Incorrect alignment (text and graphics) in Safari

I recently updated my website and am now experiencing problems with the alignment of my text/graphics (all created in iWeb) when viewed in Safari 5.0.2. I'm using Arial Black and Arial Narrow (Bold). Any other fonts used on my site are jpegs from Photoshop.
Here's a link to the offending page: http://www.ryanfirpo.com/filmmaker/Films.html
Here's a pic in case it looks correct on other computers:
(the text "The Delivery Man" and others is improperly aligned and all the little lines I created between each "Watch Trailer/Watch Clip" is completely off)
It doesn't seem to be a Safari problem because I checked it on another MacBook (running Safari 5.0.1) and it looked the same.
When viewed in Firefox (most updated version) everything lines up perfectly. All my software is completely up to date.
I followed the instructions for clearing out iWeb Cache/Preferences Old Toad posted in this thread: http://discussions.apple.com/thread.jspa?messageID=12010231&#12010231
I also validated my fonts in Font Book, but there was no change. Any suggestions?

Bonjour
Use only one text box per film
Don't insert an image over the text box, as you can see the text don't have the same length in the different browsers (It's a fact). Prefer to insert an image in the text (like a word). in your case, you can't use this image between two words, but you can use this vertical line "| " (cmd shift L).
Here's what I propose, and how its displays in the different browsers.
!http://img245.imageshack.us/img245/9564/layout1h.jpg!

Similar Messages

Pixelated text and graphics in MacBook Pro Retina

Why are text and graphics in pixelated in Numbers and iBooks applications, to name two, on the MacBook Pro Retina? All updates have been downloaded.

Clinton- The problem is that the way things are setup is a bit confusing. Apple doesn't let us use the actual full resolution of 2880 x 1800, in relateive size. There is a hack to see the screen at full native resolution, and it's unbelievably small. So what they do is use the pixels, but use 4 vs 1, and thus they make the UI look like it would look as standard 1440 x 900 display. I have an old 15" and looking at both, the UI is the same relative size on the screen. However the retina is using more pixels to make the same physical size.
Now, Apple also lets apps use 1:1 within their "working area." For instance, if you view a graphic on a web page, it shows it doubled, and pixelated. But if you drag that image to the desktop then open in Preview, preview will show it half size of Safari, but in actual resolution. it's sharp, but half the size of Safari, as Safari is doubling it. So apps can take advantage of that but will have to be updated. Pixelmator isn't updated, and graphics/text/vectors are blurry in their work area, but once you save/export, and view in preview, they are perfect.
So there is going to be a lot of strange stuff going on until everyone gets on the same page.
I did find you can view Pages/Numbers with better resolution (just not icons) by right-clicking "get info" and unchecking open in low resolution. But Pages acts weird. I will post a screenshot in a minute about what I mentioend about apps using the native resolution within work spaces.
Bryan

Why won't text and graphics line up in adobe premiere?

Hey, I have been out of the editing thing for about 8 years now. I recently needed to make a video for another business I run.
Anway, I am using animated / still graphics and the basic text titles that come with premiere. I see that the graphics line up correctly behind the text in the Previews Folder. When I render it, the text has shifted down completely. Also, the text and graphics look horrible after it's rendered, very pixelated. I used to be a pro at this stuff and in fact, I would use flash to import my animated graphics. But it seems that doesn't work anymore either. (That would probably solve this problem too). Anyone know why this is taking place in the final render??
I would much rather you ask the questions before i post all sorts of unnecessary info.
Premiere Pro 1.5.1
Thanks!

1. not sure what you mean by "preset". The project settings are:
General -
Capture - DV 1394 -
Video Sequence -
Default Sequence -
2. The dimensions of the stills are 2000x2000, *.png
3.Titles - I do not align them here, I align them in the effects controls
4. Screen Cap
5. Export settings
6. That article is nice, but not what I'm needing. remember, the preview clips shows everything perfectly lined up. but the final export shows all the text being shifted down.
Thanks for the reply, I look forward to a response and I hope these answer your questions.

Is it possible to do a GLOBAL color change for both text and graphics in ACrobat XI?

I used to do this using the Pitstop Pro plugin but now Pitstop is almost $900 and this is the only thing that I would use it for, not worth the investment
I can change text color by selecting individual text items, but I want to change all of the red text into white text
I also need to change all of the red graphics into white graphics and I can't figure out how to do that either
I have a trial version of XI on a Mac and will buy it if it can do what I am trying to do, i.e. global color changes to both text and graphics
thanks!!

I have version 6, but it is way out of date, doesn't work on my current system, I downloaded a trial version of the new one, version 12 I think, now I have to decide if I can afford to buy it, it is not cheap!
oops, sorry, I didn't read your entire message, aargh!
I'll check with them if I can upgrade from this early version, thanks for the suggestion!
(edited because I didn't read properly!)

