Incopy fails to lock assignments while editing

Workflow:
Incopy server using version 7.04
I am using InDesign CS5
Customer is using InCopy CS5
We have expirienced several times now that customer checks out an assignment and edits …
However I cannot see the frame is locked, I am able to check it out simultainiously, edit and check in again and the customers edits are lost.
This shouldn’t be possible, do you know an explanation.
BR
Nina Storm

Yes Bob - both InCopy and InDesign are fully patched to 7.04.
and - persons in working on the InCopy side are able to see who is editing in which frames.
It is only I on the InDesign end who cannot see which frames are checked out on the InCopy side, until they are checked in again.

Similar Messages

  • Locking up while editing

    Elements 11 randomly locks up my computer and I have to reboot in order to clear it. Only happens while editing a photo. I loose all my edits when this happens and I have to start over. Choice words are spoken when this happens. I did not have these problems with an earlier version of Elements, but I had to get 11 in order to get the raw files for my camera.

    Please see- https://blogs.adobe.com/pselements/tag/11/
    Thanks
    Andaleeb

  • Computer locks up while running safari

    I have an MAC running 10.9.2 mid 2010 - computer locks up while running safari - I have reset safari - not sure what else I could do to fix the problem - at least once a day I have to restart my mac

    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was started. Now clear the search box and scroll back in the log to the last boot time after  you had the problem. Select the messages logged before the boot, while the system was unresponsive or was failing to shut down. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V. Please include the BOOT_TIME message at the end of the log extract.
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post any other kind of report—it will be very long and not helpful.

  • Users locked out of editing Expense Reports

    Hi There,
    Users of the system are reporting that they are frequently unable to edit their expense reports, as the system incorrectly believes that they are attempting to edit reports in multiple sessions.
    A general error is occurring in which the user will be editing an expense report and will perform an action such as closing the browser, closing a browser window/tab or even simply exiting an expense report while using the application.
    After returning to the report, an error message appears saying that they are editing the expense report even though they only have one session open.
    This would suggest that upon performing such an action, the original session becomes stuck while editing the report, resulting in users having to wait long periods of time before this stuck session is automatically closed.
    Is this a commonly known problem, and is there any way that this can be fixed?
    Thanks,
    Tom Wright

    Tom,
    It's one of the biggest pains of the system! Requests have been submitted to SAP numerous times to stop locking people out of editing their reports for silly reasons that you mention. I am not sure if they have any intention of improving it.
    There is a trick to unlocking the report for editing though.
    - log off the system
    - attempt to log back on with the wrong password
    - then log back on with the correct one
    This action has worked 100% of the time in unlocking a report for edit.
    Best of luck,  Britt

  • Error while Editing Item - After importing pagegroup

    Hi All,
    We have Oracle Application server 10g (10.1.2) with Oracle Portal 10.1.2.0.0. as a test environment in win 2000 server.
    We installed a new Oracle Application server 10g (10.1.2) (production) with 10.1.2.0.2 in Suse Linux Enterprise server 9. every thing was fine.
    We have migrated one simple page group from source(win) to a new Portal in Linux ( by following the steps of Portal export / import Doc.). This is by exporting transport set, dmp file in source side and importing dmp file and transport set on the target. The import was successful. I checked the Navigator and found the imported page Group. Also all the sub pages and items have been found with proper regions.
    But when i'm trying to edit any item,region or adding region,item, it shows the following error. -----------------------
    ERROR :General invalidation message processing exception: User-Defined Exception (WWC-40018)
    General invalidation message processing exception: Error invalidating content, Non-200 status code returned by Web Cache. Status: 407 Proxy Authentication Required ( The ISA Server requires authorization to fulfill the request. Access to the Web Proxy service is denied. ) (WWC-40018)
    Note:Please kindly note that our repository and portal midtier on same machine. So there is no firewall between portal and repository. Also there is no proxy settings given in Portal. Moreover, I reinitialized the webcache invalidator password in both web cache admin and Portal. Nothing is working.
    Please kindly help me in this regard urgently. and provide me the solution along with the navigation details.
    Thanks in Advance,
    Abdullah Shafi

