Incorrect code page in SE63

Hi,
Several of my Long Text (SE63) Other Long Texts: SAP Forms cannot be translated in SE63.
EX: trying Z_ORDERCONF from EN to SV
It gives me an error "Incorrect Code Page" and nothing more happneds.
During the weekend our SAP Admin did an upgrade to SAP DEV and we run now on SAP_BASIS 620 0060 (before 0059).
Don't now if this has anything to do with my problem...
//MA

You must set up the code page for all target languages. Perhaps OSS notes 73606, 15023, 42305 can help you.

Similar Messages

Smartform Translation using SE63 returns Error 'Incorrect Code Page'

Hi,
I have created a smartform in english & want to translate to Language IT, FR, DE.
I am able to translate it using SE63 for DE but unable to translate to IT, FR.
The error in status is 'Incorrect Code Page'.
Language Attribute is set to : Translate to all Languages.
In SE63 the Source Language: EN, Target Language: IT
The Languages installed in the system is EN & DE only.
My questions on this issue:
1. Is it required the language fonts for IT & FR be uploaded & then the Translation in SE63 work fine ???.
2. Is some other parameter needs to be set.
Rgds
Vincent

If you need to translate the Smartform to any target language the Target Language must be intalled in the SAP System. The error occurs because IT, FR is not installed in the SAP System.
Installing the Language Code pages will solve the problem.
Hope That Helps
Anirban M.

Incorrect russian code page in messages in iAS 9i and Oracle8i R3

The Oracle iAS 9i and Oracle 8i Release 3 for Windows NT has strange code page for this platform: ISO-8859-5 (UNIX Russian), but must be CP-1251 (Windows Russian). I can't install iAS on Windows platform, because messages in installer not correspond platform code page and unreadable :(
May be you know any patches for correct this problem?
null

Hello again Jan,
I think this might help...
From Note 187898.1 (http://meatlink.oracle.com) ->
"When you specify the preference PARSER=YES to enable
PL/SQL definitions to be parsed during server generation,
missing BEGIN and END statements will be added at the beginning and the end of a PL/SQL block, missing DECLARE statements added for triggers, etc.
When the preference PARSER is set to Yes, generation of the larger packages takes a lot of time - this might use up your CPU and virtual memory (Bug 1569508 fixed in 6.5.84 ) and ALSO will be unable to add begin/end
correctly if there are any syntax errors in the <declarations> or <statements>.
Hence you might see the CDS-11321, CDS-11307 warnings
and finally PLS-103 compilation error when generating
to the database. All these packages have somewhere in
it PL/SQL code having 'begin' or 'end' words within the
code (as strings).
This was recorded as a bug and fixed from 6i Release 4.3
or 9.0.2.1.0 onwards. You could use PARSER=NO instead
(especially if you're using a previous version that
included the bug).
Hope this helps.
Regards,
Dominic

Open data set / code page

Hello ,
I am sending file to print server and i am accounting problems with special characters
In first version of program ( please see the code below )
"OPEN DATASET g_filename FOR OUTPUT IN TEXT MODE ENCODING DEFAULT."
The special characters l from German and French   alphabet were NOT printed properly , and we had some nonsense results . Other '"Normal "characters like A , B... are printed without errors .
To prevent this error i wrote new line of code for open data set ( below ).
"OPEN DATASET g_filename FOR OUTPUT IN   LEGACY TEXT MODE CODE PAGE '4110' IGNORING CONVERSION ERRORS."
This was working only when FTP was NOT used , when FTP was used i had following short dump.
I am working in SAP release 6.0
Please Advice
SHORT DUMP Message :
What happened?
    The conversion of texts in code page '4102' to code page '4110' is not
    supported here.
    The current ABAP program 'SAPLZPRN_AUTO_LBL' had to be interrupted because
     incorrect
    data would have been created by the conversion.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_CODEPAGE_CONVERTER_INIT', was
     not caught in
    procedure "Z_TRANSFER_FILE" "(FUNCTION)", nor was it propagated by a RAISING
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    Possibly, one of the codepages '4102' or '4110' - needed for the
    conversion - is unknown to the system. Another option is, that a Unicode
     codepage was specified for a file in LEGACY MODE, which is not allowed.
    Additional parameters for the codepage conversion (as , for example, the
     replacement character) might have invalid values. You can find further
    information under 'Inernal notes'.
    If the problem occurred at opening, reading, or writing of a file, then
    the file name was '/te/mm/labels/0488_20091208_051317_EC008119_01_001.dd'.
     (Further information about this file: " X ")

