InCopy Installation Issues 32-bit

I built a 32-bit and a 64-bit Version of InCopy CC with the Package Installer.
The 64-bit Version installs fine, but I'm having issues with the 32-bit installer package:
The installer starts and after a short time the progress bar just rolls back and nothing more happens.
The SW does not get installed.
I already built a new package, which shows exactly the same result.
Any help/ideas?
Thanks, L T J

These links may help
-Team Installer http://forums.adobe.com/thread/1363686?tstart=0
-http://helpx.adobe.com/creative-cloud/packager.html
http://forums.adobe.com/community/download_install_setup/creative_suite_enterprise_deploym ent

Similar Messages

Lightroom 4.2 Installation Issue

Leaving this around in case anyone else has the same problem -- Solution found -- Windows installer issues / registry issues -- used the Microsoft Fix it tool (http://support.microsoft.com/kb/2438651#reso3) to correct. 4.2 install ran fine.
I've read through the posts in the Lightroom forum regarding LR 4.2 install issues. I will list here the things I've done to try to get the install to work:
1) Downloaded the installation software twice.
2) Ran the setup program in admin user mode.
3) Ran the install in admin user mode.
4) Get the following error in a Windows Installer window:
The feature you are trying to use is on a network resource that is unavailable.
Click ok to try again, or enter an alternate path to a folder containing the installation package 'Adobe_Lightroom_x64.msi' in the box below.
Use source:
c:\Users\RMJF\AppData\Local\Temp\{...}
What I have found (after displaying hidden AppData folder):
The location where the .msi file resides is different from the one defaulting in the above window.
I select this alternate path, but still cannot complete the installation.
Furthermore, when I cancel the install, I get this error:
Adobe Photoshop Lightroom 4.2 64-bit Installer Info
Error 1714. The older version of Adobe Photoshop Lightoom 4.2 64-bit cannot be removed. Contact your technical support group
I have been running LR since the beginning of time and most recently LR 4.1, so there is no 4.2 installed.
Also, I tried to fix the install of 4.1 via the programs in Control Panel. I cannot repair it and get this error:
The installation source for this product is not available. Verify that the source exists and that you can access it.
All versions (except the 1.0 version) were downloaded and installed from the Adobe LR site.
So, looking for suggestions.
Seems like there are some missing files from the 4.1 version that are hindering the install of 4.2???
All quite frustrating. Hope you can get me to a speedy solution.
(System info: Windows Vista 64-bit Home, SP 2, 20 GB of disk space to spare! Also, I have set the install program to be allowed by the anti-virus program. I have run a registry clean-up, as well. No other apps are running during the install.)
Message was edited by: marzo19

untill now, 3 phones later, and mayby 10 attemps later to install it: notting. the errors that i am gething are the same as above, but nothing helps for me.
even the microsoft fixid diden't help.
So also desperate.

Installation issue on opensuse 11

Hey All, Im a Windows guy still struggling with Linux set-upsso take it easy on me! :) and Im having a hard time getting blaze installed and running. This is what Ive done so far. I've successfully set-up the latest copy of openSuse11 64 bit version with: Tomcat 6.0.16 (Tested and running) ANT 1.7 JAVA SDK & JDK 6 Junit (ant-junit, junit, junit-javadoc, junit-manual, libcppunit-1_12-0) Downloaded both blazeds.war and blazeds_src_3-0-0-544.zip From Tomcat Manager I uploaded the blazeds.war file successfully. I unzipped the zip file into root/blazeds and from a command prompt ran ant. These are the errors Im getting: * [taskdef] Could no load definitions from resource net/sf/antcontrib/antcontrib.properties. It could not be found. (Repeats about a dozen times) * BUILD FAILED * /root/blazeds/build.xml:445: The following error occurred while executing this line: * /root/blazeds/resources/fds-ajax-bridge/build.xml:52 Problem: failed to create task or type if Cause: The name is undefined. * Action: Check the spelling * Action: Check that any custom tasks/types have been declared * Action: Check that any <presetdef>/<mac rodef> declarations have taken place. Variables: env | grep _HOME ANT_HOME = /usr/share/ant JRE_HOME =/usr/lib64/jvm/java/jre JAVA_HOME =/usr/lib64/jvm/java/jre SDK_HOME =/usr/lib64/jvm/java/jre JDK_HOME =/usr/lib64/jvm/java/jre Any ideas? Brad