    HI,
    Pls reply me.did your issue resolved regarding webcache wwc-400018 ,same is the problem for me,webachacheadmin and invalidator pages are not working and while editing items in portal does reflect instaed it gives the error
    Error
    General invalidation message processing exception: An error occurred while closing the HTTP connection after receiving an error while getting the invalidation response from Web Cache: ORA-29273: HTTP request failed
    ORA-06512: at "SYS.UTL_HTTP", line 1389
    ORA-29261: bad argument
    ORA-29273: HTTP request failed
    ORA-06512: at "SYS.UTL_HTTP", line 1231
    ORA-29259: end-of-input reached (WWC-40018)
    General invalidation message processing exception: An error occurred while getting the invalidation response from Web Cache: ORA-29273: HTTP request failed
    ORA-06512: at "SYS.UTL_HTTP", line 1231
    ORA-29259: end-of-input reached (WWC-40018)
    Thanks and Regards,
    Azeem.

  • ORA-29861 Error while editing or adding search keywords in a File Item

    Hi,
    We are getting the following error while editing or adding search keywords to a file item:
    ORA-29861: domain index is marked LOADING/FAILED/UNUSABLE
    DAD name: portal30 PROCEDURE : PORTAL30.wwv_edit_tab.edititem
    Can you please tell us what went wrong.
    Thanks

    Vikas,
    From the server error messages reference:
    Cause: An attempt has been made to access a domain index that is being built or is marked failed by an unsuccessful ODCIIndexCreate or is marked unusable by a DDL operation.
    Action: Wait if the specified index is marked LOADING Drop the specified index if it is marked FAILED Drop or rebuild the specified index if it is marked UNUSABLE.
    It's possible you were loading the document while the index was being rebuilt. Search all_indexes where DOMIDX_STATUS <> 'VALID' OR DOMIDX_OPSTATUS <> 'VALID' to find the offending index and rebuild it.
    Regards,
    Jerry
    null

  • Root.sh failed on second node while installing CRS 10g on centos 5.5

    root.sh failed on second node while installing CRS 10g
    Hi all,
    I am able to install Oracle 10g RAC clusterware on first node of the cluster. However, when I run the root.sh script as root
    user on second node of the cluster, it fails with following error message:
    NO KEYS WERE WRITTEN. Supply -force parameter to override.
    -force is destructive and will destroy any previous cluster
    configuration.
    Oracle Cluster Registry for cluster has already been initialized
    Startup will be queued to init within 90 seconds.
    Adding daemons to inittab
    Expecting the CRS daemons to be up within 600 seconds.
    Failure at final check of Oracle CRS stack.
    10
    and run cluvfy stage -post hwos -n all -verbose,it show message:
    ERROR:
    Could not find a suitable set of interfaces for VIPs.
    Result: Node connectivity check failed.
    Checking shared storage accessibility...
    Disk Sharing Nodes (2 in count)
    /dev/sda db2 db1
    and run cluvfy stage -pre crsinst -n all -verbose,it show message:
    ERROR:
    Could not find a suitable set of interfaces for VIPs.
    Result: Node connectivity check failed.
    Checking system requirements for 'crs'...
    No checks registered for this product.
    and run cluvfy stage -post crsinst -n all -verbose,it show message:
    Result: Node reachability check passed from node "DB2".
    Result: User equivalence check passed for user "oracle".
    Node Name CRS daemon CSS daemon EVM daemon
    db2 no no no
    db1 yes yes yes
    Check: Health of CRS
    Node Name CRS OK?
    db1 unknown
    Result: CRS health check failed.
    check crsd.log and show message:
    clsc_connect: (0x143ca610) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_db2_crs))
    clsssInitNative: connect failed, rc 9
    Any help would be greatly appreciated.
    Edited by: 868121 on 2011-6-24 上午12:31

    Hello, it took a little searching, but I found this in a note in the GRID installation guide for Linux/UNIX:
    Public IP addresses and virtual IP addresses must be in the same subnet.
    In your case, you are using two different subnets for the VIPs.

  • Default behaviour of the Escape key while editing a cell in JTable??

