field and when I load data, I expect to see
CH1 CH2 CH3 CH4 CH5 KF1 KF2
But I get
CH1 CH2 CH3 KF1
CH1 CH4 CH5 KF2
Is there something I'm doing wrong?

Hi Siggi
I'm not sure what you mean.
What I am trying to achieve on the long run is to combine Sales Order and Billing into a cube. But first i need to get the orders into a DSO and also Billing into another DSO. And then combine into a consolidated DSO before going to a cube. Please correct if this approach is wrong.
In the meantime, I am trying to combine the sales order item and header into one DSO.

Merging the Production order number and operation number into sequential no

Hi,
I am creating the production order using the Tcodes Co01 or co10 and my requirement is that after creating the production number and then when I open that one in the change mode using co02 Tcode the sequential number which is present in the assignment tab should come as a concatenation of order number and operation number .
Thanks for the help in advance.
Regards,
Venkat.

dear,
this depends on the user buffer set.
for each user there will be a buffer set in when logeed in and create a production order.
depending on the saving the production order saving time there may be a situation as you have now.
discuss with your basis people and under stand the user buffer of numer for production order.

WCS difference between "admin status" and "oper status"

Can anyone explain what the difference is between admin status and oper status within the WCS GUI. It appears that disbaling either on effectively disables the radio...is that correct?

I think I got it figured out...thanks for lookin....

CO11N - Order and Operation status

I use co11n to confirm the operation in order. When i do final confirmation of the first operation the order header status changes to CNF whereas it should be PCNF.(operation gets the status CNF)
Ideally the order status should change to CNF only when all the operations are confirmed.
Pl let me know the reason for this behaviour of system (ECC 6.0)
Thanks
Rohit

Hi All,
Check out in this way....
A confirmation documents the processing status of orders, operations, suboperations and individual capacities.
You can enter a confirmation
- For an Opeartion (co11/co11n)
You have the following options:
- To confirm quantities, durations, activities or personnel data.
- To make a confirmation at a particular point in time (for example, at the start of setup or the finish of processing) enter a
confirmation.
- When you confirm time events, the system calculates the required duration. For example, the setup duration is the time between setup start and setup finish.
- For an Order : CO15
If you enter a confirmation at order header level, the system confirms all the operations that have a control key in which
confirmation is optional or necessary. The quantitiesconfirmed in the operations are proportional to the quantities confirmed in the order header.
Reward if useful.
Regards,
pherasath

Displaying Work Order System and User Statuses in IW37 Search

I'd like to display the work order header system and user statuses along with the operation system and user statuses in an IW37 search but couldn't find an entry as such in the IW37 'change layout' dialog box.
David Macindoe

David Macindoe,
That Order header information isn't available in IW37 report.You may have to use IW37N report or enhance /copy IW37 report to get this information.
Regards
Narasimhan

Header and Line Statuses in OM

hi
Can any one give a brief on the below statuses in OM header and Line Level.
The below is the list
Order Header Statuses
Following is a list of all possible statuses assigned to an order header.
• Active
• Awaiting Invoice Interface - Incomplete Data
• Awaiting Invoice Interface - On Hold
• Awaiting Start Date
• Booked
• Cancelled
• Closed
• Customer Accepted
• Draft
• Draft - Customer Rejected
• Draft - Internal Rejected
• Draft Submitted
• Entered
• Expired
• Internal Approved
• Internal Rejected
• Invoice Interface - Complete
• Lost
• Offer Expired
• Pending Customer Acceptance
• Pending Internal Approval
• Submitted
• Terminated
• User Working
Order Line Statuses
Following is a list of all possible statuses assigned to an order line.
• Awaiting Export Screening
• Awaiting Fulfillment
• Awaiting Invoice Interface - Incomplete Data
• Awaiting Invoice Interface - On Hold
• Awaiting Invoice Interface - Partially Interfaced, RFR Item
• Awaiting Invoice Interface - Pending Complete Delivery
• Awaiting Invoice Interface - RFR Item
• Awaiting Invoice Interface - Unexpected error
• Awaiting Payment Assurance - On Hold
• Awaiting Payment Assurance - Receipts Not Assured
• Awaiting Receipt
• Awaiting Reprice - Invalid setup
• Awaiting Reprice - On reprice line hold
• Awaiting Reprice - Pricing error
• Awaiting Reprice - Unexpected error
• Awaiting Return
• Awaiting Return Disposition
• Awaiting Shipping
• Awaiting Supply
• BOM and Routing Created
• Booked
• Cancelled
• Closed
• Completed Export Screening
• Config Item Created
• Customer Accepted
• Data Error Export Screening
• Draft
• Draft - Customer Rejected
• Draft - Internal Rejected
• Draft Submitted
• Entered
• Fulfilled
• Interfaced to Receivables
• Internal Approved
• Internal Rejected
• Inventory Interfaced
• Invoice Interface - Not Applicable
• Lost
• Offer Expired
• PO-Created
• PO-Partial
• PO-Received
• PO-ReqCreated
• PO-ReqRequested
• Partially Interfaced to Receivables
• Payment Assurance - Complete
• Payment Assurance - Incorrect Data
• Pending Customer Acceptance
• Pending Internal Approval
• Picked
• Picked Partial
• Preprovision
• Preprovision Failed
• Preprovision Requested
• Preprovision Succeeded
• Production Complete
• Production Eligible
• Production Open
• Production Partial
• Provisioning Failed to update Transaction Details
• Provisioning Rejected
• Provisioning Requested
• Provisioning Successful
• Provisioning in Error
• Released to Warehouse
• Reprice - Complete
• Reprice - Not Applicable
• Returned
• Scheduled
• Shipped
• Supply Eligible
• Supply Open
• Supply Partial
• Third Party Billing Failed
• Third Party Billing Requested
• Third Party Billing Succeeded

