Incorporating .jar files into Batch files

Hello, I've created an application that requires .jar files to operate correctly. I was able to get them into eclipse, which made me happy. I was able to figure out how to get them into a .html file when I went to put it on the web which made me even happier. But, then I discovered that I cannot use a html file to call it because of the security access exceptions that are ensued by placing the application on the web. I've come to the conclusion that I will use a Batch file (.bat) to run the app. The way I knew how to get them into the html file was to use:
<applet code="MYCLASS.class" archive="MYCLASS_JARFILE.jar">
</applet>Now I need to figure out how to achieve the same effect as that into a batch file that uses:
java MYCLASSAny help would be greatly appreciated. Thanks.

The applet uses I/O from a MySQL server. When launching it through the website (Not where the database is hosted from) the applet causes the following exception:
java.net.SocketException: java.security.AccessControlException: access denied (java.net.SocketPermission 127.0.0.1:3306 connect,resolve)The applet in the end will be placed on the same server as the database but I was unsure if this issue would still persist, assuming it would I converted the applet into and executable JAR file and run it through the batch file which does not cause the same error.
I read up on the signing applets and such and saw in most forums and articles, that it was a hard way to go and was a hassle. I also found out other articles advocating the use of applet--->servlet--->database however, I know very little about servlets. Currently I only have a semester of Java and have been constantly practicing it since the end of the semester. I learned MySQL and how to use it and right now I have an applet that stores and reads data from the MySQL server I've set up on my home network and uses a java applet GUI to allow manipulation of the data.
Edited by: sfeher1 on Jul 21, 2009 9:36 PM

Similar Messages

  • How To Divide Source File Into Smaller Files Without Exporting?

    Hello Everyone,
    I'm a beginner with PPro CS4 and to video editing in general. I've done a lot of Googling and searching of these forums to get an answer to this question, but I haven't found a clear answer. Here's my problem:
    I have many hours of HDV footage shot over the past few years with a Canon HV30. This footage is on dozens of DV tape cassettes. I want to capture most of it to disk.
    When I capture a tape to disk, I get a single large mpeg4 file. (PPro captures all HDV footage to mpeg4.) "Scene select" doesn't work with the HV30, so my only other way to make smaller capture files would be to set In/Out points with batch capture. But this would mean hours of fast-forwarding and reversing with the VCR-like controls on the camera to review all the tapes and set the points. I thought it might be FASTER to simply capture an entire tape in one operation, THEN review the captured tape within PPro (it's much faster using the scrubber), and dividing that file into smaller files within PPro, thereby avoiding all the mechanical fast-forwarding and rewinding on the camera itself.
    But the only way I can find to do this seems to involve EXPORTING clips. Am I wrong to think that exporting a clip to a new file involves a degradation of the original mpeg4 source file? Or will there be no loss to the quality if I simply export to mpeg4 format?
    It seems there should be an easy way to simply divide the original capture into smaller source files for later editing, without putting the footage through another generation of processing (exporting), which might entail some loss of quality. Or am I wrong about this?
    (CS4 Master Suite, i7 3630k, 16GB RAM, C: 256GB SSD, D: 1T Setpoint F3, E: 1T Setpoint F3)

    HDV footage is mpeg2 (whats in a number ). CS4 does not do scene detect you need to use HDV split for that.
    http://strony.aster.pl/paviko/hdvsplit.htm.
    You can run your already captured files through hdv split and it will chop the file into clips and off you go.

  • Convert XML file into PDF file

    <b>XML to PDF</b>i want to Convert XML file into PDF file pl. any one can suggests API's

    Hi,
    There are many ways to convert XML files to PDFs through java.
    One of the easiest way is by using iText.jar which have classes for conversion.
    The following are the required steps
    1. Create a document object for the XML file ( Using DOM or SAX parser).
    2. Parse the xml document and extract the content to write in PDF.
    3.Create a itext Document object.
    4.Get a PdfWriter instance for the PDF file.
    5.Write in the pdf the extracted text using the document object.
    Refer <a href="http://itextdocs.lowagie.com/examples/com/lowagie/examples/general/HelloWorld.java">here</a> for a simple pdf writer example.
    Refer <a href="http://java.sun.com/developer/codesamples/xml.html">here</a> for examples of XML Parsers.
    Regards,
    Uma

  • How to update link and import data of relocated incx file into inca file?