    Hi all,
    i have a Jtable which get its data from an own model object which extends DefaultTableModel.
    If i overwrite the isCellEditable(row, col) method within the tablemodel object and set a specific column to editable, then i notice while editing a cell in that column that the default behaviour of the Escape key is that independet from what you have entered before in to the cell the editing stops and the cell gets the value it had before editing.
    This is the case for me even if i apply a custom editor to a column (one that extends DefaultCellEditor). It is just a JTextField that limits the number of digits a user can enter. Everything works fine. If the user edits the cell and presses ENTER or the "down arrow key" i can check what he has entered with the help of the getCellEditorValue() method. But if the user hits the ESC key after editing a cell this method is not invoked!!!
    My question is :
    is there any way to detect that the user cancels editing with the ESC-key.
    this is very important for me because if the user goes editing the cell i lock the related record in the database, if i cannot detect this it is locked till the application terminates.
    Thanks for any help in advance

    I try override the JTable editingCanceled() ==> does not work.
    I try the addCellEditorListener( CellEditorListener l ) ==> does not work.
    Finally, I try the addKeyListener ==> it works.
    Here is a quick demo. program:
    import javax.swing.*;
    import java.awt.*;
    import java.awt.event.*;
    import javax.swing.event.*;
    import javax.swing.table.*;
    public class Test {
    public static void main(String[] args){
    JFrame f = new JFrame();
    String[] colName = {"a", "b"};
    String[][] rowData = {{"1", "2"}, {"3", "4"}};
    JTable table = new JTable(rowData, colName);
    JTextField t = new JTextField(10);
    t.setBackground(Color.red);
    t.addKeyListener(new KeyAdapter() {
    public void keyPressed(KeyEvent e) {
    if (e.getKeyCode() == KeyEvent.VK_ESCAPE) {
    // do what ever you want ex. un-lock table
    System.out.println("ESCAPE");
    DefaultCellEditor editor = new DefaultCellEditor(t);
    TableColumnModel colModel = table.getColumnModel();
    for (int i = colModel.getColumnCount()-1; i >= 0; i--) {
    colModel.getColumn(i).setCellEditor(editor);
    f.setContentPane(new JScrollPane(table));
    f.pack();
    f.setVisible(true);

  • How to unlock the data from other user while editing

    Hi friends,
    I have created 4 maintenance views for a table. While editing data by using one view, I must be able to edit other data of the same table using other different view. But it is showing "The data is locked by user pagidala and can be displayed only. do u want to display locked data?". I must not get this error, it must permit me to edit the data. How it will be possible?
    Thanks,
    Ramesh.

    Hi,
    I think Its not possible because If there is such type of option there will not be data security.
    i.e. while your maintaing the data in table others can change it simultaneously and it can lead to errors
    If you wish Go to SM12 and remove the lock manually
    Regards
    Prasanth

  • Cant import iPhoto library. Locks up while "upgrading Library"

    I have a new macbook air running OS X Mavericks. I tried to just copy the iphoto library from old mac to the pics library of new mac. I photo locks up while "upgrading library"
    Tried to use migration assistant and it says I must first upgrade the OS of the old mac. My old mac cannot upgrade to mavericks, it is too old.
    Suggestions?

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • Aperture crashes while editing. Exception Type:  EXC_BAD_ACCESS (SIGSEGV)

