Inconsistency re:Toolbox & SU

I tried to backup my W7/32 laptop(X200) yesterday and the backup started then canceled itself after about 10 minutes (msg: backup could not complete). I opened system update and noticed there were 2 entries waiting to be downloaded for Toolbox.
Toolbox for W7 32bit
Toolbox for Windows 7
This did not make sense to me at all. The second was was about 80MB in size (assumed it to be a complete install ... However I do have Toolbox currently installed).
I got out of SU and opened Toolbox in W7. It started up and stated that I had not run any backups for 35 days (no cancellations noted even though it had canceled itself twice). There is no 'about' button on the apps page. It then proceeded to check for updates on its own & downloaded 13.7MB ... I installed it.
SU still wants to download the 80MB version ...why? Is this a reinstall to fix the RR problem (details do not indicate this)?
T23: 2647-8RU, Ubuntu 12.04 LTS
A61E: 6418-12U, W7/Pro 64
X200: 7454-CTO, W7/Pro 32
Solved!
Go to Solution.

I have Toolbox 6.0.5692.08 installed. I understand that this is the lastest release.
The Toolbox version that is in SU only states that it is V3 (confusing to say the least).
As my backups are not working at all I chose to download what SU is offering ... all 78MB downloaded successfully and the install started. It did not install successfully and offered me 'manual install'. I selected it and it installed Lenovo Thinkpad Experience (?). I opened up SU again, reran Get Updates and the Toolbox download had disappeared. I rebooted.
I ran Backup after this and it canceled itself (that totals 5 times now). R+R still not working at all.
No point resending the screen capture to the site you suggested as the incidents for Toolbox have now disappeared from SU. I have nothing left in my SU list to download, so now I am apparently up to date!
Update (4 hours later): I uninstalled Toolbox (obviously the last auto update corrupted it (or maybe it was SU that corrupted it ... who knows! I rebooted and reran SU ... Toolbox W32 bit appeared (37MB). Interesting that the size of this product fluctuates so much. Selected Toolbox and it downloaded and installed successfully. Tried to run Backup ... it canceled itself (no error message).
Went out on the net and bought Paragon Drive Backup. Ran it and did a restore. Works great. Had enough of R+R.
T23: 2647-8RU, Ubuntu 12.04 LTS
A61E: 6418-12U, W7/Pro 64
X200: 7454-CTO, W7/Pro 32

Similar Messages

OPEN_INTERFACE_REJECTS- INCONSISTENT SUPPL SITE

Payables Open Interface Import program is throwing INCONSISTENT SUPPL SITE, when a third party vendor site code and third party vendor site id is passed along with matching PO number for creating an invoice for third party vendor site.
Can any one let me know, how to resolve this issue.
Thanks in advance

Hi,
this could be due to passing values which are not correct for the vendor_site_id field ....do compare this transaction with other transactions that are imported successfully past, so that we can narrow down on the data which is different ...
Reference:
Expense Report Export Rejects Expense Reports With 'Supplier Site Id And Supplier Site Code Do Not Match' [ID 1408830.1]
Regards,
Ivruksha

LaserJet 1536dnf's ToolBox FX no longer views faxes received to Windows 8.1 (64-bit) laptop

My 1536dnf was previously receiving faxes to my Toshiba laptop. A message box would appear on screen informing me when faxes were received. I used to be able to open the HP ToolBoxFX where a list of faxes received would appear in the received faxes log screen - AND A CLICK ON "VIEW" LINK would be displayed; I'd click on "VIEW" and the fax would apear as a PDF doc.
HOWEVER, for some reason the VIEW link no longer appears in the received faxes log; there is nothing to click on to view the fax, and hence I CANNOT VIEW RECEIVED FAXES anymore.
In the received faxes log screen it still displaces the date/time, number of pages, and from whom the fax is received, I am just not able to view the (apparently) received fax. If I knew what folder on my PC the faxes were stored I would go there to pull up the PDF docs, but I cannot find where this data is stored.
I've also noticed thatI have April 2014 firmware and the latest firmware update is dated August 2014, but after multiple attempts the latest firmware update will not install. It downloads, appears to install, but the config report indicates the newest firmware is NOT installed.
The LJ 1536dnf remains in my local network via eathernet cable, and the printer and scanner components of the MFP function normally. The fax component manually sends faxes and can receive and print faxes in hard copy form.
**PLEASE SOMEONE HELP** Thank you in advance.

