Inconsistent preview after CS5 edit

I recently used CS5 (with ACR 6.7rc installed) to edit a file from Lightroom 4. When the resulting file was shown in Lightroom, the preview did not display all of the changes I made in Lightroom (there were 2 added layers, one a cloning layer, the second a Smart Filter layer applying Silver Efex pro 2). However, when I using the Develop module to display the image, it showed all of my changes!
More details: the image shown in the Library included the cloning changes, but not the BW conversion. Same image in the Develop module shows botht he cloning changes and the BW conversion. I also asked Lightroom to regenerate the preview for this particular image, to no effect.

Dorin,
Try it with another external edtor. The betas did it with CS5 and external editors(Noise Ninja, PTLens, Denoise, etc) but it is fixed for me with CS5.
With the external editors it will still do the blinking out number(Loading). This is with Win7 64bit.
Rich

Similar Messages

Previews after an edit in photoshop - bad color

OK, Monitor is calibrated. Images look fine in lightroom after import. Then I make some adjustments in the Develop module and pass the file off to photoshop CS2. I save the file and it shows up in lightroom as an (filename)-edit.psd. Great except that the color in the thumbnail and the preview is NOT the same as what it looks like in photoshop. If I reopen the image in photoshop it looks fine, but if I export the images from Lightroom it looks like the bad image I see in lightroom. All of the color spaces are set to ProRGB.
Anyone know what is happening?

You can also choose 'ZIP' Image Compression in both the LR and/or PS Save dialogue. If adding layers also choose 'ZIP' under Layers Compression. This will typically reduce the file size by ~25-50%.
5D MKII files
Raw 25MB
TIFF 100 MB
TIFF (ZIP) 75 MB
Another option is to setup a second editor using PS 32bit, assuming you have both PS 64 bit and 32bit installed. Don't make any radical Histogram changes in PS (Curves/Levels) using the 8 bit/color JPEG, or you may get some banding artifacts. It's usually better to make these adjustments in LR anyhow.
I have my LR4 2nd Editor setup to use PS 32 bit, primarily because some of my plugins are only 32 bit. I use TIFF 16 bit ProPhoto RGB for my second editor, but you can certainly use JPEG as below.

Preview Update after Photoshop Editing

I would think this would be a common question but I can't find the answer.
After I edit a photo from iPhoto 09 in photoshop, the preview of the photo in iPhoto does not update. I can double click on the photo and see the edits but when I zoom back out it goes back to the original state.
Any ideas on how to correct?
Thanks!

Be sure you're using Photoshop correctly from wihtin iPHoto:
Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
Click to view full size
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done. 3 - however, if you get the navigation window
Click to view full size
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements 9 the Saving File preferences should be configured as shown:
Click to view full size
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Click to view full size
NOTE: If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds.
OT

Photoshop CS5 edits not showing in Lightroom

Experiencing strange behavior and would appreciate any advice...
Am editing .CR2 files, then doing Edit in > Photoshop CS5 > Edit with Lightroom Adjustments and "Stack with Original". All goes fine until I save and the new image is now displayed in LR. If I want to do a subsequent edit to the now-stacked .psd file, using Edit in > Photoshop CS5 > Edit Original, then saving, those edits are not showing up in Lightroom. Strangest is that if I then do Edit in > Photoshop CS5 > Edit Original to the file again, my edits are there in Photoshop.
I think this is an issue with Lightroom updating / syncing its preview (I'm looking at these in both Grid and Loupe) so that I can't see the latest version of what I edited. Also, sometimes I can get it to update by changing zoom levels and having LR go back to re-recreate the preview (I assume). I have also seen this behavior (it's more obvious in this case) when doing B&W conversions and the preview keeps flipping back and forth from color to B&W.
I assume this is a bug, but is there any way to force the previews to update as a workaround? Don't really use the print module, but changes also appear to not be reflected in the Web module, so concerned about what my output will look like.
Thanks.

Well, just found one solution... Library > Previews > Discard 1:1 previews and then zooming in on each photo in the Library (Loupe) forced the update. This needs to get fixed!!

No thumbnails in finder/preview after exporting files as dng out of lightroom?

Does anyone have experience sorting out the issue of no thumbnails in finder/preview after exporting files as dng out of lightroom?
There are several conversations in the forum about this problem, but cant seem to find a solution.
Anyone know how to sort this out?

Thanks for your reply.
Mac does support previewing dngs in finder and preview. This has not been a problem before (besides when using my fujufilm compact camera, which mac now has updated the Apple camera for).
To answer your Q about dng files. Thats exactly what i do. I have work which involves communicating/transfering multiple lr -edited files to someone else whom further edits in ps. Not only that, I personally use dng as a way of storing my files. I suppose like to keep my files tidy and uniform.
Any mac users out there who has a a solution to my issue with previewing dngs?

