Inconsistent update flags (Notification E C( 004)

Hi Friends,
     When I processed the order in CRM Online it got replicated to R/3
     and from R/3 Delivery and invoice got created and document is completed.
     The Issue is that the Bdoc which has to replciate the Delivery and Invoice back to CRM
     did not replicate and in SMW01 i could find the error against the Queue CSA_ORDER_4000*
     "Inconsistent update flags Message no. C(004" and
      in CRMD_ORDER I could see the error as,
      An error has occured in the system C23CLNT100 while copying the document
      Message no. CRM_ORDER_MISC 020
      Diagnosis
      Errors have occured while transferring the document into another system. Remove the error
      messages from the enclosed log.
      Transmission log
       Inconsistent update flags (Notification E C( 004)
     Please let me know if any one has faced this issue (I have already applied the OSS Note)
     and please tell me how to resolve this issue.
     Regards,
     Satish Kumar

Hi Satish,
I have same issue in CRM production system. Where you able to solve it? If yes, please share how you solved it.
Thanks,
Regards
Deepika

Similar Messages

Inconsistent update flags Message no. C(004

Hi Friends,
     When I processed the order in CRM Online it got replicated to R/3
     and from R/3 Delivery and invoice got created and document is completed.
     The Issue is that the Bdoc which has to replciate the Delivery and Invoice back to CRM
     did not replicate and in SMW01 i could find the error against the Queue CSA_ORDER_4000*
     "Inconsistent update flags Message no. C(004" and
      in CRMD_ORDER I could see the error as,
      An error has occured in the system C23CLNT100 while copying the document
      Message no. CRM_ORDER_MISC 020
      Diagnosis
      Errors have occured while transferring the document into another system. Remove the error
      messages from the enclosed log.
      Transmission log
       Inconsistent update flags (Notification E C( 004)
     Please let me know if any one has faced this issue (I have already applied the OSS Note)
     and please tell me how to resolve this issue.
     Regards,
     Satish Kumar

HiRika,
By using the program (T.Code SE38)
Program : CRM_STATUS_OBJECT_CREATE and execute the same
to update the status of the R/3 Document
Enter the Sales Document Number which you want to Update the Status.
After Executing the Same you will find the Object Status COI and COH will be be updated.
Once it is true Execute the Queues manually
You can get the Sales Document number from the Bdoc which got struck.
Hope it helps.
Satish

Inconsistant update flags

Hi Experts,
Creating a sales document in CRM sporadically apears message "C( 004 inconsistent update flags". My case is similar to note 747077, with two differences:
1) The error occurs sporadically
2) In note 747077 they use as distribution lock, which seem to be sistem status I1026.
We use user status NoDs that prevents distribution and has operations "to distribute" forbidden. (In user Status NoDs, I1026 is inactiv. )
Bdoc with status NoDs usually show messages:
CRM_ORDER_MISC022 - No upload into R/3
CRM_ORDER_MISC024 - R/3 adapter is called
In error cases the bdocs with status NoDs have only one message:
CRM_ORDER_MISC024 - R/3 adapter is called
Has anybody an idea what can solve the problem?
Is there a way to activate and desactivate sistem status I1026 in status profile?

Hi,
I would recommend to check all the Partners and Products, used in Order, already exist in R/3.
Secondly, controlling the System status Ixxxx can be done through User status.
Just set the System status u want against the user status in Customising:
SPRO > SAP Implementation Guide > Customer Relationship Management > Transactions > Basic Settings > Status Management > Change Status Profile for User Status
Hope this helps...
Kindly reward with points in case helpful
Sharif

Please Help needed - Inconsistent update flags error

Hello Experts,
I am experiencing an error in the Middleware and I am not able to find a solution.
When I create sales order in CRM, they get replicated correctly to R3. Nevertheless, I never receive the notification from R3 to CRM and the Bdoc remains in Intermediate status with the message 'ERP adapter is called'.
When I modify the sales order in R3, I receive a notification from R3 to CRM with the error 'Inconcistent update flags'.
Can anyone help me to fix this issue? Why I am not receiving the notification from R3 to CRM once the sales order is replicated?
Thanks a lot.
Regards,
Oliver