Hi @SimonSpeak ,
I see that you are having issues opening the faxes from the Toolbox. I will be happy to help you.
Restart the computer.
Temporarily turn off the Antivirus Software, just to rule out any interference.
Try opening the Toolbox Software again.
Make sure Adobe Flash is up to date. I believe it piggy banks the HP Toolbox Software.
You can always restore your computer back to a earlier time when everything was working properly. It might have been a update that caused this issue, since uninstalling and reinstalling the software isn't allowing the software to work either. How to refresh, reset, or restore your PC on Windows 8.
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
Try updating the printer's firmware by a USB connection. HP LaserJet Firmware Update Utility.
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

USB 6009 DAQ to use in Simulink at External mode with DAQ toolbox

hi
Currently I am using usb 6009 daq board for data acquisition in using simulink. I have created a model with taking analog input from data acquisition toolbox. Then when i want to run in external mode and try to connet to target, the following error is coming up:
Could not execute target data map file 'untitled_rtwin_win32\untitled_targ_data_map' or it does not exist. Stop the target, delete the untitled executable, rebuild the code,and try again. Note that execution of external mode requires the build directory to be present...
How can I solve this problem? For your info, I am using 32-bit matlab, version: 2012a
For your info, a snapshot of the error is attached,
Any help would be appreciated Thanks
Attachments:
Untitled.jpg ‏130 KB

Hi Mahmudur,
what does MathWorks say about this error message?
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

SAP System inconsistency for Inbound delivery / MIGO and a "sap note"

Hello Friends ,
After following SAP instruction on how to remove the inconsistency between posting GR through MIGO (Inv. mang.) and the reflection of the goods movement status in the inbound delivery document - done that using sap note 570991
the problem is that the system start behaving in a weird way throwing unjustified Error messages for any suggested goods receipt using MIGO with reference to inbound
for example after creating an inbound delivery document and trying to post it via migo , an error will pop up
- Inbound delivery storage location cannot be changed to here Message no. VLA316
the thing is i didn't even maintain any storage location entry up to that point and yet i cannot post any stock !!
also another error like
- Inbound delivery batch cannot be changed to *** here
which doesn't make any sense because there is not batches in the inbound document !!
i think this behavior is coming from the "Document Flow Update for Stock Postings" inbound indicator at the shipping parameter at client level customization
i need help on how to overcome this annoying SAP Bug/Problem specially i am in a post go live critical situation

Hi,
The messages you mentioned were introduced to avoid inconsistency between inbound delivery and IM, through the note: 1050944 - GR for inbound delivery using inventory mgmt as of ECC 6.00
If the messages are issued incorrectly, then you may check for SAP notes (I couldnt find anything relevant) or raise an OSS ticket to SAP.
Regards,
AKPT

Inconsistency between catalog authoring tool & Search engine

Hi,
We are on CCM2.0 and SRM5.0 with catalog deployment in the same client as SRM.
In our implementation we are using master catalog and product catalog. We have very recently deleted around 65 items from our product catalog which is mapped to mater catalog and hence those 65 items are not found anymore in master catalog in CAT (Catalog authoring tool).
This master catalog when published, we expect that these 65 products should not be available for end users.
But end users can still see the deleted items through CSE (Catalog search engine). Thus there is data inconsistency between CAT & CSE.
Has anyone faced similar issue before if yes can you please share the same with us.
Edited by: Manoj Surve on Mar 24, 2009 7:05 AM

Run TCODE SE38 program /CCM/CLEANUP_MAPPING to look for errors/orphaned records in test mode.
If you want to clear out orphaned records uncheck the Test Mode but:
Warning: This program can slow down a production system as it clears out the memory buffers for user catalog searches and these have to be built up again by the users doing searches. This can be hours to days depending upon the size of your system and the number of users.
In Dev or UAt no problem.
Hope this helps?
Regards
Allen

