Inconsistent audio volumes with audio inserted via Properties panel and Audio menu

My course includes audio imported using the Audio menu (Import to Slide). On a few slides that have Captivate 6 Interactions, I had to include the audio using the Properties panel so the audio would play during the course of the entire slide and not pause when the Interaction appears.
The issue I'm having is, the audio inserted using the Audio menu plays at a lower volume than the audio inserted using the Properties panel. All audio files were recorded at the same time using Adobe Audition, so the volume level should be the same.

Yes, we are having the same issue, calling up a video on Netflix and having zero audio. Seemingly random, yet consistent. If we try the movie a week or month later, it still has no audio. We have a newer Television, have the HDMI cord, optical audio, state of the art. We're upgraded to the latest. So .....what's up Apple?

Similar Messages

HT1267 i have purchase an iphone but no audio and video are available with it .can i record video and audio by this device

i have purchase an iphone. but no audio and video are available with it .can i record video and audio by this device
<Personal Information Edited by Host>

Hello JessCastle,
Start with the article below to troubleshoot issues with the microphone on your iPhone. If none of it works then contact Apple Support to further help you out.
If your voice is too faint or sounds unclear using iPhone, or iPod touch
http://support.apple.com/en-us/HT203792
Take it easy,
-Norm G.

I purchased a file that advised it works with Illustrator intalled via extension manager and it only shows in my 'others products'? I cant even open the file in illustrator or in design? Help =)

I purchased a file that advised it works with Illustrator intalled via extension manager and it only shows in my 'others products'? I cant even open the file in illustrator or in design? Help =)

What's the product name please?

I have a clip with synchronized audio. When I trim a section of video it does not trim the audio. How do I trim both video and audio so that the clip remains in sync?

Why is FCPX not allow me to cut both video and audio tracks at the same time?
My separate synchronized audio does not trim when I trim the video. They are connected and synchronized.

fulei wrote:
The audio track does not edit along with the video. They go out of sync
Sounds like a different problem than your trim problem in the first post. If your problem is they drift out of sync, we'd need to knoow more about the project and clip properties – including how the audio file you're syncing to was created.
Russ

How to sync audio tracks with RED footage that has no reference audio?

So I shot a short film for my thesis project and the damn crew didn't record reference audio. We shot on a RED camera and had a sound guy with a shotgun mic. So we have crystal clear audio tracks from a separate sound card and tons of RED footage with abosolutely no sound.
Lucky we did use a slate, so I know I have to go one by one and manually sync all the audio with the right video tracks. Though I am unsure how exactly to do it. Once synced, will I have to edit from the timeline? How can I reimport the synced footage into a new project so I can edit from my media bin?

Hi PrimeSequence,
If you are having audio sync issues when playing back video in iTunes on your Windows machine, you may find the troubleshooting steps in the following articles helpful:
Apple Support: Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/ts1718
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/ts1362
Regards,
- Brenden

Front panel and audio header pinouts required for Lenovo 3000 J200p 9689

I have re-cased my computer as I love the PC but the Lenovo case is but ugly! The problem is I gave the Levono case to my mate before checking the pinouts. I assumed it would be in the tech manual but it's not. I have got the power switch connected so all I need are the leds and audio.
Would be greatfull if someone could take the time to do this for me.
Many Thanks.

Hi,
I have this same issue. Can we get a motherboard manual for 8705-G6U? I was able to figure out Front Panel power switch, PWR LED and HDD LED but audio is still a problem.
Thanks in advance.
Message Edited by thinker7 on 01-14-2009 03:45 PM

Properties panel and window options blank

This just started happening in Dreamweaver CS4 and I believe I just updated my Adobe on my machine, Windows 7 with CS4 installed for over a year or so now.
I have suddenly have no access to the properties panel, although it is there if I close the program, then open it fresh. As soon as I start working it becomes blank. Any insights appreciated. See screenshot:

I would try resetting your workspace by going to Window > Workspace Layout > Reset (name) Workspace
If that doesn't help, try clearing the program cache file: Deleting a corrupted cache file

How can I export an audio track with just the effect signal without the audio?

I want to export dry audio tracks and their effects signals as separate tracks. For instance a track with a reverbed snare would be one track with the dry snare and one with just the reverb.
I know from people who use Reason that it's just a box you need to tick, but I'm struggling to find out how to do it in Logic. Surely it must be a way?