Preview and Text Edit apps shut down in the moment i try to launch then (on Lion).

When i lauch one of this apps( Preview or Text Edit ) they shut down and an error window shows up, telling me to repport to Apple (what i have already done).
I want to know if i am the only one, and if this problem can be fixed.

After apparently loading Firefox, upon launching it I come to a screen which has a Google "fill-in-the-blank" in the center. The program did not go to its home page. When I attempted to delete the program so I could try again, I could not do so. Because the program thinks that Firefox is working properly it wants me to shut it down first. So, I am stuck with Firefox which is not working properly and not being able to remove it. Fortunately, I did not remove Internet Explorer. In any event, I can not send you a screen shot because I could never reach the home page.

Anyone has print out the iPhoto album book by apple after finish editing? May I check is the quality good? I have compiled my photo album book , choosen hard cover option , 100 pages , estimated cost is US150. Not sure worth to print out or not?

Anyone has print out the iPhoto album book by apple after finish editing? May I check is the quality good? I have compiled my photo album book , choosen hard cover option , 100 pages , estimated cost is US150. Not sure worth to print out or not?

All I can say is the books I've created as gifts to my children for their children were received with absolute joy and appreciation (each book chronicled in pictures the first year of each grandchild's life). Granted the sentimental factor had a lot to do with the recipient's enjoyment of the book but they were spetacular. The book with its glossy dust cover is a very impressinve way to present your photos.
As Larry has pointed out so many have posted here that they were very satisfried with their book and Apple is very good about correcting problems.
To make sure there are no errors in the book before you order preview the book as described in this Apple document: iPhoto '11: Preview a book, card, or calendar before you order or print it. If the PDF file shows no errors, either in text typos (my biggest problem) or in missing photos, etc., the printed book will be error free.
OT

I open a file - playback - the audio is there - doesn't appear in timeline, but I hear it, after 1 edit, the audio disappears. I have to reboot to get it back then it happens again. All suggeswtions welcome. Thank you, Randy

I open a file - playback - the audio is there - doesn't appear in timeline, but I hear it, after 1 edit, the audio disappears. I have to reboot to get it back then it happens again. All suggeswtions welcome. Thank you, Randy

Is your Premiere Elements 12/12.1 running on a Windows 7, 8, or 8.1 64 bit computer or a Mac computer?
What is the brand/model/settings of the camera recording your video?
Windows 7 64 bit PC
Footage taken from DVD through Adobe Premiere Elements
Are you sure about the Frame Width and Frame Height that you gave 720 x 484? Did you mean 720 x 480?
Yes, my err. 720X480
For the Frame Rate, was it really 29.97 frames per second and you rounded it off to 29 frames per second? Or,
is the frame rate really 29 frames per second?
If the properties that you just posted are representative of your source file, what project preset did you or the
project set for the project preset? If you are not sure, please tell us the readings for Editing Mode, Timebase, Frame Size,
and Pixel Aspect Ratio under Edit Menu/Project Settings/General.
Still having problems - haven't been able to edit project.
Thank you for your help.
Randy Klein

Adobe reader not working after cs5 install

adobe reader not working after cs5 install

Nobody can tell you anything without proper system info or other technical details like exact version info.
Mylenium

How do I stop my original photo from changing after I edit then save it in Raw 7

How do I stop my original image from changing after I save the edited version in Camera Raw 7. I want to be able to keep the original intact and
also have the edited version. Also, if I want to work the new edited version in the future I would want to also keep that old version.
Thanks for your help

Thanks for this great solution NoelHave a great day and weekend
Re: How do I stop my original photo from changing after I edit then save it in Raw 7created by Noel Carboni in Photoshop General Discussion - View the full discussion Another way to revert all the saved metadata changes back to defaults is to select the Camera Raw Defaults entry in the Camera Raw fly-out menu... http://forums.adobe.com/servlet/JiveServlet/downloadImage/2-6070597-543394/362-482/RevertS ettings.png -Noel

IPhoto for iOS removes the GPS exif data from the photo after an edit

iPhoto for iOS removes the GPS exif data from the photo after an edit
Using the iPhone camera, I take a photo and then I want to make the photo a little brighter.
So, I edit a photo using iPhoto for iOS and then save the photo back to the camera roll.
Now, I might want to see where that photo was taken via another app (like Photo Mapo) or on the map using the Photos app, or even the Mac iPhoto app.
However, the GPS data has been removed. Looks like all of the other exif data is still in the photo.
Why not just have a feature to remove the GPS data if the user wants? no reason to remove it for them.
The user explictily chose to have location services turned on so the GPS data would be in the photo.
Is this a bug?
Thanks,
Brian.

First thing to try is a reboot of your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPad restart. See if that fixes your problem.
None of my cameras has a GPS function so I never see that data in the info of a photo in iPhoto for iOS. But I do see the map choice to set a location for the photo. Perhaps a reboot will fix this for you.