Hello Oliver,
This means that the BDoc is still awaiting a response from ECC.It is likely that an outbound queue in ECC is in stop mode or waiting mode. Can you please check the outbound queue in ECC?
The message "R/3 adapter is called" is not an actual error or problem, it is just a flow message saying that the flow has left CRM. In your case, the flow made it to R/3 where it has got stuck most likely due to some conversion error /an application error.
With report CRM_ODE_CHECK_CFG on CRM system check all necessary settings for data exchange of sales orders between CRM and R/3. Please check if application BC-MID is active in table TBE11 on R/3 side.
Thanks,
Rohit

How to update flag in multiple tables using custom sql DB adapter

hi all,
I have a scenario: I want to update flags in multiple tables in DB2. I have used toplink update only to update all tabless after creating relationships between them. But that approach is not working as it couldnot detect emmisions with DB2 and update the complete record with blank values in other columns.
So, i want to use custom sql now. Can anybody help in resolving the issue or in writing the custom sql.
Regards
Richa

Dear SeánMacGC thanks for reply,
But "a.changed" is not a field in GNMT_CUSTOMER_MASTER_CHG. what i am doing in this procedure is i am collecting bulck data and validating field by field from GNMT_CUSTOMER_MASTER_CHG with GNMT_CUSTOMER_MASTER table as their structure is same.. if v_name is not same as v_name_chg then i am setting changed flag to "Y" changed is "changed dbms_sql.varchar2_table" and updating GNMT_CUSTOMER_MASTER in bluck where changed flag ='Y'...
type custRec is record
n_cust_ref_no dbms_sql.number_table,
v_name dbms_sql.varchar2_table,
v_name_chg dbms_sql.varchar2_table,
rowid rowidArray,
*changed dbms_sql.varchar2_table*
i cannot use simple SQL as i need to validate field for each records with GNMT_CUSTOMER_MASTER_CHG and insert into log file as well.....
to run this procedure:
execute DO_DC_NAME_UPDATE_OTHER_TAB.DO_NAME_UPDATE_OTHER_TAB;
Thanks...

BB Z10 BBM Group updates and notifications not showing up in Hub?

BBM Group updates and notifications not showing up in Hub? The notifications are turned ON in Group settings. And all BBM notifications are enable in the Hub, still nothing shows up. Picture comments, addition, status updates simply dont show up. My device is on 10.0.10.58.
Any workaround?

vijaymalhan, in your Hub settings > Hub Management, do you have BBM set to ON?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Hello Sorry for the inconvenience, but I have a problem in Java I can not open files, audio chat, which type of jnlp after the last update of the Java 2012-004 Please help me in solving this problem.

Hello Sorry for the inconvenience, but I have a problem in Java I can not open files, audio chat, which type of jnlp after the last update of the Java 2012-004
Please help me in solving this problem.

Make sure Java is enable in your browser's security settings.
Open Java Preferences (in Utilities folder)
Make sure Web-start applications are enabled.
Drag Java 32-bit to the top of the list.
jnlp isn't an audio file format. It's just a java web-start program (Java Network Launching Protocol).

Include-updates flag

Does anybody know that:
          Corresponds the include-updates flag in the weblogic-cmp-rdbms-jar.xml file only to UPDATE SQL commands or also to INSERTs? In other words: When I create a new ACCOUNT and call a finder in the same transaction that should return this new ACCOUNT, will this work?
          Stephan

yes, it will include the inserts too.
          vasanthi Ramesh

How to remove appstore update badge notifications without iTunes, Cydia app etc?

Hi there, very simple Q - How to remove appstore update badge notifications without iTunes, Cydia app and other melarchy?

That's right

Updating flag using itab

Hi Guys
I need to update flag to X for all flag = I from my ztable. Ztable is a database table with many entries (10000's). I currently have code that implements this functionality but performance is very imp here so I need to fine tune the code, perhaps putting it in itab and modifying the entire table from it should work
This is what I have so far
update ztable
set flag = 'X'
where flag = 'I'.

