InCopy CS5 crashes when clicking in text view

Hi folks,
I am running into a reproducable bug on and on:
Environment is as follows:
InDesign CS5 - Layouttool
InCopy CS5 - Editor's Tool
All "hosted" on woodwing enterprise 7 Server
My Case:
I have an InDesign Layout with two pages. On both pages is text.
I checked in to woodwing server the texts from both pages into one article Element.
When I check out the Article with InCopy, everything seems to work fine until I click into the text section that was not activated before in textview Mode (Means changing between the two sections). Then InCopy crashes each time.
When I am doing the same in Layout view, no crash occurs!
Any hints?
TiA,
Demski

I've seen a couple of reports of this, and only on recent versions of Snow Leopard. We're looking into it.

Similar Messages

  • DW CS5 crashes when switching to split view

    I have just checked other comments in the forum but none seem to really fit the issue. The moment I use the code for a page and switch to split view, DW crashes. It works perfectly with smaller HTMLs (e.g. HTML emails) but starts playing up as soon as I try to work on the code for a page.
    Any solutions.. ?
    Thanks!

    This is a long standing bug, that for some reason Adobe can't seem to fix. It started with CS4, and remains in CS5.  Typically when looking at certain .aspx pages, when switching from design view to split view Dreamweaver will crash. Anyway, thanks to some investigation back in CS4, and a keen Dreamweaver user (jplaguna) we can all get back to working normally.  I thought I would repost this for anyone struggling with the issue.
    The problem is with Dreamweaver's "Translators" - whatever those are?  Anyway, you simply rename that folder and your problems go away.
    Sorry to hear that you've been having this problem. I'm glad that you found a way to work around the problem.
    Translators are the code that recognizes certain pieces of server-side code so that you can select and manipulate them in DW. Turning them off disables features like Server Behaviors. Also, you can be more strategic by simply renaming the Translator for ASP.Net here:
      c:\Program Files\Adobe\Adobe Dreamweaver CS4\configuration\Translators\ASP.Net.htm
    Rename it to something like:
      ASP.Net.disable_htm
    Then you'll need to restart DW. This will disable the Translator for only ASP.Net, not all of the other Server Models.
    Can you post a .zip file with a page that causes the crash? I didn't see one in the original forum thread.
    Hope this helps,
    Randy Edmunds
    Dreamweaver Development
    Adobe Systems, Inc.

  • Premiere Elements 7 crashes when clicking/adding text.

    First post after being an Adobe user for several years so I can't complain. :-) I purchased Premiere Elements 7 a couple months ago and it has worked very well.
    I am now having a problem when attempting to add text. I tried adding text to a new project and get the message, "Adobe Premiere Elements has encountered a problem and needs to close. We are sorry for the inconvenience."
    I then opened a finished project and clicked the text on the screen and got the same message. So it occurs when trying to add new text or editing existing text. I have tried everything outlined in a post on what to try when you are experiencing problems.
    The specs to my 2002 Sony VAIO are below. Yes, it is old, but has been a workhorse during the last several years producing literally hundreds of videos. Any help you can provide is much appreciated.
    Windows XP Service Pack 2
    P4 processor
    2 gigs of RAM
    PRE7 installed on C drive with 65 gigs free space
    2 TBs storage space
    NVIDIA GEFORCE 5200

    Sam,
    When something works one day, but not the next, I look for what has changed. More often, than not, it's some program updating. Windows is famous for this, but then you can't update Windows, so that might rule it out.
    First thing I'd look into would be Restore Points. I always run a Restore in Safe Mode, and when there is a problem, will go quite a ways back, then work up to the present.
    If none of this works, then the virus/Trojan problem might loom more likely. Many of these can reside in Restore Points. When removing one, turning the auto Restore function OFF is usually advised. If you can locate such a nasty, then Google it. Chances are good that Norton, or others, will have a step-by-step way to remove it. It also seems that about 60% of all sites try to upload something nowadays, and much of it is not good. If you suspect any sort of infection, run your virus/Trojan sweeps from Safe Mode too. It will be slower, but more likely to uncover some problem. AdAware Search & Destroy offers a free version, and I usually keep it around, though I have many others. It seems to discovery things, that most other programs miss, with few false-positives. Even though I keep Norton, SpySweeper and StopZilla up, except when I am actually editing, and there is no Internet interaction, I'll do a Norton sweep in Safe Mode about once a week, just to be sure. Unfortunately, evil lurks right outside our door and some of it is tough to stop, find and disarm. The most benign sites often have little payloads, that can cause problems, if left "untreated."
    Good luck,
    Hunt

