InContext editing question

I have a template that's has a main content area and a right side bar. I have added the incontext tag and the tag_pagecontent to both content areas. This kind of works except editing the page with this template attached actually edits the content in the right column and save it to the template the the current page.
The main content area works as it should.
I couldnt get the repeating region to work either.
Can anyone please give advise.

Has anyone done this in BC. or is it possible

Similar Messages

  • Welcome to the Adobe InContext Editing Forum!

    Welcome to the Adobe InContext Editing forum. This is a place
    to get help with InContext Editing, post questions to other users,
    and share your impressions and feedback with the team at Adobe.
    We’ll be checking in as often as possible to provide answers
    to your questions and point you in the right direction.
    Be sure to check the
    Frequently
    Asked Questions (FAQ) page as well as previous topics on the
    forums. The FAQ will be updated regularly with new information, so
    that should be your first stop when you have an InContext Editing
    question. If you’re just getting started with InContext
    Editing, be sure to check out the product tutorials in the
    Developer
    Center.
    Your comments and suggestions will help us shape the future
    of this service, so we’re looking forward from hearing your
    thoughts!
    ‐ The InContext Editing Team

    CAN ANYONE HELP PLEASE
    1. CTRL E has never worked and I have always edited my site via a link that my web designer has given me ,I don't get an error message just nothing happens,  any ideas?
    2. When I go through the link given to me by my web designer to edit the site the site appears but everything is smaller, font boxes etc, and not the correct size, I can edit ,however when I then exit editing and  check to see if my site has changed nothing has .
    Viewing the site outside of incontext editing all is normal, correct size etc , it is only when I'm in editing that the site appears different and not right.This is a recent problem and all  ( apart from CTRL E )  has been fine.
    Its almost like I have 2 websites one out here and one in incontext editing , any suggestions
    Many thanks
    Rik

  • Business Catalyst Help | Defining InContext Editing editable regions using any code editor

    This question was posted in response to the following article: http://helpx.adobe.com/business-catalyst/partner/defining-incontext-editing-editable-regio ns-1.html

    This is what I meant by shape.
    Normally, I drag out a rectangle with Muse,then set it's background fill so that it can turn in to a object which I can change the states for the button. I published my site with several this kind of links and I want to change it whenever possible in the in broswer editing. However, at first, when go to in browser editing, this object is completely not editable. After I added in the attributes of the Editable Regions,
    <div ice:editable="*"></div> I get an full editable functions.
    For example in my site, I have a rectangle with an image background to it,with an external link. And after I added the
    ice:editable="*" in the div tag,I got to edit my so called "button".
    Keep in mind that this had a link to it.
    After I click edit, a full control showed up, so I try to select the phot and insert link ,hoping that it could add a link to the photo.
    However, after I specifiy the adress, the photo is gone and a text link is left behind. I can still add back in the photo but I just can't make it a linked photo.
    And what's eventually left behind isn't the linked photo, but a linked text.
    The main question I'm wondering is that if I'm able to change the link of a image through in broswer editing,or the link of a regular shape like a rectangle, so that I can always update the link of the objects through buisness catalyst and when user clicking the photo/shape, they can be brought to an adress.
    But it seems like I only can change the link for a text.

  • Validating Pages that use InContext Editing tags

    When will be possibile validate the pages with InContext Editing tags, when running it through the W3C validator?

    Hello SallivanV2,
    Here are a couple of links to unobtrusive Spry Data samples:
    http://labs.adobe.com/technologies/spry/samples/dom_utils/unobtrusive_spry_data.html
    http://labs.adobe.com/technologies/spry/samples/dom_utils/unobtrusive_spry_data2.html
    But I think you might be better off posting the question in the Spry Framework for AJAX forum, since I'm certainly not the foremost expert on Spry:
    http://forums.adobe.com/community/adobe_labs/spry_framework_ajax_prelease
    I hope this helps!
    Best regards,
    Corey

  • Incontext Editing Sign in Error For Valid Users

    I set up two incontext editing users as publishers and they
    worked fine yesterday. Today they get SIGN IN ERROR , YOU ARE NOT A
    REGISTERED USER OF THIS PRODUCT. PLEASE FOLLOW REGISTRATION
    STEPS..."
    On the Admin panel for these users are listed correctly as
    publishers. Yes they checked the spelling and case. NOT WORKING! We
    need this working ASAP.