Sneak preview sp11 java edition install hangs

I posted this in the NetWeaver forum originally but now realize this might be a more appropriate forum.
I am trying to install the sneak preview sp11 java edition to a brand new box. The installation hangs on the "Load Java Database Content" step. The last thing in the jload.log is:
08.11.05 00:24 com.sap.inst.jload.Jload dbImport
INFO: table J2EE_CONFIGENTRY created
It's been running for 24 hours now and has not moved off that step. The java.exe process is using 50% cpu so it apparently thinks it's doing something. I've seen the posts regarding errors with the install and the Timezone change fix, but I'm already in a timezone that has DST.
Any ideas?

I had the same problem. I tried reinstalling a couple of times, but the same thing happened - the installation was just hanging and using 100% cpu time.
As the installation had not been tested with JDK 5.0 I had installed the newest version of 1.4.2, namely 1.4.2_10.
Then, just for kicks, I uninstalled 1.4.2_10 and installed 1.4.2_08 - 40 minutes later I got the "Successful install" screen.
I hope this helps.
ps: it should be noted that I installed on a freshly installed Windows XP (and later on a freshly installed Windows 2003 Server - also without problems) with German regional settings, just to make sure - I have later reverted the regional settings to my locale.
Message was edited by: Rune Jeppesen

Usual preview instead of custom preview after canceling of step.

Hi.
I try to made workitem with dialog, like Form step. Macros u201Cexit_cancelledu201D used in method in case of user cancel form.
Also u201CAdaptation work item preview in Business Workplaceu201D function assigned to step.
SBWP preview shows screen from my preview function at first selection of step. But standard preview appear after execution of step when step canceled.
Is any idea how to show custom preview after cancellation.
Thanks in advance.

Hi again.
I repeat that error without programming.
Create new workflow. Add any small structure to container. In my case it has a type BAPI_DRAWKEY.
Add Form step.
In Form step:
Assign self as handler. Set «Action» = display. Generate new screen to the clear function group. On the tab u201CWork item Displayu201D set u201CAdaptation of work item preview in Business Workplace Function Moduleu201D equals SWL0_PREVIEW_DEMO_HTML (it from demo button).
Activate workflow and run.
Complete workflow.
Go to the transaction SBWP. Open folder Outbox -> Work items executed by me. Find and select test step.
Preview will show HTML from FM SWL0_PREVIEW_DEMO_HTML (u201CThis could be your own HTML document...u201D).
Press button u201CDisplayu201D and get out from step by button u201CBacku201D.
Preview will show usual form u201CTips & tricks: u2026u201D instead of HTML from FM SWL0_PREVIEW_DEMO_HTML.
What can I do to resolve it?
Thanks in advance.
Anton Ugarov

The approver does not show in the approval preview after saving sh. cart

Hi ,
I would appreciate if anyone can reply me for fixing the problem.
Problem: The approver does not show in the approval preview after the shopping cart is saved, however before saving the shopping cart it shows the approver in the approval preview. We are using two workflows: WS10000060 Auto approval and WS10000276- 1 level spending limit approval.
Details of the problem:
The following steps specify the problem in detail , it is applicable for both the workflows WS10000060 Auto approval and WS10000276- 1 level spending limit approval.
1.     Shopping created
2.     The approval preview shows the approver ( please see #1 in the attached document) before saving the shopping cart.
3.     Shopping cart is saved.
4.     After saving , Check status transaction shows the shopping cart in status awaiting approval
5.     The section approval shows No workflow started , application error occurred
6.     T.Code SWI1 shows the workitem created for the shopping cart but in error.
7.     The work item container does not show any agents
I would appreciate it anyone can reply as to how to fix it ASAP.
Best Regards
Pawan

Hi Disha,
I have synchronised through SWU_OBUF several times since yesterday , but still at the same place.
In the workflow customising - The only red entry which I have is for check entries from HR control tables under Mainiatin definition env. and Mainiatin guded procedure for gateway under guided procedure (new in SRM 5.0) .The verification workflow works fine . Also I think these entries will not impact the workflow functionalhese were red even in my earlier system .
SLG1 shows all green entries and there are no entries in RZ20.
I have specified task TS10008126 as general task as I want anyone who is identified by SLAapprover should be able to process the workitem and as per documentation I can specify this task as standard task.
What should I do.. , anything am I missing .
Thanks and Best Regards
Pawan

I'm getting this error after I edit photos 'nothing was imported. What is causing this?

I'm getting this error after I edit photos 'nothing was imported. the files or folder selected to import did not contain any supported file types, or files are already in this catalog.I have elements 13 using hp windows 8 laptop and never had this happen before.

Hello staceonbass,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Best of luck,
Mario

Inconsistent preview after CS5 edit

Similar Messages

Maybe you are looking for