Hi,
Please try this.
loop at itab.
move 'X' to itab-flag.
modify itab.
endloop.
modify ztable from table itab.
OR
loop at itab.
update ztable
set flag = 'X'
where kunnr = itab-kunnr
and vbeln = itab-vbeln.
endloop.
Regards,
Ferry Lianto

SIS update flag in Customer master

Hi,
Where can i find SIS update flag in Customer master level.
Regards
JACK

Hi,
Assign values in customer statistics group field in the sales area data -> Sales tab.
Regards
Edited by: Shiva Ram on Jan 16, 2008 1:34 PM

Material Type: Value Updating Flag

Hi
For a material type, is there a possibility that only the 'Value Updating' flag is checked and the 'Quantity Updating' flag is unchecked? Is this a realistic scenario? Any reall-time example for such a scenario?
In this case, is the material type considered as Inventory managed ?
What is the implication of checking the 'Value Updating' flag?
Does this mean that a Stock Account is associated with the material type?
Thanks for your inputs here in advance
Kind Regards
~P

Hi,
It is very well possible to have materials with value updation only.
It is useful when no inventory i.e no stock is to be maintained. Only value is the required.
For eg: Pipeline material is directly consumed. No inventory is required to be maintained against it.
Such materials are also called as non-stockable materials.
These materials will always be procured against an account assigment category in PO. The value is directly posted to Consumption Account picked via Acc *** Category during GR.
No stock/inventory account will be posted during GR.
Regards,
Komal

Trigger and Update Flag Table

I've recently started trying to automate around a dozen procedures. These procedures are set to run immediately after the necessary previous procedure(s) is(are) done.
What I am attempting to accomplish is a single generic trigger that will fire off each procedure when its parent procedures have finished firing. This will be accompanied by an update_flag table with three columns
PARENT_PRC----------------------CHILD_PRC----------------------FLAG
parent_prc_name1--------------child_prc_name1-----------------N
parent_prc_name1--------------child_prc_name2-----------------N
parent_prc_name3--------------child_prc_name3-----------------Y
Logic:
*1.* When a procedure fires it updates this table to set any rows in which it is the “PARENT_PRC” by updating the FLAG column to = Y.
*2.* The trigger will execute a child procedure if its flag (or in the case of multiple parent procedures; all of its flags) are set to 'Y'. This trigger is set to fire AFTER a table update on the UPDATE_FLAG table.
----a. I have to execute the procedure UFLAG in a job because I want the trigger to execute the procedure and then continue running immediately, rather than wait for the procedure to finish then commit. This way the trigger could start several procedures all running at the same time.
----b. I have made it an autonomous transaction because I needed the job to fire immediately rather than be queued, which required a commit within the trigger.
*3.* The last step is to set the flag in UPDATE_FLAGS back to 'N' for CHILD_PRC = '||uflag||' once the child procedure is complete.
----a. I have tried placing the update child_prc = 'N' in the trigger but it won’t allow a trigger that fires on update to update the same table.
----b. I want to avoid putting the update statement in all of my procedures because I would like the option of running these procedures manually for testing purposes WITHOUT effecting the update_flags table.
Number 3. is the key problem I have been having. Placing code within the trigger to update the update_flags table setting 'Y's back to 'N's once the procedures have fired causes a deadlock error.
I believe this is simply because the trigger is attempting to update a table which (upon updating) causes the same trigger to fire before it has finish executing.
How can I update the Flag table to reset the update flags back to 'N'?
Is there a different way of doing this all together?
Here is some code with dummy procedures that demonstrates what I have so far.
With this code, executing parent procedures should set the update_flag table to 'Y' for FLAG where procedure = 'parent_prc'.
I need to find a way to execute the child procedures AND set the FLAG column back to 'N' from the trigger.
ex. executing parent_1 should set update_flags.flag = 'Y' where parent_prc = 'parent_1' and thus execute procedure CHILD_A and CHILD_B.
create table update_flags (parent_prc varchar2(10), child_prc varchar2(10), flag varchar2(1));
insert into update_flags values('parent_1', 'child_a', 'N');
insert into update_flags values('parent_1', 'child_b', 'N');
insert into update_flags values('parent_2', 'child_c', 'N');
insert into update_flags values('parent_3', 'child_c', 'N');
insert into update_flags values('parent_4', 'child_d', 'N');
CREATE OR REPLACE procedure parent_1 as
BEGIN
update update_flags set flag = 'Y' where parent_prc = 'parent_1';
END parent_1;
CREATE OR REPLACE procedure parent_2 as
BEGIN
update update_flags set flag = 'Y' where parent_prc = 'parent_2';
END parent_2;
CREATE OR REPLACE procedure parent_3 as
BEGIN
update update_flags set flag = 'Y' where parent_prc = 'parent_3';
END parent_3;
CREATE OR REPLACE procedure parent_4 as
BEGIN
update update_flags set flag = 'Y' where parent_prc = 'parent_4';
END parent_4;
CREATE OR REPLACE procedure child_a as
BEGIN
dbms_output.PUT_LINE('CHILD_A Worked');
commit;
END child_a;
CREATE OR REPLACE procedure child_b as
BEGIN
dbms_output.PUT_LINE('CHILD_B Worked');
commit;
END child_b;
CREATE OR REPLACE procedure child_c as
BEGIN
dbms_output.PUT_LINE('CHILD_C Worked');
commit;
END child_c;
CREATE OR REPLACE procedure child_d as
BEGIN
dbms_output.PUT_LINE('CHILD_D Worked');
commit;
END child_d;
CREATE OR REPLACE TRIGGER MASTER_TRG
AFTER UPDATE
ON UPDATE_FLAGS
DECLARE
Pragma AUTONOMOUS_TRANSACTION;
BEGIN
DECLARE
job_num number;
uflag varchar2(1000);
BEGIN
 select MAX(case when COUNT(case when flag='Y' then 1 end)=COUNT(*) then CHILD_PRC else ' ' end)
 into uflag
 from update_flags
 group by child_prc;
 IF uflag <> ' ' THEN
 --update update_flags set flag = 'N' where child_prc = uflag --(line of code that causes deadlock error)
 dbms_job.submit (job => job_num,
 what => ' '||uflag||';'
 END IF;
 END;
COMMIT;
END MASTER_TRG;
execute parent_2;
execute parent_3;

