Incorrect call-up of the extraction program

Hi,
I am trying to extract the data from R/3 into BW through a function module( function module based extraction).
I get the error message while trying to extract in RSA6 as
"Incorrect call-up of the extraction program".
Could you please let me know if its the problem in any settings or any other issue.
Thanks
Regds
Gautam

Hi Gautam,
If possible send the Code for your fm....and i think the error shld be name of the data source.
You need to mentioned the name of the data source in your code i_datasource.....
If this help please assign points.
Regards,
Pawan.

Similar Messages

Incorrect call-up of the extraction program---error while extraction

Hi All,
We are loading the data first time(Full update) in BW Production we are getting the below error.
Error message is as follows:
Incorrect call-up of the extraction program R3 8
Errors in source system RSM 340
Details of error are as follows:
Requests (messages): Everything OK
Extraction (messages): Errors occurred
Error occurred in the data selection
We request you help for correcting this error.
Regards
Deva

Hi ,
Here is little more info about error details we see in Status tab of monitor.
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the
regards
Dev

Error 8 when starting the extraction program

HI all
I have the following problem when i start an extraction. "Error 8 when starting the extraction program" I test the Extraction program on the R/3 system(source system) and it works, It displays records. On the target system in the infpk under step-by-step it gives you the error and It does not give a oss number, it only suggest that you need to look for a OSS. We have BW 3.5 installed with ECC 5.0.
Also on the source system Tcode WE02, for the load period id displays the IDOC with a red light with the same error. It displays the partnet, basic type and the port, the Error is marked next to inbound(inbox).
Regards
alex

Alex,
Check the following OSS notes
947690
511475
23538
Even though the note 947690 is for process chain the steps mentioned in this note could cause Error 8 when scheduling a package for extraction. I think in your case the server name or the host name is incorrect. Check the host and the server name in TCODE SM51 and ask basis to look for the same in RFC entries using SM59 as well.
Abdul

The extraction program does not support object 0MAT_PLANT

Pessoal alguém já passou por este problema?
Estou tentando fazer um delta no objeto 0MAT_PLANT, mas me retorna sempre este erro.
Já fiz um novo Init, mas o erro continua.
The extraction program does not support object 0MAT_PLANT
Message no. R3009
Diagnosis
The application program for the extraction of data was called up using the invalid InfoSource/invalid InfoObject 0MAT_PLANT.
System Response
The data extraction is terminated.
Procedure
Check the SAP Support Portal for the appropriate Notes and create a customer message if necessary.

Hi Eduard ,
You can try the following steps to solve that
1. Delete the previous Delta Init for the InfoObject
If you have access to R/3 Side you can follow the steps or you can follow the BW Steps
Goto RSA7 ->Select and Delete the Init Request for the InfoObject
From BW Side
InfoPackage-> Inti for Source System -> Select & Delete
the Init Request
2. Execute the Init InfoPackage for the InfoPackage again.
3. After successful completion, execute the delta InfoPackage.
Hope it solves your problem, if not pls let me know.
Thanks & Regards,
Chandran Ganesan
SAP Business Intelligence

The extraction program does not support object 0JOB_ATTR

HI all,
I'm getting the following error when execting 0JOB_ATTR extractor in R/3 system (via RSA3):
The extraction program does not support object 0JOB_ATTR
Message no. R3009
Diagnosis
The application program for the extraction of data was called up using the invalid InfoSource/invalid InfoObject 0JOB_ATTR.
System Response
The data extraction is terminated.
Procedure
Check the SAP Support Portal for the appropriate Notes and create a customer message if necessary.
I've found various threads with this error (or similar ones), but none of them are solved (or not published solution). Haven't found any SAP notes yet either, so any input would be very helpfull.
Thank you.
G.

0JOB_ATTR not in use and SAP replaced this with 0EC_CJOB_ATTR... U have to use 0EC_CJOB_ATTR to load master data for 0JOB.
Even i faced the same problem and found the following info in one of the SDN thread, and we are using 0EC_CJOB_ATTR (make sure u have data in table HRP5050).
I have sent a message to SAP asking for the solution . Below is the reply what they gave.
"This error appears because of naming conventions we have to switch the name of the Data Source from 0JOB_ATTR to 0EC_CJOB_ATTR. Please use this data source to extract the compensation job attributes to BW.
Note also that data source 0EC_CJOB_ATTR extracts data from table HRP5050.
If no data is being extracted please do the following:
If you have data in HRP5050 and still do not get any data please try the following :
1) Take over the Data Source from the business content (RSA5)again and check in RSA3 .
2) Replicate the Data Source to BW
3) Activate the Info Source again.
4) Delete any previous delta initializations for the datasource.
5) Initialize the delta again
6) Try to load data".