Hi Alex,
Sorry I've been away and just got back. Presently I'm working from jrun4 and would like to use blazeds instead. Once my projects get going I would need the ability to use my customers already made linux/tomcat boxes and just plug in blaze.
I look forward to your answer.
Brad
On Fri, Aug 1, 2008 at 12:57 PM, Alex Glosband
<
[email protected]> wrote:
A new message was posted by Alex Glosband in
Configuration and Getting Started Discussion --
Installation issue on opensuse 11
Are you just trying to install and run BlazeDS? Why do you need to build from source?
-Alex
View/reply at
Installation issue on opensuse 11
Replies by email are OK.
Use the
unsubscribe form to cancel your email subscription.

Forms 10g Installation issue on windows 7 Professional service pack 1

hi
I am trying to install oracle forms 10g 64 bit windows 7 Professional service pack 1 ..
Below are 2 files that i am using ..
ds_windows_x86_101202_disk1.zip (626,122,752 bytes)
ds_windows_x86_101202_disk2.zip (236,880,881 bytes)
But it failed but the error is ..
Checking operating system version: must be 4.0, 5.0, 5.1 or 5.2. Actual 6.1 Failed <<<<
just wondering if there are any workaround ..

Christian is right - Forms 10g R2 (version 10.1.2.0.2) is not certified for installation on Windows 7. You must apply a Forms 10g R2 patch to bring the version to 10.1.2.3.0 for it to be certified. You must have a My Oracle Support account to obtain the patch.
Now, to your question - is there a workaround; the answer is yes. There are known issues with this installer. I'll list them and their workaround.
1. The Oracle installer checks for a specific set of Windows versions rather than check for a minimum Windows version.
Workaround: Right-click the Installer and select Properties. Click the Compatibility tab and click the checkbox: Run this program in compatibility mode for: Windows XP SP3).
2. The Oracle Installer can't detect Windows Managed Virtual Memory (VM).
Workaround: You must temporarily change the Virtual Memory settings and specify specific Initial and Maximum sizes. See this Microsoft article for more information on changing VM settings. http://windows.microsoft.com/en-us/windows-vista/change-the-size-of-virtual-memory
This change will require you to restart your computer. After you have successfully installed Oracle Forms 10g, you can restore the original VM settings.
3. The Oracle installer MUST be installed as an "Administrator".
Workaround: Windows 7 uses "Least privileged user" so you must right-click the Installer and select the Compatibility tab. Click the "Run this program as an administrator" checkbox.
4. Not a Oracle installer issue, but you will have to install the 32-bit version of the Oracle Java Runtime Environment (JRE) (1.6.0 - not 1.7.0) because Oracle Forms is a 32-bit application so it will not be able to use the 64-bit JRE.
Run the Oracle installer and it should now install succesfully.
Craig...

Application Runtime Environment installation issue

Hi,
JDeveloper 11.1.1.3.0
OS: Solaris SPARC
I am trying to install the application runtime environment and I am getting the below error. Please advice me on how to resolve this issue.
JAVA Version in Solaris SPARC :
weblogic@comm1 ~/Installs $ java -version
java version "1.5.0_24"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_24-b02)
Java HotSpot(TM) Server VM (build 1.5.0_24-b02, mixed mode)
Error:
weblogic@comm1 ~/Installs $ cd Disk112/
weblogic@comm1 ~/Installs/Disk112 $ cd Disk1/
weblogic@comm1 ~/Installs/Disk112/Disk1 $ ./runInstaller
./runInstaller: /apps/wls/Installs/Disk112/Disk1/install/solaris/runInstaller: cannot execute
./runInstaller: syntax error at line 299: `count1=$' unexpected
Thanks,
Rajesh