  • InDesign CS5 crashes when clicking on Edit menu or context menu

    I had this infuriating problem with InDesign CS4, found a few references to others having the same issue, but never any real solutions.  This problem seems to in InDesign CS5 as well.
    With a document open, if I click the Edit menu or right-click anywhere in the document window (including in the pasteboard area... it does not have to be on an object), ID immediately freezes and I get the Windows 7 "Adobe InDesign CS5 has stopped working" dialog.
    I've deleted the preferences, created a brand new one-page document, and the problem persists.  If no document is open, I can pull down the Edit menu just fine.  With a document open, ID crashes before it even draws the menu.  It does not matter whether I use the mouse or the keyboard to get to the Edit menu.  I can also right-click on things like palette tabs to bring up the context menu.  But I cannot right-click anywhere on the document itself without ID crashing.
    The maddening thing is that the problem did not show up until some time today.  I've brought up an object's Effects window via right-click plenty of times, as well as used the Fitting context menu.  It was working fine last night and earlier this morning.  Then suddenly for no discernible reason, the crashes started happening.  I am not aware of any changes to my system that might reasonably cause this.  No new fonts, no Windows updates, no Adobe updates.
    Any suggestions on how else I can troubleshoot this?

    Peter,
    Yes, I can bring up the Paragraph Styles and the Character palettes with no document open, edit the [Basic Paragraph] style to change the font family, then open a blank document, and new text boxes will use that font.
    I'm on a bit of a deadline right now, so I ended up uninstalling ID CS5 and reinstalling it.  I can now successfully bring up the Edit menu and the right-click context menu both in a blank document and in the document I was working on before.  I'm sure the problem will reappear again at some random point in the future, so I am still looking for fixes that don't involve reinstalling the app.
    BTW, I have tried exporting my work document to IDML and re-importing it, but to no avail.  I've also tried toggling Dynamic Spelling (past threads have suggested this as a possible fix), but also to no avail.
    It would be really nice if Adobe products produced some sort of crash dump or bug report when this sort of thing happens...

  • Siebel Web Client  crashes when clicking a certain view (Income).