    Hi! First, Aperture began to fail while editing, all the time. I repaired the library a lot of times, also repair permissions and move the library to a external HD for working with a new library. Nothing worked. I also did a test on my computer and the memory seems fine.
    I'm using Aperture 3.4.3 and I have a 13-inch, mid 2012 MacBook Pro Version 10.7.5, 2.5 Ghz Intel Core i5, 4 GB 1600 MHz DDR3.
    I copy the error message below, thanks!
    Process:         Aperture [558]
    Path:            /Applications/Aperture.app/Contents/MacOS/Aperture
    Identifier:      com.apple.Aperture
    Version:         3.4.3 (3.4.3)
    Build Info:      Aperture-310022000000000~1
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [129]
    Date/Time:       2013-03-04 23:13:04.401 +0100
    OS Version:      Mac OS X 10.7.5 (11G63)
    Report Version:  9
    Interval Since Last Report:          240513 sec
    Crashes Since Last Report:           25
    Per-App Interval Since Last Report:  80640 sec
    Per-App Crashes Since Last Report:   21
    Anonymous UUID:                      21FCBB11-229D-443A-9527-F6BFD46EE7D9
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x00000001303df200
    VM Regions Near 0x1303df200:
        MALLOC_LARGE           0000000130135000-00000001303df000 [ 2728K] rw-/rwx SM=PRV
    -->
        IOKit                  000000013046b000-0000000130470000 [   20K] rw-/rw- SM=ALI
    Application Specific Information:
    objc[558]: garbage collection is OFF
    Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
    0   com.apple.geode                    0x000000010b512041 -[DGGetPixelsProcessor processConstArea:bufferPtr:rowBytes:format:] + 1119
    1   com.apple.geode                    0x000000010b4c90a9 __52-[DGImageBuffer processConstPixelsInArea:processor:]_block_invoke_0 + 72
    2   com.apple.geode                    0x000000010b4c9592 -[DGImageBuffer forEachImmutableTileInROI:processor:] + 1183
    3   com.apple.geode                    0x000000010b4c905b -[DGImageBuffer processConstPixelsInArea:processor:] + 111
    4   com.apple.geode                    0x000000010b4fd755 DGGetPixelsForArea + 492
    5   com.apple.geode                    0x000000010b4c9635 -[DGImageBuffer getPixelsForArea:destPtr:destPtrRowBytes:] + 54
    6   com.apple.RedRock                  0x000000010a27ee34 -[LazyLabImage getPixelsForArea:destPtr:destPtrRowBytes:] + 2667
    7   com.apple.RedRock                  0x000000010a27d3c6 -[RKSelectiveMaskProcessor processStamp:radius:softness:brushBounds:brushPtr:brushPtrRowBytes:destData:des tDataRowBytes:] + 520
    8   com.apple.geode                    0x000000010b4f8611 -[DGBrushStroke rasterizeToMaskWithProcessor:scaledMaskBounds:maskPtr:maskPtrRowBytes:scale:clo se:startIndex:lastStampedIndex:] + 1403
    9   com.apple.Aperture                 0x00000001098eb5a7 0x109591000 + 3515815
    10  com.apple.geode                    0x000000010b4c9860 __54-[DGMutableImageBuffer processPixelsInArea:processor:]_block_invoke_0 + 72
    11  com.apple.geode                    0x000000010b4c9d1b -[DGMutableImageBuffer forEachMutableTileInROI:processor:] + 1144
    12  com.apple.geode                    0x000000010b4c980d -[DGMutableImageBuffer processPixelsInArea:processor:] + 139
    13  com.apple.Aperture                 0x00000001098eebe3 0x109591000 + 3529699
    14  com.apple.Aperture                 0x00000001098ef4ff 0x109591000 + 3532031
    15  com.apple.Aperture                 0x00000001098ed012 0x109591000 + 3522578
    16  com.apple.Aperture                 0x0000000109a062c7 0x109591000 + 4674247
    17  com.apple.Aperture                 0x0000000109a06e85 0x109591000 + 4677253
    18  com.apple.Aperture                 0x0000000109a07e83 0x109591000 + 4681347
    19  com.apple.AppKit                   0x00007fff96967a0e -[NSApplication run] + 555
    20  com.apple.prokit                   0x000000010aaa8be1 NSProApplicationMain + 387
    21  com.apple.Aperture                 0x00000001095a14a2 0x109591000 + 66722
    22  com.apple.Aperture                 0x00000001095a0df4 0x109591000 + 65012
    Thread 1:: Dispatch queue: com.apple.libdispatch-manager
    0   libsystem_kernel.dylib             0x00007fff964dd7e6 kevent + 10
    1   libdispatch.dylib                  0x00007fff92934786 _dispatch_mgr_invoke + 923
    2   libdispatch.dylib                  0x00007fff92933316 _dispatch_mgr_thread + 54
    Thread 2:
    0   libsystem_kernel.dylib             0x00007fff964dcbca __psynch_cvwait + 10
    1   libsystem_c.dylib                  0x00007fff952a72a6 _pthread_cond_wait + 890
    2   com.apple.Foundation               0x00007fff94fb3a5c -[NSCondition waitUntilDate:] + 371
    3   com.apple.Foundation               0x00007fff94f7d22e -[NSConditionLock lockWhenCondition:beforeDate:] + 251
    4   com.apple.proxtcore                0x000000010b77403a -[XTMsgQueue waitForMessage] + 47