    Hello hmcom,
    Looking at your URL, I've noticed that both
    http://baltimorecarpets.com
    and
    http://www.baltimorecarpets.com
    are registered to the InContext Editing service. InContext Editing
    sees them as two separate sites and the users associated with them
    are not shared between sites.
    The problem that you have might be caused by the fact that
    the publishers have been invited for one of these sites, but when
    they try to login they are using the other URL (with or without the
    'www' part). You should keep a single site registered (the one that
    has the publishers invited), and delete the other one (using the
    Remove website button from the InContext Editing Portal). Also, you
    should instruct the publishers to
    Please let us know if you have any questions/problems.
    Thank you,
    Florin

  • Incontext editing and templates

    Hi
    I´ve been trying to find documentation about the
    interaction between ICE and regular Dreamweaver templates without
    any success. Is it still possible to edit master templates locally
    and change e.g. a menu for a complete site even if some pages has
    been edited via the ICE interface online?

    Hello Simon,
    InContext Editing regions can only be applied (on child
    pages) on regions that have been marked as editable in the template
    – the .dwt page. On the other hand, only the modifications
    that are made in Dreamweaver outside the template regions (in the
    master .dwt file) are propagated to all child pages. Thus, when a
    change is propagated, it won’t interact in any way with the
    sections of the page that were modified by InContext Editing.
    So, if the menu you want to change is not in an editable
    region (in the template .dwt page), everything should work just
    fine. The change will propagate to all pages based on that
    template, and modifications made via InContext Editing will remain
    intact.
    Also, as a general rule of thumb, before modifying the master
    template, you should make sure to download/"get" the most recent
    version of the site from the server. Additionally, if your client
    is updating the site via InContext Editing while you are making
    changes locally in Dreamweaver, you will overwrite any changes your
    client made when you upload the site again.
    Please let me know if this answers your question, or if you
    need clarification.
    We intend to provide a tutorial on working with Dreamweaver
    templates in the near future. I will post an announcement in the
    forums when this is available.
    Best regards,
    Corey

  • How do i remove incontext editing to allow contribute to work

    Hi, I am hoping someone maybe able to help...
    A while ago I put a site together at applied incontext editing regions. After being notified that it will no longer work in May this year, I decided to purchase contribute and went through the labourious task of removing all incontext editable regions and replacing them with normal editable regions.
    I have launched the site in contribute to test that everything works and it keeps coming up with 'You can't edit this page in Contribute because it has "Adobe InContext Editing" region(s).
    This is on almost every page on the site but two which it allows me to edit. I have gone back to the Dreamweaver file and checked through the code, I am certainly no code expertI have compared it to sites which didnt have the InContext applied to it... I am baffled
    Can anyone shed any light on the situation?
    Much appreciated
    Naomi

    For anyone that has a similar problem....
    I have now sorted the problem - my dreamweaver was not updating the server copy. I used FETCH as a secondary option by dragging and dropping the files. It updated the files and its now working! YAY!
    I had to make sure all incontext code was removed at the top of the code there was a line as well as along side each editable region. I even took out the editable regions and replaced them with normal editing regions (not Incontext).

  • How do I remove "ALL" incontext editing code?