    We are using Siebel Public Sector and I am encountering a recurring issue with our Siebel Web Client. For most part it works but something strange occurs when I execute a series of steps. Whenever I go to the Contacts Screen > Income View then click on another screen tab (i.e. Contacts, Cases, Calendar, Home, Households, etc.) the web client stops responding and throws out an error saying: Session Warning: The server you are trying to access is either busy or experiencing difficulties. Please close the Web browser, open a new browser window, and try logging in again.
    I'm not really sure what is going on so I checked the logs. I'm not really sure what is going on. If someone could enlighten me on what this issue could be that would be awesome!
    ----------- Log FILES -----------
    The sweapp logs got updated with these messages.
    SisnapiLayerLog     Error     1     000000814c570f29:0     2010-08-03 09:54:43     1440934800: [SISNAPI] Async Thread: connection (0xb919828), error (1180682) while reading message
    GenericLog     GenericError     1     000000814c570f29:0     2010-08-03 09:54:43     (ssmsismgr.cpp (837) err=1180682 sys=0) SBL-NET-01034: The SISNAPI connection was closed by the peer.
    GenericLog     GenericError     1     000000024c570e66:0     2010-08-03 09:54:43     ( (0) err=4653067 sys=0) SBL-SCB-00011: Failed to connect to pipe ((null)) on process (null).
    GenericLog     GenericError     1     000000024c570e66:0     2010-08-03 09:54:43     (ssmsismgr.cpp (773) err=3670020 sys=0) SBL-SSM-00004: SISNAPI Hello failed. The server component could be down.
    GenericLog     GenericError     1     000000024c570e66:0     2010-08-03 09:54:43     (ssmsismgr.cpp (1761) err=3670022 sys=0) SBL-SSM-00006: Error while sending message to server.
    ObjMgrSessionLog     Error     1     000000024c570e66:0     2010-08-03 09:54:43     CSSUModel::InvokeSrvcMethod - Failed with Error=10879179 for service=Web Engine Interface, method=Request
    ProcessPluginRequest     ProcessPluginRequestError     1     000000024c570e66:0     2010-08-03 09:54:43     -1742095472: [SWSE] Error invoking service method 10879179
    ProcessPluginRequest     ProcessPluginRequestError     1     000000024c570e66:0     2010-08-03 09:54:43     -1742095472: [SWSE] Error Message 0 : error 10879179 : Not connected to the server.
    SBL-SSM-00006: Error while sending message to server.
    ProcessPluginState     ProcessPluginStateError     1     000000024c570e66:0     2010-08-03 09:54:43     -1742095472: [SWSE] Invoke service method failed.
    GenericLog     GenericError     1     000000024c570e66:0     2010-08-03 09:54:43     ( (0) err=4653067 sys=0) SBL-SCB-00011: Failed to connect to pipe ((null)) on process (null).
    GenericLog     GenericError     1     000000024c570e66:0     2010-08-03 09:54:43     (ssmsismgr.cpp (773) err=3670020 sys=0) SBL-SSM-00004: SISNAPI Hello failed. The server component could be down.
    GenericLog     GenericError     1     000000024c570e66:0     2010-08-03 09:54:43     (ssmsismgr.cpp (1761) err=3670022 sys=0) SBL-SSM-00006: Error while sending message to server.
    GenericLog     GenericError     1     000000024c570e66:0     2010-08-03 09:54:43     ( (0) err=4653067 sys=0) SBL-SCB-00011: Failed to connect to pipe ((null)) on process (null).
    GenericLog     GenericError     1     000000024c570e66:0     2010-08-03 09:54:43     (ssmsismgr.cpp (773) err=3670020 sys=0) SBL-SSM-00004: SISNAPI Hello failed. The server component could be down.
    ProcessPluginRequest     ProcessPluginRequestError     1     000000024c570e66:0     2010-08-03 09:54:43     -1742095472: [SWSE] Set Error Response (Session: Error: 10879179 Message: Not connected to the server.
    SBL-SSM-00006: Error while sending message to server.)
    The PSCcObjMgr_enu log file got these errors:
    ObjMgrLog     Error     1     000000a44c570f29:0     2010-08-03 09:55:00     (cscfg.cpp (165)) SBL-CSR-00418: Communication: User is not associated with any communication configuration in the database.
    The SCBroker log file got these errors:
    GenericLog     GenericError     1     000000024c570e66:0     2010-08-03 09:51:01     (scbcomp.cpp (264) err=4653067 sys=0) SBL-SCB-00011: Failed to connect to pipe (SEBL_25_4565) on process 4565.
    GenericLog     GenericError     1     000000024c570e66:0     2010-08-03 09:54:43     (scbcomp.cpp (851) err=4653067 sys=0) SBL-SCB-00011: Failed to connect to pipe (SEBL_25_10776) on process 10776.
    GenericLog     GenericError     1     000000024c570e66:0     2010-08-03 09:54:43     (scbcomp.cpp (462) err=4653067 sys=0) SBL-SCB-00011: Failed to connect to pipe (SEBL_25_10776) on process 10776.
    GenericLog     GenericError     1     000000024c570e66:0     2010-08-03 09:54:43     (scbcomp.cpp (264) err=4653067 sys=0) SBL-SCB-00011: Failed to connect to pipe (SEBL_25_10776) on process 10776.
    GenericLog     GenericError     1     000000024c570e66:0     2010-08-03 09:54:43     (scbcomp.cpp (851) err=4653067 sys=0) SBL-SCB-00011: Failed to connect to pipe (SEBL_25_10776) on process 10776.
    GenericLog     GenericError     1     000000024c570e66:0     2010-08-03 09:54:43     (scbcomp.cpp (462) err=4653067 sys=0) SBL-SCB-00011: Failed to connect to pipe (SEBL_25_10776) on process 10776.
    GenericLog     GenericError     1     000000024c570e66:0     2010-08-03 09:54:43     (scbcomp.cpp (264) err=4653067 sys=0) SBL-SCB-00011: Failed to connect to pipe (SEBL_25_10776) on process 10776.
    GenericLog     GenericError     1     000000024c570e66:0     2010-08-03 09:54:43     (scbcomp.cpp (851) err=4653067 sys=0) SBL-SCB-00011: Failed to connect to pipe (SEBL_25_10776) on process 10776.
    GenericLog     GenericError     1     000000024c570e66:0     2010-08-03 09:54:43     (scbcomp.cpp (462) err=4653067 sys=0) SBL-SCB-00011: Failed to connect to pipe (SEBL_25_10776) on process 10776.
    GenericLog     GenericError     1     000000024c570e66:0     2010-08-03 09:54:43     (scbcomp.cpp (264) err=4653067 sys=0) SBL-SCB-00011: Failed to connect to pipe (SEBL_25_10776) on process 10776.
    The SRBroker log file got these errors:
    GenericLog     GenericError     1     000000814c570f29:0     2010-08-03 09:54:43     (srbroute.cpp (3089) err=3735554 sys=0) SBL-SRB-00002: Invalid argument provided.
    The <enterprise name>.<siebel server name> log got these errors:
    ServerLog     ProcessExit     1     000014a44c570e53:0     2010-08-03 09:54:43     PSCcObjMgr_enu      10776     SBL-OSD-02006 Process 10776 exited with error - Process exited because it received signal SIGABRT.
    ServerLog     ProcessCreate     1     000014a34c570e53:0     2010-08-03 09:54:43     Created server process (OS pid =      10838     ) for PSCcObjMgr_enu