    Subject : <br />how to update link and import data of relocated incx file into inca file.?<br />The incx file was originally part of the inca file and it has been relocated.<br />-------------------<br /><br />Hello All,<br /><br />I am working on InDesignCS2 and InCopyCS2.<br />From indesign I am creating an assignment file as well as incopy files.(.inca and .incx file created through exporing).<br />Now indesign hardcodes the path of the incx files in inca file.So if I put the incx files in different folder then after opening the inca file in InCopy , I am getting the alert stating that " The document doesn't consists of any incopy story" and all the linked story will flag a red question mark icon.<br />So I tried to recreate and update the links.<br />Below is my code for that<br /><br />//code start*****************************<br />//creating kDataLinkHelperBoss<br />InterfacePtr<IDataLinkHelper> dataLinkHelper(static_cast<IDataLinkHelper*><br />(CreateObject2<IDataLinkHelper>(kDataLinkHelperBoss)));<br /><br />/**<br />The newFileToBeLinkedPath is the path of the incx file which is relocated.<br />And it was previously part of the inca file.<br />eg. earlier it was c:\\test.incx now it is d:\\test.incx<br />*/<br />IDFile newIDFileToBeLinked(newFileToBeLinkedPath);<br /><br />//create the datelink<br />IDataLink * dlk = dataLinkHelper->CreateDataLink(newIDFileToBeLinked);<br /><br />NameInfo name;<br />PMString type;<br />uint32 fileType;<br /><br />dlk->GetNameInfo(&name,&type,&fileType);<br /><br />//relink the story     <br />InterfacePtr<ICommand> relinkCmd(CmdUtils::CreateCommand(kRestoreLinkCmdBoss)); <br /><br />InterfacePtr<IRestoreLinkCmdData> relinkCmdData(relinkCmd, IID_IRESTORELINKCMDDATA);<br /><br />relinkCmdData->Set(database, dataLinkUID, &name, &type, fileType, IDataLink::kLinkNormal); <br /><br />ErrorCode err = CmdUtils::ProcessCommand(relinkCmd); <br /><br />//Update the link now                         <br />InterfacePtr<IUpdateLink> updateLink(dataLinkHelper, UseDefaultIID()); <br />UID newLinkUID; <br />err = updateLink->DoUpdateLink(dl, &newLinkUID, kFullUI); <br />//code end*********************<br /><br />I am able to create the proper link.But the data which is there in the incx file is not getting imported in the linked story.But if I modify the newlinked story from the inca file,the incx file will be getting update.(all its previous content will be deleted.)<br />I tried using <br />Utils<IInCopyWorkflow>()->ImportStory()<br /> ,But its import the incx file in xml format.<br /><br />What is the solution of this then?<br />Kindly help me as I am terribly stuck since last few days.<br /><br />Thanks and Regards,<br />Yopangjo

    >
    I can say that anybody with
    no experience could easily do an export/import in
    MSSQLServer 2000.
    Anybody with no experience should not mess up my Oracle Databases !

  • How to convert a .class file into .java file without .jad using DeJDecompil

    Hi all,
    I am using DeJDecompiler and working with swing applications.If I try to convert a .class file into .java file,it is converting into .jad file only.Fine but if I try to save that file into .java file,It is giving lot of errors in that program.When I went into that program the total style of the program is changed and TRY-CATCH block is not recognised by the dejdecompiler,hence If I try to include some methods in the existing .java file thus got,I could not do.Kindly help me.
    If I get the .java file without error then I can process the rest of the functionality.
    Thanks in advance
    With kind Regs
    Satheesh.K

    Not so urgent today then!
    http://forum.java.sun.com/thread.jsp?thread=553576&forum=31&message=2709757
    I'm still not going to help you to steal someone�s code.

  • How do i merge multipule pdf files into one file?

    how do i merge multipule pdf files into one file?

    One method:
    Open Acrobat XI Pro - use this "click path":
    File :: Create :: Combine Files into a Single File
    Be well...

