Inconsistent characteristic value assignment

Hi
When I am trying to change the value of the characteristic for relase strategy ; the system is giving me error
"Inconsistent characteristic value assignment"
Kindly reply me

Check this answered link:
Inconsistent characteristic value assignment
Re: PO Release Strategy on Value Based

Similar Messages

Error at sales order: Inconsistent characteristic value assignment

Hi SAPians
There is a problem in variant configuration. I have configurable materials at sales order level with BOMs and super BOMs. When I am executing the scenario, not able to process further after selecting characteristic values for a configurable material. The error saying " Inconsistent characteristic value assignment". I checked all the relevant master data, every thing is okay. But I am not able to proceed further. Can any one provide some valuable inputs for this.
Raksha.

Hi
Did u create variant table (CU61) if not plz and try to make it by tick mark of Decision table..
u can check assignmebt consitance thru CU60 ..if there again blank plz maintain it manually..
basically wt happened during creation of Characteristics and assignment of value in value tab .. there is indicator ..which influence assignment consistance..
hope u may get clue.
correct me if i went wrong..
thanks
mk

Error in Release strategy : Inconsistent Characteristic Value assignment

Hello Gurus ,
Good Day ...
Need your help in release strategy in purchase order .
Thanks in advance .......
Characteristics characteristics value
R2R_PURCH_ORD_TYPE NB
R2R_PURCH_GRP1 001
R2R_PURCH_ORD_VALUE 0,00 - 1000,00 USD
1001,00 - 2000,00 USD
2001,00 - 10000,00 USD
Class assigned char
Z_CLASS R2R_PURCH_ORD_TYPE
R2R_PURCH_GRP1
R2R_PURCH_ORD_VALUE
Rel grp assigned class
PH Z_CLASS
rel grp rel codes
PH 1 -director/VP
PH 2 - manager
PH 3 - buyer
rel grp rel strategy
PH A1
PH A2
PH A3
Now in SPRO -
> define Release Procedures for Purchase ORder -
> Release Strategies
PH A1 Release Strategy 1 (rel. prereq , rel statuses, classification , rel simulation ) working fine
PH A2 Release Strategy 2 (rel. prereq , rel statuses, classification , rel simulation )
ERROR MSG: INCONSISTENT CHARACTERISTIC VALUE ASSIGNMENT
DETAILS :
You want to change the value assigned to a characteristic. However, the change causes inconsistency, so the new value is not allowed.
The inconsistency may be for the following reasons:
A precondition or selection condition is violated.
The characteristic is a single-value characteristic, and different values have been set by constraints, actions, or procedures.
In classification, inconsistencies occur when you change the value set of a characteristic if objects or classes have already been classified with values from the previous value set.
Procedure
Choose Inconsistencies to see what triggered the inconsistency. You can also use the explanation facility for more information.
Delete the values that triggered the inconsistency.
You can only change or delete a value or value set that has already been used to classify objects if you delete the existing allocations.
PH A3 Release Strategy 3 -
> SAME AS ABOVE
regards,
ajay

Hi,
Inconsistency due to different "VALUE" in the Release Strategy & "VALUE" present in the Release Characteristics . Check details with value assignment with designed Strategies.
Also keep following VALUE Release Characteristics for value
<=1000,00.00 USD
1000,00.01 USD- 2000,00 .00USD
2000,00 .01- 10000,00.00 USD
instead of (0,00 - 1000,00 USD,1001,00 - 2000,00 USD,2001,00 - 10000,00 USD )
Regards,
Biju K

Cu 50 Inconsistent characteristic value assignment Message no. C1821

Dear All
sorry I come from Taiwan,my English is not well
I have a question for SAP PP
I study Make-to Order Production with Variant Configuration
I read paper Make-to order Quotation Processing with Vaniant Procing(663)
and In accordance with the file operations
but when i According to cu50 display an error message：
Inconsistent characteristic value assignment，Message no. C1821
creat pland order in tcode co08 display an error message：
No valid BOM exists
i choices "no" display an error message：Error or warning occurred during master data transfer
I do not know how to resolve
Please help me thank you very much

Dear All
Thank you for your help
I found the problem
1.cu50 error message Inconsistent characteristic value assignment，Message no. C1821
ans: the paper Bast Practices Make-to-Order Quotation Processing with Variant Pricing(663) , page 85
Dependency name : YI_PC_YI_005_SELE_OPT
Syntax : $root.YI_004_ADD_OPT='01'
2.creat pland order in tcode co08 display an error message：No valid BOM exists
ans :
a.Tcode cu42 , in BOM application select SD01 for Production-General
b. IMG OPL8 BOM Application sele SD01

DMS - Inconsistent characteristic value assignment

Dear experts,
I've some DMS documents with an 'Inconsistent characteristic value assignment': two values for a single-value characteristic.
I want to correct those documents, but I don't to change AUSP directly. I've tried BAPI_DOCUMENT_CHANGE2, but without results.
Thanks in advance for any help.
Regards,
sb.