I don't remember Reason being that straight forward, but the obvious way to go, is to mute all sends and bounce.
Then solo the reverb channel, in aux, checking it isn't shared by other sources, and bounce. You should have a dry and a reverbed signal, at your convenience.

Problem with mac osx 10.6.4 and audio firewire device

ok i use an edirol fa-66 , the problem is a random one , sometimes when i play music with itunes , logic or even the preview mp3 feature , the sound go downsampled and then stops, the only way to return is turn off and turn on the audio interface. I had this problem time ago only with logic 9.0.2 but with the version 9.1.1 everithing got right. Now with osx 10.6.4 the problem come back on all the audio programs (not only logic),so i have returned to 10.6.3, everithing works fine.
conclusion
in 10.6.4 there is something wrong with the core audio that is incompatible with edirol fa device.
maybe with osx 10.6.5 apple can resolve this?
i'm thinking to buy a motu device (they have their driver and don't use core audio)

up

Logic Pro X - How do I record my voice over existing tracks (via a mike and audio interface) without hearing those tracks on the speaker. I have headphones plugged into the interface but it doesn't stop in coming out of the speakers?

I'm new to Logic Pro X and can't work out how to record my voice over existing tracks without them playing over the speaker. I'm using a Sure mike through an audio interface and have headphones plugged into the interface?

Hi Kevin, what kind of audio interface do you have?

Use of parameter sets with prepared INSERTS via Oracle's ODBC driver 8.1.6.4

Oracles ODBC driver, version 8.1.6.4, allows for driver configuration of three different batch auto commit modes. If I select COMMIT ALL SUCCESSFUL STATEMENTS and cause my app to execute a prepared and parameterized INSERT statement that makes use of parameter value sets, all records up to the first record that causes an error are committed. What is happening? The driver returns only one diagnostic record, with SQLGetDiagField returning the index of the bad record through the [SQL_DIAG_ROW_COUNT] field. Regardless of whether SQLExecute executed successfully or not, the [SQL_ATTR_PARAM_OPERATION_PTR]/ [SQL_ATTR_PARAM_STATUS_PTR] buffers are not initialized by the driver. Even more so, the drive returns SQL_PARC_NO_BATCH for SQLGetInfo when [SQL_PARAM_ARRAY_ROW_COUNTS] is passed. Does anyone know if the driver fully or partially or does not support use of parameter value sets. If it is only partial implementation, ignoring the parameter operation and status buffers, in my opinion, greatly diminishes any real use of parameter value sets. Does anyone known if the above problems disappear with use of Oracles ODBC driver, version 8.1.7.3.0?
All help is greatly appreciated,
Chris Simms
null

<BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by Justin Cave ([email protected]):
What version of the database do you have on the back end?
Justin<HR></BLOCKQUOTE>
Oracle8i version 8.1.6. Looking at the specs that come with the ODBC driver upgrades, version 8.1.7.3.0 [which requires Oracle*i version 8.1.7] and 8.1.6.4, it seems that similar enhancements/fixes were made to both. I honestly do not know if what I am attempting is possible with either of the ODBC drivers. I really would prefer not to have to drop down to programming using OCI.
Chris
null

Audio issues with some full screen applications (game) and teamspeak with a 15" MBP retina display

While trying to play League of Legends in the lobby and loading screens i can hear everything but when i go in game i cant hear anything, and with teamspeak my teamspeak cant detect the input or output devices and i can hear everything else like skype and everything
Already reinstaled flash restored the system and took it to the apple store, this happened like for 2 days with youtube and they solved that but not the problem with the game or teamspeak

joshcali wrote:
actually.... it doesn't.
the 1920 is simulated, and apple doesn't recommend it.
Apple doesn't offer the option of full resolution (2880x1800) and says everything other than 1440 x 900 won't look as good as 1440x900.
so while you can set the monitor to 17" resolution (1920x1080) it has to simulate it on a 2880x900 screen and has to blur and reinterpolate elements to make it work
they've really messed it up for anyone wanting true HD resolution for professional reasons.
Indeed. Everything except 2880x1800, which is unavailable without SwitchResX, and 1440x900, which comfortably fits one pixel of the image into a four pixel square of the Retina Display, must be simulated or scaled. However, while the scaling is real, the 17" "simulation" looks as good, to my eye at least, as my wife's MBP 17". Going smaller will test one's eyes probably as much as Apple's scaling algorithms so the tradeoff for greater screen real-estate may turn out not to be as bad as we'd think. All I need is a MBP Retina Display and SwitchResX to find out...