Inconsistency between get-childitem -include and -exclude parameters

Hi,
Powershell 2.0
Does anyone else consider this a minor design bug in the Get-ChildItem command?
# create dummy files
"a","b","c" | % {$null | out-file "c:\temp\$_.txt"}
# this "fails", returns nothing
get-childitem c:\temp -include a*,b*
# this "works", returns desired files
get-childitem c:\temp\* -include a*,b*
# this "works", excludes undesired files
get-childitem c:\temp -exclude a*,b*
# this "fails", excludes undesired files BUT RECURSES sub-directories
get-childitem c:\temp\* -exclude a*,b*
I'm writing a wrapper script around the GCI cmdlet, but the inconsistency between the two parameters is problematic. My end user will surely just type a path for the path parameter, then wonder why -include returned nothing. I can't unconditionally
add an asterisk to the path parameter, since that messes up the exclude output.
I'm just wondering why Microsoft didn't make the parameter interaction consistent???
# includes desired files in the specified path
get-childitem -path c:\temp -include a*,b*
# excludes undesired files in the specified path
get-childitem -path c:\temp -exclude a*,b*
# combine both options
get-childitem -path c:\temp -include a*,b* -exclude *.log,*.tmp
# same as above, the asterisk doesn't matter
get-childitem -path c:\temp\* -include a*,b*
get-childitem -path c:\temp\* -exclude a*,b*
get-childitem -path c:\temp\* -include a*,b* -exclude *.log,*.tmp
# same as above, but explicitly recurse if that's what you want
get-childitem -path c:\temp\* -include a*,b* -recurse
get-childitem -path c:\temp\* -exclude a*,b* -recurse
get-childitem -path c:\temp\* -include a*,b* -exclude *.log,*tmp -recurse
If I execute the "naked" get-childitem command, the asterisk doesn't matter...
# same results
get-childitem c:\temp
get-chileitem c:\temp\*
If this isn't considered a bug, can you explain why the inconsistency between the two parameters when combined with the -path parameter?
Thanks,
Scott

The Get-ChildItem cmdlet syntax is horrific for advanced use. It's not a bug in the classic sense, so you shouldn't call it that. However, feel free to call it awful, ugly, disastrous, or any other deprecatory adjective you like - it really is
nasty.
Get-ChildItem's unusual behavior is rooted in one of the more 'intense' dialogues between developers and users in the beta period. Here's how I recall it working out; some details are a bit fuzzy for me at this point.
Get-ChildItem's original design was as a tool for enumerating items in a namespace -
similar to but not equivalent to dir and
ls. The syntax and usage was going to conform to standard PowerShell (Monad at the time) guidelines.
In a nutshell, what this means is that the Path parameter would have truly just meant Path - it would not have been usable as a combination path specification and result filter, which it is now. In other words
(1) dir c:\temp
means you wanted to return children of the container c:\temp
(2) dir c:\temp\*
means you wanted to return children of all containers inside
c:\temp. With (2), you would never get c:\tmp\a.txt returned, since a.txt is not a container.
There are reasons that this was a good idea. The parameter names and filtering behavior was consistent with the evolving PowerShell design standards, and best of all the tool would be straightforward to stub in for use by namespace
providers consistently.
However, this produced a lot of heated discussion. A rational, orthogonal tool would not allow the convenience we get with the dir command for doing things like this:
(3) dir c:\tmp\a*.txt
Possibly more important was the "crash" factor. It's so instinctive for admins to do things like (3) that our fingers do the typing when we list directories, and the instant failure or worse, weird, dissonant output we would get with a more pure Path
parameter is exactly like slamming into a brick wall.
At this point, I get a little fuzzy about the details, but I believe the Get-ChildItem syntax was settled on as a compromise that wouldn't derail people expecting files when they do (3), but would still allow more complex use. I think that this
is done essentially by treating all files as though they are containers for themselves. This saves a lot of pain in basic use, but introduces other pain for advanced use.
This may shed some light on why the tool is a bit twisted, but it doesn't do a lot to help with your particular wrapping problem. You'll almost certainly need to do some more complicated things in attempting to wrap up Get-ChildItem. Can you describe some
details of what your intent is with the wrapper? What kind of searches by what kind of users, maybe? With those details, it's likely people can point out some specific approaches that can give more consistent results.