>
I think I am getting my head around the transactional/trigger issue.
>
It doesn't sound like it since you are still talking 'triggers'. At any rate it is OP that needs to get their head around it.
OP doesn't even know what the entire process needs to be but has already decided that
1. a single generic trigger that will fire off each procedure when its parent procedures have finished firing
2. an update_flag table with three columns: PARENT_PRC, CHILD_PRC, FLAG
3. a procedure fires it updates this table to set any rows in which it is the “PARENT_PRC” by updating the FLAG column to = Y.
4. a job - I have to execute the procedure UFLAG in a job
5. I have made it an autonomous transaction because I needed the job to fire immediately rather than be queued, which required a commit within the trigger.
6. there should be an option of running these procedures manually for testing purposes WITHOUT effecting the update_flags table.
Fortunately OP had the wisdom to ask
>
Is there a different way of doing this all together?
>
Doesn't anyone design things anymore? Seems like everyone just wants to decide what the solution ought to be be and then try to force the problem to fit into it.
The first stage is the DESIGN - not the implementation details or technology to use.
The first design step is to outline, or flowchart, the PROCESS that needs to take place. Since OPs post lacks sufficient detail I will substitute my own 'guesstimations' to illustrate.
1. there are one or more 'parent' processes
2a. these parent processes are allowed to run in parallel as they do not interfere in any way with the processing done by other parent or child processes. (is this true?)
2b. these parent processes ARE NOT allowed to run in parallel as they may interfere with each other.
3. Each parent process can have one or more 'child' processes. (it appears that these aren't really children but rather processes that are 'dependent' on the parent or that must always be executed after, and each time that the parent executes.
So here are just SOME of the things that are missing that must be known before possible alternatives can be explored
1. Re item #2 - can the parent processes be executed in parallel? Or must they be executed serially? Will any of the parent processes be dependent on any other parent or child process?
2. What is the relationship between a parent process and its child processes? Is the parent always executed first? What triggers the parent execution? How often is it executed?
What if it is already executing? What if other parent processes are currently executing? What if one or more of its child processes are executing? What if the parent process fails for any reason - what action should be taken?
Based on what was posted a set of parent and child processes might need nothing more than: execute parent, execute child1, execute child2, . . ., execute childn.
3. What is the relationship between the child processes that belong to the same parent? Can they be executed in parallel (i.e. are they completely independent)? Or must they be executed in some particular order? What if one or more of the child processes fails for any reason - what action should be taken?
4. Will any other user or process be executing these parent or child processes? That could interfered with the automated stream.
5. What type of exception handling and recovery needs to be implemented in one or more steps of the processing fail for some reason?
Typically there is often one or more control tables (OPs flag table) to control and limit the processing. But the table would have status information for every process not just the children:
A. STATUS - DISABLED, ACTIVE, RUNNING, IDLE, ERROR
B. START_TIME
C. END_TIME
D. RESULT_CODE
The control table can be used by a parent or child process to determine if it is permitted to run. For example the first thing a procedure might do is check it's own STATUS. If it is already running it would exit or log an error or message. If that test is passed it might check the status of any dependent processes. For example it might check that its child processes are ACTIVE and ready to run; if a child was still running the parent would exit or log an error or message.
The control process would lock the appropriate control table records (FOR UPDATE) and would set the status and other fields appropriately to prevent interference by other processes or procedures.
Design first. Then look at the implementation options.