Duplication Issues with Photo Sync via iTunes/iPhoto and Photo Stream/iCloud (Detailed Scenario Given)

Hi Everyone,
I'd like to share an issue I am having with photo syncing between my iDevices.
Here is how I USED to sync my Photos between my iDevices (no issues with photo duplication)
Note: In this scenario, I use iTunes and iPhoto on my Mac. iCloud and Photo stream have NOT been activated in this case.
1. Take photos via iPhone that saves in Camera Roll
2. After a month or so, I will connect my iPhone to my Mac.
3. Import my Photos in iPhoto and arrange Events and Photos in monthly sections and add some of them in a separate Albums (ex. Written Notes Photos) for easy access.
4. Once the import is done, iPhoto prompts an option to delete photos in my Camera Roll which I do as I like to start a fresh month with empty Camera Roll in my iPhone.
5. In order to access the Photos I have imported in iPhoto in my iPhone, I go to iTunes and sync all my photos to my iPhone. This syncs my events, photos, faces, albums as they have been arranged in iPhoto in my Mac. (I cant delete them in my iPhone once they are synced. I have to delete in my iPhoto and sync again to have similar setup in my iPhone which isn't a problem).
NOW I decided I don't want to manually go through all this process and went on to enable the Photo Stream ON in my iPhone and iPhoto with iCloud.
THIS IS WHERE THE PROBLEM ENSUES.
1. I Take photos with my iPhone that saves in Camera Roll
2. This automatically syncs with my Mac due to Photo Stream which a really convenient.
3. It syncs automatically to Photo Stream, Events, Photos, Faces section in the iPhoto and I put put some of them (notes) in a separate album.
THE PROBLEM:
The Photos does not show up in the Album, Events and Photos Folder in my iPhone. They are only shown in Camera Roll. So I thought to sync using iTunes so the new Photos will be arranged in their appropriate folder like it used to with my prior process of syncing. This worked, HOWEVER the photos in my iPhone started showing DUPLICATES! Apparently, one comes from Photo Stream (which, if I delete on my phone also deletes in all my iDevices) and the other duplicate is from the iTunes sync (this sets up my photos as arranged in iPhoto which is what i WANT to happen as Photo Stream does not sync them accordingly).
SOLUTION I AM IN SEARCH FOR:
I want to be able to take photos with my iPhone that automatically syncs in iCloud AND iPHOTO AS ARRANGED IN MY MAC (Albums, Events etc) WITHOUT PROBLEM OF PHOTO DUPLICATES.

Other folks have resolved similar issues by trashing the iPod Photo Cache.
Regards
TD

Page Properties Panel and CSS

In the Property Inspector I open the Page Properties dialog
box and expect to see within the category list : Appearance, Links,
Headings, Title/Encoding, and Tracing Image. All I see is
Appearance. Titel/Encoding and Tracing Image. Under Appearance
again I would expect to be able to select a page font, and it
attributes but it starts right off with background image and its
attrbute. Any ideas why the font info is missing?

Can you try again, please?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Marianne POST" <[email protected]> wrote in
message
news:evh6mb$nam$[email protected]..
> In the Property Inspector I open the Page Properties
dialog box and expect
> to
> see within the category list : Appearance, Links,
Headings,
> Title/Encoding, and
> Tracing Image. All I see is Appearance. Titel/Encoding
and Tracing Image.
> Under
> Appearance again I would expect to be able to select a
page font, and it
> attributes but it starts right off with background image
and its attrbute.
> Any
> ideas why the font info is missing?
>

Update to kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?

kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
(To Replace http://discussions.apple.com/thread.jspa?threadID=406147 if Accepted. )
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 7/12/2008)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or recieving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
Note: It has been noted that this file is now apparently included in Windows XP after Service Pack 2 and above.
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this
Between both of you.
At least one camera (Mac end)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
4:24 PM Sunday; December 7, 2008

kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
(To Replace http://discussions.apple.com/thread.jspa?threadID=406147 if Accepted. )
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 7/12/2008)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or recieving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
Note: It has been noted that this file is now just another link to the Standalone application. This might be an error by AIM or a newer version that includes the file.
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this
Between both of you.
At least one camera (Mac end)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:19 PM Friday; December 12, 2008

Inconsistent audio volumes with audio inserted via Properties panel and Audio menu

Similar Messages

Maybe you are looking for