Inconsistency between tbtco and tbtcs

Hello guys,
we have a big problem after our HWU upgrade.
We have copied the content of tbtco into a new table tbtco_copy before the upgrade to save all the job entries.
After this we have deleted the contant of tbtco. So we had no scheduled jobs for the HWU
After the HWU we have copied back the content of tbtco_copy into tbtco.
But now we have a inconsistency between tbtco and tbtcs. This means that all planed and released jobs are not starting (delay goes up).
How we can start this jobs << Removed >>
Br
Christian
Edited by: Rob Burbank on Apr 19, 2009 4:23 PM

USer TR: SM65

New MBP -- Wireless Connectivity Inconsistent (Despite MBP's Claims)

Have a new MBP, running 10.5.6 straight out of the box. All essential system updates have been downloaded and installed (one FCE update remains undownloaded). The Airport connection is tenuous -- it will stay connected to the internet for hours at a time, and then go out repeatedly. Every time it goes out, diagnostics claim it is connected, as does the Network dialogue in System Preferences, even when it is impossible to load any web page (or complete system update downloads!).
A few things:
1. At no point does the MBP indicate that it has lost a connection to the wireless network.
2. While internet connection is lost on MBP, I am still able to connect wirelessly with my Powerbook, implying that internet connection/router/ISP is not to blame.
3. I tried entering IP information manually, but to no avail. On a lark, I switched the IP address of the MBP with the PB, but PB continued to be able to connect to internet while MBP struggled.
4. While internet connection via my secure wireless network is lost on MBP, I am able to connect MBP to a nearby unsecured wireless network (presumably a neighbor's). I have purposely not maintained connection to this wireless network for long stretches (though I'm using it now to compose this query), so I don't know that the connectivity issues are absent when connected to it, but I have not experienced any inconsistency when connected to it, even in phases when I am experiencing inconsistency with my secure network.
5. My network is secured by way of a WEP 128-bit hexadecimal password. However, the settings under Network in System Preferences insist on calling it a WEP password, no matter how many times I change it to WEP 128 hex.
6. On a couple of occasions, when experiencing proper connectivity on my secure network, I have tried locking the Network settings in System Preferences. Paradoxically, doing this seems to immediately disconnect me from the internet.
That's all I can think of for now. This problem seems not unrelated to some other problems described in messageboards across the web, but I didn't see anyone outline the problem in the exact way that I've experienced it (nor have I seen a sure-fire solution posted to the problems I have read about).

Folks: *there may be a power/signal issue going on here.* I had a similar problem of my network connection dragging to practically nothing when hooking up my LaCie external drive to the USB port. Please see my post below (link and text)
http://discussions.apple.com/thread.jspa?messageID=9914924#9914924
Folks:
Apple needs to get on this issue fast; after turning off my N mode on my WRT160N Linksys Router, I got my packet speed back up to where it should be... HOWEVER I noticed another problem.
When I hooked up my LaCie external drive (connected via USB), my packets on PING practically stall to nothing. I then eject the external USB drive and re-ping and I get acceptable packet speeds; I re-connect the LaCie external drive to the USB port and my PING crawls to nothing.
There is CLEARLY a correlation between the network speed crawling to nothing while hooking up an external drive; possibly a power sink and/or signal interference on the Airport when hooking up a USB device? (or perhaps even Firewire 800 too?)
I sure hope Apple is reading this one, because this could be a MAJOR issue that needs to be fixed ASAP.