Hi,
I have installed the jdk 64bit version and tried the application runtime environment installation but I am still getting the same old error. Here it is..
weblogic@dwlsalescomm1-c2 ~/Installs/Disk112/Disk1 $ ./runInstaller -jreLoc /apps/wls/WL10/jdk1.6.0_21/
./runInstaller: /apps/wls/Installs/Disk112/Disk1/install/solaris/runInstaller: cannot execute
./runInstaller: syntax error at line 299: `count1=$' unexpected
JDK Version:
WL10/jdk1.6.0_21/bin $ ./java -d64 -version
java version "1.6.0_21"
Java(TM) SE Runtime Environment (build 1.6.0_21-b06)
Java HotSpot(TM) 64-Bit Server VM (build 17.0-b16, mixed mode)
Please advice me on how to resolve this installation issue.
Thanks,
Rajesh
Edited by: Rajesh on Mar 15, 2011 8:28 AM

Acrobat Installation Issues due to Computer Switch

My surface bit the dust last week and I had to replace it. Downloaded acrobat successfully tot eh surface but then that apparently cut off access to the adobe pro on my home computer.
How do I get acrobat re-installed without the "you don't have a license" error message.
I am on a subscription plan
P

licensing issue-the system does not recognize that I have a license so I would love to eb able to speak with a real person so they coudl go and look at my purchase and fix the problem.
I'll be calling on Monday- right now I am using a trial version again but need to fix before the 39 days are up Peter Collopy, CSP, CIH, CHP
Damariscotta, ME518.859.1944 (cell)
From: RahulTyagi4you <[email protected]>
To: Peter Collopy <[email protected]>
Sent: Sunday, March 1, 2015 5:30 AM
Subject: Acrobat Installation Issues due to Computer Switch
Acrobat Installation Issues due to Computer Switch
created by RahulTyagi4you in Acrobat Installation & Update Issues - View the full discussionHi Peter Collopy, Is Acrobat properly installed on your system?Please confirm if you facing installation issues or licensing issues? Regards,Rahul Tyagi If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7240431#7240431 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7240431#7240431 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Acrobat Installation & Update Issues by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Where do I get the adobe presenter installer for 64 bit?

I bought presenter 8 today thinking that it would work in 64 bit office PowerPoint but I can't download or find the 8.01 version that has the 64 bit installer. Does it not exist after all?

try this http://blogs.adobe.com/captivate/2012/08/resolution-adobe-presenter-8-installer-issue.html

AnyConnect installation issues - Network Adapter is not created - cannot find any error?

I am a contractor with a Federal Agency that just swithed to using Cisco AnyConnect for VPN access. I am about the only person with this installation issue, that I know of. When installing the AnyConnect client on a Windows 7 machine running a 3.X msi install - the expected Cisco NewWork Adapter is not created in Network connections as I would expect. I have turned off Firewall services, I've turned off SQL services, Citrix, etc. But nothing I have tried allows this to install correctly.
When I attempt to use the AnyConnect VPN client and login the the remote service - I receive the
The VPN client driver has encountered an problem. Please restart your computer or device, then try again.
I have attempted the driver database fix suggested online - BUT it didn't correct the problem because I think my problem is in the initial setup, although I cannot find and error in the Windows/inf/setupapi.app.log and setupapi.dev.log that would suggest there is an driver problem.
The DART logs are a bit cryptic, but nothing stands out that would give me any idea as to what might be blocking the creating of the Network adapter the VPN Client would use to connect to the remote network.
Can anyone here point me in the right direction - I am not receiving help from configuration management - their solution is to format my entire computer and rebuild it which will cost me weeks of time and I have a deadline looming in Feburary.
Thank you!
Michael

Hi Jacob,
Let's try this & report the outcome...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
Is that Interface dragged to the top of Network>Show:>Network Port Configurations and checked ON?
The Interface that connects to the Internet, needs to be drug to the top of System Preferences>Network>Show:>Network Port Configurations and checked ON.
10.5.x/10.6.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
The interface that connects to the Internet should be dragged to the top of the list.
Then highlight the interface you connect with, click Advanced, is it set to Using DHCP, what IP does it Show & Router IP, then click on Proxies tab & make sure none are set, click on the DNS tab and enter these numbers...
208.67.222.222
208.67.220.220

AnyConnect installation issue - Network Adapter is not created - cannot find any error?