    Dude - you definitely don't need any 3rd party software to figure this out. A bit of patience and research will help you solve it AND help you gain a better understanding of how Siebel works and how to debug problems such as this in the future.
    Setting the Log Level to 5 for all events in the Public Sector Object Manager is your first step. Log out then log back in and replicate the problem.
    Locate your log file and have a look at what's going on - chances are you'll see something in there that will immediately reveal the source of the problem.
    If there's a proper 'crash' involved, Siebel will generate a Flight Data Recorder (FDR) file - there are instructions on My Oracle Support on how to decode these. Really useful and very interesting to see how Siebel works at a low level.
    Debugging and fixing can definitely be arduous in Siebel - no two ways about it. However, researching, analysing and fixing issues yourself will prove both rewarding and educational! :)

  • Indesign CS5 Crashes When Exporting Layer to Incopy

    I had a designer who emailed me last week stating she was having problems with Indesign CS5 crashing when she exported her text layer to Incopy. I thought it might just be her machine; however, I've experienced the same problem today five times. Is this a known issue? Has anyone else experienced this? I'm in Indesign CS5 (7.0.3).

    Corrupt font perhaps?
    Bob

  • Photoshop CS5 crashes when I click "Print". I have a Mac with Yosemite OS, Epson workforce 40 printer, latest driver. I have reset Photoshop's preferences.

    Photoshop CS5 crashes when I click "Print". I have a Mac with Yosemite OS, an Epson Workforce 40, latest driver, and have reset Photoshop preferences.
    Thank you for any suggestions!