How to get away the Update Available Notification?

Hi everyone,
I have completely updated my OS X Mavericks, but since apple update the iTunes 11 to 12, i don't like the design as it won't match to os x mavericks since it make for yosemite( I update to iTunes 12 once but don't like it and make a clean install to reverse back, can reverse back without clean install?), and there will a Update Available notification keep show up, there is only "Update" and "Later" to choose from but there has no "NO" option since I don't want update my iTunes to 12 version(picture below), is there a way to get rid of the Update Nodification ONLY for iTunes 12 and allow for other application, I don't want to close mac app store update notifications, just want to disable for iTunes 12 update, it's annoying!
thanks for help!

You can hide the notification.
Launch App store.
Click the "Update" tab on the top.
Right click on the specific update and choose "Hide Update".
To reverse it,
App Store > Store > Show All Software Updates

Issue with updating service notification using BAPI_ALM_NOTIF_DATA_ADD

Hi experts,
I would be very grateful if anyone could help me out with this.
I need to update the object code damage code and cause code of the notifications (transaction iw22) through portal. For this I have made a z BAPI and am calling it through portal. Now for my notification type H1 the damage and the object part are mandatory and the cause part is not. Now while trying to update(through portal) any H1 type of notification which already has object part and damage part filled but cause part blank I am getting the error notification locked by EPUSER. When I run the same z bapi on R3 giving same data then error doesnt come and every thing is updated successfully.
Even from portal I am able to update other type of notification where either all damage cause or object part is blank or filled. This particular issue happens only the notifications having only cause part is blank.
The logic that I have used to update the notification where cause part is blank is I have called first ALM_NOTIF_DATA_MODIFY and have passed the damage code and object code table(notifitem) in its parameter so that damage code and object code can be modified(i havent passed the cause code table as passing empty cause code table(Notifcaus)to this bapi throws error) after calling this bapi i have called BAPI_ALM_NOTIF_DATA_ADD and in its parameter i have passed only cause code table(Notifcaus ) (I havent passed table having damage code and object code) . So on the successful execution of this two bapis i should get the updated object, damage and cause codes.
There is a sap note 1058895 which talks about the same issue but even after applying that note same problem is coming. We raised and OSS message to sap to but I guess it wont be of much help.
My observation is that after calling ALM_NOTIF_DATA_MODIFY as I am trying to call ALM_NOTIF_DATA_ADD for same notification so its throwing the lock error but the point is that why then from the R3 side this error is not coming. Are there any FM to enqueue and dequeue notifications like we have for employee numbers in HR module.
Regards,
Mehul

Hi,
Check out the thread below. It might be of help.
Re: update PM notification through fm/bapi
Also, post it in ABAP->General Form for a quicker response.
Thanks
Nidhi

Inconsistent update flags (Notification E C( 004)

Similar Messages

Maybe you are looking for