I am a contractor with a Federal Agency that just swithed to using Cisco AnyConnect for VPN access. I am about the only person with this installation issue, that I know of. When installing the AnyConnect client on a Windows 7 machine running a 3.X msi install - the expected Cisco NewWork Adapter is not created in Network connections as I would expect. I have turned off Firewall services, I've turned off SQL services, Citrix, etc. But nothing I have tried allows this to install correctly.
When I attempt to use the AnyConnect VPN client and login the the remote service - I receive the
The VPN client driver has encountered an problem. Please restart your computer or device, then try again.
I have attempted the driver database fix suggested online - BUT it didn't correct the problem because I think my problem is in the initial setup, although I cannot find and error in the Windows/inf/setupapi.app.log and setupapi.dev.log that would suggest there is an driver problem.
The DART logs are a bit cryptic, but nothing stands out that would give me any idea as to what might be blocking the creating of the Network adapter the VPN Client would use to connect to the remote network.
Can anyone here point me in the right direction - I am not receiving help from configuration management - their solution is to format my entire computer and rebuild it which will cost me weeks of time and I have a deadline looming in Feburary.
Thank you!
Michael

Hi Jacob,
Let's try this & report the outcome...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
Is that Interface dragged to the top of Network>Show:>Network Port Configurations and checked ON?
The Interface that connects to the Internet, needs to be drug to the top of System Preferences>Network>Show:>Network Port Configurations and checked ON.
10.5.x/10.6.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
The interface that connects to the Internet should be dragged to the top of the list.
Then highlight the interface you connect with, click Advanced, is it set to Using DHCP, what IP does it Show & Router IP, then click on Proxies tab & make sure none are set, click on the DNS tab and enter these numbers...
208.67.222.222
208.67.220.220

11122 Installation Issue

We are trying to install 11.1.2.2 in Linux server, but we are not able to run Installtool.sh, any one has faced the same issue? we had installed 11121 in Linux, we didnt face any issue on linux, but in 11122 we are not getting GUI pop up windows to proceed with installation. its 64-bit server.
Please help.
Note: used x-windows to export display server and xclock is wrking fine.

thanks for the update, we are trying to run through -console option, installation done, but we r facing issues with configuration as its saying jar files missing, can you please help if any environment variables need to set up on linux for hyperion 11122, are we missing anything? please help.

HP Photosmart D7360 -- Driver/Installation issue

For some reason my HP Pavillion Laptop no longer recognizes my HP Photosmart printer. I have downloaded the drivers, I have the disk and no matter what I do, I can't get the printer driver to install.
It tells me that it can load verythign BUT the driver. Any ideas?
Thanks
jstjohn

Welcome to the forums @Pierre-Louis ,
I read about the installation issue you're having with your Photosmart C4280 on Windows 8. I have a guide that I have heard successful results from and I hope they work for your scenario as well!
Click this link to get started: A 'Fatal Error' (MSI error) Displays on the Computer During HP Software Installation in Windows
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Photoshop CS6 Installation issues

Anyone on 10.7.5 having PSCS6 installation issues after trying to apply update via Creative Cloud?

This link took me to location where I chose the appropriate version of Bridge update and it worked. My verion was updated to 5.0.1.23
http://www.adobe.com/support/downloads/product.jsp?product=108&platfor m=Windows

When installing itunes 10.5.1 for win 7 64 bit get message that installer is 32 bit.

Atempted to install itunes 10.5.1 for Win 7 64 bit. Receive dialog box that the installer is 32 bit. Points me to an address in Apple for Bonjour Print Services for Windows. After clickin on OK the install proceeds but Itunes will not start.
Itunes has also reformated the library so an older version of itunes can nolonger read the file.