    Thanks again for your suggestion about Photoshop crashing since
    trying to print with Yosemite. I did go to the Adobe site, then the Apple Apps,
    and downloaded the new driver for the Epson Workforce 40 printer. Computer
    restarted. Unfortunately, Photoshop still crashes. But I appreciate your idea, and
    seems it should have worked. Happy Holidays!

  • CS5 crashing when exporting to InCopy

    ID CS5 crashes when we export to InCopy (CS5). We've tried many work arounds - move folder from server to desktop, turned off ID and PS pluggins in suitcase, restarted, saved IC by adding all stories to assignments, etc.
    Has anyone encountered anything like this? What helped you?

    Based on this description, it sounds like a placed graphic is causing the problem. Try item #3 underTroubleshoot print/export problems at the document level in this document:
    http://kb2.adobe.com/cps/499/cpsid_49998.html#main_DocumentLevel
    Matthew

  • Indesign crashes when clicking on print options

    indesign cs6 crashes when clicking on printer or page setup within the print options. OS 10.7.4

    Peter,
    Yes, I can bring up the Paragraph Styles and the Character palettes with no document open, edit the [Basic Paragraph] style to change the font family, then open a blank document, and new text boxes will use that font.
    I'm on a bit of a deadline right now, so I ended up uninstalling ID CS5 and reinstalling it.  I can now successfully bring up the Edit menu and the right-click context menu both in a blank document and in the document I was working on before.  I'm sure the problem will reappear again at some random point in the future, so I am still looking for fixes that don't involve reinstalling the app.
    BTW, I have tried exporting my work document to IDML and re-importing it, but to no avail.  I've also tried toggling Dynamic Spelling (past threads have suggested this as a possible fix), but also to no avail.
    It would be really nice if Adobe products produced some sort of crash dump or bug report when this sort of thing happens...

  • Crash when clicking on edit menu

    Hi,
    on a customers computer, adobe reader crashes when clicking on the edit menu (german menu "Bearbeiten").
    It doesn't matter if a pdf is open or not.
    Uninstalling and reinstalling did not help.
    What can I do?
    Thanks alot,
    Fabian

    Peter,
    Yes, I can bring up the Paragraph Styles and the Character palettes with no document open, edit the [Basic Paragraph] style to change the font family, then open a blank document, and new text boxes will use that font.
    I'm on a bit of a deadline right now, so I ended up uninstalling ID CS5 and reinstalling it.  I can now successfully bring up the Edit menu and the right-click context menu both in a blank document and in the document I was working on before.  I'm sure the problem will reappear again at some random point in the future, so I am still looking for fixes that don't involve reinstalling the app.
    BTW, I have tried exporting my work document to IDML and re-importing it, but to no avail.  I've also tried toggling Dynamic Spelling (past threads have suggested this as a possible fix), but also to no avail.
    It would be really nice if Adobe products produced some sort of crash dump or bug report when this sort of thing happens...

  • Photoshop CS5 crashes when trying to print. I recently updated to Mac OSX Mavericks. Help?

    Photoshop CS5 crashes when trying to print. I recently updated to Mac OSX Mavericks. Help?

    Hi, Chris. Thanks for giving this query a look. I have the same problem. All documents print on my HP Deskjet 932C except Photoshop files since I updated to Mavericks.
    My CS5 version is 9.0 x64. Mavericks is 10.9.4.
    I checked the HP drivers and HP doesn't have one for OS X newer than 10.4.
    I tried printing out the detailed report (very long!) and this page rejected the reply as spam. Can we provide the text as an attachment?

  • Premiere Pro CS5 crash when adjusting audio gain

    Premiere Pro CS5 crash when adjusting audio gain
    The same on another workstations.
    Have any idea?