The extraction program does not support object ZTD_AW_17

Hi friends,
When doing extraction I am getting the below error.Please
see the below extract of system response.
"The extraction program does not support object ZTD_AW_17
Message no. R3 009
Diagnosis
The application program for the extraction of data was called up using the invalid InfoSource/invalid InfoObject ZTD_AW_17.
System Response
The data extraction is terminated."
Please help me out.
thanks
Venkat

Hi Venkat,
Have you checked to see if the ZTD_AW_17 infoobject is in your system and active? If not, transport the object from your D system to the P system. Also check the infosource to see if it is active and if the ZTD_AW_17 infoobject is there. If so reactivate the transfer rules and run the extraction again.
Aaron

Error 8 when starting the extraction program (BI7.x)

I am receiving the following message when loading from the ODS to the data targets:
Error 8 when starting the extraction program
Message no. R3019
Diagnosis
Error 8 occurred when starting the data extraction program.
System response
The data extraction is terminated.
Procedure
Check for relevant OSS Notes, or create a problem message of your own.
I have searched the forums and OSS, and can't find anything that matches my situation exactly. I was originally getting an error message that the infosource (80FIA_DS11) didn't exist in the source system. I restored the BIP client and all transfer structures were reactivated. Now when I try to load, I get this error 8. Has anyone experienced this issue?
Thanks,
Pam

Josko,
I am also using BI 7.x and had the problem loading from DSO to Infocube. What are the entries in table ROIDCPRMS? What is the host name displayed when you run transaction SM51 in the BI system?
Pam

Error 4 when starting the extraction program

Hello Gurus,
Yesteday I got one error "Error occured in the source system"that "Error 4 when starting the extraction program" and "error in the source system" has given, it has affected all the loads,please any one give me solution for thia it is urjent.
Please find the error message bello.
Error message from the source system
Diagnosis
An error occurred in the source system.
System response
An error occurred in Service API .
Check the error message.
Procedure
The procedure for removing errors takes place depending on
the error message:
Note
If the source system is a Client Workstation, then it is possible that the file that was to be loaded was being edited at the time of the data request. Make sure that the file is in the specified directory and is
Thanks,
Muddu Reddy.

Hi sekhar,
You can try this. you right click on the datasource and click on display in source system it takes you to the R/3 system enter the user id and password so u can now see the datasource in the R/3 so now click on back f3 so now u vl be in BI now replicate the datasource and try to load the data. I think now it should work fine.
Tell me if you still face some problem.
Thanks
Ram

The extraction program does not support object 6BEREC_REP_CH_PERFORMANCE1

Hai friends,
I am pulling data from Oracle database to BW through UDConnect. When I check in RSA3 for the datasource 6BEREC_REP_CH_PERFORMANCE1, I get the following error:
"The extraction program does not support object 6BEREC_REP_CH_PERFORMANCE1"
What does it mean? Kindly help.
Regards,
Neha Solanki

Hi,
It's not Absolute version. It's obsolete version(means No more)
This will help you:----
The extraction program does not support object 0JOB_ATTR
Regards,
Suman

The extraction program does not support object

I was loading data from R/3 to BW through a Generic Data source. Previously it was loaded successfully but when I loaded last time, there was an error
"The extraction program does not support object <Data Source Name>"
Can somebody help me out please?

Hi,
Please check this.
Loading Problem
Regards.

The extraction program does not support object 0MATERIAL

Hi All,
can you please help me with the issue that we have for some of our Master data load.
Full Loads are working fine, Delta Init is working fine as well. but Delta load is not the error is "The extraction program does not support object 0MATERIAL"
already tried looking for some OSS note but none of them helps.
hope anyone can help me.
Thanks in advance,
Alden

Hi Christopher,
Below is the reply that I got from SAP Consultant:
I assume that this issue was happened after upgrade
which is already mentioned in the consulting notes 1165059 & 1251433:
-> 1165059 ALE: Generating and reading change pointers after Upgrade
-> 1251433 SAPI: Creating and reading change pointers after Upgrade
Can you have a look at these consulting notes to get more information
in details about ALE changing and follow my recommended steps to solve
this problem please:
1. Can you check this affected datasource in table ROOSGEN in source
system and you will find the generated Message Type in MSGTYP:
->Tx. se16 ROOSGEN:
OLTPSOURCE SLOGSYS RLOGSYS MSGTYP ->???
2. Then you can check this Message Type (RS*) in table TBDA2 and you
will see that the flag (BDCP2_ACT) is missing here in table TBDA2 :
->Tx. se16 ->TBDA2:
MESTYP ACTIVE BDCP2_ACT
RS* X (empty!)
3. If the flage (BDCP2_ACT) is missing here in table TBDA2:
Then you have to do the following steps:
->start transaction SALE:
Modelling and Implementing Business Processes
Master Data Distribution
Replication of Modified Data
Activate Change Pointers for Message Type
-> select the affected generated Message Type
-> RS* ->deavivate and activate again
Afterwards the missing flag should be set correct in TBDA2 again.
Please check it first and then you can start the delta upload in
your BW system side again. The data load should work correct now.
After carrying out the above steps we were able to re initialize the master data.
Regards and Thanks,
Vivek

Finding the extraction program.

