Inconsistent Airport Utility Indicators

I have two Airport Extremes on my home network, one being bridged off of the other (i.e., Connection Sharing: Off (Bridge Mode). From time totime, I find that one of the units is showing “Yellow” in the Airport Utilitystatus, noting “Airport Utility found and Airport Extreme … that is reportingproblems”. However, when I click on theAE in the Utility, it indicates that the AE is OK, stating, “Your Airportwireless device is not reporting any problems. The yellow indicator causes the Airport Utility to come up with a reportof the problem. Everything seems to workfine, but the notice is irritating. Anybody know what could be causing this? I do have a 2 TB drive hooked up to the USB on the bridged unit butother than that, nothing out of the ordinary. Any help would be appreciated.

I fear the only move now is to wipe Windows 7, re-install W7 & install itunes.
Before doing that, I'd definitely check in over at the AirPort community:
https://discussions.apple.com/community/wireless/airport?view=discussions
(The right folks to be talking to about an Airport issue may well not see your topic over here.)

Similar Messages

Are you having problems with Windows XP Pro and Airport Utility Updates?

I was having problems with my wireless laptop setting up my Bonjour Printer. I checked to make sure I had downloaded the latest updates to Airport Utility and Bonjour. Check. After doing this I noticed I couldn't see my Airport Extreme through the Airport Utility. After much frustration and bringing my entire network crashing down around me, I got help from a knowledgeable guy from Cox Cable in San Diego. He helped me get my trusty iMac Power PC online. It saw my Airport Extreme but no answers were forthcoming in any forums about my XP issues. Here is what finally solved my problem. I uninstalled all Airport Utility and Bonjour Programs. I then went back to Airport Utility 5.3.1 for Windows. It installs Bonjour Printer services with this download. Everything is working perfectly again. I have my Canon Pixma MP500 connected to the USB port on my AEBS and Bonjour walked right through the setup process. I suggest that if this works for you, turn off all Airport Utility and AEBS firmware updates until you see that whatever issue Apple created with these updates gets fixed.

Well... it worked! :D
I'm pretty sure the extra 512 memory stick was the problem, that would explain why it was being inconsistent with its type of failures before. I'm going to reinstall it later and run memtest86 and try and see if i can get it to work at all somehow without causing problems, cuz 1.5 was already low enough...
DryHeat, yeah it was with SP2 but I got it installed now so no worries
Thanks a lot!

After port forward, airport utility can no longer see my time capsule

I tried to forward public port 1025 to private port 80 on a raspberry pi using airport utility. But after I did that, the airport utility can no longer see my time capsule. Wifi still works correctly. Are there any conflicts about port 1025? How to fix that other than resetting the time capsule?
Thanks,
Michael

It doesn't sound like a port that is used.
From the standard google search.. nope.
Reboot the whole network..
No luck tell me what OS version you are running the utility on and what model and firmware TC???
Note with Yosemite, anything can and will happen.

How do I configure the Airport utility to allow more than one rule per port?

How do I configure the Airport Utility (AU) to allow more than one rule per port?
I am on a home network, with broadband cable modem. I have my airport extreme connected to the broadband modem. I have 2 servers in my home that need to be accessed remotely from time (SSH), and they also serve data for an iphone app, so I'm using a variety of protocols. The problem I'm running into is that AU seems to only allow one rule per protocol, so if I go to add another address for access on a specific port that is being used by one of my servers, AU tells me "The Port Mapping Entry Already Exists".
I need to be able to allow SSH on both of my servers, for instance. Am I missing something? Is this doable with AU?
Thanks for any insight.
Khalid

The Port Mapping "rules" on the AirPorts will allow you to: 1. Map a single port to a single IP address OR 2) Map multiple ports to a single IP address.
What you won't be able to do is map a single or multiple ports to multiple IP addresses.

Unable to see Airport Express from Windows Airport Utility

I am setting up an Airport Express to connect remote speakers for a friend with windows base system. The router is a TrendNet.
I have managed to add the Airport Express to the network. I can ping the router, and if I put in the IP address to Airport Utility it is found and I can configure it. Airport Utility on it's own however will not find the Airport Express.
I can currently play to the Airport speakers from multiple iPhones also on the network, so I know that part is working as well. What is not working is the Airport Express is not showing up in iTunes as an available speaker. I am guessing that as the Airport Utility also will not recognize it that is had something to do with firewall rules on the Windows 7 computer or Trendnet Router. I checked Windows 7, and there are four Bonjour entries and one iTunes entry. All seem set open for incoming requests.
At this point I'm puzzled. Any network gurus out there have new ideas?
Thanks
Gary