Copy and paste text and graphics between Flash and Illustrator

When copying text in Illustrator and pasting them to Flash, some text would become drawing objects and some remain text. A drawing object is not editable. If I import the AI file, then text remains text but the placement of graphics can be a little bit off sometimes.
It's just not possible to copy-and-paste text and graphics from Flash to Illustrator.
Is it just me? If not, when will Adobe have better integration between the 2?
Thanks,

Even though you can change your InDesign preferences for Clipboard Handling to allow formatted information to be pasted into InDesign from other programs, unfortunately Illustrator still won't allow you paste in text with formatting. This is due to how Illustrator and InDesign handle text differently. Even if you copy the text from Illustrator and paste it into a program like Word, which has a lot of different ways to handle formatted text, Illustrator just treats text differently than other Adobe applications.

Why are the text and graphic elements are not showing on the iPad

I have a slideshow of pictures full bleed on my inDesign document with text and graphics on top of the pictures (not part of the slideshow).
When I preview on the iPad all I can see is the gallery of images?
Is it not possible to put text on top of a slideshow?
Here it is as it appears on InDesign...
...and here as it appears on the iPad...
Any ideas? I'm pretty new at this, but I couldnt find anything in the forums
Many thanks for reading
Richard

They're called overlays for a reason. You'll need to change the text to an MSO as well.
Select it, create a new MSO, set it to play once no delay, no crossfade.
Other choice would be to put the text into each state of the MSO.
Bob

Why are the text and graphic elements not showing on the iPad

I have a slideshow of pictures full bleed on my inDesign document with text and graphics on top of the pictures (not part of the slideshow).
When I preview on the iPad all I can see is the gallery of images?
Is it not possible to put text on top of a slideshow?
Here it is as it appears on InDesign...
...and here as it appears on the iPad...
Any ideas? I'm pretty new at this, but I couldnt find anything in the forums
Many thanks for reading
Richard

http://forums.adobe.com/message/5246914#5246914

Mac osx lion screen texts and graphics jitter/flicker during scrolling

Hello,
I have recently upgrade my macbook (late 2008, the only aluminum Macbook model) to OSX Lion, and the screen scrolling is causing fatigue to my eyes as the texts and graphics jitter/flicker even at the slowest scrolling speed setting. This problem causes serious discomfort to reading long text on the screen that requires scrolling.
Have anyone experienced this problem? Is there away to make the text scroll smoothly without jitters?
Thanks

HI PAT:
HAPPENING to anyone that has the old Acrylic Cinema displays that use the ACD-DVI adapter.
unplugging the adapter and replugging solves the issue bu it only last for one session if you reboot the flickering comes back so you have to unplug and replug again. is a Pain in the B.
lot of people complaining about it. https://discussions.apple.com/message/16357859#16357859http://
Hope this helps
AppleLou

HP Photo Creations - where's the text and graphics tabs?

I downloaded V 3.5 HOwever I can't seem to find the tabs for text, graphics, etc. All I can find is touchup, crop, red eye, and one or two others. But where is the text and graphics, and the other cool ones.? I'm sure I downloaded 3.5.
melodee007

Hi Melodee.
The additional editing tools appear with collage projects. When you choose basic prints, you'll see only the touchup tools (crop, image adjustments, red-eye, airbrush, tint).
In other words, to add text, borders, and graphics, choose Collage Prints instead of Prints. This link will take you there:
Collage Prints
There are quite a few cool effects in the touchup section, though.
Under Image Adjustments, click Advanced Controls at the bottom of the screen to try the Posterize effect.
Under Airbrush Effects, try the Rub Through, Blur, and Monochrome brushes.
Rub Through loads a photo in the background that's slowly revealed as you paint over the original photo. Blur is good for toning down distracting elements in your picture, making a snapshot look like a photo taken with a fancy lens. The photo below uses both those plus the Monochrome Brush.
Hope this helps,
RocketLife
RocketLife, developer of HP Photo Creations
» Visit the HP Photo Creations Facebook page — news, tips, and inspiration
» See the HP Photo Creations video tours — cool tips in under 2 minutes
» Contact Customer Support — get answers from the experts

How to get my text and graphics to scale with the browser dynamically?

Hi there!
I've run into an issue where, with my design - I'm trying to get text and graphics to scale and move with the browser as someone adjusts it. (As opposed to it moving and falling apart as the browser window gets too small.)
http://www.richardsuchit.com is where it's posted at the moment.
I'd it to maintain it's position in the center of the browser window no matter how small or large, just to adjust in size, rather in position. I wonder if this is possible?
Looking forward to your answers! Thanks.
-Richard

Hi
Here is a sample file of text that re-sizes according to your window size.
https://www.dropbox.com/s/z7hqxejysuxs597/Sample.zip
Regards
Susanta Kumar Muduli