Thanks Charlie.
Yes, this is for PR release strategy. I have checked OMGQCK, there is no inconsitency related to char value assignment. But when I tried to assign char values in SAPL0ME2, there is hard error C1821.
I also tried to delete the char from the class but the error is still there. Any ideas?
Thanks
JM

Characteristic Value Assignment in Sales order

Hi Pals,
I am using the Variant configuration scenario in the sales order. My problem is, when ever i try creating a new sales order and enter a material, it suppose to display the Characteristic Value Assignment screen but for me it is showing the "Display Characteristic Values" Screen. Because of this i am unable to enter the data at the sales order level. what might be the problem for this case.
Kindly help me out in this issue.
Thanks & Regards,
Srinivas.D

Dear,
I hope the following link will help u in giving a good understanding of Characteristic values
help.sap.com/printdocu/core/Print46c/en/data/pdf/CACLCHR/CACLCHR.pdf
Regards,
R.brahmankar

How to get Characteristic Values assigned to the line item of Sales Order?

Hi,
I want to get the Characteristic Values( Variant Configuration )assigned to First Line Item of Sales Order.
I was using the Fn. Mod.: VC_I_GET_CONFIGURATION_IBASE,
this fn. mod. giving all the Characters but not the assigned characteristic values.
Is there any other way to find characteristic values of sales order.
Thanks,
vinayak.
Message was edited by: vinayaga sundaram

For example, please see this example program.
It lists the characteristic names, the values, and the description of the values which are tied to a sales document.
report zrich_0001.
* Internal Table for Characteristic Data
data: begin of i_char occurs 0.
        include structure comw.
data: end of i_char.
data: xcabn type cabn.
data: begin of xcawn,
      atwtb type cawnt-atwtb,
      end of xcawn.
data: xvbap type vbap.
parameters: p_vbeln type vbap-vbeln,
            p_posnr type vbap-posnr.
start-of-selection.
select single * from vbap into xvbap
             where vbeln = p_vbeln
               and posnr = p_posnr.
clear i_char. refresh i_char.
* Retrieve Characteristics.
call function 'CUD0_GET_VAL_FROM_INSTANCE'
       exporting
            instance           = xvbap-cuobj
       tables
            attributes         = i_char
       exceptions
            instance_not_found = 1.
loop at i_char.
    clear xcabn.
    select single * from cabn into xcabn
             where atinn = i_char-atinn.
    clear xcawn.
    select single cawnt~atwtb into xcawn
               from cawn
                 inner join cawnt
                   on cawn~atinn = cawnt~atinn
                  and cawn~atzhl = cawnt~atzhl
                      where cawn~atinn = i_char-atinn
                        and cawn~atwrt = i_char-atwrt.
    write:/ xcabn-atnam, i_char-atwrt, xcawn-atwtb.
endloop.
Regards,
RIch Heilman

Characteristic value assignment

Hi,
Can any body brief me on multiple values assignment in the chearacteristic?
I have go throug help but it is not clear to me hence explain with example.
Thanks,
Seema S.P.

Hi,
The multiple values assigment allows you to select more than one value using the Checkbox.
just enable the multiple values option and give the list of values in the Values tab.
add this Characteristics to a Class.
Add this class to a document.
Create a document (DIR) in that Additional data tab you can find the characteristics and that allows you to provide more than one value.
Regards,
MRK
(If u feel its useful pls reward points)

Retireve Characteristic values that are assigned to a grid

Hi All,
Am creating a query to display all characteristic values that are assigned to an AFS Grid. The selection criteria is the AFS Grid which will return the characteristic values. I used the tables J-3APGHD - AFS Product Grid entries and CAWN - Characteristic values for this purpose. However I am unable to join these two tables. Is there any other way to do it or an interim table that would help me link the above two tables. Thanks i advance.
regards,
Imran

Hi,
Could you tell me how did you solve this problem, please?
(Query between J_3APGHD and CAWN)
Thanks

Inconsistant value assignment.