I just ran both the verify and repair options on both the permissions and the volume. The ~/Library permissions are repaired, but that was all. I also checked the software update, but I have all the latest installed, it seems.
Where can I check my AirTunes version? I tried spotlighting for it, but that search came up empty. I did install the version that came with the AirPort Express. It says "AirPort 4.2", so I guess that's the version installed at the moment. My iTunes version is 7.0.2. I upgraded the firmware to version 6.3.
I have very little knowledge of networking, I'm afraid, and I'm starting to think that maybe the problem could be my router being set up in such a way that it won't allow the AirPort Express to connect properly.
The reason I believe it's my network rather than the AirPort Express is because when I reset the device, I see that new network named "Apple Network xxxxx". When I connect to it, iTunes properly displays that AirTunes selection box in the lower right and I can stream music to it. With the ethernet cable plugged in, the sound does lag every now and then whenever I use an applications that needs Internet access.
The MacBook, router and AirPort Express are about one to two meters apart (that's three to six feet, I think). I'm not quite sure if the SpeedTouch router is set up properly. Luckily, a friend of mine who's a system administrator is coming over today, so I'll ask him if he could have a look at my network setup.
Thanks for all the help and the fast replies! :^)
my thumb is all sore
Bathe it in salt water
I'll try that, haha. :^)
Your English is excellent .
Thanks! :^)

I am unable to see my Airport Extreme/Express on my MacBook via Airport Utility

I have two issues:
1. I am unable to see my Airport Extreme and my Airport Express via my MacBook Air's Airport Utility when I scan for Base Stations. However, the computer is happily connected to the wireless network of my Extreme (the Express is used to extend range)
2. I am unable to see a HDD that is connected via USB cable to the Airport Extreme.
Any suggestions welcome.
Thanks

Further info:
Setup
MacBook Air running OS X 10.5.8
AirPort Extreme Base Station
AirPort Express used to extend range
AirPort Utility v5.5.3
The MacBook Air is actually connected to the wireless network provided by the two AirPorts!
Oddly, I see both AirPorts just fine when using my older PowerBook G4 with an older version of the AirPort Utility.
In addition, I cannot see the external HDD connected to the AirPort Extreme Base Station, and my wireless printer (HP D410a) suddenly stopped working via the MacBook Air. However, it works just fine from my iPhone, which is connected to the same AirPort Extreme/Express wireless network.
Recently, at the request of Sky Broadband, I switched to fixed IP addresses instead of DHCP, as I was having issues with the DHCP set-up.

How do I get my airport extreme to stop recycling? Using OSX 10.7.4, Airport Utility 6.1

How do I get my Airport Extreme to stop recycling? I'm using OSX 10.7.4 and Airport Utility 6.1.

The Airport Extreme is putting out the signal OK. Gan use my iPod no prob. The Mac goes from 'On' to 'looking for networks' back and forth all the time.
As Apple has said the AirPort Extreme is functioning correctly if other devices can connect. You have a Mac issue, so that is really a question for the support area for your Mac.
I suggest that you try one of these general areas, then pick out the specific model that you have:
Desktop Computers Notebooks

How do I access an older AX in a newer vesion of the Airport Utility?

I have had an AX network for over 3 years and have had no problems with it. I just bought a new one to add to my network and I am having all kinds of problems now. Airport utility recognizes both units, but will not allow me to access the older one. It states "An error occured while trying to access the Apple wireless device. Make sure your network conection is valid and try again. Error -6765". Does anyone know what this means?
I did a factory reset of the older unit and I am still having the problem. I thought if I could update the software on the older one that it might work, but it won't give me access to do it.
Please Help!!!!!!!!!

I found another thread from the June 3rd with the same issue. They seam to have a solution, but I am using windows. Does anyone know how to update older AXs on windows computers?

Reset my airport extreme to factory settings, now getting flashing amber. Airport utility cannot see the unit when it scans. How do I access the unit?

Reset my airport extreme to factory settings, now getting flashing amber light. Airport utility scan does not see the device, so I cannot access any setup.
How do I make contact with the unit?

I found another thread from the June 3rd with the same issue. They seam to have a solution, but I am using windows. Does anyone know how to update older AXs on windows computers?

My airport utility does not find my airport express device

My airport utility does not find my airport express device

In order for the AirPort Utility on your iOS device to find the Express, both need to be connected to the same Wi-Fi network. By default, the Express will broadcast an unsecured wireless network with a network name of something like: Apple Network NNNNNN. Can you iOS device find this network?

Since cahnging FIOS Internet provider, which required a router to go in front of "AirPort" I have a blinking yellow on the AirPort and suggested editing in AirPort utility to cahnge from Double NAT to "Bridge Mode" my knowledge base is not clear as t

How do I clean up my new FIOS connection? I just cahnged ISP Fios and they reqquired a router of thier own in front of my AirPort Extreme. Since then I have blinking yellow light on the AirPort and AirPort utility keeps promting for an edit. Suggests canging from NAT to "Bridge mode". Obviuosly U have some internet or this post would not go anywhere, my knowledge base is not enought to feel comfortable with changing the settings. Correctly editing can be tricky, so how do I make necessary changes?

How do I clean up my new FIOS connection?
The FIOS router needs to be in Bridge Mode to prevent the Double NAT error from occurring when two routers are both fighting with each other for control of the network.
Unfortunately, the likely problem from the FIOS side is that FIOS support will either tell you that their router cannot be configured to operate in Bridge Mode, or if it can, they will not tell you how to do it.
But, it could not hurt to check with FIOS to see if anything might have changed recently in this regard, so your first call would be to FIOS support.
If you cannot change the FIOS router to Bridge Mode, the alternate plan would be to change the AirPort Extreme to Bridge Mode. If you are using the Guest Network feature on the AirPort Extreme at this time, that feature will not work correctly when the AirPort is set up in Bridge Mode.

