Inconsistent - Work Centre's Long-term Planning (KAKO-KAPLPL)
Hi Experts,
we're upgarding from SAP4.5 to ERP6.
I reviewed OSS note 950834, but it's not related.
We extracted from SAP4.5 Work Centre - Capacity Header - Long-term
Planning.
It's ticked (X) in CR03, but blank () in table KAKO-KAPLPL.
We loaded into ERP6 Work Centre - Capacity Header - Long-term Planning.
It's blank () in CR03, but ticked (X) in table KAKO-KAPLPL.
Please advise the fix for this issue.
Thanks,
Thomas
Dear Thomas,
I suggest you to check relevant OSS notes. Also creaete a OSS message for this issue.
thanks and regards
muru
Similar Messages
-
Long-term planning: planning details of work center capacity
Hi,
we need to know what is the effect on planned production orders (generated by MPS, transaction MD40) of the flag <b>“long-term planning”</b> in planning details of work center capacity (table name: RC68K; field name: KAPLPL). We made a test analyzing planned orders scheduling details in <i>Stock requirements list</i> (MD04) and in the <i>Planning table</i> (CM21) in both cases: with "long-term planning" flag set and without this flag for the same work center.
The schedule of planned production order on that work center is the same in the two instance.
Could you suggest us something?
Thank you.Hi Rudy,
Purpose for carrying out Long Term Planning to simulate impact of Future Demand Program on
u2022 Material Requirements
u2022 Capacity Requirements
u2022 Material Cost budgeting (activity by Accounts dept.)
T.Codes used -
u2022 Demand MD61, MD62, MD63
u2022 Scenario Creation MS31, MS32, MS33
u2022 LTP Variant Creation & Execution MSBT, SM37
u2022 LTP statistics Evaluation SM37, MS04
u2022 Data Set Up MS70, MSB&
u2022 Evaluation based on Set up data MCB), MCEA, MCEB, MCEC
u2022 Capacity Evaluation CM38
To Summarize -
u2022 In long-term planning, production plans for future demand programs are simulated using MRP runs with reference to the planning scenarios.
u2022 The parameters for the simulation in the simulation planning area are defined in the scenario.
u2022 The Evaluation of LTP Statistics enables identification of Material for which LTP processing was terminated.
u2022 The Data set for purchasing & Inventory Control enables reports for demand analysis
u2022 LTP run with setting for u201CLead time scheduling and capacity planningu201D enables simulation of capacity situation/overload on work centers.
Hope it is helpful to you.
Srini -
Long term planning,mid point scheduling,finite scheduling
Dear Sir,
Please explain the Long term planning,mid point scheduling and finite scheduling in simple words
thnx.Hi,
LTP: Long term planning used to simulate your future production plan. Based on your future production plan, you can check by simulation, loading the products requirements in the inactive planning version and defining the inactive planning version in the scenario and you can execute the MRP run. Then the system will create the capacity requirements and you can see the overloads. Based on this simulation run, you can include any new work centres and increase the manpower or increase the shifts.
Finite Scheduling: This will consider the real details, like the no of work centres and working hours per day and working days in a year and considering the existing loads. This is called finite scheduling. R/3 does infinite scheduling. If the capacity not exist also you can release the production orders.
Regards,
V. Suresh -
Excluding storage location from MRP run in Long Term Planning
Hi,friends,
In my scenario , i want to exclude storage location from MRP run in long term planning.When i set storage location MRP indicator "2" in SPRO and SLoc MRP indicator "1" MRP4 in material master, i can exclude the storage location after run MRP with MD01/MD02,and i can see the expected result in MD04.But in Long Term Planning scenario the storage location can not be excluded after run MRP with MS01/MS02,and the requirements list in MS04 include the stock in the storage location i want to exclude. i dont know if i miss something.Plz give me some advice.
Regards
JoeyHi,
Refer the OSS Note 208017 - LTP: Long-term planning and storage locations
==========================================================================
Symptom
In long-term planning (Transactions MSBT / MS01 / MS02 / MS03), the MRP indicator of a storage location for a material is not taken into account (material master, view MRP 2 [up to and including Release 3.1I] or MRP 4 [as of Release 4.0A]).
The storage locations excluded by MRP or planned separately are also planned in the plant segment.
Additional key words
LTP, MM01, MM02, MM03, master data, MRP indicator, LGORT ...
Cause and prerequisites
The MRP indicator for a certain storage location of a material is only taken into account in operative planning (requirements planning, MRP).
The long-term planning occurs exclusively at plant level.
Solution
This is no error. The system works as intended.