    5   com.apple.proxtcore                0x000000010b773282 -[XTThread run:] + 329
    6   com.apple.Foundation               0x00007fff94f8472a -[NSThread main] + 68
    7   com.apple.Foundation               0x00007fff94f846a2 __NSThread__main__ + 1575
    8   libsystem_c.dylib                  0x00007fff952a38bf _pthread_start + 335
    9   libsystem_c.dylib                  0x00007fff952a6b75 thread_start + 13
    Thread 3:
    0   libsystem_kernel.dylib             0x00007fff964dcbca __psynch_cvwait + 10
    1   libsystem_c.dylib                  0x00007fff952a72a6 _pthread_cond_wait + 890
    2   com.apple.Foundation               0x00007fff94fb3a5c -[NSCondition waitUntilDate:] + 371
    3   com.apple.Foundation               0x00007fff94f7d22e -[NSConditionLock lockWhenCondition:beforeDate:] + 251
    4   com.apple.proxtcore                0x000000010b77403a -[XTMsgQueue waitForMessage] + 47
    5   com.apple.proxtcore                0x000000010b773282 -[XTThread run:] + 329
    6   com.apple.Foundation               0x00007fff94f8472a -[NSThread main] + 68
    7   com.apple.Foundation               0x00007fff94f846a2 __NSThread__main__ + 1575
    8   libsystem_c.dylib                  0x00007fff952a38bf _pthread_start + 335
    9   libsystem_c.dylib                  0x00007fff952a6b75 thread_start + 13
    Thread 4:
    0   libsystem_kernel.dylib             0x00007fff964dcbca __psynch_cvwait + 10
    1   libsystem_c.dylib                  0x00007fff952a72a6 _pthread_cond_wait + 890
    2   com.apple.Foundation               0x00007fff94fb3a5c -[NSCondition waitUntilDate:] + 371
    3   com.apple.Foundation               0x00007fff94f7d22e -[NSConditionLock lockWhenCondition:beforeDate:] + 251
    4   com.apple.proxtcore                0x000000010b77403a -[XTMsgQueue waitForMessage] + 47
    5   com.apple.proxtcore                0x000000010b773282 -[XTThread run:] + 329
    6   com.apple.Foundation               0x00007fff94f8472a -[NSThread main] + 68
    7   com.apple.Foundation               0x00007fff94f846a2 __NSThread__main__ + 1575
    8   libsystem_c.dylib                  0x00007fff952a38bf _pthread_start + 335
    9   libsystem_c.dylib                  0x00007fff952a6b75 thread_start + 13
    Thread 5:
    0   libsystem_kernel.dylib             0x00007fff964dcbca __psynch_cvwait + 10
    1   libsystem_c.dylib                  0x00007fff952a72a6 _pthread_cond_wait + 890
    2   com.apple.Foundation               0x00007fff94fb3a5c -[NSCondition waitUntilDate:] + 371
    3   com.apple.Foundation               0x00007fff94f7d22e -[NSConditionLock lockWhenCondition:beforeDate:] + 251
    4   com.apple.proxtcore                0x000000010b77403a -[XTMsgQueue waitForMessage] + 47
    5   com.apple.proxtcore                0x000000010b773282 -[XTThread run:] + 329
    6   com.apple.Foundation               0x00007fff94f8472a -[NSThread main] + 68
    7   com.apple.Foundation               0x00007fff94f846a2 __NSThread__main__ + 1575
    8   libsystem_c.dylib                  0x00007fff952a38bf _pthread_start + 335
    9   libsystem_c.dylib                  0x00007fff952a6b75 thread_start + 13
    Thread 6:
    0   libsystem_kernel.dylib             0x00007fff964dcbca __psynch_cvwait + 10
    1   libsystem_c.dylib                  0x00007fff952a72a6 _pthread_cond_wait + 890
    2   com.apple.Foundation               0x00007fff94fb3a5c -[NSCondition waitUntilDate:] + 371
    3   com.apple.Foundation               0x00007fff94f7d22e -[NSConditionLock lockWhenCondition:beforeDate:] + 251
    4   com.apple.proxtcore                0x000000010b77403a -[XTMsgQueue waitForMessage] + 47
    5   com.apple.proxtcore                0x000000010b773282 -[XTThread run:] + 329
    6   com.apple.Foundation               0x00007fff94f8472a -[NSThread main] + 68
    7   com.apple.Foundation               0x00007fff94f846a2 __NSThread__main__ + 1575
    8   libsystem_c.dylib                  0x00007fff952a38bf _pthread_start + 335
    9   libsystem_c.dylib                  0x00007fff952a6b75 thread_start + 13
    Thread 7:
    0   libsystem_kernel.dylib             0x00007fff964dcbca __psynch_cvwait + 10
    1   libsystem_c.dylib                  0x00007fff952a72a6 _pthread_cond_wait + 890
    2   com.apple.Foundation               0x00007fff94fb3a5c -[NSCondition waitUntilDate:] + 371
    3   com.apple.Foundation               0x00007fff94f7d22e -[NSConditionLock lockWhenCondition:beforeDate:] + 251
    4   com.apple.proxtcore                0x000000010b77403a -[XTMsgQueue waitForMessage] + 47
    5   com.apple.proxtcore                0x000000010b773282 -[XTThread run:] + 329
    6   com.apple.Foundation               0x00007fff94f8472a -[NSThread main] + 68
    7   com.apple.Foundation               0x00007fff94f846a2 __NSThread__main__ + 1575
    8   libsystem_c.dylib                  0x00007fff952a38bf _pthread_start + 335
    9   libsystem_c.dylib                  0x00007fff952a6b75 thread_start + 13