Hi,
Also check the character set supported by the Printer. Printer configuration should also be checked on SAP side to determine character set and code page using SPAD.
Regards,
Nishad

Could not find code page for receiving system

Hi Experts,
When I scheduled a PC i got this Error Msg. What is the real cause and how can i correct it?? Thanks
Dave
"Could not find code page for receiving system"

Hi Praveen,
The detailed error msg says the following.
Error when updating Idocs in Business Information Warehouse
Diagnosis
Errors have been reported in Business Information Warehouse during IDoc update:
Could not find code page for receiving system
System response
There are IDocs with incorrect status.
Procedure
Check the IDocs in Business Information Warehouse . You can get here using the BW Monitor.
Removing errors:
How you remove the errors depends on the error message you receive.

Infopackage Idocs in status 2 - could not find code page for receiver system

Hi,
We just migrated our production system from BW 7.01 non unicode to BW 7.4 on HANA.
We now encounter issues with idocs while loading data into bw from our ECC5 source. When we analyze idocs in the source system it appears with the message "could not find code page for receiver system"
One weird thing is that the idoc seems to have been created before we started the infopackage in bw.. We controlled system time and AS time and everything seems ok.
We did not encounter this issues on our previous migration test runs..
Hope someone can help
Christophe

Hi,
Thanks for responding. We finally found out what the problem was.
We have two applications servers on our ECC with 2 different OS. One of them could not reach the new BW HANA server.
Regards
Christophe

Code page issue - Unix file(s) content display in a report output

Hi All,
I am trying to retrieve file from Unix server and display in my report output.
I have written code as below:
OPEN DATASET filename FOR INPUT IN TEXT MODE ENCODING DEFAULT.
DO.
READ DATASET filename INTO i_tab-line.
ENDDO.
CLOSE DATASET.
1. Now i am able to display files of type .txt in report output but with line numbers above each line.
How can i avaoid it! I want to display as it looks in AL11 view.
2. If i am displaying files of type .PDF it is giving dump with below message:
A character set conversion is not possible.
At the conversion of text from code page '4110' to '4102' is not possible.
- a character was found that cannot be displayed in one of the two code pages;
- or it was detected that this conversion is not supported.
How can i display the .PDF (or) all types of files in my report as it is viewable in AL11.
Can anybody solve this this.
I have tried UTF-8 & NON-UNICODE options with ENCODE also they are also giving same dump.
Can anybody resolve these issues!
Thanks in advance.
Thanks,
Deep.

Hi All,
Any resolution for above posted issue!
Thanks,
Deep.

How to change the default code page in SAP?

My colleague tries to download a report in Excel but she is having some problems with the output as each of the lines are all included in one cell. When I download the same report, my output is fine and the columns in the lines are properly aligned in various columns in Excel.
I noticed that her code page is 4110 and mine is 1160.
4110 Unicode UTF-8
1160 Microsoft 1252, Superset of ISO 8859-1
As a workaround, I just asked her to modify the code page to 1160 everytime she downloads a report. I want to know how this setting is derived.
My questions are:
1) Is there a way to set the default code page?
2) Is this a problem with the SAP version? If she downloads another SAP GUI, will the issue be gone?
Thanks!
Joey

1, You can change the codepage in SAPGUI: Select the system => Properties => Others
2, Could be, best is to have the same and most up to date SAPGUI for all

How to change a Code Page in SAP SCRIPT ?

I have a specific requirement, would need your help :
There is a CODE PAGE which is getting assigned to the SAP SCRIPT FORM. For E.g : 1100 is generally used for SAP SCRIPTS.
I would like to know if there is a possibility to change the Code Page based on certain conditions ??
Also i would like to know how and where is a CODE PAGE and SAP SCRIPT FORM linked.
I have analysed that a default code page can be set in the SAP LOG ON PAD but not able to find the issues mentioned above.
Kindly help me out with your valuable suggestions and solutions.
Thankyou
Brijesh.