The individual storage locations should not be distinguished in the long-term planning, in order to perform a comprehensive long-term planning.
This is important, for example, within the kanban processing where the storage locations with kanban MRP are excluded from the MRP, but in spite of that should be included in the long-term planning.
==========================================================================
Regards,
Siva -
Implementing Long-Term Planning
Dear Guys,
Is that possible to implement Long-Term Planning (LTP) in SAP when there is no SOP module in the system. Would you please inform me the basic requirements or basic setup to implement LTP in SAP system.
Thank you in advance!Hi Payam,
This is always recommended to implement LTP if you have long lead times for some procured parts, bottle necks in capacities for work centers and most important to plan about budget required for the production of those parts.
The above things you cannot check with STP/MTP and perform changes after the STP/MTP runs. But this you can do with LTP with diffrent scenarios and compare it till you satisfy.
You can do the precosting of the parts and check what would be your future costing and plant budget.
You can transfer the requireemnst of the critical parts to vendors well in advance after LTP run and before running the actual planning for the entire year, so the vendors will be well prepared to supply you the parts.
You can also checks the capacities required for the production before the STP run.
If this is OK then please close this thread.
Regards
TAJUDIN -
Dear All,
I am trying to do Long term Planning. In my case I am not using SOP. Demand is entered into SAP through PIR (i.e. PIR).
I want to see how much load is there on all the resources available.
Please advice me how to proceed in this direction.
Regards,
Vivek SharmaDear Vivek,
Check with these steps,
1.A plannig scenario has to be created for a plant in T code MS31 & for the same Planning scenario
configuration settings has to be made in OPU5 for the planned orders for LTP.
2.Requirements has to be given in MD61 in an inactive version and also after giving the requirements
kindly remove the tick mark against version- active check box.
3.Assign this plan to the planning scenario in MS32,release it and ensure the planning file entries are
entered or created,the same can be checked using MS21.
4.After taking LTP simulation run in MS02(individual material) or MS01 you can see the simulated
planned orders obtained in MS04 T code.
5.These Simulated planned orders can't be converted into production orders or it cant be used for any
business confirmation purpose.
6. For capacity planning analysis,use T Code CM38,
Before that Ensure for all the work centers in CR03 which are used for operation under capacity header
you have included the check box for Long term planning,otherwise in CM38 you can't see any capacity
requirements data.
7.Before executing CM38,ensure under settings---> general you are giving the period settings properly.
Revert back incase of any more clarifications required.
Regards
Mangalraj.S -
Vendor's long term plans regarding actualizations
Hi,
Possibly we will decide in 2014 to purchase MBP.
It will be than the first Apple's product in our environment.
If it should run that way we expect to use the mbp for approximately
next 10 years.
How does the Apple's current long term plans conform with the above target
regarding actualizations (bug fixes, security patches) for
OS and all other on-board software of mbp version currently in sell?molom wrote:
dav7 wrote:
Oh, and the medium I want to use needs to scale high. Very high. Into the order of more than a decent amount of TBs... like, say, 40 or 50. Of course that nice, round figure wouldn't pop up out of nowhere the day I have my plans in order, it'd grow - slowly - over time. So not only do I need something scalable, I need something that can scale slowly.
So kinda like a NAS or external HDD type of solution, except one that doesn't use failure-prone media like HDDs. Unless there's a kind of hard disk out there that doesn't fail very "easily" and lasts in an order of years?
-dav7
I believe there is nothing that exists in the world, unless you pay huge money for Solid State Hard Drives. The only solution I see is using a bunch of rewritable double layer Blu-ray discs. I don't think there is any proper solution for what your looking for. Your looking for the perfect that doesn't exist.
I'm not sure how long SSDs will last and I don't think there is any reliable information out there, wether an SSD I plugin now will still work in ten years. Plus you would need one hell of a lot SSDs to store Terabytes of data. BlueRay is probably worse than DVD regarding reliability, until the manufacturers get more experience with them.
Am I the only one to see a pattern with dav7 opening threads looking for things which don't exist?
Last edited by Garns (2008-10-08 13:39:29) -
Capacity planning Long-term planning CM38
Hi,
I am using Long-term planning scenario. I have created 12 PIRs for 12 months from January 2010 to December 2010. I executed MRP in MS01 in Lead scheduling Mode.
There are 12 planned orders created for the 12 PIRs for the months Jan to Dec-2010. When I see the planned orders in MS04 the satrt and finish date for the planned orders are showing in respective months beginning.
But when I check capacity in transaction CM38, all the 12 planned order for Jan to December months are displayed in the month of January itself instead of the respective months from Jan to December and the work center is overloaded 199%.