    Hi Dennis,
    I just had a go and can reproduce the problem straight away too.
    Created a new project then a new XDCAM EX 1080p25 sequence. Imported a short Sony PMW-350 clip. Dragging it straight to the timeline and then setting audio gain is OK (Source channel mapping preferences set to mono).
    However, if I Modify - Audio Channels and then set track format as stereo or mono as stereo and then drag the clip to the timeline and right click - gain, Premiere crashes about 1/2 to 1 second after the audio gain dialogue box appears. Error log below if it's useful.
    Asus Rampage III extreme
    Intel i7 980x @ 3.33GHz
    24Gb ram
    Windows 7 64 bit
    Using onboard sound - Realtek HD 6.0.1.6037
    Incidentally, I tried with both the default Windows 7 audio drivers and then the Realtek HD drivers installed (I'd previously forgotten to install the Realtek driver when I built the PC)
    Log Name:      Application
    Source:        Application Error
    Date:          12/08/2010 14:28:51
    Event ID:      1000
    Task Category: (100)
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:     
    Description:
    Faulting application name: Adobe Premiere Pro.exe, version: 5.0.1.0, time stamp: 0x4bf119d2
    Faulting module name: MSVCR90.dll, version: 9.0.30729.4926, time stamp: 0x4a1750b0
    Exception code: 0xc0000005
    Fault offset: 0x000000000001dfcd
    Faulting process id: 0x16ec
    Faulting application start time: 0x01cb3a21ad8357e4
    Faulting application path: C:\Program Files\Adobe\Adobe Premiere Pro CS5\Adobe Premiere Pro.exe
    Faulting module path: C:\Windows\WinSxS\amd64_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.4926_none_08e1a05ba 83fe554\MSVCR90.dll
    Report Id: 8b5dda37-a615-11df-8de4-20cf3011131b
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Application Error" />
        <EventID Qualifiers="0">1000</EventID>
        <Level>2</Level>
        <Task>100</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2010-08-12T13:28:51.000000000Z" />
        <EventRecordID>2401</EventRecordID>
        <Channel>Application</Channel>
        <Computer></Computer>
        <Security />
      </System>
      <EventData>
        <Data>Adobe Premiere Pro.exe</Data>
        <Data>5.0.1.0</Data>
        <Data>4bf119d2</Data>
        <Data>MSVCR90.dll</Data>
        <Data>9.0.30729.4926</Data>
        <Data>4a1750b0</Data>
        <Data>c0000005</Data>
        <Data>000000000001dfcd</Data>
        <Data>16ec</Data>
        <Data>01cb3a21ad8357e4</Data>
        <Data>C:\Program Files\Adobe\Adobe Premiere Pro CS5\Adobe Premiere Pro.exe</Data>
        <Data>C:\Windows\WinSxS\amd64_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.4926_none_08e 1a05ba83fe554\MSVCR90.dll</Data>
        <Data>8b5dda37-a615-11df-8de4-20cf3011131b</Data>
      </EventData>
    </Event>

  • Finder crashes when clicking on Applications folder

    VERY weird. Beginning a few days ago the finder on my Mac Pro crashes whenever I clicked on the Applications folder. It makes no difference what finder view I am using (icons, columns, etc.). Even if I click on the alias to the Applications folder in the sidebar, the finder crashes. I cannot view the contents of that folder by any method. The only way I can get to an item contained therein is to search for it using Spotlight.
    Thinking that maybe my startup disk was hosed somehow, I ran Disk Utility (repaired permissions and verified the disk) and ran all tests within TechTool Deluxe. Both said the disk and filesystem were fine.
    I tried copying the entire folder to another disk, but the copy aborts after the first few items (stops with Adobe Photoshop; the next item alphabetically is Aperture). In case Aperture was somehow a problem, I removed it (searched using Spotlight and then dragged it to the trash). No change in behavior.
    I used Carbon Copy Cloner to replicate the entire drive to another, newly reformatted drive and made that drive the startup disk. No change in behavior.
    It sure seems that the issue has to do with some kind of file corruption (that CCC dutifully replicated) rather than a faulty drive, but I have no idea where to look next for a solution (other than reformatting and reinstalling over 100 applications from scratch; ugh).
    Does anyone have any idea what may be going on here? Until I can fix this, the Mac Pro is pretty much useless (luckily, I also have a MacBook Pro).