SSIS Package Load Failure and is missing Execute SQL Task in Toolbox

Also, BIDS closes after right-clicking the toolbox and selecting “Choose Items”.
I’ve tried several ways to fix these issues with no success.
I’m running SSIS/SSMS/SQL Server 2008 R2 (but not running an SQL instance on my PC) on a Windows XP with Service Pack 3 workstation. I get the following errors:
WHEN OPENING BIDS:
I get 2 errors titled “Package Load Failure”. They both reference ‘Visual Studio Explorers and Designers Package’ as being what failed to load. The first message references GUID 8D8529D3-625D-4496-8354-3DAD630ECC1B. The second references GUID AA612177-A69A-4391-B2F4-17F8A88F4BBA
. They both mention contacting the package vendor, but I haven’t got any Add-ins loaded so I’m not sure what that means exactly. They also both ask if I’d like to skip loading the package in the future.
ONCE BIDS IS OPEN:
No error messages appear here. There is no ‘Execute SQL Task’ in the toolbox for Control Flows. Also, if I attempt to open a project containing this object (Execute SQL Task), I get this error in a modal window:
TITLE: Microsoft Visual Studio
There were errors while the package was being loaded.
The package might be corrupted.
See the Error List for details.
BUTTONS:
OK
. . . and these errors in the Error List at the bottom of the IDE:
Error      1
Error loading Package.dtsx: Failed to load task "Execute SQL Task", type "Microsoft.SqlServer.Dts.Tasks.ExecuteSQLTask.ExecuteSQLTask, Microsoft.SqlServer.SQLTask, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91". The contact information
for this task is "Execute SQL Task; Microsoft Corporation; Microsoft SQL Server 2008 R2; © 2007 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1".
        C:\Documents and Settings\848862.VCHS_NT_DOMAIN\My Documents\Visual Studio 2008\Projects\LearnSSIS\LearnSSIS\Package.dtsx
1
1
Error      2
Validation error. Execute SQL Task : The task has failed to load. The contact information for this task is "Execute SQL Task; Microsoft Corporation; Microsoft SQL Server 2008 R2; © 2007 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1".
        Package.dtsx
0
0
Error      3
Validation error. Execute SQL Task : There were errors during task validation.
   Package.dtsx
0
0
Finally, when I attempt to add the Execute SQL Task via the Tools menu, “Choose Toolbox Items” selection, I do get the tabbed box for adding things. However, they only come up after issuing this error:
The following assemblies are installed SDK assemblies but could not be shown in the customize toolbox dialog because they are missing one or more components. Please make sure that all necessary libraries are available:
Microsoft.SqlServer.SqlCEDest.dll
Microsoft.SqlServer.Management.CollectorTasks.dll
Microsoft.SqlServer.SQLTask.dll
System.Data.SqlServerCe.dll
Microsoft.Synchronization.Data.SqlServerCe.dll
(above dll repeated at bottom of message)
After this message, I have my choice of .NET Framework Compnents. When I select COM Components, those come up with no problem. The WPF Components tab generates the same dll error above. The Maintenance tab is empty. The SSIS Data Flow Items tab loads fine,
as does the SSIS Control Flow Items tab – but there’s no Execute SQL Task there either.
If you open the toolbox (on a new project, with a project loaded, or without a project loaded) and right-click, then select “Choose Items”, the entire application quickly closes. This “closing behavior” is the same thing you get if you attempt to add toolbox
items through either the Tools menu or the right-click method when you launch BIDS in SafeMode.
In an effort to fix this – I’ve rolled back the .NET Framework version to 3.0 and reinstalled back up to 4; I’ve uninstalled and reinstalled SQL Server 2008 R2 shared services as well as the entire application; I’ve cleared the .tbd files from my user profile;
and I’ve run several things from the command line (devenv.exe /resetuserdata, /setup, /resetskippkgs, etc.). Lastly – I’ve applied every Service Pack and update applicable to my PC (ok, it belongs to my employer – but no one here has been able to figure this
out either).
After having worked this for several days now and, I think, exhausting every available avenue from search engines – I turn to you. Please let me know if you can help. Also, I can provide any additional
files or information you may require.
CBS

try: Devenv.exe /ResetSettings
http://msdn.microsoft.com/en-us/library/ms241273(v=vs.80).aspx
Or try this (it's for 2005, but maybe it works for 2008 aswell):
http://geekswithblogs.net/cicorias/archive/2007/10/10/Restoring-Missing-Toolbox-Items-in-Visual-Studio-2005---just.aspx
or try
http://stackoverflow.com/questions/1268298/how-to-rebuild-the-visual-studio-toolbox
"You can also go into the folder "C:\Documents and Settings\\Local Settings\Application Data\Microsoft\VisualStudio\9.0" and delete the *.tbd files. I have had to do this a couple times to get rid of duplicate items and when Reset Toolbox crashes
without warning"
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter

Error while trying to choose query parameter Inconsistent input paramete

I got error on PRD while trying to choose parameter before executing BEX query:
101 Inconsistent input parameter (parameter: <unknown>, value <unknown>)
100 Program error in class SAPMSYY1 method: UNCAUGHT_EXCEPTION
Notes:
the same functionality works fine in DEV environment.
the other parameters on query in PRD work fine
the parameter with error based on custom hierarchy
P.S. I heart BEx :]