Hi,
MDMP means Multi Display Multi Processing. See the note system for details. The problem of MDMP is that the different languages use different codepages and not all characteres can be displayed in every codepage.
A solution would be a unicode conversion of the system. In unicode there is only one internal codepage, which contains all special characters of the individual languages. However the migration needs several hours of down time and unicode systems need more memory and disk space. I can't tell you a percentage for that. You need at least R/3 4.7 for unicode.
In non-unicode system I believe you can't change the codepage inside a SAPscript document directly. I would have to end form processing an start a new form. To change the language you can try the ABAP-command SET LOCALE. Also see the language parameter in START_FORM.
If that doesn't work I would try using RFC-Connections. Make RFC-Connections in your system which contain the system it self as target system, but with the desired language filled in. You do not need to provide a user or password, that would be taken form the logged on user.
Inside your printing program you put the real printing into a function module. Your report then can call the function via RFC using a connection in the correct logon language.
Greetings

SSIS Error Text was truncated or one or more characters had no match in the target code page

I the same issue or something close.
Except I have one Field (27) that get a trunacation error
Error:
Data conversion failed. The data conversion for column "Column 27" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
The "output column "Column 27" (91)" failed because truncation occurred, and the truncation row disposition on "output column "Column 27" (91)" specifies failure on truncation. A truncation error occurred on the specified object of the specified component.
Data looks like:Red Text is the field that is throwing the error!
00000412,
0000000011411001,
0273508793,
01,
"RUTH           ",
"EDWARDS             ",
19500415,20080401,
"N",
04488013,
"1",
"F",
365094,
20080401,
000472162716,
"1447203880    ",
43995202341210,
00120.000,
0010,
00008.26,
00004.96,
000.00,
00002.70,
00007.66,
0,
"PROMETH/COD SYP 6.25-10 ",
"Y",
"Promethazine w/ Codeine Syrup 6.25-10 MG/5ML               ",
0000,
"001C",
610020,"WELLP1537",
"O",
"N",
00,
"D",
"S",
"G",
"ID01V012008782",
"TOM AHL CHRYSLER              ",
"M",
"M",
"PBD $20/10+40%/20%            ",
00008.26,
"1184641367"

I have found four things that I always check when I run into this problem. I have yet to find a time when one of these didn't work (specifically helps when reading data from flat files but I suppose most of the four would apply to any source). Check out my blog post, content repeated below:
1. Make sure to properly configure the "Flat File Source". When setting the connection properties to the flat file, take time to click on the advanced tab and ensure that the" Name", "DataType", and "OutputColumnWidth" properties are set properly. I have found that if this is setup correctly when the initial connection is created, some if not all of the data type issues and errors can be alleviated. The "Flat File Connection Manager Editor" can be accessed while initially creating the connection or by double clicking on a flat file connection within the "Connection Managers" for connections that have previously been created.
2. Depending on the order and steps that were used to create the connection to the flat file, sometimes the data types need to be updated in an additional area. This can be found by right clicking on the "Flat File Source" and selecting "Show Advanced Editor...". Once in the advanced editor, click on the "Input and Output Properties" tab. Expand the "External Columns" folder. For each field being loaded from the flat file there are some configurable properties. Make sure that the "DataType" field is properly set for each field.
3. Something else that can be done if you are sure that the data type is set correctly in both of the two previously mentioned locations is to set the "Flat File Source" to essentially ignore those annoying truncation errors. On the same "Input and Output Properties" tab, expand the "Output Columns" folder. For those fields listed, there is a "TruncationRowDisposition" property. By default this is set to "RD_FailComponent". This can be switched to "RD_IgnoreFailure" in order to allow the data to successfully pass through the "Flat File Source" even if SSIS believes that truncation is going to occur. Along with making this change, you can also check the "DataType" in the "Output Columns" as well.
Caution: If you do set the "Flat File Source" to "RD_IgnoreFailure" as mentioned above, always take time to review the data loaded in the target table to ensure that the integrity of the data was not jeopardized.
Note: I have found that when the "DataType" for both the "External Columns" and "Output Columns" is manually updated that it does not remain the same when the advanced editor is reopened. For this reason, try Steps 1 and 2 before setting the "Output Columns" manually.
4. The last thing to try, and this applies specifically to loading data from Excel files as opposed to text or CSV is to set the package to run in 32-bit mode. Click on "Project" on the top menu and select "Data Imports Properties...". Click on "Debugging" under the "Configuration Properties" and set the "Run64BitRuntime" to "False".
Working with data from flat files can sometimes be difficult in SSIS. By using one or many of the approaches I have listed above you should be able to create a repeatable process that is frequently needed within most SSIS packages. Be very careful when setting data types within SSIS and make sure to do it upfront when necessary because it can be harder to debug later in the development process. If the proper changes are made it should not be a surprise to feel a big SSIS developer sense of relief when the screen shows all green.
Let me know if this works!
Check out my blog!