Aligning text and images in a StyledDocument like 'middle' on img in HTML

Hi,
I have a StyledDocument which is a document source for a JTextArea, into which I am inserting combinations of 22x22 images and text strings. This is just a nitpick, and I am hoping someone could assist.
What I would like to do is middle-align the text and images, so that the strings are vertically centered with the images.
You can reproduce this as such:
messagePane = new JTextPane();
messagePane.setMargin( Constants.smallInset );
doc = (StyledDocument)messagePane.getDocument();
Style style;
style = doc.addStyle( "normal", null );
StyleConstants.setForeground( style, Color.BLACK );
StyleConstants.setFontFamily( style, "Verdana" );
StyleConstants.setFontSize( style, 12 );
style = doc.addStyle( "image", null );
StyleConstants.setIcon( style, new ImageIcon( someimageofyourchoice ) );
doc.insertString( doc.getLength(), " ", doc.getStyle( "image" ) );
doc.insertString( doc.getLength(), "some misaligned text", doc.getStyle( "normal" ) );Thanks in advance!
Alex

code correction:
top block:
messagePane = new JTextPane();
messagePane.setMargin( Constants.smallInset );
StyledDocument doc = (StyledDocument)messagePane.getDocument();cut + paste from several separate components...

Best after market effects generators for text and graphics?

Someone posted a link of many different companies that have after market effects you can download to FCE. Does anyone have that link AND what after market programs do you recommend?
All i have is LiveType that came with Final Cut Express, I need to amp up my graphics/text and motion.
I have looked into some BORIS FX but I dont know which is the best?
Can anyone help answer this question based on the information I have given.
(I need Better Graphic/Text Generators, for like lower 3rds etc...)

jrcash2 wrote:
.. I need Better Graphic/Text Generators, for like lower 3rds etc...
define 'better' ...
imho, LiveType offers an exhausting variety of options, for sure you're not limited by 'ready-mades', you can create your very own ones.. your creativity is the limit
plus, LT and/or FC/e allow usage of Photoshop-layers.
simple ex, create a title in PS/elements (=for video, no need for the Big CS-suite), create a 2nd layer with the shadow => in FC/e you can 'animate'/keyframe the shadow and the title independently, e.g. the shadow 'follows' with a little delay the in-flighing text..
many professional lower 3rds are a combo of 'static' grafic plus animation - so, you can 're-enact' this with *two tracks* of grafic + LT titleing.

Highlight text and drag over Safari icon to start a search

A few years back, it was possible in Safari to highlight text and drag and drop it over the Safari icon to instantly start a Google or Yahoo search. That no longer seems to work. Now, I'm running Snow Leopard with the newest version of Safari. Back then, I was probably still on Tiger and whatever the current version of Safari was at the time.
Does anyone know if it's possible to restore that old feature to drag and drop text of the Safari icon to start a search?

Nobody knows what I'm talking about?

Both the Texts and Graphics When I open windows are too large and blurry. Is this anyway I could fix this?

When I open Firefox (Firefox is updated to its latest version) both the text and the graphics are too large. I've tried zooming in and out features, but the texts become unreadable.

CTRL+0 (<--that is a zero) will reset your zoom level on affected pages. Firefox remembers the zoom level you last used on a page.<br />
See Firefox built-in Zoom functions:
*http://support.mozilla.com/en-US/kb/Page+Zoom
*http://support.mozilla.com/en-US/kb/Text+Zoom
If that does not fix the problem, you can try renaming the file (''with Firefox closed; Firefox button > Exit or File > Exit'') '''''content-prefs.sqlite''''' to content-prefs.sqlite.old (or delete the file) in the Profile Folder to reset the page zoom on all sites. That file will be re-created when you restart Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*You can use the following to go to the Firefox profile folder:
**Help > Troubleshooting Information > Profile Directory, click Open Containing Folder
Zoom Add-ons:
*'''''Default FullZoom Level''''': https://addons.mozilla.org/en-US/firefox/addon/default-fullzoom-level/ '''''
*'''''NoSquint''''': https://addons.mozilla.org/en-US/firefox/addon/nosquint/
**More info on NoSquint: http://urandom.ca/nosquint/
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.org/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.org/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.org/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*'''''Next Generation Java Plug-in for Mozilla browsers''''': [https://support.mozilla.org/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

Cisco Objects. Combine TEXT and GRAPHIC

Hi, I'm using the CCM width 7970 Phones.
Two simple questions.
1) How I can display an Image at left and a text description at right through cisco objects?
Can I have an object that mix the CiscoIPPhoneText and CiscoIPPhoneImageFile?
2) In the CiscoIPPhoneText I have a phone number and I would like the user dial it just touching the screen.
I have to use SoftKeys or there is another method?
thanks in advance.

1) You have to build the composite image yourself. This isn't so bad as long as you have at your disposal a good image library, such as .NET or Java.
2) Once you build the code for step 1, use CiscoIPPhoneGraphicFileMenu instead of Text and make a touch-screen region for that number:). Otherwise, if you must use CiscoIPPhoneText, you are right--you must use a softkey for something that the user can push.

Incorrect alignment (text and graphics) in Safari

Similar Messages

Maybe you are looking for