  • How do I merge 2 pdf files into one file?

    How do I merge 2 pdf files into one file?

    I use PrimoPDF (free download) to create pdf files. To merge two docs/pdfs/etc., print the first to a new pdf using Primo. Close it, then print the second and save it to the same new pdf. Primo gives you the option to 'append' or 'overwrite' the original file. By using 'append', you are just adding it to the back of the existing file. You can do this repeatedly to resort or combine existing pages into a new pdf.
    Also, I'm using Adobe Reader X.

  • How to include external .js file into .ear file using NetBean 5.5.1?

    is it possible to include external .js file into .ear file using NetBean 5.5.1? if not, then where should I placed the external .js file and how to write the src="xxx" element? (that is , how to write the path of "xxx"?)
    I am using JBOSS 4.2.2 GA as server
    thx!!

    Even this is also not possible because, the code in that package is developed by DWR and i am just adding it to my lib folder and importing the respective classes. In the same manner i need to include the *.js* file in the JSP.It took me about 3 minutes reading through the [DWR Getting Started|http://getahead.org/dwr/getstarted] page to learn that you don't have to do any of that. Perhaps you should read that page?

  • I want to merge mp3 files into one file so i can play a mix in i tunes without pauze

    i want to merge mp3 files into one file so i can play a mix in i tunes without pauze

    Audacity is what you need.
    Obviously you need to create a new MP3 file of the combined songs and not delete the originals.
    If your DJ-ing and/or just have too many songs to do that, then look at the free VirtualDJHome version, gives you a lot of control over your music playback.

  • Can I insert the image file into PDF file  in Adobe X Standard ?

    can I insert the image file into PDF file in Adobe X Standard ?

    http://matt.coneybeare.me/how-to-make-an-html-signature-in-apple-mail-for-maveri cks-os-x-10-dot-9/

  • How to send automatic mail and put attache file on batch file ?

    how to send automatic mail and put attache file on batch file ?
    START MAILTO:[email protected]?SUBJECT=PHONE%CALL^&BODY=Testing

    Hi,
    Do you want to use a batch file to create new email message (including recipients, subject and email body) with attachments? If so, I'd recommend you post your question in the Scripting Guys forum for further assistance:
    https://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
    Please feel free to let me know if I've misunderstood something.
    Regards,
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • I purchased the package that allows you to export PDF files into Word files.  Whenever I try to export the PDF into a Word file it never works...  I don't know if there's something key that I'm missing but I'm pretty bummed I paid for it and it won't work

    I purchased the package that allows you to export PDF files into Word files.  Whenever I try to export the PDF into a Word file it never works...  I don't know if there's something key that I'm missing but I'm pretty bummed I paid for it and it won't work.  Can anybody help me out?

    Hello,
    I have paid for this service for a year and it never worked on my computer.  I just renewed and it finally converted the file but it will not let me edit it.  I join you in being bummed.  Either I get help with this or I am asking for a 2 year refund.   My intention was to be able to edit a pdf in MS Word. 
    pfierrorob

  • Converting html file into zip file and send email attaching zip file

    Hi Experts,
    I am trying to send email with attachment(html). Which contains more than 7MB. So, It is throwing an error like Size exceeded.
    So, Now i need to compress the data for less than 7MB.
    I decided to convert HTML File into ZIP File.
    Kindly suggest me to convert the HTML file into ZIP file and sending email with attached ZIP file.
    Correct answer rewarded,
    Thanks & Regards,
    N. HARISH KUMAR