    Dear Léonie, I'm editing some pictures for work, so I tried them in my original library and then in another one, and It crashed anyway. So, I think that may be is a corrupt file issue in my work photos. Today I worked relatively well, with those photos in a new library, and only failed 3 times (before the faults were thousands!). Every time, before and now, It's crashes when I'm editing, mainly while using brushes. I work with RAW files, so they're very large images, and I have no plug-in installed.
    Dear Frank, as I said to Leonie, I imported my files back into a new library and keeps crashing. I'll try to create a new user and run Aperture. What is the use of that?
    Thank you both!
    PS: I think there might be a corrupt file, because one of the times it crashed the photo I was workig on appeared like this (attached here) when I restarted the program.

  • Error while editing a page in Oracle Composer

    While editing a page on the remote server using Oracle Composer I am getting the following error:
    Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.1.2.v20101206-r8635): org.eclipse.persistence.exceptions.ValidationException
    Exception Description: Cannot acquire data source [java:comp/env/jdbc/WebCenterDS].
    Internal Exception: javax.naming.LinkException: [Root exception is javax.naming.NameNotFoundException: While trying to lookup 'jdbc.webcenter.CustomPortalDS' didn't find subcontext 'webcenter'. Resolved 'jdbc'; remaining name 'webcenter/CustomPortalDS']; Link Remaining Name: 'jdbc/webcenter/CustomPortalDS'
    Exception Description: Cannot acquire data source [java:comp/env/jdbc/WebCenterDS].
    Internal Exception: javax.naming.LinkException: [Root exception is javax.naming.NameNotFoundException: While trying to lookup 'jdbc.webcenter.CustomPortalDS' didn't find subcontext 'webcenter'. Resolved 'jdbc'; remaining name 'webcenter/CustomPortalDS']; Link Remaining Name: 'jdbc/webcenter/CustomPortalDS'
    While trying to lookup 'jdbc.webcenter.CustomPortalDS' didn't find subcontext 'webcenter'. Resolved 'jdbc'
    Any pointers would be helpful

    Hi,
    I think, Package ZBI_NEW  is a custom development package: probably someone else already transported the application component hierarchy and assigned this package...try to change this. Chk with SE80 > package > ZBI_NEW,If it is not there,create it.
    But the normal practice is change/Edit DSO in DEV-->Quality , then transport to Production.(SE80
    In the drop down, look for Packages,below it type ZBI_* and hit Open.If you don't see ZBI_NEW, then ask BASIS to Create (DEV)and import that Package to QAS->Production)
    Regards
    CSM Reddy

  • VS2012 SSRS Project - Intellisense problem while editing dataset

    Environment: VS2012 with SSDT, Reporting Services project
    When editing the dataset query (which is T-SQL code) of any report and I try to type
    table.field, when I reach the period (.) character Intellisense pops up with Equals & ReferenceEquals, and interferes with completing the
    table.field statement.
    This is while editing in: Datasets>Mydataset>Dataset Properties>Query>Expression
    Its extremely annoying and unnecessary to have to correct the unhelpful and ignorant autocomplete of Intellisense.
    Turning off Intellisense in Tools>Options>Text Editor>SQL Server Tools>Intellisense has no effect.
    Is there a way to:
    1)  Inform Intellisense to NOT try to insert non-SQL code, or
    2) Turn off Intellisense in the Expression window?