I got the same message about the network resource that I can't access. The only difference is that I couldn't install Itunes 10.3 because I can't remove the old version of Bonjour. I couldn't get rid of anything in add/remove programs, but I went into my program folders and deleted everything that had to do with Itunes. I also ran a Windows Cleanup Utiltiy. Nothing will work. I still can't remove Itunes, Bonjour, Quicktime, MobileMe Control Panel, Apple Mobile Device Support, Apple Application Support, or Apple Software Update in add/remove programs because they are on a network resource that I can't access even though I deleted them from the program folders. This is very frustrating!

NWDS installation issue - "Please wait... completing the install"

Hi all,
I got the same "Problem" each time I update my NWDS.
[Re: NWDS installation issue.|Re: NWDS installation issue.]
After the installation, when I start the NWDS I get always the message:
"Please wait... completing the install"
If I create a new Workspace this really solves the problem but I don't like to create every time a new workspace after an update and copy all my projects back to this new workspace.
Is there no other solution around? I think I'm not the only one who has this troubles, am I?
Regards,
Stefan

Hi all,
I solved this problem by myself. So for everyone who is interested in how to solve this problem:
Just delete the folder .config in
\workspace\.metadata\
During the next start of NWDS this folder will be created and everything will work as excpected!
Stefan

Adobe AIR Installation Issue

Hi,
I am facing an installation issue with AIR file on multiple machines.Though I am able to install it on some machiens.Below is the log for same.
[2011-08-05:11:56:02] Application Installer begin with version 2.7.0.19530 on Windows XP x86
[2011-08-05:11:56:02] Commandline is: E:\ASMTv3India\ASMT2011_Beta-4Aug2011\ASMT2011_Beta.air
[2011-08-05:11:56:02] Installed runtime (2.7.0.19530) located at c:\Program Files\Common Files\Adobe AIR
[2011-08-05:11:56:02] Unpackaging file:///E:/v3India/App_Beta.air to C:\Documents and Settings\Media\Local Settings\Temp\fla2D.tmp
[2011-08-05:11:56:03] Application signature verified
[2011-08-05:11:56:03] Unpackaging/validation complete
[2011-08-05:11:56:03] No app located for appID 'App2011-Beta' and pubID ''
[2011-08-05:11:56:12] Converting unpackaged application to a native installation package in C:\Documents and Settings\Media\Local Settings\Temp\fla3B.tmp
[2011-08-05:11:56:18] Native installation package creation succeeded
[2011-08-05:11:56:18] Starting app installation to C:\Program Files. Installing app ASMT2011-Beta version v3.010 using the source file at file:///E:/v3India/App_Beta.air
[2011-08-05:11:56:18] Installing msi at C:\Documents and Settings\Media\Local Settings\Temp\fla3B.tmp\setup.msi with guid {EBF346A2-FD8C-08C2-07E8-AA91ABD1CAE6}
[2011-08-05:11:56:21] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1618" errorID=5008]
[2011-08-05:11:56:21] Rolling back install of C:\Documents and Settings\Media\Local Settings\Temp\fla3B.tmp\setup.msi
[2011-08-05:11:56:21] Rollback complete
[2011-08-05:11:56:21] Got an unexpected fatal error while in stateInstalling: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1618" errorID=5008]
[2011-08-05:11:56:28] Application Installer end with exit code 7
Please do the needful.
Thanks & Regards
Vishal

Ok, I understand. So before we continue, we really need to figure out what the exact error is. Can you, on at least 2 systems, generate the MSI logs we'll need? Here's a document that explains how to enable logging and where to find the logs once they've been created:
How to enable Windows logging
Once you've enabled logging, try installing again. Grab the newly created msi logs and either post here or email me at [email protected] I'll examine the logs and see if we can find a common issue between the systems.
Thanks,
Chris

InCopy Installation Issues 32-bit

Similar Messages

Maybe you are looking for