This information can be found in the Approvals Management implementation guide in metalink. The part number for this document is B31622-02
Regards

To change the Purchase order header and line item text

Hi everybody,
I need to upload the PO Header and item text for the combinaion of PO and a material.
Please help???

Hi,
Try this beloe code
      Length of the PO item text
      If the length > 132 Chars
BAPI Function module for changing PO item Text
commiting the bapi change
SORT t_bapi BY ebeln ebelp.
LOOP AT t_ebeln INTO wa_ebeln.
    LOOP AT t_bapi INTO wa_bapi WHERE ebeln = wa_ebeln-ebeln.
      REFRESH t_return.
      READ TABLE t_input INTO wa_input
        WITH KEY ref_num = wa_bapi-ref_num
                 item = wa_bapi-ebelp.
      IF sy-subrc EQ 0.
        APPEND wa_input TO t_output.
        w_len = STRLEN( wa_input-text ).
        wa_potextitem-po_number = wa_bapi-ebeln.
        wa_potextitem-po_item = wa_bapi-ebelp.
        wa_potextitem-text_id = 'F01'.
        wa_potextitem-text_form = '*'.
        wa_potextitem-text_line = wa_input-text+0(132).
        APPEND wa_potextitem TO t_potextitem.
        IF w_len > 132.
          wa_potextitem-po_number = wa_bapi-ebeln.
          wa_potextitem-po_item = wa_bapi-ebelp.
          wa_potextitem-text_id = 'F01'.
          wa_potextitem-text_form = '='.
          wa_potextitem-text_line = wa_input-text+132(123).
          APPEND wa_potextitem TO t_potextitem.
        ENDIF.
      ENDIF.
    ENDLOOP.
    CALL FUNCTION 'BAPI_PO_CHANGE'
      EXPORTING
        purchaseorder = wa_bapi-ebeln
      TABLES
        return        = t_return
        potextitem    = t_potextitem.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
      EXPORTING
        wait   = ' '
      IMPORTING
        return = wa_bapiret2.
Regards
Krishna

How to make pricing field as output only in sales order header and item lev

Hi ,
I want to make the field PRICING DATE as output only both at header and item level. How can i do pls guide me in detail.
Regards
Sunaina

Hi Sunaina ,
Through User Exit you get this requirement plese take help of ABAPer to activate the user exit according to your requirement.
Try With this User Exit
Program MV45AFZZ
USEREXIT_FIELD_MODIFICATION
This user exit can be used to modify the attributes of the screen fields.
To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
The usage of the field groups (modification group 1-4) is as follows:
Modification group 1: Automatic modification with transaction MFAW
Modification group 2: It contains 'LOO' for step loop fields
Modification group 3: For modifications which depend on check tables or on other fixed information
Modification group 4: is not used
The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
This FORM routine is called up by the module FELDAUSWAHL.
See the Screen Painter manual for further information on structuring the interface.
I hope it will help you,
Regards,
Murali.

ECM header and OMR status tables?

In which tables can i find ECM header statuses (approve, close, check ECR...etc) and Object managment records statuses (change possible, release change etc)
I checked many tables like AENR, AEOI, and few others but no use. Please help me here

Also you can go Enviroment-Reporting-status report to the details status for ECR.
Please refer the attachement.
Cheers

Proces Order TECO and CLSD status

Dear All,
I want to make user status TECO & then CLSD to my multiple process order.
By the t code COHV user status TECo can possible with single transaction.
But how can i make CLSD status to my multiple process order?

Hi ,
Enter production orders in COHV and select tab "Mass processing"
in function field select "Complete" and execute.
I have mentioned the Pre requites for closing order.
Pre requites of settling order.
1. Order status should be TECO.
2. Order should have settlement rule.
Once you have settled the order and no open quality inspection lot or any open error is pending then you can close the production order through above mentioned step.
Regards,
Vishal

Inconsistency of order header and operation status

Similar Messages

Maybe you are looking for