    Hi Experts,
    *// HTML_TAB converting into ZIP File
       DATA  : zip_tool TYPE REF TO cl_abap_zip,
               filename TYPE string ,
               filename_zip TYPE string .
       DATA  : t_data_tab TYPE TABLE OF x255,
               bin_size TYPE i,
               buffer_x TYPE xstring,
               buffer_zip TYPE xstring.
    filename = text-007.                                                                          "'HTML_TAB
    *describe the attachment
       DESCRIBE TABLE html_tab LINES tab_lines.
       bin_size = tab_lines * 255.
       CALL FUNCTION 'SCMS_BINARY_TO_XSTRING'
         EXPORTING
           input_length = bin_size
         IMPORTING
           buffer       = buffer_x
         TABLES
           binary_tab   = html_tab.
       IF sy-subrc <> 0.
    *     message id sy-msgid type sy-msgty number sy-msgno
    *     with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
       ENDIF.
    *create zip tool
       CREATE OBJECT zip_tool.
    *add binary file
       CALL METHOD zip_tool->add
         EXPORTING
           name    = 'FSSAI_MAIL.HTML'
           content = buffer_x.
    *get binary ZIP file
       CALL METHOD zip_tool->save
         RECEIVING
           zip = buffer_zip.
       CLEAR: t_data_tab[],bin_size.
       CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
         EXPORTING
           buffer        = buffer_zip
         IMPORTING
           output_length = bin_size
         TABLES
           binary_tab    = html_tab.
    Thanks & Regards,
    N. HARISH KUMAR

  • About download file into unix file

    Hi expert,
    i use the openset to write file into unix file server.
    but why there are some space at the end of every line.
    by the way, i works very well in windows server
       DATA: DATA_TRANSFER(70).
        Data: DATA_TRANSFER type string.
        data: fine_riga1(1) TYPE X VALUE '0D0A'.
        DATA: gt_data TYPE STANDARD TABLE OF ty_data.
        Constants: ascii_tab type x value ','.
        field-symbols: <f> type any, <delim> type any.
        "Assign delimiter field such as tab or comma.
        assign ASCII_tab to <delim>.
        CLEAR VN_CNT.
        concatenate DSNU 'employee' PN-BEGDA SY-UZEIT into P_UNIX.
        OPEN DATASET P_UNIX in legacy text MODE FOR OUTPUT. " IN TEXT MODE encoding UTF-8.
        IF SY-SUBRC <> 0.
          WRITE: / 'Error on file open:', P_UNIX.
        ELSE.
          LOOP AT TI_DATA .
            CLEAR DATA_TRANSFER.
            concatenate TI_DATA-TYPE
                              TI_DATA-PERNR
                              TI_DATA-ZAUSW
                              TI_DATA-ENAME
                              TI_DATA-TERID
                              INTO DATA_TRANSFER separated by cl_abap_char_utilities=>HORIZONTAL_TAB.
            CONDENSE DATA_TRANSFER NO-GAPS.
            TRANSFER DATA_TRANSFER TO P_UNIX.
            ADD 1 TO VN_CNT.
            CLEAR DATA_TRANSFER.
          ENDLOOP.
          CLOSE DATASET P_UNIX.
        ENDIF.
        WRITE: / P_UNIX,
               / 'Transfered', VN_CNT, 'records'.
    Best Regards,
    Kevin

    Hi,
    Try this way...
    TRANSFER dobj TO dset [LENGTH len]
                                          [NO END OF LINE].
    Addition 1
    ... LENGTH len
    Effect
    This addition determines how many characters or how many bytes of data object dobj are written to the file. len is expected to be a data object of type i that contains the number of characters or bytes. In text files, the content of len specifies the number of characters that are written from the storage. For binary files, legacy text file, and legacy binary files, len specifies the number of bytes that are written to the file. The first len characters or bytes are transferred and alignment gaps are included in the structures. If the addition LENGTH is not specified, all characters or bytes are transferred.
    If the value of len is less than or equal to 0, no characters or bytes are transferred. If the file is opened as a (legacy) text file, however, a line end marker is inserted into the file by default. If the value of len is greater than the number of characters or bytes in dobj, hexadecimal 0 or blank characters are transferred to the file instead of the missing bytes or characters, depending on whether the file was opened as a (legacy) text file or a (legacy) binary file.

  • How can convert HTML file into xml file?

    Hi,
    I am receving one HTML file as an input and i want to convert that receiving(html file) into .xml file.Is there any converter (tools)to do this.Pls if any give me the details with regard.
    Regards,
    mahesh.

    Use the HTMLEditorKit to parse the html file.
    this kit is having the callback methods which
    are called wenever the tag appears in the HTML
    stream.

Maybe you are looking for