    Hi TG99,
    In Reporting Services, when we type a dot behind alphabets or square brackets in Expression dialog box, it automatically pops up a list begin with “Equals”. This is by design.
    To work around this issue, we can directly write T-SQL query commands in Query pane or Query Designer pane of Dataset Properties dialog box. In this way, it wouldn’t pops up any character for auto IntelliSense.
    The following screenshots are for your references:
    If there are any other questions, please feel free to ask.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Help! While editing a photo in CS3 the program shut down and will not reopen my psd file.

    Help! While editing a photo in CS3 the program shut down and will not reopen my psd file. The error message reads "cannot complete your request because of a program error" -- it is a very large file (I have been saving it all along) and I had just "flattened layers" and went to open up a new, blank photo file when it shut down. Is there anyway to get this file to open? Any advice would be greatly appreciated! (p.s. after reading a couple of similar threads, I have a feeling it's hopeless. But I'd also like to know WHY this might have happened!) Thanks in advance!

    Thank you. I appreciate you taking the time to respond and for sharing the article--I did panic. Here are the details of my system:
    Model: HP p7-1247c
    Processor: AMD A8-3820 APU with Radeon HD Graphics
    Installed Memory: 8 GB (7.48 usable)
    System Type: 64-bit
    Windows 7 Home Premium
    I am using Photoshop CS3. It seems that I can work on photos and save them. But I am unable to open them back up. I have tried saving the files as psd and tiff with the same result. The error message is:  "cannot complete your request because of a program error"
    The interesting thing is that I can open up InDesign and "place" the psd file within InDesign (then export and save as a jpeg). So I don't think the files are necessarily corrupted. I uninstalled Photoshop and reinstalled it last night, but there's no change.
    If you have any ideas, I'd appreciate it. Or, should I repost my question with this more complete info? Thank you!

  • Error while editing PO - deleting service line item and creating material line item.

    In SAP SRM Extended classic scenario, PO is in 'ordered' status and contains a service line item. While editing this PO, I delete the service line item and create a new material line item. This gives me the following error.
    Back end error: Enter G/L account
    Back end error: LIne item still contains faulty items.
    This happens only with service- material comibination and no other combination(material-service, service-service, material-material).
    I need to know the reason for this issue and how it can be solved?

    PO Values (Inc Tax):
    Item 1: INR 228 L
    Item 2: INR 27.83 L   (Payment also done in 2008)
    GR for Item 1: INR 207.46 L
    Remaining Comm = INR 21.01 L
    Item 1 having 73 sub line items.... fo some of the sub-line items GR for some qty already done in last fiscals.
    User changing for remaining qty.
    Budget Report values:
    Previous Years:  Budget, Actual & Assigned = 304.85 L
                                Available = 0      (Carry Forward done for Budget & Commitments)
    2011:                   Budget = 75.15 L
                                Actual = 53.86 L
                                Comm = 21.01 L   (Same as Remaining Commitment)
                                Avai = 0.28 L
    Hope this will help.

Maybe you are looking for

  • Why are animated GIF's...

    ...Not working when I forward them using Mail? I've tried forwarding them to myself and when opened the GIF's are no longer animated and the size and format of things has changed. This also happens in redirect. Any Ideas?

  • Mandatory for Date field

    Hi All,      I want to display to Mandatory field if date field is blank or null... But this code only valiadate ,the Entered date correct or not... So how to display the Mandatory date field.. Please suggest me ...What is the error..      IWDMessage

  • Flashplayer fp_distribution

    why do you not update ....[ link removed]http://www.adobe.com/products/flashplayer/fp_distribution3.html to the new release? [Warning from forum host: The Flash Player distribution agreement  forbids you from publishing the direct-download URL]

  • I cannot open iTunes on my iphone help!!!!!

    Since updating my iphone to the ISO7 I cannot connect to iTunes please help!!!!!!

  • Was tun wenn der Softwareaktualisierungsbutton beim Iphone 4 fehlt ?

    How can i download the new Version without the Softwarebutton on my Iphone ?