    Hi, I am hoping someone maybe able to help...
    A while ago I put a site together at applied incontext editing regions. After being notified that it will no longer work in May this year, I decided to purchase contribute and went through the labourious task of removing all incontext editable regions and replacing them with normal editable regions.
    I have launched the site in contribute to test that everything works and it keeps coming up with 'You can't edit this page in Contribute because it has "Adobe InContext Editing" region(s).
    This is on almost every page on the site but two which it allows me to edit. I have gone back to the Dreamweaver file and checked through the code, I am certainly no code expertI have compared it to sites which didnt have the InContext applied to it... I am baffled
    Can anyone shed any light on the situation?
    Much appreciated
    Naomi

    I think I can see the problem! - I have updated the file in dreamweaver but it
    is not updating the copy on the server when I upload it...
    I can see the code that I have deleted still showing at the top of the page - I just cant get it to refresh!
    I will try doing it with fetch.....
    Just done it with fetch and it works! - Dreamweaver will not refresh the server copy.

  • Error Message: The Adobe InContext Editing service is currently unavailable

    Hey Folks,
    For the past week, my client is getting the folowing error message when he tries to log in:
    The Adobe InContext Editing service is currently unavailable.
    We are sorry for any inconvenience this may cause you. Please try again later.
    However we can access the editor from another computer without without problems.
    He is in a different country and he had been using the editor for quite a few months now.
    Have the minimum requirements changed?
    Thanks,
    [email protected]

    That's correct Corey.
    The client is in Cyprus accessing the editor through a Firefox browser, which he had been successfully doing for some time now.
    His representative, using the same login and password in Canada is able to access the editor fine.
    I've since sent him a seperate login invitation
    I've asked him to try another browser / computer.
    update his flash
    He said his flash wouldn't update, so I don't know if it's an issue with his browser, computer, or user.
    I'm waiting on the other two action items.
    Thanks for your involvement.

  • InContext editing error: This region contains content with dynamic behavior added..

    We just set up a web site with InContext editing following the procedures in Business Catalyst documentation to do that. But now when we go to the administration section of the site, and turn on InContext editing, it won't let us update the text. We receive an error message:
    "This region contains content with dynamic behavior added..."
    Does anyone know what causes this problem, and how to fix it?

    Hi,
    InContext Editable (ICE) regions can only contains static areas like text and static  assets, it cannot wrap around javascript – populated areas or dynamic content like slideshows. (most likely causing the error)
    ICE can edit only static page content such as regular HTML content. It cannot edit any element that is dynamically updated for example a div (or another element) which is manipulated (created or its contents are modified) by JS– populated areas or dynamic content like slideshows. It cannot edit menus, content holders or content outputted by system modules or tags either.
    By default, on a page that has no ICE editable regions defined the editor attempts to find any regions you might want to edit and if possible make them editable. If it does not find the correct regions you want to edit you will need to explicitly define some editable regions.
    Refer to this article on Defining InContext Editing editable regions - http://kb.worldsecuresystems.com/838/cpsid_83855.html?bc-partner
    Hope this helps!
    -Sidney

  • InContext Editing Too Slow

    Hi Folks,
    Love the concept of InContext editing but I don't think it actually works!
    I am only working on a simply HTML page with one other user. It takes forever to do anything.
    clicking the edit page button: 23 seconds
    clicking the done button: 56 seconds
    Clicking the publish button: 25 seconds then clicked ok and it took another 47 seconds.
    This is the 3rd client I have tried this product on. Each time we have found it a great solution until we try to actually work with it. It's just way too slow so we stop using it.
    I tried the Adobe demo pagehttp://incontextediting.adobe.com/demo/includes/ice/ide.html#page=news.html. It's supper fast no issues at all.
    Is there some trick to setting it up that I don't know about?
    I spent an hour in total this morning with tech support. 25 minutes on hold, then I spent more time actually going through license numbers then talking about my problem. They just told me that Adobe does not support InContext Editing. I was told to go to the support portal and put in a ticket. I went there, the support portal doesn't list InContext Editing in the list of support issues. What gives?
    Thanks for any help you can provide
    Sylvia