Hi Everybody,
when iam entering the values for a character, it is showing the message as "Inconsistant value assignment. I have checked in CT04. The data type also showing as Numeric.
please advise.
Regards,

Hi,
Check the decimal point,Check the Template format of your character.Also the user profile say 1,2987766.78 or 1.23355667,34.
Regard,
Raj

Assign Object to class with characteristic values ?

Hi All,
I want to assign object to class with characteristic values. I found CL20N transaction for performing the same. Is there any BDC , BAPI to upload the same.
Thanks & Regards,
Navneeth K.

Hi,
try as below
    CALL FUNCTION 'CLAF_CLASSIFICATION_OF_OBJECTS'
      EXPORTING
        classtext            = 'X'
        classtype            = w_classtype "Class type
        language             = sy-langu
        object               = w_object     "Object Matnr + Batch
        objecttable          = 'MARA'     "As requirement
        change_service_clf   = 'X'
        inherited_char       = ' '
        change_number        = ' '
      TABLES
        t_class              = t_class
        t_objectdata         = t_objectdata
        i_sel_characteristic = i_sel_characteristic
        t_no_auth_charact    = t_no_auth_charact.
    IF sy-subrc <> 0.
    ENDIF.
*     Create with reference-----------------------
      w_objectkeynew = wa_inputfile-to_matnr.
      CALL FUNCTION 'BAPI_OBJCL_CREATE'
        EXPORTING
          objectkeynew    = w_objectkeynew
          objecttablenew = 'MARA'
          classnumnew     = w_classnum
          classtypenew    = w_classtype
        TABLES
          allocvaluesnum = t_allocvaluesnum
          allocvalueschar = t_allocvalueschar
          allocvaluescurr = t_allocvaluescurr
          return          = t_lreturn.
"or
BAPI_OBJCL_CHANGE              Classification BAPI: Change Assignment
Prabhudas

Assigning dependencies & procedures to characteristic value

Dear experts
Please how do i rightly assign a procedure created in a dependecy to a characteristic value.
I have created the procedure & dependency but this is not being calculated in the characteristic description

1. IN CU01 createa global dependency
2. in ct04 in the charc value area assign the dependency there.
let me know feedback
reg
dsk

Performance - Conversion of characteristic values to SID

Greetings:
Yesterday I load 556.000 record into an infocube.
No transformations of any kind. Direct assign for every infoobject. Very simple
It lasted 1 h 30m to complete the loading.
It started loading 7 datapackage of 50.000 records each.
I realized that 3 of those datapackage (#2, #4 and #7) lasted from 41:47min to 41:59min in the "Conversion of characteristic values to SID" task. The other 5 lasted ... seconds.
Any idea of that could be going on during this conversion?
I don't understant why some datapackages last so long and other don't.
Does anybody has any idea about this?
Thanks in regards.
Guillermo

Hi Daniel,
The SID generation is based upon the Dimension Table and Master data.
If you see the dimension table can be build with different types like:
one to many
many to one
many to many
one to one
So, if the dimension's for that datapacket data is many to many then it has to get all the relations and then it has to assign an SID.
If it is one to one then there will be no more work to be done by the system to assign the SID's
Hope you understood the back-end process.
With Regards,
Ravi Kanth.

BI-IP change characteristic value in FOX

Hello Guys,
i want to change the characteristic value in FOX.
Therefore the FOX runs through all char combinations to identify the highest
number for the char test.
This step works fine, but i cant write the value for maxloop in the cube.
If i try, only the old row is deleted, but i dont get a new row with the calculated value for maxloop.
the code looks like this:
DATA LOOP TYPE test.
DATA MINLOOP TYPE test.
DATA MAXLOOP TYPE test.
MINLOOP = 00000.
MAXLOOP = 00000.
FOREACH LOOP.
MINLOOP = LOOP.
IF MINLOOP > MAXLOOP.
MAXLOOP = MINLOOP.
ENDIF.
ENDFOR.
MAXLOOP = MAXLOOP + 00001.
{Amount, EUR, #, #, 00200, 00000000, #, 2007, #, #, #, #, #, #, #} =
{Amount, EUR, #, #, maxloop, 00000000, #, 2007, #, #, #, #, #, #, #}.
Any suggestions what is wrong here?
Regards
T. Mekler