Hello,
This problem has been solved before with notes 1236774, 1151320 & 1264213.
Please check.
Thanks,
Michael

Inconsistency in GL account

Good day sir/madam,
I have a problem of GL account inconsistency. After merging company 2 years ago, the company did not use a company code XXX any longer. Along last year (2006), we did not post any amount to GL account 900000 (profit and loss) in any period that caused all the entries in trx FS10N blank. Somehow after closing the year of 2006 and opening the year of 2007, I found the amount of -768.200 IDR from balance carry forward line and all the other period of year 2007. I have no idea where the amount came from. Could you give me some info to investigate this problem so that we can find the activity that caused this problem happened.
Thank you for your support.
Regards.

Hi,
Try rerunning F.16 in test run/normal run and see if it shows again.
Rgds.

CRM 2013 - Inconsistent javascript issue crash the web client and user needs to reopen

Hello,
We are using CRM 2013 on premise version and almost 600 users are using it. We have some inconsistent JavaScript issue (following is the log for same) which happens to users in a day or two. When this issue occurs user can not work in system and they have
to open new instance of CRM.
Does anybody knows about this error?
<CrmScriptErrorReport>
<ReportVersion>1.0</ReportVersion>
<ScriptErrorDetails>
   <Message>Unable to get property 'location' of undefined or null reference</Message>
   <Line>1</Line>
   <URL>/_static/_common/scripts/main.js?ver=1676323357</URL>
   <PageURL>/main.aspx#313155368</PageURL>
   <Function>anonymous($p0,$p1,$p2){this.$3_3.get_currentIFrame()&&Mscrm.PerformanceTracing.write("Unload",this.$3_3.get_currentIFrame().src);this.$H_3=$p0.toString();this.$26_3();this.$1A_3();this.$1J_3();if($p0.get_isLocalServer())$p0.get_query()["pagemode"]="iframe</Function>
   <CallStack>
    <Function>anonymous($p0,$p1,$p2){this.$3_3.get_currentIFrame()&&Mscrm.PerformanceTracing.write("Unload",this.$3_3.get_currentIFrame().src);this.$H_3=$p0.toString();this.$26_3();this.$1A_3();this.$1J_3();if($p0.get_isLocalServer())$p0.get_query()["pagemode"]="iframe";addPassiveAuthParameters($p0);var$v_0=$p0.toString();if(IsNull($p2))$p2=false;var$v_1=this.$18_3($p0,$p2);if($v_1){if(this.$2z_3()){window.location.reload();return}this.$2d_3();this.$1s_3();Mscrm.PerformanceTracing.write("Navigate",$v_0);!Mscrm.Utilities.isIE()&&this.raiseEvent(Mscrm.ScriptEvents.UpdateTopLocation,null);this.$3_3.get_currentIFrame().contentWindow.location.replace($v_0)}else{this.$10_3();var$v_2=this.get_contentWindow().Sys.Application.findComponent("crmPageManager");if($v_2){!Mscrm.Utilities.isIE()&&$v_2.raiseEvent(Mscrm.ScriptEvents.UpdateTopLocation,null);var$v_3={};$v_3["sourceUri"]=Mscrm.Utilities.getContentUrl(null);$v_2.raiseEvent(Mscrm.ScriptEvents.IFrameReactivated,$v_3)}}window.self.InnerIFrameSrcChangeTimestamp=(newDate).getTime();this.title=$p1;if(window.LOCID_UI_DIR==="RTL"&&$p0.toString().indexOf("PersonalWall")>=0&&window.UseTabletExperience)this.$3_3.get_currentIFrame().style.position="RELATIVE"}</Function>
   </CallStack>
</ScriptErrorDetails>
<ClientInformation>
   <BrowserUserAgent>Mozilla/5.0 (compatible; MSIE 10.0; Windows NT 6.1; WOW64; Trident/6.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET4.0C; .NET4.0E; InfoPath.3)</BrowserUserAgent>
   <BrowserLanguage>en-US</BrowserLanguage>
   <SystemLanguage>en-US</SystemLanguage>
   <UserLanguage>en-US</UserLanguage>
   <ScreenResolution>1366x768</ScreenResolution>
   <ClientName>Web</ClientName>
   <ClientTime>2015-04-20T15:41:12</ClientTime>
</ClientInformation>
<ServerInformation>
    <OrgLanguage>1033</OrgLanguage>
    <OrgCulture>1033</OrgCulture>
    <UserLanguage>1033</UserLanguage>
    <UserCulture>1033</UserCulture>
    <OrgID>{E8BBA7AE-A552-DE11-B475-001E0B4882E2}</OrgID>
    <UserID>{614837CD-448B-DE11-A5E1-005056970D6C}</UserID>
    <CRMVersion>6.1.2.112</CRMVersion>
</ServerInformation>
</CrmScriptErrorReport>