    Hi - I too am having this issue. 
    When I click on any of the items in my sidebar (i.e. -desktop, documents, applications, etc...) this causes the finder to crash and restart. 
    I have tried trashing the com.apple.finder.plist and running disk utility but to no avail.  I also found this other forum discussion (https://discussions.apple.com/thread/1336291?start=0&tstart=0) Where this was part of the post
      petrock
    Re: finder crashes when clicking desktop icon in sidebar - any help? 
    Feb 2, 2008 3:43 PM (in response to choegl)
    choegl, that crash is the same place as andreas's but it got there in a different manor. In the manor I would expect it to. It is trying to retarget the window to your selection in the sidebar and setup List View according to the view options for that folder from that folder's .DS_Store. Its specifically trying to get the label for one of the columns in List View (i.e. Size or Name or Date Modified) but the value it gets from the .DS_Store is corrupt/bogus and causes the Finder to crash (specifically a component underneath the Finder call CoreFoundation via a call to CFStringGetLength). Here's how you solve your problem. In /Applications/Utilities/Terminal.app type: +cd <path to problem folder>+
    +rm .DS_Store+
    +killall Finder+ Pressing return after each line. You can get the path to the problem folder by drag/dropping the folder into the Terminal window. When the Finder comes back up, see if it still crashes when you click on that problem folder (i.e. your Desktop) in the sidebar. Repeat the steps above for any other folders that behave this way when you click on them in the sidebar. Hope that helps everyone... 
    btw, I wrote up a bug report on your behalf about this issue and sent it off to Apple (# 5721669)."
    I tried this as well and nothing! 
    Anyone have any suggestions?  I'm at a loss and am hating this issue!  BTW, if I right click on any of the items in the sidebar, I can then click on open to get the folder to open.  HASSLE!  and if I forget (which is likely since I move too fast for my own good) then I crash the finder.  Also, this happens on all the users on my mac. 
    Thanks!!!!
    Matthew
    MacBookPro 2,2 - OS X 10.6.8 - 2.16 GHz - 3 GB mem -

  • Why is my keynote crashing when i try to view in the light table?

    My Keynote presentation crashes when I try to view it in the light table view, and the whole system has to be restarted. The file is not huge, only 54 slides, mostly graphics and video plus a little bit of text. It is under 1GB in size, which I can usually manage without issue. Has anyone else encountered this problem? Does anyone know of a solution or a workaround? I'd be so grateful for any help. Thanks!

    Try this maintenance routine which has solved quite a few issues:
    1
    Close all applications
    2
    Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
    3
    empty the trash
    4
    shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
    let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
    5
    go to;   Applications > Utilities > Disc Utility > First Aid > Repair Disc Permissions
    when this is completed restart the Mac normally
    6
    Reinstall Keynote using the original discs or logging into the Mac App Store and installing from there.
    Post back to let others know if this helped

  • Indesign CS5 crashes when deleting an index

    Hi,
    Indesign CS5 crashes when deleting an index.
    Thanks for your help.

    allesistständigimwandel wrote:
    the only successful importing the idml-file was in cs4, but there was the problem with the change of layout.
    Sounds like the .idml was created in CS5 an opened in CS4. Is that correct? You'd lose unsupported CS5 features and that might result in some layout changes, but I wouldn't expect formatting changes, which you implied originally.
    There are quite a few reports now of problems converting legacy files to CS5. I've not had any in my own work, but I haven't tried to update a lot of stuff. I wouldn't for example, switch versions near the end of a project, but would finish up in the original version to avoid any potential issues. Exporting from CS4 to either.inx or .idml and opening that in CS5 may give better results than opeing the CS4 .indd directly.
    Since you've already done the conversion, and considerable editing, I'm not sure what to tell you. You could try exporting the text to InDesign Tagged Text, then place that into a new file. Copy/Paste in Place any graphic content.

Maybe you are looking for