Hi everybody,
We have the standard datasources(2lis_04_p_matnr & 2lis_04_pematnr)for standard orders& repititive orders.
But these two data source is getting data from same tables(AFKO,AFPO).
Why don't use one data source for this one,why we are using two data sources for this one ?
For filling setup table we have standard programs(RMCFNEUA) .How to identify the programs, while filling setup table i'm identifying system -> statuns .is it correct program ?
If it is correct program,which is showing couple of talbles.But in Lbwe it is showing two tables(AFKO,AFPO).
Here my question is :what is the source table of datasource ? I would like to know logic of program.
Thanks & regards,
Sekhar.

Hi Pierre,
Thanks for ur respone.
I can able to know the function module,but my question is what is the standard program,how should i know the source tables of the data source.
Here standard progarm is showing different tables & LBWE is showing different tables.
Thanks,
sekahr.

How to call BAPI_XBP_JOB_START_IMMEDIATELY in the ABAP program

Dear all,
I call the function 'BAPI_XBP_JOB_START_IMMEDIATELY' to release the backgroud jobs. It does not work. it's remote enable function. Should I use call function 'XXX' destination 'XXX' to call it? How can I check the destination? Thanks for your answer.

Hi,
if the Function module is remotely enabled also, we can call that from same system.If u want to use destination give destination 'NONE',otherwise no need to give destination.
Regards,
Jyothi.

Error 8 when starting the extracting the program-data load error:status 51

Dear all,
I am facing a data exracton problem while extracting data from SAP source system (Development Client 220). The scenario and related setting are as the flowings:
A. Setting:
We have created 2 source system one for the development and another for the quality in BW development client
1. BW server: SAP NetWeaver 2004s BI 7
PI_BASIS: 2005_1_700 Level: 12
SAP_BW: 700 Level:13
Source system (Development Client 220)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: SunOS
Source system (Quality Client 300)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: HP-UX
B. The scenario:
I was abele to load the Info provider from the Source system (Development Client 220), late we create another Source system (Quality Client 300) and abele to load the Info provider from that,
After creating the another Source system (Quality Client 300), initially I abele to load the info provider from both the Source system , but now I am unable to load the Info provider from the (Development Client 220),
Source system Creation:
For both 220 and 300, back ground user in source system is same with system type with same authorization (sap_all, sap_new, S_BI-WX_RFC) And user for source system to bw connection is dialog type (S_BI-WX_RFC, S_BI-WHM_RFC, SAP_ALL, SAP_NEW)
1: Now while at the Info Package : Start data load immediately and then get the
e-mail sent by user RFCUSER, and the content:
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
2:Error in the detail tab of the call monitor as under,
bi data upload error:status 51 - error: Error 8 when starting the extracting the program 
Extraction (messages): Errors occurred
Error occurred in the data selection
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document not posted (red)
bw side: status 03: "IDoc: 0000000000007088 Status: Data passed to port OK,
 IDoc sent to SAP system or external program"
r/3 side: status 51: IDoc: 0000000000012140 Status: Application document not posted
 Error 8 when starting the extraction program
Info IDoc 1 : Application document posted (green)
 r/3 side: "IDoc: 0000000000012141 Status: Data passed to port OK
 IDoc sent to SAP system or external program"
 bw side: "IDoc: 0000000000007089 Status: Application document posted,
 IDoc was successfully transferred to the monitor updating"
Have attached screen shots showing error at BW side.
 check connection is ok, tried to restore the setting for bw-r3 connection though same problem
 Have checked partner profile.
what's wrong with the process? 
Best regards,
dushyant.

Hi,
 Refer note 140147.
Regards,
Meiy

Message no. R3009 - error in extraction program for the DSO

Dear All,
I get the following error, when I execute the data source object, when I select monitor button in the window the process is in Red. So I couldn't get the report at the ODS. Please help me to clear the following error :
The extraction program does not support object ZSHIPTRACKND
Message no. R3009
Diagnosis
The application program for the extraction of data was called up using the invalid InfoSource/invalid InfoObject ZSHIPTRACKND.
System Response
The data extraction is terminated.
Procedure
Check the SAP Support Portal for the appropriate Notes and create a customer message if necessary.
with Regards,
Jerald

What release are you at?
Have you searched SAP Notes and the SDN forums for this. A quick search indicates 9 SAP Notes and 15 SDN posts regarding this error message. Unless we know what release level you are at we are unable to offer viable solutions.

Incorrect call-up of the extraction program

Similar Messages

Maybe you are looking for