Have 2 airport extreme base stations connected in chain. Airport utility shows slave unit without power. However, power is on slave unit, but status lights do not show up at all. Small green lights at each back port blink. Anyone have any ideas?

Have 2 airport extreme base stations connected in chain. Airport utility shows slave unit without power. However, power is on slave unit, but status lights do not show up at all. Small green lights at each back port blink. Anyone have any ideas?

Unfortunately, you are describing the symptoms of an AirPort Extreme with a failing (or failed) internal power supply.
As a last resort, try a Factory Default Reset on the AirPort Extreme as follows:
Power off the AirPort by pulling the power cord
Wait a minute or two
Hold in the reset button first, and keep holding it in for an additional 8-10 seconds while you simultaneously plug the power back into the AirPort
Release the reset button and allow a full minute for the AirPort to restart
Now try to configure the AirPort again. If you continue to see the same symptoms as before, the AirPort will need to be replaced.

Setting up airport express with airport extreme 802.11n with Airport Utilit

Hi,
I'm having trouble setting up my airport express(AX). Having recently bought the new Airport Extreme (AE) basestation, I can't figger out how to set it up to recognize the AX and allow me to stream airtunes. Previously I had the AX setup fine, but once I installed the AE, it no longer was recognized.
After resetting the AX, the airport Utility recognizes the AE and the AX as basestations, but I don't want to have to switch back and forth from wireless networks everytime I want to listen to music in another room. Airport Admin seemed to have been wiped out when I installed the AE, so any documents I've found on the Apple site refer to AA and not Airport Utility.
HAs anyone set up their AX on the new AE basestation?
thanks!
Rene

I am currently experiencing the same issue, except that I cannot for the life of me get the AX to:
1) Stop flashing yellow - numerous resets -soft to default.
2) The airport utility will not recognize it.
The airport utility sees the AE no problem, I got that up and running after a few restarts and am now able to log on to the network with my laptop.
I am new to Mac's and this is the 1st time I have tried to set up a network with one, I was excited about being able to use the AX to play my iTunes through the stereo in the other room and to hopefully use it to connect my X-Box to the internet. But I am starting to think that this is either above my skills or a fruitless endeavor. Any help would be most appreciated!
Thanks
Fairbanks

New Airport Express is not discoverable by Airport Utility

Hello,
After searching the forums for a while and not finding any posts that really address the issue I'm having, I've finally decided to create my own post.
I received a brand new Airport Express from my girlfriend for Christmas. I've finally gotten some time to set it up, but I seem to be having some issues with Airport Utility even seeing it. I haven't even been able to set it up because I can't access it. Airport Utility simply says that it cannot find any Apple Wireless devices and continuously asks me to rescan.
The first time I plugged in the Airport Express, it flashed the green light once like it's supposed to, then the light turned to solid amber for a couple of minutes, then started blinking. It still does this even after I do a factory reset.
Very rarely Airport Utility will see it, but it takes a lot of rescans before it finally does. When Airport Utility does finally see it after several rescans, I enter manual setup, enter my information and click Update. After I click update, I'm no longer able to connect to the Airport Express at all until I do a factory reset. Then it takes a lot of patience and several more rescans until I can finally connect again.
I first placed it directly below my desk, but have since tried many other locations throughout the house to see if it was location that was the problem. That is not the issue.
The intention is to have it join my current wireless network, so I do not have an ethernet cable plugged into it. I've tried plugging one in, but with the exact same results (Airport Utility still can't see it).
Any ideas as to what may be the problem?
Thank you!

Bob Timmons wrote:
If AirPort Utility is still having trouble "seeing" the Airport Express (AX), temporarily connect an ethernet cable from your computer to the AX. You may need to move the AX close to your computer for this and restart both your computer and the AX.
Once you have the AX configured, you can move it back to the desired location.
So I am able to connect to the Airport Express via an ethernet cable and configure it like that, but I am still unable to connect to it wirelessly. I wonder if there could be something wrong with the unit itself? After configuring it, I can't even see it in the Airport menu on the menu bar on top.
Any other suggestions?

New airport extreme not recognized by airport utility

I've got a 2011 MBP. Right now I have an older Airport extreme up & working with my Time Warner cable modem. When I tried to connect my new 802.11n airport extreme, I couldn't get it to stop blinking amber. First the airport utility told me that I didn't have a valid IP. The second time, after unplugging everything (cable modem & plugging it back in & resetting the airport, the utility couldn't find the router at all.
The manual says contact your cable company, but I got someone who's only solution was to go to system preferences/network & see if "airport" was checked. The second time after specifically asking for someone who understood macs,I got a bit more useful info, but it still doesn't work. I've unplugged everything countless times, reset the airport extreme, renewed the DCHP twice, restarted the computer & swapped out the ethernet cable. Still no luck. Any ideas?

http://support.apple.com/kb/ht3728

Inconsistent Airport Utility Indicators

Similar Messages

Maybe you are looking for