Please suggest to solve this issue.
thanks and regards
MurugesanHi,
In customization for Capacity Planning you can define you own selection profiles to work with. You may specify further selection criteria in selection profile and enhance query speed from database. Slection profiles are assigned to overall profiles and overall profiles can be called by CM07 transaction. CM38 is also working over an overall profile which you may learn from SAP help. This can also be changed.
Also check OPC5 to limit max data for selection which might be useful.
Regards. -
Query on Long Term Planning (MS31)
During the creation of long term planning the following steps i followed before i am stuck at one point.
1)T code MS31
2)Planning Scenarion and detail
3)Long term Planning Radio Button selection
4)Planning period +Use Gross Lot Size (EX)
5)BOM Selection ID 01
6)Tab Planned Independent requirement details filled
Now in Plant TAB when i give my plant id the message is REQUIREMENT PLANNING IS NOT ACTIVE FOR MY PLANT CODE.
Message no. 61139
Please tell me how to make it active.
Thanks in advance
Rupesh JhaDear Rupesh,
Plz Refer to Mr. Mangalraj inputs on LTP
1.A plannig scenario has to be created for a plant in T code MS31 & for the same Planning scenario
configuration settings has to be made in OPU5 for the planned orders for LTP.
2.Requirements has to be given in MD61 in an inactive version and also after giving the requirements
kindly remove the tick mark against version- active check box.
3.Assign this plan to the planning scenario in MS32,release it and ensure the planning file entries are
entered or created,the same can be checked using MS21.
4.After taking LTP simulation run in MS02(individual material) or MS01 you can see the simulated
planned orders obtained in MS04 T code.
5.These Simulated planned orders can't be converted into production orders or it cant be used for any
business confirmation purpose.
6. For capacity planning analysis,use T Code CM38,
Before that Ensure for all the work centers in CR03 which are used for operation under capacity header
you have included the check box for Long term planning,otherwise in CM38 you can't see any capacity
requirements data.
7.Before executing CM38,ensure under settings---> general you are giving the period settings properly.
Revert back incase of any more clarifications required.
Regards
kumar -
Hi Gurus,
I am new to SAP,this my 1st query in SDN.
I have been given sales figures of last 5 years of particular organization and i have been told to create a long term planning report in SAP please tell me the detailed methodology of create a long plan for the next 6 months in SAP.
Regards
KrishDear Krish,
LTP is a planning tool,where simulated planned orders's are obtained for an inactive plan.
It will be more helpful from production perspective.
To carry out an annual planning or a rolling quarterly planning run you require information on the future stock and requirements
situation. This means you need to know how sales and operations planning influence resources. That is, whether the results
of sales planning can actually be produced with capacity on hand. If such information is available it is possible to decide at an
early date whether extra work centers will be required to cope with bottlenecks, or whether additional machinery will have to
be purchased to reach the sales target.
Steps for LTP:
1.A plannig scenario has to be created for a plant in T code MS31 & for the same Planning scenario
configuration settings has to be made in OPU5 for the planned orders for LTP.
2.Requirements has to be given in MD61 in an inactive version and also after giving the requirements
kindly remove the tick mark against version- active check box.
3.Assign this plan to the planning scenario in MS32,release it and ensure the planning file entries are
entered or created,the same can be checked using MS21.
4.After taking LTP simulation run in MS02(individual material) or MS01 you can see the simulated
planned orders obtained in MS04 T code.
5.These Simulated planned orders can't be converted into production orders or it cant be used for any
business confirmation purpose.
6. For capacity planning analysis,use T Code CM38,
Before that Ensure for all the work centers in CR03 which are used for operation under capacity header
you have included the check box for Long term planning,otherwise in CM38 you can't see any capacity requirements data.
7.Before executing CM38,ensure under settings---> general you are giving the period settings properly.
8.Use T Code KSPP to transfer the planned activity requirements for production.
Revert back incase of any more clarifications required.
Regards
Mangalraj.S -
Long Term Planning-Planning File Entry
Hi Gurus/Friends
In the long term planning after PIR with inactive version and creating Scenario, assinging versions, Plants,....then
during Release+Save it is giving the Result of Planning File Entries
Logically the system has suppose to give the Number of Planning File Entries in Propotionate to the Specific Planning Scenario number and materials inside
But it is giving for all the Materials inside the Plant
Is there any settings to restrict the Planning File Entry creation w.r.t Planning scenario during Release+Save
other than the solutions through Transaction MS20,MS22 and MSAB
(Because during Release+save logically it has to call the MS22 t.code and do planning file entries for the materials in that scenario)
Awaiting for reply
thanks
K.PrabakaranHi,
Please Refer Below SAP help .