What if a person no longer has access to the house in which the card itself, but iTunes recognizes my login, shows my balance, won't let me get past the "code" page?

What if a person no longer has access to the card itself, but iTunes recognizes my login, shows my balance, won't let me get past the "code" page?

What pops up is the page that tells me I can use my camera to take a photo - since I don't have access to the card, useless. I am caught going round in this loop - there's that one button, no other option. Thanks in advance.

Error synchronizing with Windows 7 Contacts: "CRADSDatabase ERROR (5211): There is an error converting Unicode string to or from code page string"

CRADSDatabase ERROR (5211): There is an error converting Unicode string to or from code page string
Device Blackberry Z10
Sw release 10.2.1.2977
OS Version 10.2.1.3247
The problem is known by Blackberry but they didn't make a little effort to solve this problem and they wonder why nobody buy Blackberry. I come from Android platform and I regret buying Blackberry: call problems(I sent it to service because the people that I was talking with couldn't hear me), jack problems (the headphones does not work; I will send it again to service). This synchronisation problem is "the drop that fills the glass". Please don't buy Blackberry any more.
http://btsc.webapps.blackberry.com/btsc/viewdocument.do?noCount=true&externalId=KB33098&sliceId=2&di...

This is a Windows registry issue, if you search the Web using these keywords:
"how to fix craddatabase error 5211" you will find a registry editor that syas it can fix this issue.

IDoc Status 02 ( Could not find code page for receiving system )

Hi All,
I am getting Idoc status 02 when I am trying to send IDocs from ECC to PI system ( Production ).
Error description.
Could not find code page for receiving system
Message no. E0266
Diagnosis
For the logical destination PIP001, you want to determine the code page in which the data is sent with RFC. However, this is not currently possible, and the IDoc cannot yet be dispatched.
Procedure for System Administration
Possible causes are:
1. The entry no longer exists in the table of logical destinations.
2. The target system could not be accessed at runtime.
3. The logon language is not installed in the target system.
4. In the destination system, no logon language is maintained
Please help.
Thanks - Vinay.

Hi Vinay,
Status 02 occurs when data is not passed to port suceessfully. Check the RFC desination is working fine and your able to connect to target system and also check correct port is assigned.
Regards,
Vinod.

Tax entered incorrect (code 5A, amount 0), correct 113 YEN. Message no. FF7

Hi Experts,
We are usnig a Tax Code 5A, which is of 5%. Its a Input Tax Code and has "Check" marked on Check ID field in the Tax Code's Porpoerties Part.
We are trying to posting a document in F-02, and we are manually putting the Tax Amount in the same GL which is assigned to Tax Code 5A.
i guess it should accept the amount which have put manually without poping the error mentioned below :
Tax entered incorrect (code 5A, amount 0), correct 113 YEN. Message no. FF707
Now, more surpirsing is in Prduction server the document got posted and in the Development server the error is thrown.
Experts, please help, since the Client have put forward this question to us.

Hi,
If you want a warning instead of error message, you have to modify tax code properties (transaction FTXP) unflag indicator 'CheckID' in tax code properties.
Also field 'Tol.per.rate' in FTXP in propertiees of the tax code is tolerance percentage authorized foe amount entered in the invoice and the SAP calculation. Usually, we put '0,1' in this field cause you can have small differences beween vendor invoice tax amount and SAP calculation.
Regards,
Gaurav

'Windows-1252', 'Shift-JIS', etc. code pages are not supported encoding names exception in Windows 8.1 Phone

Hi,
We have already released our product for WinRT desktop and tablet versions.
Now we are developing the same app for Windows 8.1 Phone.
We are supporting 'Windows-1250', 'Windows-1251', 'Windows-1252', 'Windows-1253', 'Windows-1254', 'Shift-JIS', 'GB2312' and 'Big5' in both desktop and tablet versions which uses WinRT API's.
But in Windows 8.1 Phone version, i am getting 'ArgumentException' saying 'Windows-1252' is not a supported encoding name.
Please help me with a solution or workaround to support the above specified code pages for Encoding.
Regards,
Balaji Reddy. M

Does CP-1252 work? If not, this page may help:
https://social.msdn.microsoft.com/Forums/windowsapps/en-US/cf5ca6c9-72b0-4abb-9ef5-ff77226ec642/how-to-handle-unsupported-encoding-in-xml?forum=wpdevelop
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

Incorrect code page in SE63

Similar Messages

Maybe you are looking for