Are you on-premise, or on-line? : It's on-premise
Can you reproduce it on-demand, or is it sporadic?: It's sporadic
There is a mention of loading an iFrame in the error, do you have iFrames on the form that generates this error?
It's not on specific forms, so can't identify that. Yes we have iframes on some forms.
Does it happen on any/all entity forms, or specific ones? Do the entity forms have any custom JavaScript on them?
It's not on specific forms. And yes we have javascript on almost all forms.
Do you have any network problems or slowness in your network? Does the problem happen when the network is busy?
We need to check this on next occurrence.
Do the users that see this error have any unusual add-ins or toolbars in their browser?  This is not for specific user. Its happening for all randomly.
Have you tried other browsers like Chrome or FireFox and do users see the problem there as well?
We need to check only for IE.

Performance with MySQL and Database connectivity toolbox

Hi!
I'm having quite some problems with the performance of MySQL and Database connectivity toolbox. However, I'm very happy with the ease of using database connectivity toolbox. The background is:
I have 61 variables (ints and floats) which I would like to save in the MySQL-database. This is no problem, however, the loop time increases from 8ms to 50ms when using the database. I have concluded that it has to do with the DB Tools Insert Data.vi and I think that I have some kind of performance issue with this VI. The CPU never reach more the 15% of its maximum performance. I use a default setup and connect through ODBC.
My questions are:
1. I would like to save 61 variables each 8-10ms, is this impossible using this solution?
2. Is there any way of increasing the performance of the DB Tools Insert Data.vi or use any other VI?
3. Is there any way of adjusting the MySQL setup to achieve better performance?
Thank you very much for your time.
Regards,
Mattias

First of all, thank you very much for your time. All of you have been really good support to me.
>> Is your database on a different computer? Does your loop execute 61 times?
Database is on the same computer as the MySQL server.
The loop saves 61 values at once to the database, in one SQL-statement.
I have now added the front panel and block diagram for my test-VI. I have implemented the queue system and separate loops for producer and consumer. However, since the queue is building up faster then the consumer loop consumes values, the queue is building up quite fast and the disc starts working.
The test database table that I add data to is created by a simple:
create table test(aa int, bb char(15));
...I'm sure that this can be improved in some way.
I always open and close the connection to the database "outside the loop". However, it still takes some 40-50 ms to save the data to the database table - so, unfortunatly no progress to far. I currently just want to save the data.
Any more advise will be gratefully accepted.
Regards,
Mattias
Message Edited by mattias@hv on 10-23-2007 07:50 AM
Attachments:
front panel 2.JPG ‏101 KB
block diagram.JPG ‏135 KB

Open Order Quantity Inconsistent issue

Hi,
We are being using Open Order Quantity key figure in our BI model.Not Open Order Quantity key figure is inconsistent in BI system.
It has been used in several places.Hence i don't want go for redesing it.
Please some one can help me without creating new Open Order Quantity key figure.
Answer would be greatly appreciated.

Hi
your query is not clear however making few assumption can give below inputs. Assume you are using LIS 11 extractor. Open order quantity varies from business to business , how do they actually define it.
Get the extact definiton from business how they calculate open order quantity , accoridngly build the keyfigure. for example if open order quantity is orders for which status is not complete then quanity = open order quantity.
EG: Using 2lis_11_VAITM
Restrictted key figure = UVALL not equal to 'C' then KBMENG is open order quanity.
Thanks,
Monika

Inconsistency re:Toolbox & SU

Similar Messages

Maybe you are looking for