    Hi Tom,
    Here is the page http://webviewdesigns.com/haiti_earthquake_relief/includes/ice/ide.html#page=haiti_news_ja ckie.html
    I'm using Safari (MAC PRO) and my client is using Firefox (Windows XP)
    I've had the same issue before with client's on other browsers and desktops, servers configs.
    The page is a news page  for a Haiti relief site mini site. It's is inside my work site which is pretty big, could that be an issue?
    I've attached it for you to look at.
    Thanks
    Sylvia

  • InContext Editing not showing "edit page" button

    I made a site for someone using dreamweaver and defined areas as editable regions.
    I've used InContext Editing before and found it really easy with no problems until now. When I log in from my computers (varrying between 3 different browsers and 2 different operating systems), it works just fine.
    At the top I see exactly this:
    There are two rows at the top, and I can click "edit page" and it works perfectly.
    When the person I made it for logs in, he see the top row... like this:
    Clicking "Edit Site" seems to do nothing for him (well, me neither, but I can just hit edit page)...
    I can't check what's going on with his computer because I don't live where he lives, but I had him make sure he had the most recent version of flash, and he does.
    Does anyone know of any common problem with this? Does he have too old of a browser? Is he disabling something on his browser that's blocking the second row?
    I've googled this pretty thoroughly and can't fine anyone that has had the same problem

    Assuming here that you have set up ICE regions on that page...
    And that he "accepted" your invitation to do ICE.
    Z

  • InContext Editing disappearing

    What could cause InContect editing to just shut down? I inserted it in many sites successfully. However, in this site I log in, and after a second or two InContext editing shuts down without error message. Most pages have a litte Flash file to play background music. I removed that on the "Venue" page to see if that is causing the trouble but it is not. Any ideas?
    www.awbhst.orghttp://www.awbhst.org/index.php /index.php
    Thanks,
    Gudrun

    I found the answer myself. I didn't know it was a Microsoft server which did not support php. Although the pages worked fine (I had only php extensions and no other code), InContext editing crashed. I changed the file extensions to htm and now it works.

  • Adobe InContext Editing on Intranet Sites

    Hello,
    I am a devleoper and working on our organizations site and many people need access to edit certain areas of the page with no experience at all. I love the idea of InContext but not sure how i can get it to work for this. As any organization, we have a very secure intranet environment. Can we purchase a stand alone of in context? Is there ways to do this? IF not can anyone suggest a product that does. Thanks.

    Hello belltek1,
    InContext Editing does not currently support editing pages of intranet sites. InContext Editing can only edit public sites. (here is a related post about this: http://forums.adobe.com/message/28496)
    Best regards,
    Corey

  • Dreamweaver CC and incontext editing. No tools anymore?

    Hey,
    I've just updated to Dreamweaver CC to find out that the tools for integrating incontext editing tags into a page have been removed. I always found these tools extremly helpful for me as designer as well as I found incontext editing a major selling point for my clients. Actually I was hoping to get more Business Catalyst integration in CC not LESS.
    Is there any way to get back these functions as extensions? Or will we get new tools for the new editor (which is still in beta) in a future version of DW CC?
    Regards
    Tim

    InContext editing in DW was a solution unto itself but Adobe stopped supporting it officially as an external plugin and decided it would exist solely on Business Catalyst.
    BC's DW integration does not include inserting ICE like they do for modules and other tags in your layouts which is why you can't find any way to do it inside DW.
    Furthermore, ICE is undergoing an overhaul and the next Gen version of ICE is still being worked out. I wouldn't use that version yet for clients full on just yet but you can read more about the next gen version of ICE on BC at http://forums.adobe.com/docs/DOC-3201
    Basically, it's just some markup that you add to your HTML elements in your web page or page template.  You can also use the new ICE in BC's Email Campaigns so that your clients can create new HTML email campaigns and edit the content of your email template where you want them to or add/insert new repeating regions that you setup for them.
    Here's more about the ICE in the email campaigns: http://forums.adobe.com/docs/DOC-2862
    I don't think you need to worry about including the ICE javascript assets like you used to with the original ICE... if you add the markup to your html or email campaigns it should work out of the box.

Maybe you are looking for