Hi,
You have written
{Amount, EUR, #, #, 00200, 00000000, #, 2007, #, #, #, #, #, #, #} =
{Amount, EUR, #, #, maxloop, 00000000, #, 2007, #, #, #, #, #, #, #}.
But as per the statement MAXLOOP = MAXLOOP + 00001 the MAXLOOP conatins a new figure. Obviously there will not be any record in the cube for this value of MAXLOOP.
You are assigning this to the record with MAXLOOP = 00200, so system is assigning zero to 0AMOUNT for the record that is having MAXLOOP=00200 value.
Make the below corrections and test again:
DATA NEWLOOP type test.
NEWLOOP = MAXLOOP + 00001.
{Amount, EUR, #, #, NEWLOOP, 00000000, #, 2007, #, #, #, #, #, #, #} =
{Amount, EUR, #, #, MAXLOOP, 00000000, #, 2007, #, #, #, #, #, #, #}.
Regards,
Deepti

Issue in Custome FM of Characteristic Value

Hi All,
I have created Custom FM for possible values of Characteristic.
Its working fine in all transaction except CU60.
In Cu60 Transaction if user click on F4 for characteristic value My custom help popup is coming. when user select any of the value its populating in table maintenance. But Issue the issue is when user is saving those value those value are not saving in table maintenance.
Please tell me if I need to do any addition stuff.
I have created FM using below SAP Doc.
Function Module for Checking Values
In this field, you can enter the name of a function module for checking characteristic values entered by the user. The function module can be created in any function group.
The following restrictions apply:
The function module must use the standardized interface.
The function module name cannot have more than 27 characters.
This allows names to be inferred for further function modules: for the possible entries on the value assignment screen, and for copying language-dependent value descriptions:
Function module for possible entries
<function module for value check> + suffix "_F4"
Function module for language-dependent value descriptions
<function module for value check> + suffix "_DC"
Interface for Function Module for Checking Values
Import Parameters:
CHARACT_NO LIKE CABN-ATINN Internal characteristic number
CHARACT LIKE CABN-ATNAM Characteristic name
VALUE LIKE CAWN-ATWRT Value to be checked
Exceptions:
NOT_FOUND   Value not found
Interface for Function Module for Possible Entries
Import Parameters:
CHARACT_NO LIKE CABN-ATINN Internal characteristic number
CHARACT LIKE CABN-ATNAM Characteristic name
DISPLAY   Display values only,
   if DISPLAY = 'X'
ADDITIONAL_VALUES LIKE CABN-ATSON Additional values allowed
   if ADDITIONAL_VALUES = 'X'
   (if you want the possible
   entries dialog box to contain an
   additional line for entry)
MULTIPLE_VALUES LIKE RCTMV-ATLIS Multiple values allowed
LANGUAGE LIKE SY-LANGU Language indicator
DISPLAY_WITH_LANGUAGE   Display value with description
Tables
VALUES LIKE RCTVALUES Selected values
   When you call this table, it
   contains existing values.
   Deleted values have status 'D'
   in the table.
   New values have status 'I'
   in the table.
The function module must also let you display and select values using the possible entries pushbutton. To display possible entries, you can use function modules in function group SHL3, such as HELP_VALUES_GET_WITH_TABLE_EXT. The content is described in the function module documentation.
Interface for Function Module for Language-Dependent Value Descriptions
Import parameters
CHARACT_NO LIKE CABN-ATINN Internal characteristic number
CHARACT LIKE CABN-ATNAM Characteristic name
VALUE LIKE CAWN-ATWRT Value to be checked
LANGUAGE LIKE SY-LANGU System language
Exceptions
NOT_FOUND   Value not found
If you use this function module after the function module for checking values, the language-dependent description of the value is copied to the value assignment screen.
Note
Please note that the program code must be based on the predefined interfaces. If your program is not based on these interfaces, the program may terminate with a short dump.
Please note also that the function module cannot take into account any restrictions on allowed values that are due to inheritance or object dependencies, because the function can only read data that is already saved to database tables. The function cannot read current user entries.

I have Created two FM Function Module for Checking Values and Function Module for Possible Entries

Inconsistent characteristic value assignment

Similar Messages

Maybe you are looking for