*Releasing a planning scenario*
You first have to release a planning scenario before you can plan it in the long-term planning run. When you release the planning scenario, the system creates planning file entries for all materials in all the plants allocated to the planning scenario. There is a separate planning file entry for this purpose. This guarantees that your operative planning is kept completely separate from your simulative planning. This long-term planning file contains all the materials that are also contained in the operative planning file. After the release, every change relevant to MRP triggers an entry in the planning file as in operative planning.
Pradeep
Edited by: Pradeep Kumar on May 9, 2008 4:22 PM -
Extracting LTP (Long Term Planning) Data from SAP ECC to SAP BW
Hello all
Here is the task in hand. There is a standard report that Production Planners execute post their MRP/LTP runs. This report can be accessed through T-code "MCB)". The program in action is RMCB1200. I tried looking for any standard extractors but to no avail. I would be fine to know either or both of the following:
An extractor
All the primary tables involved ( I have found a few tables through the program but a list by some expert will help me understand that I have not missed anything significant)
Also, if anyone has done this before, how was your experience with the extraction in terms of extraction volume and performance.
Regards
GajendraAfter further digging, here is some information that I found out.
T-code
Program
BADI
MSEX
RMDMRPEXTRACT02
MD_SR_LIST_EXTRACT
This could possibly provide the data required. The program can be scheduled and the output can be managed by SPRO settings for Extraction Mode. I am running tests to confirm if it provides me the correct information and matches with MCB) output.
Here are some tables, just for reference:
LTP Tables: PLSC, PBHI, PLPT, MDTP, PLPR, PLPB
MRP Records:
MDKP
MRP Document Header Data
MDTB
MRP Table Structure (no data)
PLSC
Planning Scenario (Long-term Planning)
MDFD
MRP Firming Dates
MDVM
Planning File Entries
S094
LIS -- Stock/Requirements Analysis -
How to consider the Purchase Orders in Long Term Planning
Hi All,
I wanted to include the Purchase Orders of Finished Material in Long Term Planning.
I have selected the check box "Long-term planning: include firmed issues and receipts" in the Planning Scenario but after LTP run system is not considering the Purchase Orders of Finished Materials for Planning.
Regards,
Shailendra
Edited by: Shailendra Hadkar on Apr 5, 2010 12:41 PMDear,
Could you please explain usage of purchase orders for Finished product?
Regards,
SAP CONS -
I need to stock available qty at long term planing (ms05) not calculate some location that qty status nettable.
Example : Location yy stock onhand 100 EA (Nettable)
Location xx stock onhand 10 EA (Nettable)
MRP display stock available 100 ea but
Long Term Planning display stock available 110 ea (I need to display 100 ea same MRP because MRP can set config exclude from MRP)
Please advise me?Hi,
Can you make this Location stock XX as blocked or Restricted stock, then you will be able to exclude it from the Net requirement calculation.
By deselecting the Blocked Stock or Restricted use stock for avaialbile stock in Avaialble stock configuration. -
Long-Term Planning (PP-MP-LTP)
Do you know BI content for Long-Term Planning (PP-MP-LTP)?
Not that I know.
Often business people actually mean SOP (BC: 0SOP_PLANNING) when talking about long-term planning. I don't see any point in reporting LTP that is more like alternative MRP scenarios. It is operational and different scenarios easily get confusing in reporting.
BR,Tuomas
Maybe you are looking for
-
Renaming A File By Clicking?
What's the official way of renaming a file in OS X? In Windows on a PC you click the filename once to select it, then click it a second time to make the filename editable. What's the Mac equivalent?
-
As I'm frustrated with the search engine on the forum I thought I'd start a new thread. I spent about two days developing images from a shoot in LR2. Decided to backup my work...just in case... Well, the only way to backup your work is to close light
-
Problem with Dataguard Wizzard in OEM 10
Hi, I've tried to create a physical standby database of a 10gR2 instance on the same host (windows 2003 64 bits) through OEM 10, and I get an error message at the first step. I select "create a physical standby database" and I get this in french : "I
-
I have added a print button to each page of my 4 page form, but I want the print button to print only the current page the user is on. I have put the following script in, but this prints the designated page plus any subsequent pages. How do I print o
-
Is PS6 okay to run under Vista? The box states XP SP3 or Win7, but no mention of Vista. It opens but a couple of issues... main one being it won't open Canon 5Dmk3 RAW files, even after updating. Any ideas? Ta, T